Apex4 does not render readonly attribute properly for IE.

I found that Apex4 renders the readonly attribute with an extra quotation mark for IE. So I get this:
"readonly="readonly"
And it doesn't work, obviously. For Firefox, all is good.
The simplest solution seems to be to just leave the Disabled attribute set to No and manually add "readonly=true" to the "HTML Form Element Attributes" field.

Hi,
yes that is a problem on our known issue list http://www.oracle.com/technetwork/developer-tools/apex/40-known-issues-159870.html and will be fixed in our upcoming patchset 4.0.1. Actually the release candidate for this patchset has already been installed on apex.oracle.com. So there you should not be able to reproduce the problem anymore.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

Similar Messages

ADF JDeveloper wysiwyg visual editor does not render properly my jspx page

Hi everybody,
I am working with JDev 11.1.1.5 and I have an issue with the wysiwyg visual editor.
My jspx page does not render properly: I cannot see the full page whatever is the resolution, even in full screen mode.
I've tried to activate in the preferences the option Show Design Time Messages in Log but it does not display any error.
When I run my page or execute a preview of my page, my page is rendered correctly the browser.
Can someone help please?
Thanks by advance

Hi Frank,
I've tried to change the resolution but whatever is the resolution the page is not rendered correctly. Actually, I can see the full page, but there are some panel boxes which are not displayed.
In my page, I have a main panelgrouplayout which contains 2 dashboard panels. The second dashboard contains panel boxes, only the 3 first rows of panel boxes are displayed in this dashboard panel while I have 6 rows of panel boxes.
In the design page, when I click on the 2nd dashboard and do "design this container", I can actually see that all the rows display correctly, it simply that I do not see them all in the main page.
In short, the 2 dashboard panels display entirely, simply the 2nd one does not show all its content while displayed in the main page.
Is there a solution for this?
Thanks by advance

Asp code does not render for first record in looped recordset

I have posted this question on a javascript forum as it
contains javascript code however it was believed to be an asp
issue.
The following head section javascript code contains the
function showBigImage( isource,bigImage,header ) function call of
discussion:
var currentImage;
function showBigImage( isource,bigImage,header ) {
var theImage = document.getElementById( 'largeimage' );
theImage.src = isource;
currentImage = bigImage;
document.getElementById( 'photoHeader' ).innerHTML=header;
document.getElementById( 'largeimage' ).alt=header;
The following rendered looped recordset code illustrates how
the "header" parameter of this showBigImage(
isource,bigImage,header ) function call does not render ONLY FOR
THE FIRST RECORD OF THE RECORDSET as it is blank:
<a href= "javascript:;" > <td height=36
valign="middle" class="small_img" onmouseover="showBigImage(
'imagescript.asp?path=images/portable_stage.jpg&width=250','images/portable_stage.jpg',''
)"> <img
src="imagescript.asp?path=images/portable_stage.jpg&width=36"
border="0" alt="" /> </td> </a>
<a href= "javascript:;" > <td height=36
valign="middle" class="small_img" onmouseover="showBigImage(
'imagescript.asp?path=images/seated_riserset.jpg&width=250','images/seated_riserset.jpg', 'Portable
stage configuration using 9 units of the 3 ft x 8 ft platforms in 3
different heights' )"> <img
src="imagescript.asp?path=images/seated_riserset.jpg&width=36"
border="0" alt="" /> </td> </a>
<a href= "javascript:;" > <td height=36
valign="middle" class="small_img" onmouseover="showBigImage(
'imagescript.asp?path=images/Stageset.jpg&width=250','images/Stageset.jpg','Portable
stage configuration using 16 units of the 4 ft x 8 ft platforms'
)"> <img
src="imagescript.asp?path=images/Stageset.jpg&width=36"
border="0" alt="" /> </td> </a>
<a href= "javascript:;" > <td height=36
valign="middle" class="small_img" onmouseover="showBigImage(
'imagescript.asp?path=images/Runset.jpg&width=250','images/Runset.jpg','Portable
stage runset configuration' )"> <img
src="imagescript.asp?path=images/Runset.jpg&width=36"
border="0" alt="" /> </td> </a>
Because of this problem, the caption text does not display
for this first image record once the thumbnail images are moused
over. You can view this page example at
http://www.canchair.com/new_web_product_detail.asp?ProductID=198&ProductFamily=1&ProductFa milySub=10

Please help with this issue!!!

[svn] 3668: Fix for SDK-15941: selectedItem/ selectedIndex does not render as selected.

Revision: 3668
Author: [email protected]
Date: 2008-10-15 15:25:04 -0700 (Wed, 15 Oct 2008)
Log Message:
Fix for SDK-15941: selectedItem/selectedIndex does not render as selected.
Reviewer: Deepa
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15941
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxList.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/FxListBase.as

This bug figures out also when creating a custom spark ComboBox, then trying to programatically update the userProposedSelectedIndex property. The proposed selected index is selected, but does not apply the same skin as when mouse is on rollover or item is selected due to up and down keys.
The issue seems like updating the status of the item renderer to rollover or selected to get the same skin applied.
Please could you attach DropDow nList.as that you edited ?
Thank you so much.

Safari 3.2.1 for XP does not display all graphics properly

Safari 3.2.1 for XP does not display all graphics properly, including the Apple Support Website http://www.apple.com/support/.

Maybe this will also help:
If your Safari won't open, one or more of the following procedures should fix it:
1. Go to Home/Library/Safari/ folder and remove the following two files:
• history.plist
• lastsession.plist
(Safari may not load properly If these two files are corrupted.)
2. Go to Home/Library/Caches/Metadata/Safari/ and remove the contents of that folder.
(These are just webhistory files and are not required for Safari to run. However, similar to preference files, problems can arise if they have become corrupt.)
3. Locate the cookies.plist file that's located in the Home/Library/Cookies/ folder and remove it.
(Again, faults in stored cookies may interfere with Safari's launch.)
4. Check whether any of your third-party internet plug-ins may be interfering with the launch of Safari by carefully moving them to the desktop (do NOT delete them at this stage). You can find these in two places:
Home/Library/Internet Plug-Ins/ folder, and Global plug-ins are located in the Macintosh HD/Library/Internet Plug-ins/ folder.
Restart Safari and place them back in the correct folders, one at a time, closing and re-opening Safari each time. If you discover that one of them was causing the problem with launching Safari, trash it and download and install a fresh copy.

.pdf does not render correctly

Hello everyone:
When creating a .pdf from a .html dreamweaver file it does not render properly. Headings go to the left and sidebar images do not display properly. Any ideas as to how to fix this. Using Adode Acrobat 8 Professional and Adobe Dreamweaver CS3. Many Thanks

Take a screenshot of the page then convert that to a PDF.
The PrtScr key on the keyboard only captures what you can see on screen (or the active window).
To get the entire page, either use something like SnagIt (commercial) or use one of the free add-ons for Firefox.
Edit: or as Paula suggests, create a print stylesheet.
http://www.alistapart.com/articles/goingtoprint/
Message was edited by: John Waller

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

Error : Sales Org.Unit does not have these attributes -- Urgent

Hi, Team,
I am unable to create a service order with serivce material ( Only installation visit charges ) for w/o warranty product .
I am getting error : " Sales Org.Unit does not have these attributes "
I had checked the related Org data of respective sales org , already the sales area combination is also maintained from R/3 with required attributes "
Pls revert with possible solution .
Regards,
VCS

PePe :
Thanks for reversion !!
Basically it is a product Service Material (Servicing Charges), where in I had checked in the transaction , Though the required sales area is well maintained in the R/3 System and is being replicated to the CRM .
When I checked the product Service material , the required comination is missing and could find other sales area combinations .
Pls guide , how to go to get this resolved .
Regards,
VCS

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

"ORA-21700: object does not exist or is marked for delete" select from ADT

Posted this in OLAP section as well, but since this is Object technology, I thought I would repeat it here. Sorry about the duplication.
BTW, I'm using Oracle9i 9.2.0.4.1.
I'm trying to create a script that can automate the process of generating abstract data types for use in an OLAP_TABLE function. I'm following the examples in the documentation. Everything runs great the FIRST time I run my script, but when I drop my types and re-create them, when I run the next SELECT statement against the OLAP_TABLE function, I get:
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
My script drops the ADTs before creating, but somehow they are not REALLY being dropped.
SET ECHO ON
SET SERVEROUT ON
DROP TYPE ts_table_6;
DROP TYPE ts_row6;
CREATE TYPE ts_row6 AS OBJECT(
CONJ2002 VARCHAR2(400),
CONJ2002_DATA number(16),
PERIOD VARCHAR2(10),
PERIOD_NAME VARCHAR2(20));
CREATE TYPE ts_table_6 AS TABLE OF ts_row6;
SELECT CONJ2002, period, period_name, conj2002_data FROM TABLE(OLAP_TABLE(
'REFVLMTA DURATION QUERY',
'ts_table_6',
'limit CONJ2002 to first 3',
'MEASURE CONJ2002_DATA from CONJ2002.DATA
DIMENSION CONJ2002 from CONJ2002
DIMENSION PERIOD from PERIOD WITH
ATTRIBUTE PERIOD_NAME from period.name'));
Again, it works the first time, but not the second time. I need to bump up the ADT names to ts_row7 and ts_table_7. SQL Plus says the types are being dropped.
Any ideas?
Dan Vlamis [email protected]

Hi Dan
What append if you do a connect between the DROP and the CREATE statements?
Chris

ADF panelGroup component's background image in CSS does not render

Hi,
I have an issue with the panelGroup component, where a background-image specified in the styleClass DOES NOT RENDER when deployed on the OAS. It works fine when I run the page on my local OC4J.
I've verified that the image I use is deployed correctly on the server.
We are using :
JDeveloper Studio Edition: 10.1.3.3.0.4157 (Build JDEVADF_10.1.3.3.0_NT_070619.1129.4157)
Oracle Application Server: 10.1.3.5.0 running on RHEL 5.
I'm customizing pages of an ADF application to change the branding and skinning. The page header region used in the application uses a 'panelPageHeader' and the image I need to introduce is part of branding and must be rendered above the application menus (2 levels: 1->MenuTabs, 2-MenuBar).
If it would help to see how my page renders locally, here's the link: http://tech-nik-alley.blogspot.com/2010/09/adf-panelgroups-background-image.html
(The brightly colored bar above the menus is newly introduced, ABC_Lightbar.jpg).
Using an objectImage with my light_bar image as source, directly in the facet menu2, causes the alignment of all pages to get disrupted. Hence the work-around of using the image as a background.
A copy of my pageHeader region is below, with comments. The panelGroup component newly introduced is in the facet "menu2". I've added the CSS definitions in the page as comments as appropriate.
Any pointers on how to debug further, work-arounds etc. are appreciated.
TIA and regards
Deepak.
=====MY PAGE HEADER REGION====
<af:regionDef var="attr">
<af:panelPageHeader styleClass="ss0" > <!—ss0 is "padding:0px;margin-left:14%;margin-right:14%;margin-top:0px;margin-bottom:0px;display:block;background-color:transparent;" -->
<f:facet name="branding">
<af:panelGroup styleClass="ss_brand"> 
<af:objectImage shortDesc="#{imageBean['SS_COMPANY_LOGO'].description}"
source="#{imageBean['SS_COMPANY_LOGO'].physicalName}"/>
</af:panelGroup>
</f:facet>
<f:facet name="menuGlobal" >
<af:panelGroup layout="horizontal" styleClass="ss00" rendered="#{attr.globalMenuShown}">     <!—ss00 is "margin-right:10px;" -->
<f:facet name="separator">
<af:objectImage source="#{imageBean['SS_GLOBAL_SEPARATOR'].physicalName}" shortDesc=""/>
</f:facet>
<af:menuButtons>
<af:goMenuItem text="#{sessionBean.authenticated?pageHeaderBean.loggedInUserInfo:messageBean.SS_GEN_GUEST}"/>
</af:menuButtons>
<af:menuButtons startDepth="0" var="menuGlobal" value="#{menuModel.model}">
<f:facet name="nodeStamp">
<af:goMenuItem text="#{menuGlobal.label}"
destination="#{menuGlobal.fileName}"
rendered="#{menuGlobal.type=='global' && menuGlobal.rendered}"
/>
</f:facet>
</af:menuButtons>
</af:panelGroup>
</f:facet>
<f:facet name="menu1" >
</f:facet>
<f:facet name="menu2" >     
                    
<af:panelGroup rendered="#{skinFamily.menuLayout=='horizontal' and attr.otherMenuShown}">
     
<af:panelGroup layout="vertical" styleClass="pageHeaderLightBar"> 
     
<af:objectSpacer width="22px"/>
</af:panelGroup>
<af:panelGroup styleClass="pageHeaderMenuLevelOne"> 
<af:menuTabs startDepth="0" var="menuTab" value="#{menuModel.model}">     
<f:facet name="nodeStamp">
<af:goMenuItem text="#{menuTab.label}"
destination="#{menuTab.fileName}"
rendered="#{menuTab.rendered and menuTab.type!='global'}"/>
</f:facet>
</af:menuTabs>
<af:menuBar startDepth="1" var="menuBar" value="#{menuModel.model}">     
<f:facet name="nodeStamp">
<af:goMenuItem text="#{menuBar.label}"
destination="#{menuBar.fileName}"
rendered="#{menuBar.rendered}" />
</f:facet>
</af:menuBar>
</af:panelGroup>
</af:panelGroup>
</f:facet>
</af:panelPageHeader>
</af:regionDef>
===================================

'background-image:url("../image/Sunset.jpg")' is a relative URL... relative to the final generated markup. It should be wrong like 99% of the times. You should rather use a styleClass and deal with the background-image with skinning as the skinning engines knows how to deal with such urls. Note that you'll most likely have to define a new resource loader and servlet mapping for the ResourceServlet. I know someone made a blog entry about that, was it Frank or Shay? Hmmm cannot remember... Maybe John as well. Anyway a Google search should yield good results for adf resource loader I think.
Regards,
~ Simon

CR XI R 2 and CR 2008 does not render Khmer Unicode correctly

Post Author: khmerangkor
CA Forum: General
Having evaluate CR XI R 2 and CR 2008 in Visual Studio 2005 and Visual Studio 2008. The result:When I work with Crystal
Report Application itself is fully supporting the Khmer Unicode. Then
I include it into VS 2005 and 2008, it does not support Khmer Unicode at all. Basically, it does not render at all. Hope Crystal Report Development Team look into this problem and help us to develop report in Khmer Unicode. We belive in your product.Regards,Khmer

Don,
the problem seem to be that Version XI Rel 2 is not only an Upgrade of Version XI (for what I just purchased a license) but a special Version.
So I have the Trial Version XI Rel 2 and my Reg. Key does not comply with it.
I Think SAP ony gives the user the right to use Version XI Rel 2 I you buy a full Version (even if you are Crystal reports Customer for 15 years).
Very diffuse and time wasting the whole thing. I hope my old projects still using Crystal reports will soon run out of use.
Cheers for your efforts
Miko

After Effects CS5.5 does not render any type of file, corrupted message.

Hey guys,
About 2 days ago I was working on my file as usual (with no changes whatsoever to my software or hardware) and After Effects suddenly refuses to render my video and does not even go past one single frame, it will not render movies, image sequences, anything, it does not render period.
when I click on stop it gives me this message:
I have not changed any settings on my computer or After Effects and rendering this specific file worked fine before this random occurence a couple days ago, other files render work so something is wrong with this file specifically.
The project I am working on is a rotoscoping animation, I have used the Rotobrush on some MOV files, along with Particular Trapcode, and some effects such as Glow and Blur, nothing fancy.
Here's my technical info , hopefully it's enough detail:
After Effects CS5.5
Mac OSX 10.7.4
Memory 16GB 1333 MHz DDr3
3.1 Ghz Intel Core i5
MOVIE FILES INFO:
50fps
1280x720
h.264
Linear PCM
16-bit little-endian signed integer, 4800HZ (stereo LR)
File sizes range from 1.33Gb to 500mb (I can't compromise on quality as this is a big project)
Is there anything else you need to know? my deadline was yesterday and this is for a live show next week, any help would be greatly appreciated.
Also audio's not a big deal as I'm not using it, here are some screenshots of my project settings.

At first the problem came back but then I disabled the 'media cache' option in Preferences as advised above, seems to work for now.
I keep having to turn this option on and off if I want it to render, there must be some way around this.

CS4 Design view does not render CSS correctly but browser does !?!?

I am designing a layout using primarily CSS. I want to insert a table inside one of the div's. In design view the table gets pushed way out of position but in live view and on the web, the page looks correct. Why? Am I missing something in design view?
Here is the actual page I am working on Sample Page
Here is what I see in design view Design View
This glitch is making it difficult to add content to the table.
I tried to edit the page with Contribute CS4 and the table gets pushed so far out of position that it is impossible to access it. The page looks fine when I am connected but as soon as I try to edit it does not render properly.

This question comes up almost daily, and I dont recall seeing an answer that is much different. It comes down to that it does not matter what DV shows, it is the browser view that counts. How frustrating it is to spend time and effort to correct a view in DW Design, only to find out it throws your browser view all askew. Its hard enough to make x number of different browsers all look good with however many screen resolutions, to worry about something that in the end does not matter.....
Work more in code view, let F12 be your companion.
Gary

This PC does not meet the minimum requirements for this version of iTunes

Trying to update my iTunes, the installer gives the error message:
"This PC does not meet the minimum requirements for this version of iTunes"
I have gone through the procedures listed in the support section, and have completely removed all Apple software, deleted the file folders etc etc.... still no joy.
This is most annoying as I've just received my brand new iPhone 6+ and I was trying to backup my old device to iTunes so I could restore it onto the new phone and get using it today. Hacked off big time :-\

Well I've eventually managed a work-around. Ver. 11.5.1 was no good because it wasn't compatible with my iphone 5, next one wasn't compatible with my iphone 6+, eventually got 11.4 installed so I could back up my old iphone 5 to it, then restore that backup onto my iphone 6+, which then wasn't up to date with the current iOS so I had to do that before it would sync my apps.
What a ball ache.
If someone would kindly let me know when the latest iTunes works again I's appreciate it, until then I'll have to stick with what I've got.
I need to start again with my music collection, re-import everything and get it on my iphone, because I had to delete it all a few months ago when iOS updated because it didn't have enough storage space on the device! Somehow lost it all off my iTunes in the process!
TBH I've always found the Apple system hideously complicated and infuriating when it doesn't work properly. Instead of making it more and more complex it needs simplifying and making fool-proof so people don't have to go through all this BS just to use their **** phone!

Apex4 does not render readonly attribute properly for IE.

Similar Messages

Maybe you are looking for