AP541N Management Software?

Hi is there any management software available to manage 5 or so AP541N running across a WAN. Eg we have a couple of VAP's setup on each access point 1 for staff and 1 for guests. I would like to be able to change all the WPA Personal guest access password centrally rather than having to log onto each box and edit it manually.
Thanks
Colin

Hi Colin, there is not any supported software from Cisco for these units. I know CCA can detect the AP for the topology but I don't think you can actually manage them from there.
If these AP's are installed at one location, you could cluster them and with any change made to one AP all the AP's will reflect the changes automatically.
-Tom
Please rate helpful posts

Similar Messages

Lion Battery Management Software seems to be erratic.

The Lion OS X 10.7.2 battery management software appears to be very erratic.
I just brought a new MacBook Pro direct from Apple last week (late 2011, 15", 2.4 GHz, 8 GB 1333 Mhz DDR3, 7500 rpm disc) with Lion OS X 10.7.2 preinstalled, i.e., the latest and greatest. I was only getting 3 hours on a battery charge until it ran out. After searching the forums nothing quite matched (older models, different graphic cards, more constrained systems, Lion software upgrades, etc).
I have the screen brightness set to about 50%, the power option "put disks to sleep whenever possible", and the keyboard set to turn off the light after 30 seconds of non-use. On battery, I have "display sleep" at 6 minutes and "computer sleep" set to 10 minutes. So I am not pushing the power consumption very hard.
I ran a "repair" from the recovery partition and my hard disk had no problems.
So I tried the Reset Power Manager metioned in another thread:
Shutdown
Depress Ctrl+Option+Shift
Power on
Hold for at least 10 seconds
Power on
and that extended my battery charge to 6 hours, not quite the 7 hours advertised. (I even tried it on my mid 2009 Mac Book Pro 13", Snow Leopard OS X 10.6.8 and its battery life was extended by about .67%).
But I started seeing odd reporting in the "time remaining" in the battery icon. The "time remaining" would fluctuate by as much as 20% in a just a few seconds, going either up or down! For example, it would jump from 4 hours to 3 hours, then up to 3.5 hours then up to 4.5 hours, down to 1.3 hours, and back up to 4.0, and so forth whenever I changed the state.
So I watched the "battery charge remaining" over several hours with different states: (WIFI on/off, start/stop applications, turn Thunderbird/Firefox to offline and back to online; Thunderbird is not an issue because I have it set to check for incoming messages every 2 hours not every few minutes) and I monitored using the Activity Monitor and the widget iStat Pro. The cpu was reported to never exceed 2% busy, user+system, and free memory never fell below 5.9 GB with minimwl swapping and paging, i.e. the machine was basically idle even when I had WIFI on with Firefox watching Adobe Flash video from the net, which is purportedly a CPU hog (it is not).
Has anyone else seen this erratic battery software managemt behavior? Does any have an explanation?

I noticed in some archived threads that someone suggested changing "time" to "percentage" because "time" remaining is calculated every few seconds and is very sensitive to changes of state as I noted in my post. I don't see that "solution" as much use because it doesn't tell me "percentage" of what? The amount of charge left? What I really what to know is "how long will my charge last?". 70% of 3 hours is something quite different than 70% of 7 hours. It seems to me that the time remaining ought to be calculated less often. The value is reported in hh:mm. I don't see much point in calculating it every few seconds. Once a minute would actually be more accurate.

App-V 5.0 SP2 Standard & Middleware Package Publish by RES Management Software?

Hi @all,
actually i am sitting by a customer packaging App-V 5.0 SP2 PAckages with Sequencer.
I have made Standard and Middleware-Packages.
Did somebody can say me how to publish App-V Packages (Standard & Middleware) by RES Management Software?
F.e. an App-V Package looks like this
AdobeAcrobatStandard80_DE.appv
AdobeAcrobatStandard80_DE.msi
AdobeAcrobatStandard80_DE_DeploymentConfig.xml
AdobeAcrobatStandard80_DE_UserConfig.xml
report.xml
How can i define Connection Groups, that i can make connections between Standard and Middleware Applications?
Greetz Berni

If you don't use the App-V Management server nor ConfigManager to deploy App-V packages, you have to create a ConnectionGroup definition XML file manually and then add the individual applications as well as the connection group definition to a client machine.
To create the ConenctionGroup XML file, you can use Notepad, Tim Mangan's
Appv_DefConnGroups or powershell (for instance as described by Aaron Parker on
Stealthpuppy)
adding the App-V packages and the connection group(s) to a client can be done with powershell (but their might be some special features for that in RES already)
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

Need security management software for OS 8.6 through 9.2

Are there any security management softwares available these days for OS 8.6 through OS 9.2? Something which lets the computer owner turn off firewire and USB is what I'm looking for. It would be nice to be able to allow only some selected USB devices, like a keyboard and a printer or scanner, and still disallow external drives or thumb flash drives, but turning off all USB would be useful on machines which don't need USB keyboards, like beige or B&W PMG3 computers or G3 iBooks.

Are there any security management softwares available these days for OS 8.6 through OS 9.2? Something which lets the computer owner turn off firewire and USB is what I'm looking for. It would be nice to be able to allow only some selected USB devices, like a keyboard and a printer or scanner, and still disallow external drives or thumb flash drives, but turning off all USB would be useful on machines which don't need USB keyboards, like beige or B&W PMG3 computers or G3 iBooks.

Best project management software for mac

Does anyone have any recommendations for the best project management software or strategic planning software for imac??
Thanks

If you are willing to spend money on professional tool with free support, if the team get's large, I would ask you to look at ConceptDraw Project. If you are dead set on open source and "free" software I would say that Redmine, Bugzilla or any other that has been around a while, and looking for plugins to make it suit your needs is one of your best bets.

Free Project Management Software for Mac or windows!

Hi all,
Does anyone know of a good project management software that does more than what Microsoft project does and is freely available? I mean one that has a local application but also can update updates to the web side of the software? I saw sharedPlan which is really good so far but its not freely available. It runs on Mac and Windows but really looking for a windows version as all my team members only use windows.
So I guess am asking for one that's open source?
Please let me know.

You might want to check out Wikipedia page and look for open source http://en.wikipedia.org/wiki/Comparisonof_project_managementsoftware
The only free tools that I know of are web based such as Zoho projects, Basecamp etc..
Or you can always download and use for 30 days tools from:
http://www.geniusinside.com
http://openproj.org/
http://www.ganttproject.biz/
or other

Project Management Software Options

Does anyone know of good project management software? I recently joined an advertising firm and am responsible for scheduling projects and keeping track of client info. What I need is a program or programs that will allow me to track projects, schedule due dates, etc. and enter client info and keep track of client daily interactions (phone calls, faxes, meetings).
If you're using something you like please let me know. Any suggestions are appreciated.

No, I coudn't find an appropriate forum. I wanted to post it on a general software discussion but couldn't find one. Sorry, I'll try elsewhere.

Project/Task Management Software for iMac, iPad and iPhone

Hi,
I work at a Espresso Bars company in Sydney and we have a small but busy Design & Marketing department. We're looking for the best, yet simplest software so we can manage all the marketing and design projects.
I've seen a few good Online Management Software but they are quite expensive ($25+ per month per user). The good thing about those systems is that you can access it from anywhere and people can collaborate, ask questions about a project, give feedback about a design, enter a new task or tick as completed, etc... And you can use it on an iMac, an iPad and an iPhone.
I came across Projector for iMac and iPad, but it is not online, if you want to share the project from iMac to iPad you have to conect your iPad to your computer and sync it. It also works by projects, so there is no way for you to see in a single screen all the projects you're currently working on and the process of them. So, although it being very user friendly and excellent UI, not sure if it is what we want.
I wanted to ask you if you know about another Project/Task Management Software that we can use on an iMac, iPad and perhaps and iPhone as well. Something that you either buy the app once or if you have to pay a monthly fee it needs to be very low. If it is online it would be much better! but everything would work I reckon.
User friendly and good UI software are preferred.
Thank you so much for your help!
Cheers
German D Salamanca

Open > http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/printers You need Wi-Fi to use it with the iPhone and iPad > http://support.apple.com/kb/HT4356

New BlackBerry Desktop Manager software for Mac

Let me know if there is a better "BlackBerry" forum to ask these questions -- but just wondering if this software will backup Address Book on my Mac to my BlackBerry without erasing everything I've already entered into the Blackberry by hand the past 2 years...
...also we have the Enterprise (corporate account) BlackBerry license (BB 8820) - if I use the newly released BlackBerry Desktop Manager software will that make a real mess of things or is it compatible.
Thanks for any comments or references to other forums or such. I come here because everything I've done with computers since 1989 is MAC - and this is a great discussion site-- and yet my latest job is using BB's... (and most others are on PC's...)
Saturday 3 October 2009

As far as screwing things up, mine went fine. There were some comments about problems. If you go to crackberry. com, there is a Mac users area, under Forums/Blackberry Operating Systems and Desktop Managent.

Java with Card Management Software

hi every one
i need java interface for card management software like (EDIsecure CMS or IDExpert CMS)
please any help me is there any java interface for the CMS.
in my java application while clicking the print button i need to sent the user information to CMS software.
i already design the template for my card.
then this card management Software apply data value to the template then it will print it.
Thiagu.m

Note: This thread was originally posted in the [Blades - General Discussion|http://forums.sun.com/forum.jspa?forumID=908] forum, but moved to this forum for closer topic alignment.
I had no better idea to where to move that thread.

Q4_How to manage software material and BOM in SAP_High-tech Industry PLM Implementation Issues

Hello,
We are implementing SAP PLM for a high-tech company which designs and manufactures mobile phones (ODM). Since we are new in PLM consulting and we are facing with some implementation difficulties, we are looking for some solutions here.
Question 4: How to manage software material and BOM in SAP?
Currently, software are not managed as material in the BOM. How to manage software material in PLM, can anyone help us with some suggestions.
Question 5: PADS integration with PLM.
Currently, customer is using Pro/E and PADS to design their product. SAP has already provided standard interface for Pro/E integration. But for PADS, there is no such interface. Because of the specialization of electrical components managed in PADS, different from structural parts in Pro/E, how to transfer them between PLM system and manage them in the PLM system has become an difficulty. We will appreciate a lot if anyone can share us with some successful solutions.

Hi,
software, typically a released version of software, is typically managed as a normal material master, and a related document with the code as a package (e.g. ZIP), if really needed.
Software in development is managed typically with a dedicated Software Configuration Management tool like Rational ClearCase, Subversion, MKS Integrity, ....
Regards, Ulf

Quotes for "Managing Software Engineering" and "Advanced Architectures" course material?

I tried sending an e-mail through NI.com and never got a response, so I thought I'd try the forums.
I'm interested in purchasing the course materials for "Managing Software Engineering" and "Advanced Architectures" as part of my CLA prep. There aren't any courses being taught in my area, and nothing seems to be scheduled for an online course. I couldn't find the information searching through the course pages on NI.com.
Does anyone know how much it would cost to get just the course material for self-teaching?
Thanks.
http://linkd.in/mikele

Hi,
You can purchase the course kits.
Here is a link.
http://sine.ni.com/tacs/app/fp/p/ap/ov/lang/en/ol/en/oc/us/pg/1/sn/n5:selfpaced/
You can go to each link, and within the links there is a link to add the product to the basket, so to speak.
Here is some more FYI, sometimes these links can be a bit hard to find.
Here is a link for the online courses.   http://sine.ni.com/tacs/app/fp/p/ap/ov/lang/en/ol/en/oc/us/pg/1/sn/n5nline/
Inside each link you can see the schedule for that course.
Also, at this link you can look over a schedule of courses for your area and online, it shows them all on one list.   http://www.ni.com/training/
Under the section "Build your knowledge with training", there is a link "find a course near you".   On my PC it defaults to my area.
Mark Ramsdale
Project Manager and CLD
Customer Certification and Training at National Instruments

System management software for LV apps on cRIO and Windows

Hello All,
Were I work there is a LabVIEW based project that is a distributed system. This system has a main application that can run on Linux, Windows, or cRIO targets. The main application loads "plugins" depending on what platform it is on to do platform specific things. For example, one plugin uses a DLL interface to communicate with OPC servers. Another plugin measures voltages and currents on cards in the cRIO chassis.
The system occasionally needs updates and the sites where it runs are remote. The current solution is to send a technician who installs a full upgrade. We want to move to a rolling upgrade that is automated.
We can certainly roll our own solution, but before we do that we want to investigate existing solutions.
I believe such systems are under the buzzwords System Management Software and WSUS the windows update solution is one of these.
Is there a System Management Software package that would deploy to cRIOs and Windows machines? (We have the Linux one solved already, although we might redo it if there is something really slick out there.)
Thanks!

Hi,
For cRIO's you might want to have a look at the Real-Time Target System Replication.
Christian

Management Software for AP

To Expert
i need to know about management software for Access Point i know that there is WCS which work as Management software but it deploy on Controller and manage only LAP
Thanks/Regards

For autonomous, Cisco has the WLSE:) or you can look at 3rd party management tools like Wavelink http://www.wavelink.com/solutions/management.aspx
Scott

AP541N Management Software?

Similar Messages

Maybe you are looking for