Apache 1.3 / localhost issues, broken

When I got my MacBook back in July, 2006, I set it up to act as a web server so I could build and develop dynamic websites without having to lease space with a web hosting service. I tinkered with it for a while, installed MySQL 5 and PHP 5. After a while, I stopped tinkering with it due to a loss of interest - and busy work schedules. Now, I'm taking Database Connectivity at school. The class is focused on PHP 5 and MySQL 5, but for some reason now, my Apache 1.3.33 won't work. (I've gone into System Prefs.> Sharing > Personal Web Sharing) and it just sits there saying "Starting up". How can I start it manually from the Terminal? What would I have to do if I can't get it started from the Terminal?
MacBook (black) 2.0GHz, 80GB, 1GB, SuperDrive Mac OS X (10.4.7) iPod mini (silver), SeaGate 300GB FW Ex.Drive, 2.4GHz P4, 200GB + 160GB, 1GB

Similar Messages

File://localhost/ Issue Itunes Can't Find My Music.

I recently upgraded my old hard drive on my computer so after removing the old one and turning it into an external hard drive I have issues with Itunes finding my music files. The files are always in file://localhost/c:/.... is there anyway to get rid of the file://localhost/ because the rest of the directory is correct.

+changed the location of the music folder to E: iTunes Music.+
All this does is make future additions go to that new place.
When you move things around outside of itunes, it loses the path, as you've found.
Can you move everything back and use the Consolidate Library command to move it to the new location?
Here is a good article from iLounge on what you need to understand about the process.
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

Apache and Weblogic - Performance issue

Hi Anuj,
This question should be directed to the weblogic.developer.interest.plug-in
group.
Regarding this issue, this is normal -- the access.log for WebLogic shows
the requests from the proxy. But, instead of showing you the IP address of
the proxy server, it instead shows you the IP address of the client. You
can also verify that this is a different request because the connection to
the proxy server used HTTP/1.1, and the connection to WLS used HTTP/1.0 --
this is the protocol that the proxy plug-in uses to communicate with WLS.
So, in summary, there is only one request made by the client per image, and
the plug-in is in turn making a request to WLS for each image.
Dennis Munsie
Developer Relations Engineer
BEA Support
"Anuj Nijhawan" <[email protected]> wrote in message
news:3c20e890$[email protected]..
>
We have a setup with apache acting as web server and BEA as app server.But it
seems both of them are serving images to the web browser at the same time.This
is consuming lots of memory. Can anybody help rectifing this,
here's what each log file's say,
first Apache (access_log) shows that it served it up:
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET /img/divider.gif
HTTP/1.1"
304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/i_user_collection.gif
HTTP/1.1" 304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/sort_last_manual.gif H
Then BEA (access.log) shows it too:
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET /img/divider.gif
HTTP/1.0"
304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/i_user_collection.gif
HTTP/1.0" 304 0
172.20.100.142 - - [19/Dec/2001:01:20:24 -0800] "GET
/img/sort_manual.gif HTTP/1
.0" 304 0

Localhost issues with flash?

I can't figure this out. When I test a URL page with an
embedded SWF file (using
http://localhost/etc.) I cannot
get the embedded SWF to play more than one or two frames.
However, if I upload this same flash-embedded html page, and
test it on the WWW, then it seesm to play without a glitch.
Any ideas whatsoever!!??

Not enough info to answer specifically but would suspect
timing issue where
the localhost is processing responses to Flash quicker than
the net.
This is possible if you are using any "net" callbacks like
LoadVars, XML,
MovieClipLoader and you are assigning the callback function
to the object
variable after you initiate the load or sendAndLoad, your
local machine may
response so quickly that the callback function assignment
line was not
processed in time.
myObject.load(....)
myObject.onLoad() = function (...)
The load should be last.
Use the examples in the help for the order of these
assignments in code.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"apexman" <[email protected]> wrote in
message
news:ebagu7$kb5$[email protected]..
>
> I can't figure this out. When I test a URL page with an
embedded SWF file
> (using
http://localhost/etc.) I cannot
get the embedded SWF to play more
> than
> one or two frames.
>
> However, if I upload this same flash-embedded html page,
and test it on
> the
> WWW, then it seesm to play without a glitch.
>
> Any ideas whatsoever!!??
>

Localhost issue with Adobe Edge Inspect on iPhone

I'm synching up multiple devices to use Adobe Edge Inspect.
I downloaded and installed:
Chrome extension.
Adobe Edge Inspect on Android (on a Samsung Galaxy Tablet)
Adobe Edge Inspect on iPhone 4
I am using a Windows 64bit OS.
When I inspect online websites, both the tablet and iPhone synch.
I have a local instance of Tomcat.
I have a very simple index.html (Hello World in it).
When I use in my chrome browser localhost:8080 my Android tablet is synched
The iPhone does not synch, and I get a request timeout.
I also attempted using the IP Address instead of localhost with the same result.
The iPhone is synching with sites that I access that are hosted on the web.
How can I get it to synch using Tomcat so that I can use my localhost instance?
Thanks

This is pretty strange. I think you should try making sure Windows Firewall and any other firewall or virus protection software is off and try again to see if you get a different result with your local apache server.
Let us know if that helps. If not we'll see if we can come up with any other ideas.
Mark

Apache pdf file permission issues

I have a intranet site that I need to publish some pdf files. I am using a G5, Leopard and apache 2 and PHP. My PHP is just providing a link the pdf documents, but when a user clicks on the link they get a message "You don't have permission to access /PDF/filename.pdf on this server." I don't think there is any apache configuration to change but maybe I am wrong. Does anyone know what this could be?

Clearly Apache doesn't have permission to serve the files (or the directory it's in).
Check the permissions on the file. it needs to be readable at least by the user _www. The directory it's in also needs to be readable as well as executable (Apache can't look into a directory that isn't executable).

Re: GE72 2QD APACHE PRO - USB Driver Issues Windows 10

Quote from: graneri.fabien on Yesterday at 17:55:44it seems that things are moving and MSI is uploading a lot of drivers for W10
Thanks for the heads up!
I see that my laptop (GS70 2QE) already has the W10...

Yes the model ID is KVR16N11K2/16. I have clear cmos as instructed in the manual and tried to run with just 1 memory. I even tried both by themselves to see if maybe 1 is faulty. The spare graphics card was a Asus 1...

Issues in ssl configuration with apache server (using reverse proxy)

Hi,
I am able to use apache server as a reverse proxy to connect to Portal. When I enter the web server url as https://mywebserver.com, I am able to connect to the http url of the Portal. But the moment I try to connect to the https url of Portal with this https url, I am not able to connect to the Portal. Thus I am not able to use apache as a proxy server for https connections it makes. What must I do. I read that mod_proxy_connect needs to be used, but how do I use this?
The second problem is that I need to use more than one kind of mapping.
For example I must be redirected to the Portal even if I use http://webserver.com , or even if I use https://webserver.com or even if I use http://webserver.com/irj or https://webserver.com/irj or http://ipaddress-websserver/irj etc

I have SSLCertificateFile and
and SSLCertificateKeyFile .
My problem is with regard to ssl/CertificateChainFile?
what is this? Also how do I upload my J2EE Certificate into apache.
The problem is with Apache handshake is not happening.
I am forwarding the entire log during . I have put what I consider important in bold.Please have a look.
<b>----
</b>
Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1769): OpenSSL: Handshake: start
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: before/connect initialization
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv2/v3 write client hello A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 7/7 bytes from BIO#629160 [mem: 47855a8] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 16 03 01 04 1a 02                                ......           |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1488): | 0007 - <SPACES/NULS>
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 1048/1048 bytes from BIO#629160 [mem: 47855af] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 00 36 03 01 44 74 67 cb-38 b5 8e 42 3b 59 c3 6c .6..Dtg.8..B;Y.l |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0010: 23 5c 07 d0 8b 24 89 89-11 2e 0d 80 ed 1a 06 ea #
...$.......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0020: 1d 10 b0 59 10 28 7c b4-02 cb d6 08 a8 e4 ea 5a ...Y.(|........Z |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0030: e5 88 5c 5d 90 00 39 00-0b 00 01 cc 00 01 c9 00 ..
]..9......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0040: 01 c6 30 82 01 c2 30 82-01 2b a0 03 02 01 02 02 ..0...0..+...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0050: 04 36 0b 23 72 30 0d 06-09 2a 86 48 86 f7 0d 01 .6.#r0...*.H.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0060: 01 04 05 00 30 14 31 12-30 10 06 03 55 04 03 13 ....0.1.0...U... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0070: 09 6c 6f 63 61 6c 68 6f-73 74 30 1e 17 0d 30 33 .localhost0...03 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0080: 31 30 30 32 30 37 32 35-30 30 5a 17 0d 30 35 31 1002072500Z..051 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0090: 30 30 32 30 37 32 35 30-30 5a 30 14 31 12 30 10 002072500Z0.1.0. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00a0: 06 03 55 04 03 13 09 6c-6f 63 61 6c 68 6f 73 74 ..U....localhost |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00b0: 30 81 9f 30 0d 06 09 2a-86 48 86 f7 0d 01 01 01 0..0...*.H...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00c0: 05 00 03 81 8d 00 30 81-89 02 81 81 00 ef d6 ff ......0......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00d0: a6 39 e1 64 a5 d3 fb 16-de 4e ee 1d 81 84 31 bc .9.d.....N....1. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00e0: e6 b7 96 07 3e 81 b9 94-d1 c1 e0 f9 00 3a 84 e8 ....>........:.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00f0: 7a 30 11 cd 41 26 d6 6c-95 90 93 95 17 e0 1a b7 z0..A&.l........ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0100: 00 0f 59 33 7d 1d f3 a0-83 17 c5 f3 7e b3 ad ed ..Y3}.......~... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0110: c9 60 ac af 9e 31 d2 ec-42 71 f9 c3 98 2e 93 f9 .`...1..Bq...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0120: 9d c3 c4 3d b3 7d 9b 97-83 1c 6b bd c0 75 cc 96 ...=.}....k..u.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0130: dc b9 a0 1b 00 79 85 e4-19 1f 61 42 54 db 91 94 .....y....aBT... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0140: d8 1d 72 13 08 36 22 49-3b fb 05 dc 33 02 03 01 ..r..6"I;...3... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0150: 00 01 a3 21 30 1f 30 1d-06 03 55 1d 0e 04 16 04 ...!0.0...U..... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0160: 14 ed ed 02 af 94 13 59-1c 42 e6 69 40 e5 80 dd .......Y.B.i@... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0170: a4 e9 33 91 02 30 0d 06-09 2a 86 48 86 f7 0d 01 ..3..0...*.H.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0180: 01 04 05 00 03 81 81 00-2c 22 08 bd 71 b6 80 43 ........,"..q..C |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0190: 5a 2a 8b e8 62 34 b4 b4-84 8a 47 4b 97 5e bf dd Z*..b4....GK.^.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01a0: 17 4c 0a 1c b7 0e cd c5-d1 cc d8 77 cd 38 10 ef .L.........w.8.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01b0: 22 02 f0 02 7f a2 39 2b-53 eb 31 b6 18 49 37 a0 ".....9+S.1..I7. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01c0: 50 47 f2 34 ab 33 eb 5f-ec 5a f9 f7 53 5f 27 eb PG.4.3._.Z..S_'. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01d0: 02 7f b4 28 3e e8 b1 c7-59 df 2c 93 25 c5 34 14 ...(>...Y.,.%.4. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01e0: 7a 34 7c 45 b4 eb 6b 34-93 26 98 51 37 d3 e6 b0 z4|E..k4.&.Q7... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01f0: 7f 83 e3 a9 04 d3 47 b3-3d de 43 57 27 45 82 c0 ......G.=.CW'E.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0200: 4d 48 bf c0 a7 2f 66 0c-0c 00 02 08 00 80 af 76 MH.../f........v |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0210: 1f f5 f6 48 a0 01 0f ed-55 4c 53 9a 7c 07 7a ba ...H....ULS.|.z. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0220: c7 9d 77 e8 8b c7 66 8f-80 03 18 c5 1f 4f 2a a0 ..w...f......O*. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0230: 08 6f 9f e3 13 94 30 56-e7 2f 96 7c 26 97 ba 12 .o....0V./.|&... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0240: aa fd 3e 43 e1 46 c2 d1-32 94 56 45 52 c0 24 6f ..>C.F..2.VER.$o |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0250: 38 e0 93 0f 3a f8 0a 7c-41 0e 4c 54 4f 5a 7e d4 8...:..|A.LTOZ~. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0260: 62 e6 71 cd a0 dc 1e 9b-17 e5 10 71 3c 9d c6 39 b.q........q<..9 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0270: 05 50 b6 15 37 0b 68 4f-24 50 74 47 13 1c 74 d8 .P..7.hO$PtG..t. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0280: 81 27 81 71 3a 4a c5 26-7d b8 e6 21 b3 d9 00 80 .'.q:J.&}..!.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0290: 4f 6f 5d e6 2d dc 77 46-e6 77 b1 94 3d 65 5b b0 Oo].-.wF.w..=e[. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02a0: 3d 39 7a 6c a2 c7 0b e3-27 08 fa 48 8d 75 1a fe =9zl....'..H.u.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02b0: 32 e6 13 d1 31 65 7d d5-11 34 21 78 38 d1 11 fb 2...1e}..4!x8... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02c0: ea 59 8e 24 79 5a 4b c2-f7 98 22 51 9f a7 4d 2b .Y.$yZK..."Q..M+ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02d0: 15 98 fe d4 43 4b 34 25-b3 9b b3 ae 57 d1 ea 69 ....CK4%....W..i |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02e0: 6e 02 7e 61 d7 80 b6 73-6a 3e ac eb 69 38 67 8f n.~a...sj>..i8g. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02f0: a9 2a dc 93 3d 22 f3 6e-6a 5d 51 1f b1 b1 10 5e .*..=".nj]Q....^ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0300: 82 28 48 0d 5a 78 f8 17-61 e0 c5 43 61 7a 42 6a .(H.Zx..a..CazBj |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0310: 00 80 42 fa 7e 11 b2 77-3a 8c de f1 52 5a e1 18 ..B.~..w:...RZ.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0320: d4 e7 8f ee 2c e0 06 ef-d5 37 87 62 07 14 d1 5a ....,....7.b...Z |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0330: ca 30 be fd dd 76 47 8f-ed f4 5f f3 64 6c 32 a9 .0...vG..._.dl2. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0340: d5 07 e2 9b f1 29 a3 bf-33 4a ed 72 6b 2e c3 0f .....)..3J.rk... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0350: 30 bd 13 a1 42 d8 f7 1d-58 8a 1c 53 d6 c3 c8 6e 0...B...X..S...n |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0360: 0e 51 e3 f5 a0 37 68 0d-04 c6 0e c4 4d cc ed 7c .Q...7h.....M..| |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0370: ef 8f 81 b3 52 34 0c 60-eb f8 01 19 cc 95 31 55 ....R4.`......1U |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0380: 7d 16 bf 0c df b8 e0 3d-8f 7c 7a 4a 64 98 93 59 }......=.|zJd..Y |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0390: eb ae 00 80 ef cb bc 38-ab 16 0e a2 b2 2d fa 0f .......8.....-.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03a0: da 55 2d 67 a8 b8 34 1b-bf 39 d9 d6 da 65 f2 8f .U-g..4..9...e.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03b0: 6f a2 b1 1d db bb d5 dd-ab cf 9e 63 00 e4 57 a5 o..........c..W. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03c0: 18 4a dc 60 b0 97 5d 67-34 96 bf a2 43 2b 7d 70 .J.`..]g4...C+}p |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03d0: d6 99 d2 31 d2 11 f4 f2-19 b8 0c 41 7d bf b1 7c ...1.......A}..| |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03e0: fb 31 cb 3e c2 0a e2 26-1a 7e 63 50 9b 62 c3 82 .1.>...&.~cP.b.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03f0: ca cd 36 82 0c 56 5f 26-f6 cc c6 6f 03 92 cc f5 ..6..V_&...o.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0400: 6b 55 1a d6 92 f9 5b 59-18 c2 62 21 eb d8 a4 ea kU....[Y..b!.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0410: fd b6 3e f7 0e                                   ..>..            |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1488): | 1048 - <SPACES/NULS>
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server hello A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server certificate A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server key exchange A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server done A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write client key exchange A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write change cipher spec A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write finished A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 flush data
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 5/5 bytes from BIO#629160 [mem: 47855a8] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 15 03 01 00 02                                   .....            |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 2/2 bytes from BIO#629160 [mem: 47855ad] (BIO dump follows)
Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 02 28                                            .(               |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1782): OpenSSL: Read: SSLv3 read finished A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1801): OpenSSL: Exit: failed in SSLv3 read finished A
[Wed May 24 07:03:54 2006] [info] SSL Proxy connect failed
[Wed May 24 07:03:54 2006] [info] SSL Library Error: 336151568 error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure
[Wed May 24 07:03:54 2006] [info] Connection to child 249 closed with abortive shutdown(server apacheserver:443, client j2eeserver)
[Wed May 24 07:03:54 2006] [error] (20014)Error string not specified yet: proxy: pass request body failed to j2eeserver:50001 (j2eeserver)
[<b>Wed May 24 07:03:54 2006] [error] (20014)Error string not specified yet: proxy: pass request body failed to j2eeserver:50001 (j2eeserve) from apacheserver ()
[Wed May 24 07:04:10 2006] [debug] ssl_engine_io.c(1523): OpenSSL: I/O error, 5 bytes expected to read on BIO#612610 [mem: 62ac80]
[Wed May 24 07:04:10 2006] [info] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : SSL input filter read failed.
[Wed May 24 07:04:10 2006] [debug] ssl_engine_kernel.c(1787): OpenSSL: Write: SSL negotiation finished successfully
[Wed May 24 07:04:10 2006] [info] Connection to child 249 closed with standard shutdown(server apacheserver:443, client apacheserver)
</b>

[solved] Owncloud over SSL: http works, but over https only apache

Hello,
I try to setup owncloud with SSL.
Accessing over http works, but over https, I reach the default apache page instead of the owncloud page.
(I set up SSL according to https://wiki.archlinux.org/index.php/LAMP#SSL )
How could I make the owncloud site available over https?
relevant files:
owncloud.conf:
<IfModule mod_alias.c>
Alias /owncloud /usr/share/webapps/owncloud/
</IfModule>
<Directory /usr/share/webapps/owncloud/>
Options FollowSymlinks
Require all granted
php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/owncloud/:/etc/webapps/owncloud/:/mt/daten/owncloud/"
</Directory>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot /usr/share/webapps/owncloud
ServerName http://example.com/owncloud
</VirtualHost>
I tried to change 80 to 443, but then, systemctl restart httpd didn't work. (apache failed)
httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
<IfModule mod_ssl.c>
Listen 443
</IfModule>
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#own additions:
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
Options FollowSymLinks
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Include owncloud
Include /etc/httpd/conf/extra/owncloud.conf
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
thanks!
Last edited by Carl Karl (2014-05-06 07:40:53)

OK, solved.
What I made wrong:
https://localhost leads to the apache page
https://localhost/owncloud leads to the owncloud page.
(Just as an information if there are other apache noobs like me...)

Connectivity issue between ABAP and JAVA stack

Hi All
we are facing the following issue while running interface. message got failed while processing Graphical mapping in Java stack. Can any one please help us what could be the issue here? Is there anything we missed from Config / XI development.
This message was failed with not more than 200 MB file.
XIServer
JCO_SYSTEM_FAILURE
connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
"SYSTEM FAILURE" during JCo call. connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
A
Appreciate your quick response.

Hi Yadagiri,
Please check the reply from Carlos in the below thread
Re: increasing heapsize of java on WINDOWS 2003
Also check your sm59 RFC destination, i guess there is some problem.
Delete AI_RUNTIME_JCOSERVER(RFC connection between the Java engine and the ABAP engine) and create it again.
Hope tht will resolve ur issue...
Regds,
Pinangshuk.

Perl won't load GD::Graph::pie in Apache, but does with terminal.

It took me forever to get GD to work at all. Now I'm totally stuck. I hope someone can help me. If I run my cgi file from terminal using "perl /Library/WebServer/CGI-Executables/GraphTest.cgi" it prints the "jpeg". If I run it from apache using "http://localhost/cgi-bin/GraphTest.cgi", I get an error saying "Can't locate GD/Graph/pie.pm" along with the typical PATH settings and such. Why can perl run the script without issue, but using web sharing/apache perl can't find the perl module? I assume this is an apache issue?
More details:
*I finally got GD installed using port
*Every time I attempted to install GD and it failed, I erased the HDD and reinstalled OSX. So, this is a very fresh install.
*This is Snow Leopard, not Snow Leopard Server
*If I add the following two lines and run, "sudo perl /Library/WebServer/CGI-Executables/GraphTest.cgi" it will create the graph in my profile directory:
open(GRAPH,">graph5.jpg") || die "Cannot open graph5.jpg: $!\n";
print GRAPH $graph->gd->jpeg(100);
*The cgi file:
#!/usr/bin/perl -w
use strict;
use GD::Graph::pie;
use Text::CSV_XS;
my @data;
my $csv = new Text::CSV_XS;
open(FILE,"/Library/WebServer/data/testmetrics.csv") || die "Cannot open testmetrics.csv: $!\n";
while (my $line = <FILE>) {
$csv->parse($line);
my @col = $csv->fields;
push(@data,\@col);
my $graph = new GD::Graph::pie(300, 300);
$graph->set(
title => 'Revenue by Category for 2001',
label => 'Category',
axislabelclr => 'black',
'3d' => 1,
start_angle => 90,
suppress_angle => 5,
) or warn $graph->error;
$graph->plot(\@data) or die $graph->error;
print $graph->gd->jpeg(100);

Charles Minow wrote:
Hi--
Welcome to the Apple Discussions.
I see some problems with your script, though they wouldn't be a problem with GD::Graph::pie. I'm not sure yet what that problem is.
This script works on my computer:
#!/usr/bin/perl
use strict;
use GD::Graph::pie;
use CGI qw(:standard);
my @data = (
["1st","2nd","3rd","4th","5th","6th"],
[ 4, 2, 3, 4, 13, 3.5]
my $my_graph = new GD::Graph::pie( 250, 200 );
#$my_graph = new GD::Graph::pie( );
$my_graph->set(
title => 'A Pie Chart',
label => 'Label',
axislabelclr => 'black',
pie_height => 36,
l_margin => 15,
r_margin => 15,
start_angle => 235,
transparent => 0,
$my_graph->plot(@data);
print header('Content-type' => 'image/jpeg');
binmode STDOUT;
print $my_graph->gd->jpeg(100);
Note that I included the CGI module, and printed a header with the content type before sending the graphic.
If that script doesn't work on your computer, I'd be interested in seeing the output of this script (run by Apache, of course):
#!/usr/bin/perl
use strict;
use CGI qw(:standard);
print header();
print qq(Perl version (Apache): ) . $] . qq(
my $info = qx(perl -V);
print qq(<pre>$info</pre>
foreach my $key (sort keys %ENV) {
print qq($key = $ENV{$key}
I'd also be curious to see the results of "perl -V" vs. "/usr/bin/perl -V" run from the command line. Perhaps you are somehow using two different Perls...
charlie
Charles Minow wrote:
Hi--
Welcome to the Apple Discussions.
I see some problems with your script, though they wouldn't be a problem with GD::Graph::pie. I'm not sure yet what that problem is.
This script works on my computer:
#!/usr/bin/perl
use strict;
use GD::Graph::pie;
use CGI qw(:standard);
my @data = (
["1st","2nd","3rd","4th","5th","6th"],
[ 4, 2, 3, 4, 13, 3.5]
my $my_graph = new GD::Graph::pie( 250, 200 );
#$my_graph = new GD::Graph::pie( );
$my_graph->set(
title => 'A Pie Chart',
label => 'Label',
axislabelclr => 'black',
pie_height => 36,
l_margin => 15,
r_margin => 15,
start_angle => 235,
transparent => 0,
$my_graph->plot(@data);
print header('Content-type' => 'image/jpeg');
binmode STDOUT;
print $my_graph->gd->jpeg(100);
Note that I included the CGI module, and printed a header with the content type before sending the graphic.
If that script doesn't work on your computer, I'd be interested in seeing the output of this script (run by Apache, of course):
#!/usr/bin/perl
use strict;
use CGI qw(:standard);
print header();
print qq(Perl version (Apache): ) . $] . qq(
my $info = qx(perl -V);
print qq(<pre>$info</pre>
foreach my $key (sort keys %ENV) {
print qq($key = $ENV{$key}
I'd also be curious to see the results of "perl -V" vs. "/usr/bin/perl -V" run from the command line. Perhaps you are somehow using two different Perls...
charlie
Hi Charles,
Thank you much for the reply. I changed my script to exactly what you requested. I got the same old...
"[Wed Jan 06 23:02:15 2010] [error] [client ::1] Can't locate GD/Graph/pie.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at /Library/WebServer/CGI-Executables/GraphTest.cgi line 4.
[Wed Jan 06 23:02:15 2010] [error] [client ::1] BEGIN failed--compilation aborted at /Library/WebServer/CGI-Executables/GraphTest.cgi line 4.
[Wed Jan 06 23:02:15 2010] [error] [client ::1] Premature end of script headers: GraphTest.cgi"
The output of your other script is:
"Perl version (Apache): 5.010000
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=darwin, osvers=10.0, archname=darwin-thread-multi-2level
uname='darwin neige.apple.com 10.0 darwin kernel version 10.0.0d8: tue may 5 19:29:59 pdt 2009; root:xnu-1437.2~2release_i386 i386 '
config_args='-ds -e -Dprefix=/usr -Dccflags=-g -pipe -Dldflags= -Dman3ext=3pm -Duseithreads -Duseshrplib -Dincversionlist=none -Dcc=gcc-4.2'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc-4.2', ccflags ='-arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include',
optimize='-Os',
cppflags='-g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='4.2.1 (Apple Inc. build 5646)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Offt='offt', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc-4.2 -mmacosx-version-min=10.6', ldflags ='-arch x86_64 -arch i386 -arch ppc -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-ldbm -ldl -lm -lutil -lc
perllibs=-ldl -lm -lutil -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=true, libperl=libperl.dylib
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-arch x86_64 -arch i386 -arch ppc -bundle -undefined dynamic_lookup -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERLDONT_CREATEGVSV
PERLIMPLICITCONTEXT PERLMALLOCWRAP USE64_BITALL
USE64_BITINT USE_ITHREADS USELARGEFILES
USE_PERLIO USEREENTRANTAPI
Locally applied patches:
/Library/Perl/Updates/ comes before system perl directories
installprivlib and installarchlib points to the Updates directory
Built under darwin
Compiled at Jun 24 2009 00:35:27
@INC:
/Library/Perl/Updates/5.10.0
/System/Library/Perl/5.10.0/darwin-thread-multi-2level
/System/Library/Perl/5.10.0
/Library/Perl/5.10.0/darwin-thread-multi-2level
/Library/Perl/5.10.0
/Network/Library/Perl/5.10.0/darwin-thread-multi-2level
/Network/Library/Perl/5.10.0
/Network/Library/Perl
/System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level
/System/Library/Perl/Extras/5.10.0
DOCUMENT_ROOT = /Library/WebServer/Documents
GATEWAY_INTERFACE = CGI/1.1
HTTP_ACCEPT = application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/pn g,/;q=0.5
HTTPACCEPTENCODING = gzip, deflate
HTTPACCEPTLANGUAGE = en-us
HTTP_CONNECTION = keep-alive
HTTP_HOST = localhost
HTTPUSERAGENT = Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6; en-us) AppleWebKit/531.9 (KHTML, like Gecko) Version/4.0.3 Safari/531.9
PATH = /usr/bin:/bin:/usr/sbin:/sbin
QUERY_STRING =
REMOTE_ADDR = ::1
REMOTE_PORT = 49513
REQUEST_METHOD = GET
REQUEST_URI = /cgi-bin/GraphTest2.cgi
SCRIPT_FILENAME = /Library/WebServer/CGI-Executables/GraphTest2.cgi
SCRIPT_NAME = /cgi-bin/GraphTest2.cgi
SERVER_ADDR = ::1
SERVER_ADMIN = [email protected]
SERVER_NAME = localhost
SERVER_PORT = 80
SERVER_PROTOCOL = HTTP/1.1
SERVER_SIGNATURE =
SERVER_SOFTWARE = Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8k DAV/2
VERSIONERPERL_PREFER_32BIT = no
VERSIONERPERLVERSION = 5.10.0
_CF_USER_TEXTENCODING = 0x46:0:0"
Your other request of "perl -V" outputs:
"Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=darwin, osvers=10.0.0, archname=darwin-2level
uname='darwin itca-display-9235.local 10.0.0 darwin kernel version 10.0.0: fri jul 31 22:47:34 pdt 2009; root:xnu-1456.1.25~1release_i386 i386 '
config_args='-des -D prefix=/opt/local -D scriptdir=/opt/local/bin -D cppflags=-I/opt/local/include -D ldflags=-L/opt/local/lib -D vendorprefix=/opt/local -D man1ext=1pm -D man3ext=3pm -D cc=/usr/bin/gcc-4.2 -D ld=/usr/bin/gcc-4.2 -D man1dir=/opt/local/share/man/man1p -D man3dir=/opt/local/share/man/man3p -D siteman1dir=/opt/local/share/man/man1 -D siteman3dir=/opt/local/share/man/man3 -D vendorman1dir=/opt/local/share/man/man1 -D vendorman3dir=/opt/local/share/man/man3 -D incversionlist=5.8.8 5.8.8/darwin-2level -U i_bind -U i_gdbm -U i_db'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='/usr/bin/gcc-4.2', ccflags ='-fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -pipe -I/opt/local/include',
optimize='-O3',
cppflags='-I/opt/local/include -no-cpp-precomp -fno-common -DPERL_DARWIN -I/opt/local/include -no-cpp-precomp -fno-strict-aliasing -pipe -I/opt/local/include'
ccversion='', gccversion='4.2.1 (Apple Inc. build 5646)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Offt='offt', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='env MACOSXDEPLOYMENTTARGET=10.3 /usr/bin/gcc-4.2', ldflags ='-L/opt/local/lib'
libpth=/opt/local/lib /usr/lib
libs=-ldbm -ldl -lm -lutil -lc
perllibs=-ldl -lm -lutil -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-L/opt/local/lib -bundle -undefined dynamic_lookup'
Characteristics of this binary (from libperl):
Compile-time options: PERLMALLOCWRAP USE64_BITALL USE64_BITINT
USEFASTSTDIO USELARGEFILES USE_PERLIO
Built under darwin
Compiled at Jan 6 2010 17:16:53
@INC:
/opt/local/lib/perl5/site_perl/5.8.9/darwin-2level
/opt/local/lib/perl5/site_perl/5.8.9
/opt/local/lib/perl5/site_perl
/opt/local/lib/perl5/vendor_perl/5.8.9/darwin-2level
/opt/local/lib/perl5/vendor_perl/5.8.9
/opt/local/lib/perl5/vendor_perl
/opt/local/lib/perl5/5.8.9/darwin-2level
/opt/local/lib/perl5/5.8.9
And finally, "/usr/bin/perl -V" outputs
"Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=darwin, osvers=10.0, archname=darwin-thread-multi-2level
uname='darwin neige.apple.com 10.0 darwin kernel version 10.0.0d8: tue may 5 19:29:59 pdt 2009; root:xnu-1437.2~2release_i386 i386 '
config_args='-ds -e -Dprefix=/usr -Dccflags=-g -pipe -Dldflags= -Dman3ext=3pm -Duseithreads -Duseshrplib -Dincversionlist=none -Dcc=gcc-4.2'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc-4.2', ccflags ='-arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include',
optimize='-Os',
cppflags='-g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='4.2.1 (Apple Inc. build 5646)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Offt='offt', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc-4.2 -mmacosx-version-min=10.6', ldflags ='-arch x86_64 -arch i386 -arch ppc -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-ldbm -ldl -lm -lutil -lc
perllibs=-ldl -lm -lutil -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=true, libperl=libperl.dylib
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-arch x86_64 -arch i386 -arch ppc -bundle -undefined dynamic_lookup -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERLDONT_CREATEGVSV
PERLIMPLICITCONTEXT PERLMALLOCWRAP USE64_BITALL
USE64_BITINT USE_ITHREADS USELARGEFILES
USE_PERLIO USEREENTRANTAPI
Locally applied patches:
/Library/Perl/Updates/<version> comes before system perl directories
installprivlib and installarchlib points to the Updates directory
Built under darwin
Compiled at Jun 24 2009 00:35:27
@INC:
/Library/Perl/Updates/5.10.0
/System/Library/Perl/5.10.0/darwin-thread-multi-2level
/System/Library/Perl/5.10.0
/Library/Perl/5.10.0/darwin-thread-multi-2level
/Library/Perl/5.10.0
/Network/Library/Perl/5.10.0/darwin-thread-multi-2level
/Network/Library/Perl/5.10.0
/Network/Library/Perl
/System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level
/System/Library/Perl/Extras/5.10.0
So, I guess you were right. I'm running two different perls. The first one looks like it was installed by port along with GD. Is it possible to get the default perl to run GD?

Create Adobe PDF from Word DOCX Issue

Good Morning All,
We have stumbled across an apparently well-known issue, which annoyingly for all concerned does not seem to have a satisfying answer. One rather long discussion is here: http://forums.adobe.com/message/4237240. There is at least one other which also alludes to the issue basically involving Office 2010 SP1 and having the Word user template location re-directed to a network drive. None of the suggested things have worked, and we do not want to even try the user template location on a local drive, we want a fix for what is really a fairly standard scenario.
I think we have found something new to add to the mix, this is noted later in the post. For completeness I have also included a condensed version of events/stuff we have tried, to help anybody who reads this and may have an answer.
Our scenario is as follows:
We recently performed a Microsoft Office 2007 to Office 2010 SP1 upgrade. A week or so in advance of this we upgraded all those folks that had Adobe Acrobat Pro 9 to X, (v10.0.0).
Within a couple of days of the Office upgrade we had reports of an issue whereby users could not convert Word documents to PDF. Window title: Create Adobe PDF, message: Unable to open the document <path to file>. Please check to see if you have permission for the above file. (The user always does have rights to the location.)
All machines are 32bit Windows 7 and well capable of running this OS and these apps.
Machine patching is maintained by SCCM.
Deployment of Acrobat and Office was done by SCCM.
The issue broken down:
Conversion of Word documents to PDF fails in these scenarios:
Windows Explorer – right click of single file and ‘Convert to PDF’.
Windows Explorer – right click of multiple files and batch conversion option.
Outlook – Convert to PDF and e-mail. (Error message is different, apologies I have no note of this to hand.)
It should be noted that conversion of any other file format works, plus conversion of Word documents consistently works inside the Word interface using Adobe toolbar.
Not consistently a user based issue:
It usually * fails for our main test user on her PC. Although sometimes a single file or batch file conversion will work. However the option in Outlook never works. (* Every so often the single file and batch conversion’s do work for the test user, there is no obvious reason as we have not applied any fixes that worked!)
Everything works fine for the test user on my PC and another PC in her department.
Not consistently a machine based issue.
The process always works for me on my machine, but fails most of the time when I use the test users PC.
The process always works for a test account cloned from the test user’s actual account.
Giving local admin rights to the test user did not help.
Summary of things tried:
Various forum suggestions have not worked:
Deleting/renaming normal.dotm worked initially but the problem returned within a couple of days.
Registering some Adobe DLL's: C:\Program Files\Adobe\Acrobat 10.0\PDFMaker\Office\PDFMOfficeAddin.dll & C:\Program Files\Adobe\Acrobat 10.0\PDFMaker\Common\AdobePDFMakerX.dll.
The Word Add-in tool bar is enabled.
The users name and intials are present in Word options.
There are no rogue temp files in %temp% or C:\users\<user>\appdata\roaming\microsoft\word.
Stuff we have tried independently:
Repair Office install then repair Adobe install.
Patching Acrobat to 10.1.1 & 10.1.4.
Remove and re-install of Acrobat, including patch.
Remove and re-install of Acrobat Pro and Reader, (using the official Adobe labs removal tool), including patch. (When products were removed Office was repaired. Just Acrobat Pro X was installed after, no Reader.)
During this work I noticed two files in %temp% which get updated when file conversion is attempted: amt.log and swtag.log. After Googling these files I found there may be some interesting stuff in amt.log when the process fails. Unfortunately this has not been the case. There is no obvious log entry difference between a successful conversion and a failure.
However at this time I started to notice files in %temp% in the following format: cv*.tmp.cvr. Google revealed these to be Office crash dump files. Unfortunately these files are always zero bytes long and literally contain nothing to analyse!
So after clearing out all these .cvr files I ran Task Manager, and had %temp% open in a folder. I then tried the conversion process:
Firstly it fails!
Secondly a zero byte .cvr file is created and usually disappears right away.
Thirdly winword.exe appears and disappears quickly in Task Manager.
You can repeat this to your heart’s content by hitting the retry button!
The only thing I can add about my PC is that I never had Acrobat until I tried installing it to re-create the issue. So it may be that my PC having no legacy Adobe install issues, (I only had Reader previously), was less prone to whatever is the root of this issue? The affected machines in the field have at least been upgraded from v9.
As you can tell we have found it very hard to pin the issue down. The circumstances for a failure are not consistently repeatable. I do think the key thing we have noticed though is the obvious crashing of winword.exe when this process fails. As evidenced by the creation of the cv*.tmp.cvr files and watching the process appear and disappear in Task Manager. Nothing I have read elsewhere notes this, and it seems to me that winword.exe does not like being called in this way. This is surely very key to the issue?

I should also add that there are no error messages appearing on screen when we have a failure, and nothing is logged in any Windows event log.
I have done lots more searching since first reporting this. Lots of people have this issue going back to last year at least with Office 2010 SP1 Acrobat X. No answers or fixes out there apparently despite being promised to some people who have done a bug report.
This is really not good enough. I have reported our scenario as a bug report earlier today. Hopefully I will get a proper fix, then I will gladly pass it on.

11.5.10.2 - Why So Many Apache Bounces

Hello.
We have been struggling for years between 11.5.9 and 11.5.10.0 and 11.5.10.1 and 11.5.10.2 to get updates to properly appear on the self-service home page after changes to functions, menus, profile options, and even added responsibilities.
What can often happen is when a change is made, it is not always reflected on the SS Home Page until after Apache is bounced. Clearing the client's browser cache has no effect. Only an Apache bounce fixes the issue.
Oracle Support has been little help. They admitted to the issues in 11.5.9 and assured us that in 11.5.10 it would be fixed. Here we are now are CU2 and it's still a problem.
Although it does not happen every time, it is often enough to cause plenty of bounces to be needed. This won't work for production, that's for sure.
The problem has been reduced in each newer version of the Apps, but it has not been resolved.
Has anyone determined a work around that they can share?
Thank you.

I agree that sometimes the need to bounce Apache after every change is ridiculous. OAF development within JDeveloper should weed out the testing issues (although I can't get Jdeveloper to work for every development test I do).
However, changes to the UI through personalisation, FND changes etc should never require a bounce in my view.
An even more frustrating problem is workflow development now, where, PL/SQL package states are cached in the JVM database connection and if you change them you get invalid package state exceptions, which, using the OAF Workflow Manager are sometimes impossible to clear without a bounce.
Never used to be this hard with the old PL/SQL Server pages!!
Ideally there should be a way of purging an object from the JVM and forcing it to reload the new state so bounces would not be required. That may or may not be technically possible as it's definitely over my head!!
Any more views?
Chris

WebLogic and Apache

Hi,
          We are developing an application using WebLogic ejb and servlet and we
          are planning to use Apache as the HTTP server. Are there any know
          issues about this combination?
          According to the manual, the mod_proxy of Apache can be used to link
          Apache and Weblogic. Has anybody done that?
          Thanks,
          Cecil Pang
          [email protected]


This doesn't sound like a definitive answer. Are you saying we will NOT
          support you if you use Apache?
          Should it work? What are people doing wrong? The answer below isn't
          much help IMHO.
          Prasad Peddada wrote:
          >
          > At this point we don't have plugins for Apache. We have plugins for NES, IIS only.
          >
          > Thanks
          > Prasad
          >
          > HBO wrote:
          >
          > > Barbara, thanks for the reply.
          > >
          > > So, are we saying that we should not use Apache with Weblogic Server? I
          > > browsed through the discussion groups and I found no definitive answer to this
          > > question. How about folks from BEA/Weblogic? What is your recommendation?
          > >
          > > At this point, we can either go with Apache or Netscape HTTP server. But we
          > > would like to use Apache unless there are issues in linking it to Weblogic
          > > Server.
          > >
          > > Any advice will be appreciated.
          > >
          > > Cecil Pang
          > > 10 Dimensions Technologies Inc.
          > > [email protected]
          > >
          > > Barbara Singer wrote:
          > >
          > > > Hello:
          > > >
          > > > We have tried to setup the exact configuration but with no success to date.
          > > > We are using WebLogic Application Server 4.51 and Apache by
          > > > Stronghold/C2Net. However, this has not worked with the standard Apache
          > > > distrubution either.
          > > >
          > > > /bas
          > > > HBO <[email protected]> wrote in message news:[email protected]...
          > > > > Hi,
          > > > >
          > > > > We are developing an application using WebLogic ejb and servlet and we
          > > > > are planning to use Apache as the HTTP server. Are there any know
          > > > > issues about this combination?
          > > > >
          > > > > According to the manual, the mod_proxy of Apache can be used to link
          > > > > Apache and Weblogic. Has anybody done that?
          > > > >
          > > > > Thanks,
          > > > > Cecil Pang
          > > > > [email protected]
          > > > >
          From Tom Gerber (Surnames: Archer, Knaeble, Lahiff, Mooney, Preisen,
          Sexton)

Weblogic apache HTTP configuration question

Hi All,
Here is my current configuration:
Oracle Weblogic 10.01
Linux Centos 5
Apache HTTP 2.2
LoadModule weblogic_module modules/mod_wl_22.so
<Location /TESTCRM>
<IfModule mod_weblogic.c>
SetHandler weblogic-handler
WeblogicHost 192.168.100.20
WebLogicPort 8002
CookieName SAGPHSESSIONID
Debug ON
KeepAliveEnabled ON
WLSocketTimeoutSecs 5
WLLogFile "D:/Apache2.2/logs/wlproxy.log"
</IfModule>
</Location>
It works fine. http://localhost/TESTCRM load the application located on the Weblogic server.
Is there way to exclude certain directory from being loaded from weblogic server?
We want resource folder to be loaded from local apache machine.
http://localhost/TESTCRM/resource (resource folder is located on the apache htdoc folder)
How can I exclude the resource folding loading via weblogic module? Is that possible? What alternative option do I have? I am new with apache so any help will really appropriate it.
Here is wlproxy.log (error it trying to load resource from weblogic server but it getting 404 since it does not exist there)
================New Request: [GET /TESTCRM/resources/resources/css/reset-min.css HTTP/1.1] =================
Fri Oct 16 11:33:29 2009 <314012557072091> INFO: SSL is not configured
Fri Oct 16 11:33:29 2009 <314012557072091> Using Uri /TESTCRM/resources/resources/css/reset-min.css
Fri Oct 16 11:33:29 2009 <314012557072091> After trimming path: '/TESTCRM/resources/resources/css/reset-min.css'
Fri Oct 16 11:33:29 2009 <314012557072091> The final request string is '/TESTCRM/resources/resources/css/reset-min.css'
Fri Oct 16 11:33:29 2009 <314012557072091> Host extracted from serverlist is [192.168.100.20]
Fri Oct 16 11:33:29 2009 <314012557072091> Initializing lastIndex=0 for a list of length=1
Fri Oct 16 11:33:29 2009 <314012557072091> getListNode: created a new server node: id='192.168.100.20:8002' server_name='172.24.0.81', port='80'
Fri Oct 16 11:33:29 2009 <314012557072091> attempt #0 out of a max of 5
Fri Oct 16 11:33:29 2009 <314012557072091> Trying a pooled connection for '192.168.100.20/8002/8002'
Fri Oct 16 11:33:29 2009 <314012557072091> getPooledConn: No more connections in the pool for Host[192.168.100.20] Port[8002] SecurePort[8002]
Fri Oct 16 11:33:29 2009 <314012557072091> general list: trying connect to '192.168.100.20'/8002/8002 at line 2619 for '/TESTCRM/resources/resources/css/reset-min.css'
Fri Oct 16 11:33:29 2009 <314012557072091> INFO: New NON-SSL URL
Fri Oct 16 11:33:29 2009 <314012557072091> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Fri Oct 16 11:33:29 2009 <314012557072091> EINPROGRESS in connect() - selecting
Fri Oct 16 11:33:29 2009 <314012557072091> Local Port of the socket is 1281
Fri Oct 16 11:33:29 2009 <314012557072091> Remote Host 192.168.100.20 Remote Port 8002
Fri Oct 16 11:33:29 2009 <314012557072091> general list: created a new connection to '192.168.100.20'/8002 for '/TESTCRM/resources/resources/css/reset-min.css', Local port:1281
Fri Oct 16 11:33:29 2009 <314012557072091> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Fri Oct 16 11:33:29 2009 <314012557072091> URL::parseHeaders: StatusLine set to [404 Not Found]
Fri Oct 16 11:33:29 2009 <314012557072091> parsed all headers OK
Fri Oct 16 11:33:29 2009 <314012557072091> sendResponse() : r->status = '404'
Fri Oct 16 11:33:29 2009 <314012557072091> for 192.168.100.20/8002/8002, updated JVMID: -574096105
Fri Oct 16 11:33:29 2009 <314012557072091> canRecycle: conn=1 status=404 isKA=0 clen=1214 isCTE=0
Fri Oct 16 11:33:29 2009 <314012557072091> closeConn: URL.canRecycle() returns false, deleting URL '192.168.100.20/8002'
Fri Oct 16 11:33:29 2009 <314012557072091> request [TESTCRM/resources/resources/css/reset-min.css] processed sucessfully..
Let me know if you need any other information
Thanks
Sayef

have you tried:
WLExcludePathOrMimeType /TESTCRM/resource
http://download-llnw.oracle.com/docs/cd/E15051_01/wls/docs103/plugins/plugin_params.html#wp1143055

Apache 1.3 / localhost issues, broken

Similar Messages

Maybe you are looking for