Anyway to get 4-pin - 8-pin SSI adapter (for K8N-Master2)

I have a 550W Yesico Fanless PSU (with +12VDC/18A rail), and it lacks the 8-pin SSI connector which is used on the board as PWR2 connector. Is there a 4-pin -> 8-pin adapter available in somewhere?
At the moment I have used a two 4-pin connectors, one standard and one carved with a knife to match the holes on the connector (works fine, it just your standard +12V). And atleast at my setup, I need to hook up all three PWR connectors + PCI-E graphics connector just to power it up. (2*DP240 + GTX7800).

Quote from: fafner on 17-November-05, 01:37:16
Yes any big computer store should have the adaptor you need. I have one in one of my systems.
Ok, have to check out few places then. I haven't seen any on those places I usually shop with. And if anyone knows a place in Finland where to get one, I'd appreciate that.
And for the other suggestions. Do not worry, the PSU has several +12V rails, it has -5V and all the sounds are fine =)

Similar Messages

HT5787 How can you get the pin # you set for as your "Restrictions" reset if you can't even remember it ?

For the children we turned on the restrictions on certain apps/features for iTunes and restricted all access to App Store (kids playing with phone, never know what they might do) but now want it off but can't remember pin? How can I find out about resetting the pin and turning off restrictions?

You can not recover the pin.
You will have to wipe the device and restore as new.
http://support.apple.com/kb/HT1414

Where do I get the AC to DC Power Adapter for a Linksys "Compact USB 4-Port Hub [USBHUB4C]

I have two Compact USB 4-Port Hubs, Model Number USBHUB4C. These Hubs can be powered, but I cannot find any information on External Power Adapters for these Hubs in any of the documentation or on the Linksys Web Site.
I need to know if Linksys has such Power Adapters available, and if so what the Model Numbers are, and how or where to purchase them.
If I will need a third party Power Adapter, I need to know what the Output Voltage & Current requirements are, and I also need to know the Polarity of the of the two Jack Contacts. [i.e. Is the center pin on the Hub's Jack Positive or Negative?] If possible I'd like to have a recommended Brand and Model Number for the Power Adapter.
Thanks In Advance,
Bruce

Friday, August 28, 2009, 0302 PDT
Hi, again,
Boy, am I glad I was able to find an answer to my problem in here. I find this very interesting. Here it is, almost 3 years after I made the original post, that I need to find the Power information, for this Device, again, but because of a Computer Crash, I could not get to the original notes, I made about this Forum Entry, so I began the search, again.
I find this very interesting. Here it is, almost 3 years after I made the original post, that I need to find the Power information, for this Device, again, but because of a Computer Crash, I could not get to the original notes, I made about this Forum Entry, so I began the search, again.
I have myriad AC/DC Converters, some of which are Voltage Selectable, but since the Power Specifications aren't on the HUB, or in the PDF Documentation, as is the case with most other Products, I came back to LinkSys/Cisco. As soon as I entered the Model Number of the "Compact USB 4-Port HUBs, Model Number USBHUB4C," for a search, this Forum entry came up on the page, and it appears there haven't been any queries, on any other subject, about this Device, in the interim.
Since the entry has been Viewed 2,484 times, hasn't it dawned on someone that it might be a good idea to carry a Power Product, that is compatible with this HUB, or at least provide a Specific Source, with a Model Number, (for instance, a Radio Shack SKU) so we don't need to hunt for one, over, and over. Why the information was never included in the package with the HUB, beats me. (It should have been on the Device, itself.)
Anyone who knows anything about USB Devices, knows that many of them cannot be powered from the USB Ports on a Computer, especially, on Laptops. Since one of the things mentioned in the Specifications is the fact that you can have "Max. Devices 127 (Daisy-chaining Hubs Together)," it would seem to be obvious that Power Information would be necessary. Since the "Daisy Chain" number is true, it should be obvious, that the "Chain" would require quite a few AC/DC Adapters to power it, adequately.
When this Device was Designed, the requirement for External Power must have been known, or there would never have been a Power Connector built into the Device. I've been in electronics for about 50 years, now, and I know that presently, it's a rarity that the Power Requirements aren't shown on the Device itself, with a Symbol depicting the Polarity of both the Inner, and Outer Conductors. Even Toys have that information shown on them.
I love these HUBs, but LinkSys/Cisco has really dropped the ball on this one. I'm guessing that a lot of people have discovered, that if this 4-Port USB HUB doesn't have External Power, they quickly decided not purchase another one, when they need to "Daisy Chain" them together, for their Network of USB Devices.
When you consider the loss of HUB Sales, coupled with a loss of income from a Power Supply they've never stocked, the numbers could be quite large. That's not even considering the Support time I'm guessing would have been necessary when Customers determined they had a problem, and needed answers. (It's not really a guess, since I talked to several Support People, without getting a satisfactory answer, before I finally came to this Forum, as a last resort.)
I was actually shocked to find that LinkSys/Cisco, didn't sell an AC/DC Power Supply for the HUB, because Power Supplies like that are so commonly required, with the Electronics sold, today. I'd be willing to wager that LinkSys/Cisco does, in fact, carry an AC/DC Power Supply that would be compatible with the "Compact USB 4-Port HUBs, Model Number USBHUB4C," they sell. When something like this happens, I wonder how many other Opportunities like this, have been missed by the people who work for this company.
We've all heard the expression about "Being too close to the Forest, to see the Trees." This may be a good example of it's meaning. At least I was able to find the answer to my Problem, thanks to the fact that the Query I made almost, 3 years ago, which had an answer, was still available to me, thanks to this Forum.
Very Interesting!
Bruce Feezel
Comedian62

I may get the extra Retention Modules & Screws needed for K8T Master2-FAR

see below response.

Quote
Originally posted by unixxx
I'll try directly e-mailing that address.
Forget MSI, They never replied to My email, Try Koolance They sell a pair of compatible Retention Modules for $12.99 a pair.

IPad mini with 30 pin HDMI adapter

Hi,
I have iPad mini and "lightning to 30 pin converter". I want to buy 30 pin HDMI Adapter (for iPad 2). I want to know that if I connect that 30 pin HDMI adapter to my iPad mini with the help of "lightning to 30 pin converter", will it work on my device?
Thanks in advance...

Cleaning the docking port didn't help. My other accessories still work.

Lightning (F) to 30 pin (M) adapter

I have an older i-pod, 30 pin. I just received a new docking station that has the lightning pin(?) for the i-phone 5. I need an adapter that goes from the lightning pin to the 30 pin (female lightning and male 30 pin.) Has anyone heard of this? Thank you

Have been trying to locate a lightning female to 30 pin male adapter for a friend with a mix of iOS devices and have had limited success.
MiniInTheBox.com has a corded-style adaptor which might work:
http://www.miniinthebox.com/lightning-female-connector-to-30-pin-male-connector- cable-15cm_p693543.html?currency=USD&litb_from=paid_adwords_shopping&gclid=CMin6 qXD4LsCFfBcMgodKBYADA#prod_description
I have no experience with this vendor so cannot offer any comment regarding them. As with all third-party Apple adaptors, this adaptor could support only power as no details as to operational support are shown.
Another adaptor by Sandberg has been discontinued by the manufacturer but might still be found somewhere.
http://www.sandberg.it/product/Adapter-30pin-M-to-Lightning-F
This was offered on Amazon UK but they are currently out of stock - which is likely permanent if the manufacturer had discontinued the adaptor.
http://www.amazon.co.uk/Sandberg-Adapter-30pin-Lightning-440-45/dp/B009KZZ3LC
When I called my local Apple Store, I received a very polite but suspiciously contrived answer that Apple is "focused on forward planning" so did not offer a reverse Lightning to 30-pin adaptor. It had the quality of an official talking point given to employees for use in such circumstances.
From the rumors on the Web about Apple disallowing new iOS docking offering both a Lightning and 30-pin adaptor, the lack of a reverse Lightning to 30-pin adaptor could be related?
So while one of the above devices COULD do the job (if you could obtain it!), you would be taking a chance that everything would work correctly!
Good luck!

How do I get a PIN for scan to email on photosmart 7525

I have a PIN for one email address for work. I need to add a PIN for a private email address so that I can scan to email. Where do I get the PIN?

Hello @maclindie!
Thank you for posting on the HP Forums!
On the Photosmart 7520 when you press scan and choose email you should have the option to "add". If you select "add" then the printer will ask you to enter an email address. At this point you will want to enter your private email address and confirm. You should then receive a pin in the inbox of the private email you entered.
When you want to scan from your private email you just select that account on the printer and enter the new pin. When you want to scan from your other email you select that one and enter its pin!
Thanks again for posting on the HP Forums and enjoy your night!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

GETS and PINS

hi,
Can someone please explain me the diffrence b.w the Gets and Pins in the V$librarycache.
Also we have 2 env, 9i and 10g..and when i query this
select * from v$librarycache in both of them, in 9i the gets and pins are both increasing for namespace "SQL AREA". But when i do this in 10g, only pins increase for the same namespace.
One more thing i noticed is that the increase in the values is not by 1..
Kindly help.
Regards,
Mayank

gets:(Parse) The number of lookups for objects of the namespace.
Pins:(execution) The number of reads or executions of the objects
of the namespace.
reloads:(Parse) The number of library cache misses on the execution
step,thereby causing an implicit reparsing of the sql statement.
Invalidation:(Parse) if the object is modified then all explain plans
that reference the objects are marked invalid and must be parsed again.
Guidelines: Reloads should be less than 1% of the pins.
select sum(pins) "executions",sum(reloads) "Cache Misses"
,sum(reloads)/sum(pins) from v$librarycache;
if reloads-to-pins ratio is greater then 1% increase the value
of shared_pool_size parameter.

Is there anyway to get an App Tab to stay when I close the program then reopen it?...they always disappear when I open a new window etc.

Is there anyway to get an App Tab to stay when I close the program then reopen it?...they always disappear when I open a new window etc.
And I thought the whole point of an App Tab was to always have those tabs there no matter what window is open all the time period.
It's a minor complaint but I would really appreciate the option to permanently have them there.

I thought that app tabs would be more persistent, like pinning programs to the taskbar in Windows, but this is not the case.
Instead, once you close a Firefox window, all its tabs and app tabs are lost.
Essentially, this means that the close button in the upper-left corner of a Firefox window is now a "kill all open tabs and loose all App Tabs without warning++ " button. That is not cool.
I realize that "Firefox > Quit Firefox" behaves as intended, but many people use the more obvious red close button instead of the menu to close windows on a Mac. And it is easy to forget that the red button is now also an app-tab-death button. I've lost my app tabs many times to this issue. It is an unforgiving user interface decision which hampers the usability of app tabs. Why should I go through the extra clicks of setting up app tabs if I can loose them so easily?
Ideally, App Tabs could be saved separately from the currently open windows (perhaps create an option to save then to a special Tab Group that opens on startup?). App tabs would be exceedingly useful to me if they weren't so easy to loose.
On that note, saving Tab Groups would also be a useful functionality.
++ You will get a "closing multiple tabs" warning if you have only one window open, and that one window has multiple non-app tabs open, and you have enabled the warning in Preferences. But this too unreliable to help prevent the loss of app tabs.

Apple 30-pin adapter for my iPhone 4 and iPod doesn't work

I purchased an Apple 30-pin adapter for my iPhone 4 and iPod touch to connect an HDMI cable to my HDTV. I am able to get audio but no picture. Any suggestions as to what the problem may be?

Review this
http://support.apple.com/kb/ht4108

Can we do with a 16 pin terminal base for fp-tc-120?

i got a thermocouple module for my project. The terminal base contains only 16 pins. Is there ne solution for this or shud we get a 32 pin terminal base ?

The 16 pin terminal base is the FP-TB-3. It is specifically designed for use with the FP-TC-120. The FP-TC-120 requires pins 1-16 for input channels 0-7. Pins 17-32 are not required. The FP-TC-120 will work with any of the FP-TB-X terminal bases.
Regards,
Aaron

HT4108 I bought 2 Apple Digital AV Adapters "HDMI" (30 pin Digital TV Adapter "for IPad 2" - Lightning Digital AV Adapter "for IPad mini") three days ago.

Apple Crew ,
I bought 2 Apple Digital AV Adapters “HDMI” (30 pin Digital TV Adapter "for IPad 2" - Lightning Digital AV Adapter "for IPad mini") three days ago.
I’ve used my iPad 2 to connect with Samsung Smart TV via 30 pin Digital AV Adapter “HDMI”,
The iPad 2 instantly connect to the television, but the problem is that the TV displayed screen (mirror) isn't full screen. I tried with every setting on my iPad and also on the television but still no luck and the screen still appear in small size.
I’ve used my iPad mini to connect with Samsung Smart TV via Lightning Digital AV Adapter “HDMI”,
but also the same problem
I tried connecting with other televisions but the same result
It only works with iPhone with Full Screen!!!!!
I need to solve this issue as I paid almost 95 $ and for the first time I didn’t get the service I need from apple!! (Which I didn’t expect)
Regards,
Mohamed Mostafa
Maersk Oil
Engineering Section Head
Mobile: +2 01221110014

No: http://support.apple.com/kb/ht4108
See note 3:
Apple AV adapters cannot provide video output when used with Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m) adapter.

TS3581 Crackling static noise in audio with 30 pin lightning adapter when battery is full

Anyone else get a really bad crackling static noise through the audio when using the 30 pin lightning adapter and the battery is almost full? I am using an iPhone 5, BMW iDrive with the Y audio and USB connection. I did not have this problem with the 4S and the normal 30 pin connector. The lilghtning 30 pin adapter seems to create interference when the phone's battery is nearly full. I also see the warning message indicating that charging is not supported - and according to the troubleshooting guide this is normal - but what about the noise????

Alright, another update: I tried another iPhone 5, which did not charge, and an iPod touch (without the lightning adapter, obviously), which also did not charge. Additionally, I tried the lightning to 30-pin adapter with an old sync cable and my computer, and it worked fine. At this point, it appears that the problem may be in the MDI cable coming from the car, rather than the adapter. Perhaps it was just coincidental that it stopped working at the same time I upgraded.

I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
for the installation file(s):
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

Anyway to get 4-pin - 8-pin SSI adapter (for K8N-Master2)

Similar Messages

Maybe you are looking for