Apache 2.2 and ColdFusion MX

I have ColdFusion MX 7 and Apache 2.2.4 installed on my
machine, I have ran the latest JRUN connector which created all the
necessary entries in apache etc.
When I try to serve a coldfusion template, I get a 'You have
chosen to open' alert i.e.doesn't recognise the cfm template.
Does anyone know why this is?

I get the same issue when I try to install ColdFusion 8 on
Apache 2.2.4 (on XP). I get to the part where you have to restart
the Apache service, and then go to the "ColdFusion 8 Configuration
and Settings Migration Wizard" via the URL:
http://localhost/cfide/administrator/index.cfm
And I get asked "Do I want to Save the file index.cfm". What
is going on. I have carefully followed the ACME guide and watch
some screencasts, and nobody seems to have this problem. Any
ideas?

Similar Messages

Need Paths For Configuration Apache 2.2 And Coldfusion MX7

Please provide the default configuration directory and also
the directory and file name of the server binary for the drop down
configuration list in Cold Fusion to configure Coldfusion MX7 to
work with Apache 2.2. I need this immediately. I thank you in
advance!!!!!

Is this what you are looking for?
http://www.adobe.com/go/8001e97
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"spinaweb" <[email protected]> wrote in
message news:ervso2$n7c$[email protected]..
> Please provide the default configuration directory and
also the directory and
> file name of the server binary for the drop down
configuration list in Cold
> Fusion to configure Coldfusion MX7 to work with Apache
2.2. I need this
> immediately. I thank you in advance!!!!!
>

Scientific Linux 6.2 64-bit and ColdFusion 10 tips.

Just thought I'd let you guys know, that ColdFusion 10 public beta is working fine in SL6.2 64-bit, at least that's how it looks initially - didn't test much yet, but writeoutput(1+1); equals 2!
As with CentOS CF9 installation, you need to do a few tricks. With CF10, you need to install unzip as well.
Install Apache first.
Before installing ColdFusion:
yum install libstdc++.so.5
yum install httpd-devel
yum install unzip
yum install compat-libstdc++-33.x86_64
Run the ColdFusion installer, and choose to configure Apache.
After installing ColdFusion, before running it:
edit /opt/coldfusion10/cfusion/bin/connectors/apache_connector.sh with a text editor, and change the -dir, -bin and -script parameter values to something which match your config. (This must not be a bug, since it hasn't been fixed in CF8 nor CF9 either )
Typically to: -dir /etc/httpd/conf , -bin /usr/sbin/httpd, and -script /etc/rc.d/init.d/httpd
Start ColdFusion and restart Apache if necessary. Worked for me!
If you get a NullpointerException when running the CFIDE/administrator/index.cfm , you've probably just set up a new machine which isn't found by the DNS yet, or the domain name hasn't been configured at all.
Edit your /etc/hosts file, and add the machine's name to the localhost entries. For example, if your machine bottom-level name is mymachine, append "127.0.0.1 localhost localhost.localdomain" so it reads "127.0.0.1 localhost localhost.localdomain mymachine".
Do the same for the ipv6 line if/when necessary.

Hi,
did you encounter errors as mentioned on this thread (on CentOS 5.x) ?
http://forums.adobe.com/message/4485228
[Mon May 21 22:02:54 2012] [3461:47024938890000] [error] jk_open_socket::jk_conn
ect.c (448): socket() failed (errno=22)
[Mon May 21 22:02:54 2012] [3461:47024938890000] [info] ajp_connect_to_endpoint:
:jk_ajp_common.c (1027): Failed opening socket to (127.0.0.1:8012) (errno=22)
[Mon May 21 22:02:54 2012] [3461:47024938890000] [error] ajp_send_request::jk_aj
p_common.c (1649): (cfusion) connecting to backend failed. Tomcat is probably no
t started or is listening on the wrong port (errno=22)
appreciate if you can share the fix
Thanks,
Junior

Apache-Mod_jk-Tomcat and SSL certificate

Hi all.
I have Apache 2.0.55 working with Tomcat 5.5 via mod_jk connector.
I have generated a self-signed cerificate for Apache using openssl, and I use it to encrypt both URLs served by Apache and URLs served by Tomcat through mod_jk.
When a "https URL" is forwarded to Tomcat, an exception is thrown by the webapp, unless the certificate has not been set as "trusted" on Tomcat side.
So, it seems like I have to do the following:
1) generate a a self-signed cerificate for Apache using openssl.
2) import this certificate in a keystore
3) set the keystore as trusted (System.setProperty("javax.net.ssl.trustStore", PATH_TO_KEYSTORE));
I'm wondering if there's a better way to accomplish that, not forcing me to do all this steps and, above all, allowing me to "break" the link between the apache cert and the tomcat keystore.
Any help will be very appreciated!

usually u generate a keystore for client, and mention that in ur SSL connector of tomcat
in apache, we need to configure things in ssl.conf

How do I save a file to a server using flex and coldfusion?

How do I save a file to a server using flex and coldfusion?
On the CF side I might need to use this:
<cffile action="UPLOAD" filefield="Filedata"
destination="#expandpath('..\somepath)#"
nameconflict="overwrite">
And on the flex side I might need to use something like this:
var sendVars:URLVariables = new URLVariables();
sendVars.action = "upload";
var request:URLRequest = new URLRequest();
request.data = sendVars;
request.url = _strUploadScript;
request.method = URLRequestMethod.POST;
_refUploadFile = new FileReference();
_refUploadFile = _arrUploadFiles[_numCurrentUpload].data;
_refUploadFile.addEventListener(ProgressEvent.PROGRESS,
onUploadProgress);
_refUploadFile.addEventListener(Event.COMPLETE,
onUploadComplete);
_refUploadFile.addEventListener(IOErrorEvent.IO_ERROR,
onUploadIoError);
_refUploadFile.addEventListener(SecurityErrorEvent.SECURITY_ERROR,
onUploadSecurityError);
_refUploadFile.upload(request, "file", false);
I just don't know how to put it all together in Coldfusion.

try this...
http://cf-creations.co.uk/blog/index.cfm/2008/9/20/Flex--File-Upload-Form--Part-One--Build ing-The-Initial-Form

Stored procedure and coldfusion.

Hi all,
My query is related with Oracle and coldfusion. I have got to write a stored procedure for updating a table. In this I have to raise an exception if the field i give for does not exist. Can anyone give an example code for this? I also want to know how it is called in a cfm page.
Following is the stored procedure i have written
create or replace package group_pack
as
procedure group_update
pt_group_id in group.group_id%type,
pt_group_name in group.group_name%type
end;
create or replace package body group_pack
as
procedure group_update
pt_group_id in group.group_id%type,
pt_group_name in group.group_name%type
as
begin
update group
set group_id = pt_group_id,
group_name = pt_group_name
where group_id = pt_group_id;
exception
when no_data_found then (what to code)
end;
end;
In this in the (what to code) part i tried returning zero...but then procedures do not return values. Then I tried to RAISE exception, which also showed error.
Also in the cfm page what should be done with the <cfstoredproc> </cfstoredproc>tags. How should it be reflected.....
Please do give a solution to my problem.....
Thanking in advance....
Regards,
Aswathy.

Hi Aswathy,
Can you please tell, what error it gave when you had written RAISE command? I think, this is a better choice if you do not want to do anything else like inserting a row with the missing value.
regards,
Archana
http://justoracle.blogspot.com/

SQL Server 2005 and ColdFusion 7

Hi all,
I am using SQL Server 2005 and ColdFusion 7 (standalone) on
XP 64 Bit. I was using the exact setup a couple of weeks ago, but
had to reinstall my O/S due to hardware problems so am back to the
beginning. I remember having a nightmare setting datasources up in
the past, but did manage to find a solution.
I have tried the following:
SQL has TCP/IP Enabled
SQL is set to Mixed Authentication
SQL has a login set to the same as my Windows Username and
password
My database has a user (dbo) by the same name as the login
set in SQL
When I add a datasource in the administrator I enter the
windows username and password (I have tried without either as
well), the server name as localhost and the port as the default
1433.
I always get the following error:
Connection verification failed for data source: DATABASENAME
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket.
Connection refused: connect
Can someone offer any advice? This is driving me proper nuts.
TIA,
Paul

when i did it, i had to update my jdbc driver
http://msdn.microsoft.com/data/ref/jdbc/

Question about the Apache plug-in and WL server

We have a bunch of Weblogic app-servers, and I want to set up Apache servers to
front-end them. Here is what I'd like to do:
(1) Load balancer forwards requests to one of Apache servers
(2) Apache serves the static content (html,gif,css etc.)
(3) Apache servers forward the request to one of the alive Weblogic servers, with
requests for the same Weblogic session should preferably stay with the same Weblogic
server.
The catch is that we are not using Weblogic clustering - we have our own application-specific
light-weight clustering (virtually no replication of dynamic state). All I want
is that the Apache plug-ins keep forwarding the packets to the same Weblogic server
for a session (unless the server dies), and that thsi property hold even if multiple
client requests (for the same session) are rotated across multiple Apache servers.
The first is really important, the second just nice-to-have (I can setup load-balancer
with sticky sessions if needed).
The Apache plug-in documentation seems to suggest that we must use Weblogic clustering
for us to be able to specify multiple Weblogic servers in the plug-in config file,
but is that really required?
Second, does the session cookie uniquely identify the Weblogic server or does
the Apache plug-in keep the mapping between the cookie and the server? Also, does
this answer depend on whether we use Weblogic clustering or not?
The answer depends on the protocol between the Apache plug-in and the Weblogic
server. Is it documented? Available under NDA?
Your help will be really appreciated!!
thanks
-amit

is that the Apache plug-ins keep forwarding the packets to the same Weblogic
server
for a session (unless the server dies), If the session id is found in the cookie, request or postdata (in that order),
the plugin will preserve the sticky session.
and that thsi property hold even
if multiple
client requests (for the same session) are rotated across multiple Apache
servers.The rules apply to all apache instances as the single instance.
BTW, the preferred server from the session has to be in the serverList(you defined
in the httpd.conf). You are not using clusters in the backend hence the server
list will not be updated
dynamically. The plugin will not know the changes in the backend without modifying
the httpd.conf and restarted.
The first is really important, the second just nice-to-have (I can setup
load-balancer
with sticky sessions if needed).
The Apache plug-in documentation seems to suggest that we must use Weblogic
clustering
for us to be able to specify multiple Weblogic servers in the plug-in
config file,
but is that really required?
It's a recommended configuration, but not mandatory.
Second, does the session cookie uniquely identify the Weblogic server
or does
the Apache plug-in keep the mapping between the cookie and the server?The server info is in the cookie for the same client although
the plugin also maintains a list of servers.
Also, does
this answer depend on whether we use Weblogic clustering or not?
No.
The answer depends on the protocol between the Apache plug-in and the
Weblogic
server. Is it documented? Available under NDA?
Your help will be really appreciated!!
We only support http and https(60sp1 or later).

For David Powers - Apache 2.2 and php 5.2. Virtual hosts

Hi David,
I have updated to the latest Apache and PHP
Apache 2.2 and php 5.2. Must easier instal,
But now I'm setting up Virtual hosts to make it easier to use
php
includes and DW templates.
I have followed instructions on page 86 of above book, but I
can't
find the section NameVirtual Host on Apache's httpd.conf and
it is
much shorter than 950 lines.
Malcolm N_
~Malcolm N....
~

On Sun, 21 Jan 2007 11:49:47 -0000, "Dave Buchholz"
<[email protected]> wrote:
>Malcolm,
>
>a different David I know but you will find an updated
tutorial on the "real"
>David's site here
http://foundationphp.com/tutorials/apache22_vhosts.php
Many thanks David - I had found his revised tutorial on
installing
Apache - but I must have missed the bit on virtual hosts.
That's great - I've not got all my sites working as virtual
hosts (:-)
Now to play with relative links / links to php include files
in
templates. !!!
I'm going to try to get headers, footers and nav panels etc
out of the
main template(s), and do what Murray has been nagging
everyone to do
for ages.....
I wasn't getting on well with that with before !! - standby
for more
questions.
I had to read two of David's excellent books about three
times - eh !.
Malcolm
~Malcolm N....
~

Apache 2.0 and PHP 5

Hello,
I have a Customer who wants to develop an application with IAS 9.0.4. There should be an Integration of PHP 5 as Apache module mod_php (using the following PEAR packages)
- DB
- DB_LDAP
- Auth
- Config
- File
- Log
- XML_Serializer
and additional Apache modules mod_ssl and mod_dav should also be used.
Has somebody done something similar.
I know that this is not official supported, but I just wan t to know if there are technical traps or bugs which could be show stopper.
thanks in advance for your help
Martin

Recent traffic on php.internals makes me think the note in
http://www.php.net/manual/en/install.apache2.php
"Do not use Apache 2.0 and PHP in a production environment
neither on Unix nor on Windows." is still valid.
-- CJ

Apache reverse proxy and SSL termination

Hi Guru's
Can anyone tell me, how to do SSL termination at apache reverse proxy. I am using apache reverse proxy for accesing portal from internet. Apache is configured for SSL and portal is NON SSL.
I am using header variable login module in portal. i wanted to terminate SSL at apache reverse proxy and then all traffic after that should be clear text.
should i maitain any property. is there any documentation for it.
Please help me
Tom

The majority of the work here is around configuring your Web Dispatcher and Apache Reverse proxy. The work on the portal is straight forward enabling of SSL.
You can follow http://help.sap.com/saphelp_nw2004s/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm for setting this up.
what level I need to configure SSL and how do I proceed in both scenarios?
Your question itself says where you need SSL. SSL is required where ever you need HTTPS communication.
how do I proceed in both scenarios?
From a portal perspective, the configuration should remain the same.
Do I have to install SSL at portal, web dispatcher or at Apache level?
SSL needs to be configured at all the 3 levels if you are looking at end to end SSL implementation.
See the following for possible SSL implementation options:
http://help.sap.com/saphelp_nw04/helpdata/en/d8/a922d7f45f11d5996e00508b5d5211/frameset.htm
https://cw.sdn.sap.com/cw/docs/DOC-115509
Will SSL termination work for scenario 2?
Yes this should work - see http://help.sap.com/saphelp_nw2004s/helpdata/en/36/fd39eacf4cde4a8fe32d7f29b3db16/frameset.htm
However in case of SSL Termination, the request to your portal from the web dispatcher will be sent as HTTP.
I would recommend you to take a step by step (backward approach).
First, enable SSL on your portal and make sure it works - going directly to the server.
Then, you can introduce the Web Dispatcher - and test if every thing works going through the web dispatcher.
Finally - you can test the end to end flow - with your Reverse proxy involved.
- Shanti

How to integrate Apache Web Server and Apache Tomcat 4.0 ?

<pre>
Hi All,
Can anyone give me a detailed description(or url that tells so) of how to install the Apache Web Server, Apache Tomcat Server4.0 and Integrate both of them.
Still now I am using Apache Tomcat 4.0 as a standalone application and now I want to learn how to install,use Apache Web Server and integrate this with Apache Tomcat.
Please point me to exact location,url to download the recent Apache Web Server and,
Can I use my existing Standalone Apache Tomcat 4.0 to integrate this with Apache Web Server that I am going to download.
A detailed explanation of how to integrate both is very helpful.
Thanks in advance.
<pre>

The way to integrate Apache Web Server & Apache is very easy. The first step is download the library to connect both servers. This library can be download from http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0/bin/webapp-module-1.0-tc40-windows.zip.
Copy the files to APACHE_HOME\modules and open httpd.conf to change any lines:
You find the section "LoadModule" and you add the next lines:
LoadModule webapp_module modules/mod_webapp.so
AddModule mod_webapp.c
And the end of the file you must add these lines:
WebAppConnection conexion warp localhost:8008
WebAppDeploy examples conexion /examples
The first parameter -2nd line- (examples) is the URL name application, the second is the connection's name and the last parameter is the application's name. This name is the same which in servlet.xml.
At last you can add one more lines to check the module's configuration:
WebAppInfo /webapp-info
If you visit http://<yoor_host>/webapp-info you can see the configuration.

Anyone know how to gernerate CRUD applications with flex and coldfusion?

Anyone know how to gernerate CRUD applications with flex and
coldfusion? I am working with a remote coldsfusion installation
with MS SQL and I don't have RDS.

You might investigate "squidhead". It is CF based. I'm not
sure if it has any Flex related features.
http://squidhead.riaforge.org/

Adobe Actionscript 1.0 and Coldfusion 8

Hi ,
We are using actionscript 1.0 in our application and as the middle tier we are using Coldfusion MX 7. Now our web applications are working fine.If we upgrade MX 7 to Coldfusion 8 will this integration work fine. Is there any known issues integrating actionscript 1.0 and coldfusion 8.Please help

AS1 !?! So I suppose that you're doing SOAP calls or XML over HTTP ? In that case, there's no compatibility issue between 7 and 8: "ColdFusion MX (6.0, 6.1, and 7) applications should seamlessly migrate to ColdFusion 8."
Hope it helps,
Cyril

New Coldfusion Server Setup in Flashbuilder and Coldfusion Builder not working

I have not found the combination for adding a new Coldfusion Server in Flash Builder 4.7 or Coldfusion Builder 2.01 with Coldfusion 10. I am running windows 7 64bit. on IIS 7. Coldfusion 10 is running fine.
All was well with Coldfusion 9 Flash Builder 4.6 and Coldfusion Builder 2.0.
Local Server Settings for CF9 were
Server Home C:\Coldfusion9
Document Root C:\inetpub\wwwroot
Version: 9.0.x
Now as soon as I put in C:\Coldfusion10 or C:\Coldfusion10\cfusion I get an error "Server home is not valid".
Any hints on getting this going.

Hi Jeff,
Can you let us know the directory location for wwwroot on your system.
jeffcg2 wrote:
That does not work. As soon as I put C:\ColdFusion10\cfusion in the Server Home I get the error Server Home Invalid. I have uninstalled Coldfusion 10 and re-installed added the latest updates. Coldfusion 10 is working fine running on IIS 7.
Not necessarily. As soon as you select the "cfusion" location, it would automatically pick the wwwroot location.
jeffcg2 wrote:
With Coldfusion 10 , since you have C:\ColdFusion10\cfusion\wwwroot. as the Document root will this only work if you install the included web server?
Regards,
Anit Kumar

Apache 2.2 and ColdFusion MX

Similar Messages

Maybe you are looking for