Apex Advisor does not like comments within interactive reports

If I have some comments within interactive reports,
example:
/* comment */
select * from dual
apex advisor shows me an error message like this:
Compilation error - ORA-06550: line 3, column 1:
PLS-00428: an INTO clause is expected in this SELECT statement
Does anyone has the same problem?
Thank you!

Hi "user1139516",
the problem is that if the first word isn't "SELECT" or "WITH" the statement it's not detected as a SQL statement and we fallback to try to handle it as an anonymous PL/SQL block.
For now as a workaround, but your comments after the SELECT keyword like
select /* comment */
from dualWe try to change that behavior in a future version of APEX.
Thanks
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Similar Messages

APEX Advisor does not like Plugin Process

Hello Everyone/Patrick :-)
I have run into the following issue with the APEX advisor. It has arisen since I have installed and utilised a PROCESS PLUGIN.
Irrespective of which checkboxes I select in the "APEX Advisor Checks to Perform" section, I receive the following error message...
ORA-20999: ORA-20999: Unknown type! PROCESS_SOURCE-Close DHTML Dialog ORA-06512: at "APEX_040000.WWV_FLOW_ADVISOR", line 1373 ORA-06512: at line 217 ORA-06512: at "APEX_040000.WWV_FLOW_ADVISOR", line 3801 ORA-06512: at line 28As the plugin is working exactly as I want it to, is it possible that the Advisor can skip the validation/evaluation of plugin processes?
As it stands, I am unable to utilise the great functionality of the Advisor because I have used a plugin process.
Any help/thoughts/assistance gratefully received.
Many thanks
Kind regards
Simon Gadd

Hi Simon,
I have fixed the bug and it will be included in 4.0.2.
But unfortunately there is no general workaround available. Only to not call the Advisor for pages where you use a process type plug-in. For example you could use the "Pages I last edited within the last 7 days" or "All pages edited within the last 7 days" list in the "Check Page(s)" section to restrict your search.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Export to jpg does not contain comments (or I can't see them)

Hi,
I've run into a problem that I've not been able to fix. I'm hoping the collective wisdom here can help me.
My problem is that when I export a pfd (from an imported jpg) back to a jpg file, the newly created jpg does not contain the comments/markups I've made. One day I could do this, the next day I couldn't. It's possible that I somehow changed preferences or something. I'm not sure.
While trying to figure this out I discovered that if I export that same jpg file (containing comments) with a watermark, then all the comments are visible. Watermark off, exported jpg does not contain comments.
To solve the problem I have:
I have tried to change all preferences back to default settings. (not sure if I found them)
I have uninstalled/reinstalled Acrobat without success.
I have also deleted the registry file without success.
I read that one way to solve the problem is to print a file with the comments to pdf, then export that pdf file back to jpg. That works, but I'd like to avoid the extra step.
Any thoughts or suggestions?
Thanking you in advance.
Robert

Have you setup home-sharing in iTunes and Apple TV?
Did you setup access to photos in iTunes (file - home-sharing - choose photos to share) ?
Is the computer on and running iTunes ?
Make sure content is compatible with ATV as well

4EA2 the Detail display for views does not show comments for the view

I am running in an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production environment.
The Detail tab for a View does not show comments added for the view. I would like to request that the Detail tab be modified to display any comments added for the view.
This is important for me because I want to use the Generate DB doc function (from the right-click menu linked to schemas), to generate documentation, and that function uses the same format as the Detail Tab. The View Comments are important for my users.

Hi Penny Halsall,
Kindly check if that Facebook page can be followed by the public. If the profile can't be followed by the public, then the widget won't work as accepted.
Facebook provides instructions to check/do this here: https://www.facebook.com/help/201148673283205
OR
You can generate the associated HTML code from this page :
https://developers.facebook.com/docs/plugins/
Regards
Sonam

"Execution period does not lie completely within the shift "

Dear Fds,
While operation confirmation when i insert shift, i m getting the warning msg "Execution period does not lie completely within the shift " how to remove this?
Thanks in advance
Nishj

Hi Nishj,
My suggestion is in OPK4, second tab 'Individual entry general', in shift proposal select current shift, so that the system will automatically take the shift and no need of manually giving that. In this case i think you will not face the error.
Have you have already decided to give the shift manually, please check and revert back.
As per my knowledge in operation wise confirmation shift will not be displayed in standard SAP. Please let me know if you are using any exit.
Regards,
Krishna Chandra

I have ripped cds on to windows and i am trying to transfer them over to itunes except it does not like wma files is there anything i can do

i have ripped cds on to windows media player but i am trying to transfer them over to itunes except it does not like wma files is there anything i can do

It should work... when I got my first iPod I transferred my entire library over and it was all .wma files. What specific steps have you tried?

Windows 7 does not like my Audigy Card at all

Hey guys,
Got too excited and went out and bought Windows 7 Ultimate x64 - fantastic. Problem is, I have no sound - my Asus Rampage Formula motherboard has no onboard sound as it comes with a seperate sound card which won't work and neither will the cheapy Audigy standard one I bought today to try...
7 automatically installs some drivers when it detects I have a sound card installed and sticks it in the Device Manager under 'System Devices' and calls it a 'High Definition Audio Controller'
Now I found the new Win 7 drivers on here and downloaded in the hope of installing and overwriting this 'Hi Def Audio Controller' but when i'm in setup I get the error message "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup Program. Setup will exit" which is completely baffling me as Win7 can detect and install this 'audio controller' - when I hover over the volume icon in the taskbar (which incidentally has a red cross over it) it says 'No audio output is installed"
I'm probably going wrong somewhere, but I don't know if its Win7 or these "Windows 7" drivers don't actually work?
Please can anyone help?!!

Re: Windows 7 does not like my Audigy Card at all^ Perhaps you can try this:
<a rel="nofollow" href="http://support.creative.com/downloads/download.aspx?nDownloadId=0960"]http://support.creative.com/downloads/download.aspx?nDownloadId=0960[/url]
Yes I know that that is a standard driver from Creative. But try to download the driver. Then right click it, and extract it. You can extract it like this if you have WINRAR, WINACE, or WINZIP on your system. Even the free 7-zip will work great.
Then go to device manager, and then to your unknown device, and then update driver, and then choose "have disk....." and browse to the folder where you unzipped the driver. Then install the driver, allowing it to copy the files over to your system. Reboot. Sound may still not be working at this point. Then try windows update or the Daniel K. pack again. Using this method may seem weird but I am trying to "trick" your system into picking up your Audigy.
This worked for me before with my x-fi Titanim and my Extreme gamer when I switched to Vista 64.

Bitcoin-QT does not like UTC

Hey Archers! This is my first post on here, but I've been using Arch on and off since 2011... just goes to show how good the wiki is lol
Anyway, I'm dual booting Windows 8 (work reasons, unfortunatley) and Arch, so as the wiki suggested, I set both operating systems to use UTC. I originally thought it worked like a charm, but after firing up my Bitcoin wallet (in Arch) I soon discovered it isn't syncing with the network in UTC. If I switch back to America/New_York, everything still works great again. How would I make the bitcoin-qt client work with UTC?
Here is what I did to set UTC:
ln -sf /usr/share/zoneinfo/UTC /etc/localtime
And then I tried reindexing the blocks like so:
bitcoin-qt -reindex
But I haven't had any luck

That's odd, we must be reading different wiki pages then, on both the Installation Guide and Time wiki pages, it says the timezone can be set by making a symlink at /etc/localtime that points to the desired zone. Regardless, I checked the hardware clock, and it seems to be set correctly...
timedatectl status | grep local
outputs
RTC in local TZ: no
And this
hwclock
outputs
Fri 11 Oct 2013 04:41:05 AM UTC -0.797325 seconds
So it is definately set in UTC at the correct time. I'm thinking Bitcoin-QT does not like UTC for some reason. The time itself seems to be fine because Windows and Arch both have the same time after either windows or Arch syncs time over the internet.
Thanks for the help cfr, much appreciated.

PCI-GPIB does not like returning from computer power-save mode. I need to restart the application. Uggh! Customer not happy.

It seems volatile memory is lost on the PCI GPIB Card. When the system returns from power-save, I cannot get to my GPIB instruments. I have to close the application and restart it. I've tried unregistering and reregistering the gpib globals and resetting the device interfaces (reissuing the ibdev command) without luck. I am using Visual Basic 6, but I also get the Measurement and Automation Explorer to fail in the same way, so I don't think it is my development environment.

On Sat, 15 May 2004 20:23:58 -0500 (CDT), SQP Products wrote:
>PCI-GPIB does not like returning from computer power-save mode. I
>need to restart the application. Uggh! Customer not happy.
>
>It seems volatile memory is lost on the PCI GPIB Card. When the
>system returns from power-save, I cannot get to my GPIB instruments.
>I have to close the application and restart it. I've tried
>unregistering and reregistering the gpib globals and resetting the
>device interfaces (reissuing the ibdev command) without luck. I am
>using Visual Basic 6, but I also get the Measurement and Automation
>Explorer to fail in the same way, so I don't think it is my
>development environment.
Can you change your power save settings? What operating system
are you running?
Also, some BIOS's have options for power save. For example, recent
IBM's can be set to maintain power to all peripherals, or only to main
memory. Of course, you would want it to maintain power.
I suspect the GPIB board and its driver are completely unable to
handle power save operation. It probably was never considered while
it was being designed.
Aidan Grey

MY WIRELESS ROUTER DOES NOT LIKE WINDOWS 7

OK FIRST I'M NOT YELLING. CAPS ARE MUCH EASIER FOR ME TO SEE AS I HAVE MS. ANYWAY I AM A NOVICE USUER WHEN IT COMES TO ROUTERS BUT MY ROUTER Wireless-N Broadband Router (WRT300N) DOES NOT LIKE MY NETBOOK WHICH HAS WINDOWS 7 HOME PREMIUM. DOES ANYONE KNOW HOW I CAN EASILY FIX THIS.
THANKS IN ADVANCE,

Are you able to see the wireless network name on your computer ?
If yes, then what's the error message are you getting while connecting to the network ?

Admin_client.jar does not like -deploymentPlan switch

I 'm trying to deploy an app via admin client using the following command line:
java -jar $ORACLE_HOME/j2ee/home/admin_client.jar deployer:oc4j:opmn://$2.llnl.gov:6003/OpticsLoop oc4jadmin -deploy -file app.war -deploymentName $app -deploymentPlan plan.dat
It does not like the -deploymentPlan switch. Error is:
Admin command usage error: Unknown -deploy switch: plan.dat
It will deploy other apps that don't use the -deploymentPlan. With this app I need the plan so I can disable apache commons logging library that conflicts with the log4j packaged with my app.
JDK5 and Oc4J 10.1.3.3. Problem seen on Windows as well as on Linux.

hi vamsee
I was able to deploy an application, using the "-deploymentPlan" switch, like this:
D:\oracle\oc4j_101330>java -jar j2ee/home/admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin welcome -deploy -file d:\temp\DPThread638837App.ear
-deploymentName DPThread638837App -deploymentPlan d:\temp\DPThread638837App-localhost-plan.datIf I change the path for the deployment plan to something that does not exist, I get the message "... Unable to find deployment plan ..." :
D:\oracle\oc4j_101330>java -jar j2ee/home/admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin welcome -deploy -file d:\temp\DPThread638837App.ear
-deploymentName DPThread638837App -deploymentPlan d:\temp\unknown.dat
Deploy error: Deploy error: Unable to find deployment plan d:\temp\unknown.dat.I don't know why it doesn't work for you.
success
Jan Vervecken

JBuilder does not like Canvas3D

The JBuilder Enterprise GUI Swing design does not like JBuilder it seems.
If I take my Canvas3D out everything works fine, I can edit the GUI and such...
If I use Canvas3D inside my main Frame the Designer closes JBuilder. No message or anything, just totally exits out.
Anyone suggestions?

Canvas3D is not swing component. So do not use it in Swing GUI Designer.

Itunes does not like my address

Itune does not like my mailing address

Well this is normal. First you have to remove your email from being a recovery ID.

My Fascinate does not like Android 2.2 Froyo

Ok, just got the Android 2.2 Froyo update today. My Fascinate does not like it. Nothing works the way it used to, and the "pretty" they put on it does not make up for the pain in the **bleep** it has become. Try to delete single or multiple image and it locks up, takes forever to open some apps. Media scanner will start and will not stop. Shutting down and restarting does not help. Is there any was to go back to the old software that works? Thanks for any help or info. DLS

darklightusn wrote:
Ok, just got the Android 2.2 Froyo update today. My Fascinate does not like it. Nothing works the way it used to, and the "pretty" they put on it does not make up for the pain in the **bleep** it has become. Try to delete single or multiple image and it locks up, takes forever to open some apps. Media scanner will start and will not stop. Shutting down and restarting does not help. Is there any was to go back to the old software that works? Thanks for any help or info. DLS
I first would try a factory reset and then still unhappy with the results, you have a couple of choices, ask for a replacement or revert to version 2.1, and yes, you can revert but only if you go to Android Central Fascinate forums

HT201210 feeling a little lost. i was updating to new phone software now phone has gone back to new mode. it recognises my phone but wont allow me to ststem backup from itunes as it does not like the passwords i use as it says system restore already done

having problems with passwords since i upgraded software on itunes as phone gone back to configure mode but wont allow to restore from back up in itunes as it does not like passwords i use. any ideas to solve?

unhappy@apple wrote:
but t say's that it will delet all the my stuff i have on their, can i get some other way?
Not if it is in Recovery mode.
-> http://support.apple.com/kb/HT1808
You can restore from backup.
-> http://support.apple.com/kb/HT1766

Apex Advisor does not like comments within interactive reports

Similar Messages

Maybe you are looking for