AP1602E - basic configuration guide ..

Hi
I bought a new  1602E ap  .. so it comes with no documentation and the only doc that i foudn in the net  it was this:
http://www.sws.cz/prod_img/cisco/ap1600getstart.pdf
but  I need the  started guide to the basic configuration ..
My concern is  because   the AP will be used for a  producction enviroment and    the  point will  be
what will be the  best  radio configuration  with  open with non security  .. ? 2.4 or 5ghz ..
is any one know about it  I appretitate your support
thnks  in advanced
regards

Hi,
do you have AIR-CAP or AIR-SAP
as AIR-CAP is controller based AP where you need the WLC to get the AP configured. Simply you have to connect the AP with POE.
AIR-SAP is standalone and below is the doc to configure it:-
http://www.cisco.com/en/US/docs/wireless/access_point/15_2_4_JA/configuration/guide/scg15.2.4_book.html
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080c0b93c.shtml
2.4 GHZ or 5GHZ depends on what type of clients you want to connect ? If you have clients with A radio/ N radio then you need 5 GHZ and if your client is having G radio/N radio you can go for 2.4 GHZ.

Similar Messages

  • Basic configuration guide to set ECC to PI

    Hi Experts,
    I would to set a scenario for BAPI to File.
    Please let me know the basic configuration to be set for ECC and PI.
    Explain in detail as I am totally new to this.
    Thanks
    Sunil

    Hi Sunil,
       the 'TP column' can be seen by using
    TCODE
      SMGW
    on the gatway system that you are registering the <Program ID>.
    Menu option
      GoTo
        -> Logged on Clients
    The 'TP Name' column is the 3rd column.
    Can you advise :
    (1)
    if the RFC destination (created on the ECC) system is working by using the 'Test Connection' option in the SM59 RFC destination?
    (2)
    Is the respective RFC Sender Adapter Communication Channel activated?
    (3) how you are call in the RFC, e.g. ABAP report or SE37?
    Regards
      Kenny

  • What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide

    I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
    So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
    Clients and suggests it should be used for Jabber for Mac.
    What is BDI or BDS spelled out? Something directory integration, but what is the B ?
    Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
    How can Jabber get any more confusing…
    I also noted in the  Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…

    Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
    To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
    I also noted in the  Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
    Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Basic configuration in GRC 10 for portals

    Hi Gurus,
    Could you please tell me the basic configuration details in GRC 10 for portals.
    Thanks,
    Mukesh

    Hi Mukesh,
    You can refer to https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
    However there is no such guide on Portal integration with GRC, you might need to follow below steps:
    1- Create one HTTP type RFC connection between GRC and Portal system.
    2- Create System Alias in portal system for GRC system
    3- Deploy the GRC Portal content in Portal system
    5-Portal content comes with 5 work-sets and one security role.You can assign the portal role that comes with the Portal content to user in Portal and also GRC roles to the same user in GRC system.
    Hope this helps.
    Regards,
    Ameet

  • Loyalty Management  Best Practise Configuration Guide

    Dear all,
    we set up Loyalty Management in our Demo-System (CRM 7.0 Level5) as it is described in the SAP CRM Marketing book.
    Unfortunately we still have problems with:
    - sales order integration
    - execution of membership activities
    Does anybody has a Best Pracise Configuration Guide for Loyalty Management, I can use as an additional guide beneath the SAP Marketing book to solve these issues and to check all system settings and the customizing?

    Language                                                  German
    English (Master)                              
    Compare versions               SSCR         Download        
    In case, the page does not refresh automatically within 10 seconds
    after finishing with correction activity,
    please use the REFRESH button!  
    Refresh
    Content:                                   Summary                  |                   Header Data                  |                   Validity                  |                   Attachments                
    I know this is a late post but will help other users who search.
    Note - 1331970.
    Symptom
    Loyalty functionality in sales order
    Solution
    Please read the documentation below Setup for Integration of Sales Order with Loyalty for CRM 7.0 You can use this note to integrate the loyalty application with sales order to allow customers to earn reward points on purchase of products, redeem points and buy point products. To enable the above-mentioned functionality, the following set up has to be carried out in the system: -> Product master data You have to add SetType REWARD_PRO_LOY (created for product type Material) to the product category. You may create a new product category for loyalty products. You can add the settype to a product category using the following steps: 1. Use transaction COMM_HIERARCHY
    2. Search for the category to be used for loyalty products
    3. In the SetTypes tab under Category Data, add REWARD_PRO_LOY as the settype After the settype is added to the loyalty product category, it will appear as point information assignment block in the product overview page. Here, you can maintain point information for Accrual, Redemption and Buy Points scenarios. You have to select the Scenario, Point Type (Points, Miles etc) and enter the associated number of points. The following three activities are supported: -> Accrual
    In this scenario, a customer buys standard products and earns reward points for his purchase. The actual points to be accrued will be maintained at product master data level.  You have to select EARN as the loyalty scenario. Example: We have a product, Laptop T 61, which has 1000 reward points associated with it, at the product master level. If a customer buys this product a member activity will be created and 1000 points will be credited to his account. Note: You can maintain points for a product with a particular loyalty scenario in the point information assignment block of product overview page. -> Redemption
    In this scenario, a customer redeems his points to buy products. In CRM 7.0, redemption products have 100% discount and can be bought only by points. The point value of such products will be maintained at product master data level in point information assignment block. You have to select REDEEM as the loyalty scenario. Example: We have a keyboard HT-1010, which has a price of 5000 points (and 100% discount). If a customer buys this product, a member activity will be created and 5000 points will be deducted from the customer's account. -> Buy Points
    This functionality enables a customer to purchase points. The point value of such products will be maintained at product master data level under the point Information assignment block. You have to select BUYPOINTS as the loyalty scenario. Note:
    Point information is maintained for 1 base unit of product .If the quantity and unit of measure are changed, the points will be calculated accordingly. 
    -> Customizing in SPRO You have maintained the following customizing settings in SPRO: 
    -> In the customizing activity Define Point Types for Sales-Order Integration, you maintain point types. For more information, see SAP Customizing Implementation guide   Customer Relationship Management  Marketing  Loyalty Management - Design  Channel Integration  Define Point Types for Sales-Order Integration Point Information in product master can be maintained only for these point types. 
    -> In the customizing activity Define Categories and Types for Sales Order Integration, you maintain member activity category, activity type, sales order status for which activity will be created and the processing delay ( Process On Hold) for a particular loyalty scenario. For more information, see SAP Customizing Implementation guide  Customer Relationship Management  Marketing  Loyalty Management - Execution  Member Activities  Define Categories and Types for Sales Order Integration 
    -> In the customizing activity Define Transaction Types, you maintain the transaction types for accrual, redemption and buy points. For more information, see SAP Customizing Implementation guide  Customer Relationship Management  Transactions  Basic Settings  Define Transaction Types Note:
    Reference transaction types LTAA, LTAR and LTAB are delivered for CRM IC and UIU. For web channel, transaction types ISLA, ISLR and ISLB are delivered. You can create new transaction types on project basis but transaction classification should be maintained as A, R and B for accrual, redemption and buy points transactions respectively. For redemption transaction LTAR, the item category is LTAR where the pricing process is maintained as 100% discount. Therefore, the net value will always be 0 for redemption items and only points will be charged. You have to maintain the condition 0R10 in pricing procedure. The pricing procedure 0CRM01 contains the details of condition 0R10. If you do not maintain 100% discount, then additional currency price will be displayed. For example, $200 + 100 MILES. Billing and delivery related customizing has to be done on a project basis. ----------------------------------------------------------------------------------------------------------------------------------------------
    ----------------------------------------------------------------------- Setup for Integration of Sales Order with Loyalty in EhPx for CRM 7.0 You can use this note to integrate the loyalty application with sales order to allow customers to earn reward points on purchase of products, redeem points and buy point products. To enable the above-mentioned functionality, the following set up has to be carried out in the system: -> Product master data You have to add SetType REWARD_PRO_LOY (created for product type Material) to the product category. You may create a new product category for loyalty products. You can add the SetType to a product category using the following steps: 1. Use transaction COMM_HIERARCHY
    2. Search for the category to be used for loyalty products
    3. In the SetTypes tab under Category Data, add REWARD_PRO_LOY as the SetType After the SetType is added to the loyalty product category, it will appear as point information assignment block in the product overview page. Here, you can maintain point information for Accrual, Redemption and Buy Points scenarios. You have to select the Scenario, Point Type (Points, Miles etc) and enter the associated number of points. The following three activities are supported: -> Accrual
    In this scenario, a customer buys standard products and earns reward points for his purchase. The actual points to be accrued will be maintained at product master data level.  You have to select EARN as the loyalty scenario. Example: We have a product, Laptop T 61, which has 1000 reward points associated with it, at the product master level. If a customer buys this product a member activity will be created and 1000 points will be credited to his account. Note: You can maintain points for a product with a particular loyalty scenario in the point information assignment block of product overview page. This is an optional activity. In many cases, the points accrued will not be maintained in the product master data but will be determined based on reward rules. In such cases, you do not have to maintain the SetType. -> Buy Points
    This functionality enables a customer to purchase points. The point value of such products will be maintained at product master data level under the point Information assignment block. You have to select BUYPOINTS as the loyalty scenario. This activity is mandatory for Buy Points scenario. -> Redemption
    In this scenario, a customer redeems his points to buy products. In CRM 7.0, redemption products have 100% discount and can be bought only by points. The point value of such products will be maintained at product master data level in point information assignment block. You have to select REDEEM as the loyalty scenario. Example: We have a keyboard HT-1010, which has a price of 5000 points (and 100% discount). If a customer buys this product, a member activity will be created and 5000 points will be deducted from the customer's account. Note:
    Point information is maintained for 1 base unit of product .If the quantity and unit of measure are changed, the points will be calculated accordingly. Redemption functionality in Ehp1 for CRM 7.0 In case of redemption, you have three payment options to choose from. You choose the payment option in the customizing activity Define Mixed Payment for Sales Order Integration. For more information, see SAP Customizing Implementation guide   Customer Relationship Management  Marketing   Loyalty Management  Channel Integration  Define Mixed Payment for Sales Order Integration a) Fixed redemption value from Product Master
    The point information will be picked from the SetType as explained above and 100% discount will be given at item category level. Attached is the screenshot of the same. Using Pricing Process, you can select whether normal pricing is executed or 100% discount is given. In addition to the above-mentioned setting, a 100% discount condition should be included in the pricing procedure. For this purpose, you can use the standard condition 0R10 in the pricing procedure. b) Mixed redemption using Conditions and IPC With Ehp1 for CRM 7.0, mixed payment functionality is available. This enables a consumer to pay with points and money in a single sales transaction. You can maintain point prices as conditions in product master data under the Prices assignment block. The condition type
    0LM1 with condition tables SAP002, 003 and 004 are used to maintain these point conditions as seen in the screenshot below. Select the option '0LM1_LM_SAP002' from the dropdown. Select 0LM1_LM_SAP002 from the dropdown. In the above screenshot, Price in Points = 100% point price , Max Price in Points = maximum points a consumer can spend, Min Price in Points = minimum points a consumer should spend for this product. Note:
    In the above scenario, entries in Point Information assignment block will not be considered for redemption but the information will be picked from the conditions. A new usage LM is developed for points as conditions. You can use the customizing activity Condition Technique: Basics to develop condition tables, access sequences, condition types and point procedures.
    For more information, see SAP Customizing Implementation guide   Customer Relationship Management  Master Data  Conditions and Condition Technique  Condition Technique: Basics You can create condition objects with application CRM and usage LM. The point procedure 0LM001 is delivered and can be used in a sales transaction using the below the customizing Determine Point Procedures. Point information will be fetched by executing this procedure. For more information, see SAP Customizing Implementation guide   Customer Relationship Management  Marketing  Loyalty Management  Channel Integration  Determine Point Procedures You can assign this point procedure to a particular sales org, distribution channel, division, customer pricing procedure and document pricing procedure the same way it is done with pricing procedure. If you decide to use only points in a sales transaction (consumer has to pay 100% point price always), a standard pricing procedure with 100% discount would suffice. If you want to allow mixed pricing, for example, a consumer can pay anything between 1000 to 2000 points and rest in currency, then condition type 2902 (point based discount) should be included in the pricing procedure and 100% discount should not be chosen at item category level as explained above. The conversion rate between points and currency can be maintained in CRM UI in the following manner:
    1. Go to Loyalty Management
    2. Select Prices
    3. Choose 2900 as the Price Maintenance Group
    Attached is the screenshot of the same. Here 1 USD is maintained as 1 point. Product specific conversion rates are also allowed. Condition type 2901 is the reference condition type for 2902 and 2903 (used in flexible order and is described later in the section flexible order). Scales can be maintained for the conversion rates. For example, for the first 1000 Points it is 0.5 USD per point. From 1000 to 2000 points, it is 0.75 USD per point and from 2000 points onwards, it is 1 USD per 1 Point Example of Sales order Here, a product TV-1000 is maintained with Point price as 1000 Miles and Min Point price  as 500 miles and Max point as 1000 Miles. A consumer purchases this product using a redemption transaction and spends 500 points. With a conversion rate of 1 USD equal 1 point, the net value becomes 500 USD + 500 Miles. If consumer spends 1000 Miles, the net value will be 0 USD + 1000 miles. Similarly, various combinations of maximum price and minimum price can be maintained in Product master and accordingly consumer can use his points to redeem products. c) Mixed payment using Flexible order If you do not wish to maintain point prices for individual products due to high volume of products, specifically in retail, then they you select this option where during the checkout, consumer will be given the option to use his points. Discount will be given based on the points spent at an item level. In this case, the only thing you have to maintain is a fixed conversion rate (condition type 2901). The transaction type will be the same as accrual. For example, a consumer purchases a product HT-1000 on which he can earn 1000 special points. During checkout, he will be asked to use his points. Use Point Payment will be enabled, and he can enter points he wants to redeem. If he decides to use 500 points, then a discount will be given to him based on the points spent. Here, with a conversion rate of 1 USD equal to 1 point, 500 USD discount will be given and accrual information will be lost. Hence, the points spent will be equal to 500. Discount Based on Member Basic and Lifetime Tiers In accrual transactions, discounts can be given to members who have reached a particular tier (Basic and Lifetime tiers). This can be maintained as a condition using the following steps:
    1. In CRM UI, go to Loyalty Management
    2. Select Prices
    3. Choose 29MD as the Price Maintenance Group
    Here, we can maintain the percentage discount on a product for a particular basic and lifetime tier. The condition type 29MD should be included in the pricing procedure of sales transaction to provide discounts. In sales order processing, you can check the discount under the assignment block Price Totals on the overview page. In this case, a 2% discount is given based on the above condition as shown in the third row) Generation of Billing Documents Once a sales order is created and saved, you can generate a billing document as a follow up activity. For loyalty sales transactions, the following three new fields are added to the billing document.
    -> Points
    -> Point type
    -> Points spent In Accrual and Buy Points scenarios, Points = Points accrued; Point type = Miles, points etc; Points spent = 0 In redemption scenarios, Points = Total point price; Point type = Miles, Points etc; Points spent = points spent by the consumer To generate billing document from a sales order, you have to select a relevant billing option for the item category. In this case, we have selected Transaction-Related Billing According to Order Quantity. The billing will happen via CRM Billing.
    Note: Only CRM Billing is currently supported
    As billing will happen only if the order is replicated successfully to ERP (where shipping, delivery and logistics will be done), you have to ensure that all the master data, for example, products, BP (sold to party), conditions, etc are present in ERP along with the transaction type and item category (for example, LTAA and LTAN). Once replication is complete, we can create a billing document from the sales order overview page. Select Create Follow-up and choose Billing. -> Customizing in SPRO You have maintained the following customizing settings in SPRO: 
    -> In the customizing activity Define Point Types for Sales-Order Integration, you maintain point types. For more information, see SAP Customizing Implementation guide   Customer Relationship Management  Marketing   Loyalty Management  Channel Integration   Define Point Types for Sales-Order Integration Point Information in product master can be maintained only for these point types. 
    -> In the customizing activity Define Categories and Types for Sales Order Integration, you maintain member activity category, activity type, sales order status for which activity will be created and the processing delay (Process On Hold) for a particular loyalty scenario. For more information, see SAP Customizing Implementation guide  Customer Relationship Management  Marketing  Loyalty Management  Member Activities  Define Categories and Types for Sales Order Integration 
    -> In the customizing activity Define Transaction Types, you maintain the transaction types for accrual, redemption and buy points. For more information, see SAP Customizing Implementation guide  Customer Relationship Management  Transactions  Basic Settings  Define Transaction Types 
    Note:
    Reference transaction types LTAA, LTAR and LTAB are delivered for CRM IC and UIU. For web channel, transaction types ISLA, ISLR and ISLB are delivered. You can create new transaction types on project basis but transaction classification should be maintained as A, R and B for accrual, redemption and buy points transactions respectively. For redemption transaction LTAR, the item category is LTAR where the pricing process is maintained as 100% discount. Therefore, the net value will always be 0 for redemption items and only points will be charged. You have to maintain the condition 0R10 in pricing procedure. The pricing procedure 0CRM01 contains the details of condition 0R10. If you do not maintain 100% discount, then additional currency price will be displayed. For example, $200 + 100 MILES. Billing and delivery related customizing has to be done on a project basis. -> In the customizing activity Assign Product Hierarchy for Sales Order Integration, you register the product hierarchy if it is not the same as sales operation hierarchy. For more information, see SAP Customizing Implementation guide  Customer Relationship Management  Marketing  Loyalty Management  Channel Integration  Assign Product Hierarchy for Sales Order Integration This customizing will help you create reward rules based on product categories and process them during creation of member activity using sales order. -> In the customizing activity Determine Pricing Procedure, you maintain 29CRLM as the pricing procedure for loyalty transactions. For more information, see SAP Customizing Implementation guide  Customer Relationship Management  Marketing  Business Functions  Pricing  Pricing in the Business Transaction  Determine Pricing Procedure For more information please refer to the attachment and IMG Documentation.

  • Several errors during system preparation / basic configuration

    Hello,
    during the basic configuration I get stuck in the process step configure automatically -> setup bw.
    In the slg1 I can see several errors where I don't know if they are related to my bw problem or other probleme. Maybe someone can give me a hint how to solve the issue.
    @5C\QError@     2011/11/10 16:58:07 : DIAGTPL/CONFIG/HANDLER=CL_DIAGLS_ABAP_INST_TECH_SY Item does not exist
    @5C\QError@     Product system DUM has no active standalone product version     @35\QLong text exists@
    @5C\QError@     No detected product instances available for technical system C21     @35\QLong text exists@
    in the Solman_setup I have the problem that
    ESR: Extractor setup is not sucessful!
    Cube 0SM_BPMRH is not active and will now be activated automatically
    System status failed for system
    Could someone please help me to solve some of the problems?
    Thanks a lot, Vanessa

    Hello Vanessa,
    I wouldn't recommend looking at SLG1 at all times and try to find solutions for it, since Solution Manager deals with a huge landscape and in most cases some warning is thrown in the logs for any reason.
    For example, the "CL_DIAGLS_ABAP_INST_TECH_SY Item does not exist" and "no active standalone product version @35\QLong text exists@" can be due to systems coming from SLD to the LMDB with no correct definition. If SLD is not passing this information, it is 99% because the system is not well defined there. Hence it is just a warning.
    Now if you see something in SLG1 and indeed you have issues in this diagnostics system, it must be investigated.
    For your BI problem:
    Please execute the steps as described in section "3.2.1 Activation of
    Info Cube from BI Content" in the Setup BPA Guide.
    1430754 Business Process Analytics: Setup guide
    (https://websmp101.sap-ag.de/~sapdownload/011000358700001210492010E/Setu
    p_Guide_BP_Analytics.pdf)
    Furthermore, I strongly recommend that, for Solution Manager 7.1, you make sure you have the latest SP in ABAP and JAVA. Now we are at ST400 SP03  and LM-SERVICE SP03 patch level 1.
    You must not forward to the next steps if you have a step yellow, red or with Update checked.
    Best regards,
    Guilherme

  • No ''BS: SRM-Portal(Basic Configuration) V1'' in /NWA Deply and Change

    Hi Expert
    i want to integrate SRM7.0 with Portal,
    Enviroment :
                   SRM7.0 AS ABAP
                   ERP 6.0SR3 AS ABAP/AS JAVA
                   BP for SRM7.0 has installed
                   SRM has been added into Trused System in Portal
    and i follow InstGuide > "Guide for Automated Configuration: Connecting Portal Systems u201D
    When i logon Portal with <hostname>:<port>/NWA
                    and click    > Deploy and Change
    there is no "BS: SRM-Portal(Basic Configuration) V1u201D  exist
    i dont know Why,  whether because my NW7.0 patch 14 need to upgrade? Or other reason

    Hi,
    You can also configure portal connection manually. Please check the Configuration Guide in SAP Solution Manager or offline downloaded configuration guide in http://service.sap.com/srm-inst  SAP SRM Server 7.0 -> Configuration Guide for SAP SRM 7.0 -> Business Package for SAP SRM 7.0.
    You can also access SRM via NWBC html in current SRM 7.0 SP06 without Portal. It is called Portal-Independent Navigation Frame.
    Regards,
    Masa

  • Where can i find the configuration guide for a solution manager beginner

    dear all:
           as the title,expect your reply.
    thanks!

    Hi Zuiyong,
    the configuration guide of SAP Solution Manager contains only same general information like strategy, required SPs in sat. systems, authorization and notes.
    The 'REAL' configuration guide can will find in the system in the transaction SPRO->Referenz.IMG ->Solution Manager->Solution Manager-> Basic Settings. These settings you have to make to use standard SAP Solution Manager. In the are enhanced settings you can find additional settings for additional features.
    Regards,
    Udo Lang

  • Organizational Management configuration Guide.

    Hi All,
    Can any body please  give me the configuration Stpes for Organization Management.
    The tables included in the configuration.
    I have gone through this site
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/dfba3692dc635ce10000009b38f839/frameset.htm
    But i need whole configuration guide for OM.
    Please help me.
    Thanks,

    Hi,
    In OM you have to configure the following
    IMGPersonnel management Organizational management  Basic settings  Maintain number ranges  set up number assignment for all plan versions
    Maintain object type:
    IMGPersonnel management  Organizational management  Basic settings  Data model enhancement  maintain object type
    Maintain infotypes
    IMGPersonnel management Organizational management  Basic settings  Data model enhancementu2014infotype maintenance  maintain infotypes
    Relationaship maintenance:
    IMGPersonnel management Organisational management  Basic settings  Data model enhancement  Relationship maintenance  maintain relationships
    Maintain evaluation paths:
    IMGPersonnel management Organisational management  Basic settings Maintain evaluation paths
    Maintain personnel actions:
    IMGPersonnel management Organisational management  Basic settings Maintain personnel actions
    Activate inheritance of account assignment features
    IMGPersonnel management Organisational management  Basic settings Activate  inheritance of account assignment features
    Setup integration with Personnel Administration
    IMGPersonnel management Organisational management  Basic settings Integration  Setup integration with PA
    Transfer data from Pa
    IMGPersonnel management Organisational management  Basic settings integration  transfer data from PA
    Perepare integration with Pa
    MGPersonnel management Organisational management  Basic settings integration Prepare integration with PA
    Transfer data to PA
    IMGPersonnel management Organisational management  Basic settings integration Transfer  data to PA
    Check integration consistency
    IMGPersonnel management Organisational management  Basic settings integration Check integration consistency
    regards,
    kalyani

  • WAR file and Configuration guide  for CRM xMSAHH required

    Hello experts,
    Please provide us with the Congfiguration guide for CRM xMSAHH(Mobile Sales for Handhelds) 4.0 and CRM xMSAHH(Mobile Sales for Handhelds) 5.0.
    We referred to SAP Note 788036,but the link mentioned is not valid.
    http:
    service.sap.com\instguides -> SAP Components -> SAP Solutions for
    Mobile Business -> Mobile Sales for HH (with CRM) ->
    MSA for HH 4.0 (with CRM)
    Also we need a WAR file(CRM MSAHH) to run the application on Mobile Client MI2.5.
    Could anyone provide us with the link or the file for the same and also the CRM backend configuration guide?
    Thanks,
    Himanshu Limaye

    Hi Himanshu Limaye,
         Kindly request you to have a look into the NOTE : 871779 , which basically gives all the details needed.
    If still any clarification need, please revert the message back , will be ready to help
    Regards,
    Anand.

  • Troubleshooting and Configuration Guide

    HI, Can someone help me with the Troubleshooting and configuration guide for L3 VPN i.e--MPLS and L2 VPN i.e--ATM, FR
    Regards
    Raghav

    Hi Raghav
    Maybe you can tell us what exactly within MPLS VPNs you are trying to troubleshoot, if its basic troubleshooting, maybe this will help
    http://www.cisco.com/warp/public/105/mpls_vpn_tsh.html
    HTH
    Maamun

  • Basic configuration for Wireless AP

    I have been task to configure and deploy 3 access point in three site within our organzation. I need a little help with this task in order to have it complete by Friday.  The model we are using is a Air-Sap1602i-A-K9.  Thank you for your time.

    Please refer to the following links:
    https://supportforums.cisco.com/document/61936/autonomous-ap-and-bridge-basic-configuration-template
    http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/15_2_4_JB/configuration/guide/scg15_2_4_JB3a.pdf?mdfid=284366503

  • SAP ECC 6 MM/SD Configuration guide

    Dear Guru's
    Am new to dis sector. Trying to practise through IDES version. Can anybody give the website link for downloading ECC MM and SD configuration guides for practise.
    Thanks in advance

    Am new to "dis" sector
    Welcome to this forum. 
    First dont use abbreviated words in this forum which is prohibited.  Second go through the forum rules as indicated in this link
    [Read this before posting  |Read this before posting;
    As indicated therein, please search the forum before posting such basic / repeated questions and deviate the forum rules.
    thanks
    G. Lakshmipathi

  • LMS configuration guide

    Hi Experts,
    I need help on Cisco Prime LMS 4.1, I have installed it on the server and added some devices through add/import inventory but did not get any logs from devices.
    I also configure snmp-server read and write community commands with snmp host commands,
    Can i get any configuration guide or any link for related documents.
    Expecting reply
    Thanks
    Fazal

    After the addition Ciscoworks should automatically start managing the devices. The first thing it would do is to collect Inventory details to get it managed.
    When you simply add a device using IP and login/snmp credentials via add/import, the device should appear unknown and once the basic inventory is done, ciscoworks should show device family icon (switch/router/FW/Voice etx), which should reflect LMS has started managing you device(s).
    It seems "logs" is not clear on what is exactly you dont get.
    Make sure the Credentials are correct which you can check via Credentials verification job, from:
    Inventory > Job Browsers: Device Credential Verification
    As Ciscoworks LMS is combinations of various modules segregated feature-wise like configuration, Fault Management, IP SLA etc. For more details please check the following End-User Guide Section :
    http://www.cisco.com/en/US/products/ps11200/products_user_guide_list.html
    -Thanks
    Vinod

  • Create configuration guide with IMG object values

    Hello all!
    Is it possible to generate configuration guide not only with the IMG objects but also with IMG object values?
    For instance, if we filled in plant 1000 in customizing, then could this value also be present on the generated configuration guide?
    Regards
    Martin

    Sorry, seems I was unclear with the question.
    I meant the generated word document that can be generated with SOLAR02->Configuration->Generate configuration document.
    Here I can download the objects specified in the configuration tab to a word document with the help of a visual basic macro but the content of the IMG objects does not get downloaded.
    When I look at the macro in the generated word document, this functionality seems to be somewhat supported but I cannot make the system generate the appropriate excel files..

Maybe you are looking for