APEX Advisor does not like Plugin Process

Hello Everyone/Patrick :-)
I have run into the following issue with the APEX advisor. It has arisen since I have installed and utilised a PROCESS PLUGIN.
Irrespective of which checkboxes I select in the "APEX Advisor Checks to Perform" section, I receive the following error message...
ORA-20999: ORA-20999: Unknown type! PROCESS_SOURCE-Close DHTML Dialog ORA-06512: at "APEX_040000.WWV_FLOW_ADVISOR", line 1373 ORA-06512: at line 217 ORA-06512: at "APEX_040000.WWV_FLOW_ADVISOR", line 3801 ORA-06512: at line 28As the plugin is working exactly as I want it to, is it possible that the Advisor can skip the validation/evaluation of plugin processes?
As it stands, I am unable to utilise the great functionality of the Advisor because I have used a plugin process.
Any help/thoughts/assistance gratefully received.
Many thanks
Kind regards
Simon Gadd

Hi Simon,
I have fixed the bug and it will be included in 4.0.2.
But unfortunately there is no general workaround available. Only to not call the Advisor for pages where you use a process type plug-in. For example you could use the "Pages I last edited within the last 7 days" or "All pages edited within the last 7 days" list in the "Check Page(s)" section to restrict your search.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Similar Messages

  • Apex Advisor does not like comments within interactive reports

    If I have some comments within interactive reports,
    example:
    /* comment */
    select * from dual
    apex advisor shows me an error message like this:
    Compilation error - ORA-06550: line 3, column 1:
    PLS-00428: an INTO clause is expected in this SELECT statement
    Does anyone has the same problem?
    Thank you!

    Hi "user1139516",
    the problem is that if the first word isn't "SELECT" or "WITH" the statement it's not detected as a SQL statement and we fallback to try to handle it as an anonymous PL/SQL block.
    For now as a workaround, but your comments after the SELECT keyword like
    select /* comment */
      from dualWe try to change that behavior in a future version of APEX.
    Thanks
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • Operation does not fetch in process order

    hi PP-Pi gru,
    when i am creating process order from planed order , operation ( master recipe) does not fetch in process order..only take default operation 10, kindly suggest me how all operation will fetch in process order
    another mater is when assign production profile  in  t- code CORU show the error massage  " production scheduling profile for plant ALIV,order type does not exist"...but we have used stander order type PI01..kindly suggest me
    Rogers
    Aqueel

    Hi,
    Check In master Recipe ,in the PI Tab,There must be some PI category is assigned and in that PI Category,this PI Charactiristic has been assigned.
    First goto that Phase of the Master Recipe and then goto PI tab and then find the PI category.
    You need to define production scheduling profile for your plant in OPKP which is assign to order type dependent parameter  COR4 In planning screen. Please check. Also check the work scheduling view of material master.
    Regards,
    R.Brahmankar

  • I have ripped cds on to windows and i am trying to transfer them over to itunes except it does not like wma files is there anything i can do

    i have ripped cds on to windows media player but i am trying to transfer them over to itunes except it does not like wma files is there anything i can do

    It should work... when I got my first iPod I transferred my entire library over and it was all .wma files. What specific steps have you tried?

  • Windows 7 does not like my Audigy Card at all

    Hey guys,
    Got too excited and went out and bought Windows 7 Ultimate x64 - fantastic. Problem is, I have no sound - my Asus Rampage Formula motherboard has no onboard sound as it comes with a seperate sound card which won't work and neither will the cheapy Audigy standard one I bought today to try...
    7 automatically installs some drivers when it detects I have a sound card installed and sticks it in the Device Manager under 'System Devices' and calls it a 'High Definition Audio Controller'
    Now I found the new Win 7 drivers on here and downloaded in the hope of installing and overwriting this 'Hi Def Audio Controller' but when i'm in setup I get the error message "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup Program. Setup will exit" which is completely baffling me as Win7 can detect and install this 'audio controller' - when I hover over the volume icon in the taskbar (which incidentally has a red cross over it) it says 'No audio output is installed"
    I'm probably going wrong somewhere, but I don't know if its Win7 or these "Windows 7" drivers don't actually work?
    Please can anyone help?!!

    Re: Windows 7 does not like my Audigy Card at all^ Perhaps you can try this:
    <a rel="nofollow" href="http://support.creative.com/downloads/download.aspx?nDownloadId=0960"]http://support.creative.com/downloads/download.aspx?nDownloadId=0960[/url]
    Yes I know that that is a standard driver from Creative. But try to download the driver. Then right click it, and extract it. You can extract it like this if you have WINRAR, WINACE, or WINZIP on your system. Even the free 7-zip will work great.
    Then go to device manager, and then to your unknown device, and then update driver, and then choose "have disk....." and browse to the folder where you unzipped the driver. Then install the driver, allowing it to copy the files over to your system. Reboot. Sound may still not be working at this point. Then try windows update or the Daniel K. pack again. Using this method may seem weird but I am trying to "trick" your system into picking up your Audigy.
    This worked for me before with my x-fi Titanim and my Extreme gamer when I switched to Vista 64.

  • Elements 9 does not accept or process RAW photo images taken with a Nikon D7000.

    Adobe elements 9 does not accept or process RAW photo images taken with a Nikon D7000. I called support for a download patch and they said I had to purchase a support package or essentially purchase Elements 10. I can't believe that Adobe would not have a download patch for this problem as my elements 9 is not very old. When I try to do the updates Adobe says the serial number of the elements 9 is not accepted for download or support even though I purchased it and registered it with Adobe.
    Is there any solution to this?
    Thanks.

    Thank you but still having a problem. I go to the edit menu>>help>>update>>check for updates and an update to 9.03 comes up as the only update, no camera raw update. It starts to download and then stops and says to close organizer and/or editor then starts back up and stops again saying "error installing this update. Close and contact customer support". When I called customer support earlier that's when they said they don't support 9 only v. 10 and did I want to buy support or a new program v10 to get camera raw processing for the Nikon D7000 RAW. Apparently I'm doing something wrong in the update procedure but don't know what. The camera raw version is 6.5 in my elements and understand that camera raw v. 6.7 is the update to process the images. Any ideas? If I uninstall and reinstall does the serial number still work on the reinstall?
    Thanks for help.

  • Is there a version of Firefox still available that does not have plugin-container.exe included?

    I have faithfully updated Firefox on my Windows XP system and now use Firefox/3.6.16. I also run Photoshop Elements 6.0, which requires quite a bit of memory. It is currently getting slowed down because plugin-container.exe is consuming anywhere from 25% to 50% of my memory. If I use Task Mgr to shut down this task, things are much better. Is there a downloadable version of Firefox that does not include plugin-container.exe, and if so, can I replace my current version with that one?

    To LOVEfx4 and Mozilla community. Have Windows XP and had
    Firefox 3.16.6 Since installing Firefox 4 I have had nothing but slowdowns whenever I try to download any sites with Java. Any explanations why? Sorry, I cannot find any threads for Firefox 4.

  • Bitcoin-QT does not like UTC

    Hey Archers! This is my first post on here, but I've been using Arch on and off since 2011... just goes to show how good the wiki is lol
    Anyway, I'm dual booting Windows 8 (work reasons, unfortunatley) and Arch, so as the wiki suggested, I set both operating systems to use UTC. I originally thought it worked like a charm, but after firing up my Bitcoin wallet (in Arch) I soon discovered it isn't syncing with the network in UTC. If I switch back to America/New_York, everything still works great again. How would I make the bitcoin-qt client work with UTC?
    Here is what I did to set UTC:
    ln -sf /usr/share/zoneinfo/UTC /etc/localtime
    And then I tried reindexing the blocks like so:
    bitcoin-qt -reindex
    But I haven't had any luck

    That's odd, we must be reading different wiki pages then, on both the Installation Guide and Time wiki pages, it says the timezone can be set by making a symlink at /etc/localtime that points to the desired zone. Regardless, I checked the hardware clock, and it seems to be set correctly...
    timedatectl status | grep local
    outputs
    RTC in local TZ: no
    And this
    hwclock
    outputs
    Fri 11 Oct 2013 04:41:05 AM UTC -0.797325 seconds
    So it is definately set in UTC at the correct time. I'm thinking Bitcoin-QT does not like UTC for some reason. The time itself seems to be fine because Windows and Arch both have the same time after either windows or Arch syncs time over the internet.
    Thanks for the help cfr, much appreciated.

  • PCI-GPIB does not like returning from computer power-save mode. I need to restart the application. Uggh! Customer not happy.

    It seems volatile memory is lost on the PCI GPIB Card. When the system returns from power-save, I cannot get to my GPIB instruments. I have to close the application and restart it. I've tried unregistering and reregistering the gpib globals and resetting the device interfaces (reissuing the ibdev command) without luck. I am using Visual Basic 6, but I also get the Measurement and Automation Explorer to fail in the same way, so I don't think it is my development environment.

    On Sat, 15 May 2004 20:23:58 -0500 (CDT), SQP Products wrote:
    >PCI-GPIB does not like returning from computer power-save mode. I
    >need to restart the application. Uggh! Customer not happy.
    >
    >It seems volatile memory is lost on the PCI GPIB Card. When the
    >system returns from power-save, I cannot get to my GPIB instruments.
    >I have to close the application and restart it. I've tried
    >unregistering and reregistering the gpib globals and resetting the
    >device interfaces (reissuing the ibdev command) without luck. I am
    >using Visual Basic 6, but I also get the Measurement and Automation
    >Explorer to fail in the same way, so I don't think it is my
    >development environment.
    Can you change your power save settings? What operating system
    are you running?
    Also, some BIOS's have options for power save. For example, recent
    IBM's can be set to maintain power to all peripherals, or only to main
    memory. Of course, you would want it to maintain power.
    I suspect the GPIB board and its driver are completely unable to
    handle power save operation. It probably was never considered while
    it was being designed.
    Aidan Grey

  • MY WIRELESS ROUTER DOES NOT LIKE WINDOWS 7

    OK FIRST I'M NOT YELLING. CAPS ARE MUCH EASIER FOR ME TO SEE AS I HAVE MS. ANYWAY I AM A NOVICE USUER WHEN IT COMES TO ROUTERS BUT MY ROUTER  Wireless-N Broadband Router (WRT300N) DOES NOT LIKE MY NETBOOK WHICH HAS WINDOWS 7 HOME PREMIUM. DOES ANYONE KNOW HOW I CAN EASILY FIX THIS.
    THANKS IN ADVANCE,

    Are you able to see the wireless network name on your computer ?
    If yes, then what's the error message are you getting while connecting to the network ?

  • Admin_client.jar does not like -deploymentPlan switch

    I 'm trying to deploy an app via admin client using the following command line:
    java -jar $ORACLE_HOME/j2ee/home/admin_client.jar deployer:oc4j:opmn://$2.llnl.gov:6003/OpticsLoop oc4jadmin -deploy -file app.war -deploymentName $app -deploymentPlan plan.dat
    It does not like the -deploymentPlan switch. Error is:
    Admin command usage error: Unknown -deploy switch: plan.dat
    It will deploy other apps that don't use the -deploymentPlan. With this app I need the plan so I can disable apache commons logging library that conflicts with the log4j packaged with my app.
    JDK5 and Oc4J 10.1.3.3. Problem seen on Windows as well as on Linux.

    hi vamsee
    I was able to deploy an application, using the "-deploymentPlan" switch, like this:
    D:\oracle\oc4j_101330>java -jar j2ee/home/admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin welcome -deploy -file d:\temp\DPThread638837App.ear
    -deploymentName DPThread638837App -deploymentPlan d:\temp\DPThread638837App-localhost-plan.datIf I change the path for the deployment plan to something that does not exist, I get the message "... Unable to find deployment plan ..." :
    D:\oracle\oc4j_101330>java -jar j2ee/home/admin_client.jar deployer:oc4j:localhost:23791 oc4jadmin welcome -deploy -file d:\temp\DPThread638837App.ear
    -deploymentName DPThread638837App -deploymentPlan d:\temp\unknown.dat
    Deploy error: Deploy error: Unable to find deployment plan d:\temp\unknown.dat.I don't know why it doesn't work for you.
    success
    Jan Vervecken

  • JBuilder does not like Canvas3D

    The JBuilder Enterprise GUI Swing design does not like JBuilder it seems.
    If I take my Canvas3D out everything works fine, I can edit the GUI and such...
    If I use Canvas3D inside my main Frame the Designer closes JBuilder. No message or anything, just totally exits out.
    Anyone suggestions?

    Canvas3D is not swing component. So do not use it in Swing GUI Designer.

  • Itunes does not like my address

    Itune does not like my mailing address

    Well this is normal. First you have to remove your email from being a recovery ID.

  • My Fascinate does not like Android 2.2 Froyo

    Ok, just got the Android 2.2 Froyo update today. My Fascinate does not like it. Nothing works the way it used to, and the "pretty" they put on it does not make up for the pain in the **bleep** it has become. Try to delete single or multiple image and it locks up, takes forever to open some apps. Media scanner will start and will not stop. Shutting down and restarting does not help. Is there any was to go back to the old software that works? Thanks for any help or info. DLS

    darklightusn wrote:
    Ok, just got the Android 2.2 Froyo update today. My Fascinate does not like it. Nothing works the way it used to, and the "pretty" they put on it does not make up for the pain in the **bleep** it has become. Try to delete single or multiple image and it locks up, takes forever to open some apps. Media scanner will start and will not stop. Shutting down and restarting does not help. Is there any was to go back to the old software that works? Thanks for any help or info. DLS
    I first would try a factory reset and then still unhappy with the results, you have a couple of choices, ask for a replacement or revert to version 2.1, and yes, you can revert but only if you go to Android Central Fascinate forums

Maybe you are looking for