Apex running with Oracle Retail Applications
Hi,
Has anyone had experiance of building Apex screens to run with the Oracle Retail Applications (ORMS, ORPM, ReIM etc) and if so the do you do authentication using mod_sql (as with EBS 11i) rather than using the Apex Listener as you would with EBS R12.1
I am assuming its possible to access the Apex screens from the Retail menu's but I have not looked into it in any dertail and just wanted to know that I am not waiting my time suggesting Apex as an extension technology around the Retail Applications.
Mark
Toon:
Check the setting of the database init parameter - 'shared_server'
From sqlplus connected as sys
show parameter shared_server
To change the value of this parameter enter the following
alter system set shared_server=5 scope=both;
Varad
Similar Messages
-
How to install apex 4 with Oracle Fusion Middleware Web Tier Utilities
Hi all,
Does any one know how to install apex 4 with Oracle Fusion Middleware Web Tier Utilities ?
I follow the instructions http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/toc.htm but there's no directory called ORACLE_HTTPSERVER_HOME\Apache and ORACLE_HTTPSERVER_HOME/ohs/modplsql/conf/dads.conf
I don't know where's dads.conf file to make change
Please hellp me on this case
Thanks & regardsA little bit odd is an understatement. The first time I found I had to download over 1Gb of stuff to run a simple web server I practically fell over! Hopefully, the Apex Listener team will update it to have backwards compatibility with mod_plsql and we can ignore trying to install Oracle Fusion Middleware Web Tier Utilities...
However, until then the TNS Names error generally means that there isn't a TNS alias set up for the database you have referenced in the mod_plsql dad. If you open up the dads.conf file you should see something like
PlsqlDatabaseConnectString localhost:1521:databasealias
If you then open a command prompt and do TNSPING databasealias you should get a response like this
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ***)))
OK (20 msec)
If you don't it means you need to add it in.
Hope this helps -
Integrating apex form with oracle portal
Afternoon friends,
I have got a senario like integrating apex form with oracle portal.I dont have any idea on oracle portals.so please let me know the basic steps on how to go ahead to integrate apex forms with oracle portal and for that what i need to have apart with my database and apex.Hello
Couldn't see my previous post... so here it is again
We have integrated Apex into Oracle Portal
Here's how we did it.
In the portal page, we have created an Element region with the following code:
<script language="Javascript">
<!--
function changeIframeHeight(){
var ifrmObj = document.getElementById('apexIframe');
if(ifrmObj) {
if(navigator.appName=='Microsoft Internet Explorer') { //IE
ifrmObj.height = ifrmObj.contentWindow.document.body.scrollHeight+20;
else {
ifrmObj.style.height = ifrmObj.contentWindow.document.body.offsetHeight+50;
//-->
</script>
<p><iframe width="100%" height="500" frameborder="0" onload="javascript: changeIframeHeight();" src="/pls/apex/f?p=115:10" marginheight="0" marginwidth="0" name="apexIframe" id="apexIframe"></iframe></p>You just have to make sure that the name and id of the iFrame and the elementId in the javascript are the same.
And change the SRC so that it point you application.
Hope that helped you.
Max -
Using XA with Oracle ERP application
Hi,
We have two Tuxedo Domains that we need to establish global transaction:
First Domain - Tuxedo 6.4 with Oracle 8.0.6 database.
Second Domain - Tuxedo 6.4 with Oracle ERP application (Oracel version 8.0.5)
A Client that calls a Tuxedo server in the first domain this service doing some work
on the database and then calls another service in the second domain (using Domain
connection).
The service in the second Domain activate a Oracle API (package) from the ERP application.
The Rollback works but we problem with the commit. We recieve the following Oracle
Error - ORA-06574: Function "VIEW_ALL" references package state can not execute remotly.
Revital Bloom
[email protected]Subbu,
As I mentioned earlier in this thread, support for Oracle RAC has been
implemented in Tuxedo 9.1 and in the Tuxedo 8.1 and Tuxedo 9.0 rolling patch
streams. There are no plans to backport this feature to Tuxedo 8.0. If you
plan to use RAC transactionally and if it is possible for multiple services
that could be located on different RAC instances to be accessed in a single
transaction (which will be true for most applications), then you should
upgrade to a version of Tuxedo with support for Oracle RAC. The
documentation at http://e-docs.bea.com/tuxedo/tux91/ads/adorac.htm#248431
gives an overview of RAC support in Tuxedo.
Ed
<Subramonian Arumugom> wrote in message news:[email protected]..
Hello Nadeer, Hello Ed,
Has the implementation of Tuxedo8.0 with Oracle RAC was completed
successfully ?.
If it is done , I have few doubts. Could you please help me ?.
1) I hope your Tuxedo middleware connects to the oracle Database using
Oracle XA resource manager and the TMS server built using buildtms with
oracle as RM .As per the mail from Ed, migration of Tuxedo9.1 should be done
before moving to Oracle RAC.
Also from BEA documentation, Oracle RAC support was given as new feature in
Tuxedo9.1.
Our Application uses Oracle RM to connect to Oracle DB[ Oracle 10g] from
Tuxedo8.0. So do we need to upgrade to Tuxedo9.1. for using Oracle RAC ?.
Thanks for your help
Best Regards
Subbu
#9880278452
Edited by subramonian.a at 04/16/2007 12:15 AM
Edited by subramonian.a at 04/16/2007 12:19 AM
Edited by subramonian.a at 04/16/2007 1:37 AM
Edited by subramonian.a at 04/16/2007 8:20 AM -
Deploying Oracle Retail Applications in Oracle 10g Application Server
Hi All..
Can anyone help me to know:
How to Deploy Oracle Retail Applications(like RMS,ReIM,RIB) in Oracle 10g Application Server.
Regards.Hi Ahmed,
It sounds you have not yet had the chance to lay eyes on the installation guides - they are not perfect but should point you in the right direction.
Please start at http://www.oracle.com/technetwork/documentation/oracle-retail-100266.html and check out the install guide per application module.
Best regards,
Erik -
Is it possible to run this Oracle based application ???
Hello All,
I have Oracle Forms/reports 9.0.4.1.0 installed on my windows XP.
I am running Oracle based application from this box.
here is the url for it:
http://localhost:8889/forms90/90servlet
Is it possible to run this Oracle based application on different PC on network through above URL?
If yes, how to configure or set up this.
Regards,
DNFrom port number I assume you're using Developer suite. Remember that standalone OC4J is provided by Oracle for testing purposes only. You shouldn't use that in Production environment, where you should install Application Server, eventually the standalone Forms and Reports services (without infrastructure).
-
Hi All
We have to integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL..
can any one please tell me what are the patch sets that need to be applied to
EBS R12.0.5
Oracle Retails
BPEL
The documentation available on metalinks is for EBS R12.0.2 integration with Retail 12.0.5
is there any document which can help us with EBS R12.0.5 integration with Retail 12.0.5
thanks
ArshadDuplicate thread (please post only once):
Urgent...integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL
Re: Urgent...integrate EBS R12.0.5 with Oracle Retail 12.0.5 using BPEL.. -
Integration of Oracle Financials (OF) with Oracle Retail (OR)
Hi ,
We are currently doing a integration of Oracle Financials with Oracle Retail.
We have deployed BPEL processes for this. The Bpel process which transfers set of books from Oracle Financials is SendGLCCToRetek.
The problem is that the process is not transferring set of books id from Financials to Retail.
Any pointers on how what could be the reason. Is there any other BPEL process which should be deployed ?
Other deployed Bpel proceses are working as expected
Best regards,
brindaThe integration of set of books between Financials and Retail (through AIA) is not incorporated, it needs to be manually setup in Retail.
Ex: The Ledger ID's in EBS Financials or PSFT Financials, needs to be manually created as Set of Books in Retail (FIF_GL_SETUP table) -
Where can I download Oracle Retail Applications?
Hi guys,
Could u tell me where I can download Oracle Retail Applications such as Retail Merchandising System, Retail Sales Audit, and so on.
Thanks in advance!The base releases are at edelivery.oracle.com
The patches are in Metalink
SAV -
Unifiers for drag & relate with oracle forms application
Hi All,
Is it possible to do drag & relate functionality in the portal with oracle forms application?? Is there any unifiers already available for drag & relate functionality with oracle forms application ?? If yes, then can anyone share the information.
Regards
MosesHi Moses, you can use D&R with querys in Oracle using query iviews.
You can find a lot of information in:https://www.sdn.sap.com/sdn/ep.sdn?page=unification_welcome.htm
Regards. -
SAP ERP with Oracle Planning Applications
Based on the customers with Oracle VCP applications on top of SAP ERP, I am interested mainly in the Data mapping between Oracle ODS/VCP and SAP ERP. Any input/document will be helpful to start the mapping process. Thanks.
Yes, XI has build in JDBC adapter used to connect to database applications. In your case, if your oracle system is sender, then you can choose JDBC sender, if it is receiver, then you can use JDBC receiver.
By default, XI does not have JDBC driver installed, you must deploy the driver first, there is How -To document from SAP, you can easily search on the forum to get it.
Regards.
Liang -
Using Tuxedo with Oracle Real Application Clusters (RAC)
Hi all ,
Our present Producation environment is Tuxedo8.0 with Oracle 9i as database .
We are planning to implement oracle RAC .
Can any one tell us , with the current tuxedo version which is 8.0 ,can we for RAC Or we need to upgrade Tuxedo to 9.1 for RAC Implementation?
If anyone has Implemented Tuxedo and Oracle with RAC successfully
Pls share your experience.
Thanks In Adavance
Nadeer .Subbu,
As I mentioned earlier in this thread, support for Oracle RAC has been
implemented in Tuxedo 9.1 and in the Tuxedo 8.1 and Tuxedo 9.0 rolling patch
streams. There are no plans to backport this feature to Tuxedo 8.0. If you
plan to use RAC transactionally and if it is possible for multiple services
that could be located on different RAC instances to be accessed in a single
transaction (which will be true for most applications), then you should
upgrade to a version of Tuxedo with support for Oracle RAC. The
documentation at http://e-docs.bea.com/tuxedo/tux91/ads/adorac.htm#248431
gives an overview of RAC support in Tuxedo.
Ed
<Subramonian Arumugom> wrote in message news:[email protected]..
Hello Nadeer, Hello Ed,
Has the implementation of Tuxedo8.0 with Oracle RAC was completed
successfully ?.
If it is done , I have few doubts. Could you please help me ?.
1) I hope your Tuxedo middleware connects to the oracle Database using
Oracle XA resource manager and the TMS server built using buildtms with
oracle as RM .As per the mail from Ed, migration of Tuxedo9.1 should be done
before moving to Oracle RAC.
Also from BEA documentation, Oracle RAC support was given as new feature in
Tuxedo9.1.
Our Application uses Oracle RM to connect to Oracle DB[ Oracle 10g] from
Tuxedo8.0. So do we need to upgrade to Tuxedo9.1. for using Oracle RAC ?.
Thanks for your help
Best Regards
Subbu
#9880278452
Edited by subramonian.a at 04/16/2007 12:15 AM
Edited by subramonian.a at 04/16/2007 12:19 AM
Edited by subramonian.a at 04/16/2007 1:37 AM
Edited by subramonian.a at 04/16/2007 8:20 AM -
Run an Oracle ADF application on a tablet pc?
I've been asked if an Oracle ADF application can run on a tablet pc. (I'm assuming XP Tablet PC Edition) . Does anyone know? If so, can I develop using JDev 10.1.3?
User,
Can you please be more specific? If you are talking about an ADF Faces application, those types of apps are web applications, and can be accessed just fine as long as you have a supported browser. However, your question isn't quite clear - do you mean you want to use JDeveloper 10.1.3 on this tablet PC to develop an application?
John -
HOW to Interact with Oracle HRMS applications from BPEL..
Hi friends...
Well...i just wanted to know HOW easy is it to interact with an Oracle HRMS application from within a BPEL process...
[Say, my BPEL process has some approvals from Finance Dept.., but i need to contact some application like Oracle Payroll, for some data...]
I think we would have to use some Application Adapter Service for this..but not sure..!
Would be great if anyone could refer me to some links or guide me in this regard...
Thanks...Hi,
You can read the data using "Middlware Tools" like XI,Business Connector,Mercator,Webmethods
and using DB-Link.
If you want Read the data using ABAB coding, you need to use "Native SQL" Stament.
For XI and other Middlware , you need configure so many steps,(RFC defination,PORT,Partner)
Required.
Through ABAP Program :
Befor creating program , You need to find out "Oracle Server Name and Other details.
Please use below code as your reference.
Open a native SQL connection.
EXEC SQL.
connect to 'ONECD'
ENDEXEC.
Retrieve information from the BVER tables.
EXEC SQL PERFORMING read_dental.
select emp_ssn_num, emp_fname, emp_lname,
to_char(start_date, 'YYYYMMDD') as start_date,
rec_type,
to_char(eff_date, 'YYYYMMDD') as eff_date,
vendor_plan_id
into :dental
from opr$8oc.BVER_CURR_DENTAL_MASTER
ENDEXEC.
EXEC SQL PERFORMING read_medical.
select emp_ssn_num, emp_fname, emp_lname, rec_type,
to_char(start_date, 'YYYYMMDD') as start_date,
to_char(eff_date, 'YYYYMMDD') as eff_date,
network_code, pcp_number, patient_flag,
vendor_plan_id,
to_char(network_eff_date, 'YYYYMMDD') as
network_eff_date,
to_char(pha_eff_date, 'YYYYMMDD') as
pha_eff_date
into :medical
from opr$8oc.BVER_CURR_MEDICAL_MASTER
ENDEXEC.
Disconnect from the native SQL connection.
EXEC SQL.
DISCONNECT 'ONECD'
ENDEXEC.
The system log has messages like 'Work process is in reconnect status' and 'Work process has left reconnect status' after the ORA-02396 message. And I specifically do a disconnect at the end and a connect at the beginning, but it looks like it is trying to do a reconnect?
Thanks,
Pugazhenthi.P
Satyam computer Services Ltd. -
One of my dll's in my vi doesn't run with the error "application configuration is incorrect"
I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
Thanks in advance.Hm,
it seems that you might have more success in the LabVIEW forum here; this one is for LabWindows/CVI...
Maybe you are looking for
-
I am trying to connect to oracle 11g database via instant client 11.2 odbc driver on windows xp. When I test the connection in the odbc data source administrator, I get the "connection successful" message. When I try connect via Crystal Developer or
-
We are getting the below error when we see in Crawl logs "The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an in
-
Performance Problem with File Adapter using FTP Conection
Hi All, I have a pool of 19 interfaces that send data from R/3 using RFC Adpater, and these interfaces generate 30 TXT files in a target Server. I'm using File Adapters as Receiver Comunication Channel. It's generating a serious perfomance problem. I
-
Who can help solve this XML/Servlet mystery?
Hi, I'm developing a servlet that accepts an HTTP request, contacts a database, processes the request and return an XML document back to the browser. The XML document returned is dependent on which selection a user makes. The problem is that on first
-
More than 1 Ipod but only 1 iTunes
I have just bought an Ipod and they will be synching with iTunes on a PC. Is it possible to then buy another iPod and acceess the same PC/iTunes without causing problems?