API for loading inventory org access for responsibilities

Hi there,
I need to give Inventory Organization Access to more then 100 responsiibilities. Is there an api that I can use that would load this information into org_access table? I am on 12.1.2 version of EBS.
Thanks
Irina.

I am not aware of any api for this.
You can consider using a key-mapping software such as Data loader / winparrot
OR
you can write your own script to insert records into the table. It should be a straight forward insert. You just need to ensure that the combination of organization_id, responsibility_id and application_id is valid.
Sandeep Gandhi

Similar Messages

API for loading Bank account details for the Customer

Hi,
Can anyone tell me what is the API that needs to be used for loading bank account information for the Customer?
Thanks
GM

Hi,
Were you not able to achieve your requirement with Customer Interface Program?
There is a interface table 'RA_CUSTOMER_BANKS_INT_ALL' which is used to store customer bank account information. Run the program after inserting the records into this table.
I guess, there is no public API.
Regards,
Ram

Does anyone have a good link for images I can access for my web development work. I have Adobe Creative SUite 5.5

Does anyone have a good link for images I can access for my web development work. I have Adobe Creative Suite 5.5

In short, NO.
I was hoping that the 7.4.1 update would allow it to work, but it has caused more problems than it is worth.If you do actually get it to work you will see the TC in finder (under Shared) when connected to the internet outside of your home network. What I have found though is that the 7.4.1 firmware update has made using the internet at home almost impossible.
I have tried Hamachi but it is not reliable.
I have settled with Dropbox so my files are synced between my home machine and laptop.

SAP R3 and BI system requirement for loading Inventory data (0IC_C03)

Hi,
I have installed the Business content for 0IC_C03,activated the required datasources in R3 and replicated the same in SAP BI.
However, while filling up setup tables the load is getting failed and it is giving error "No internal table space....".
This is related to memory issues in SAP R3.Please let me know the minimum system requirement to do the above activity,
for example RAM,parameters to be set from basis point of view,etc.The backend is MSSQL 2003 having RAM of 20GB.There is around one crore of data.
Please let me as soon as possible.
Regards
Deepak.

Thank you Murali.
But approximately can you tell me what is the memory requirement for SAP R3 and SAP BI for such type of applications.
Regards
Deepak.

Use Same URL for Internal and External Access for CRM 2015 IFD

I have setup a CRM2015 server for IFD access.
ADFS and CRM are on separate servers.
CRM server all roles
ADFS 2.0 server.
Using the internal URL I am able to access CRM without entering my details (as expected)
Using the external URL I am authenticated by ADFS as expected and can sign in.
We have an internal domain domain.local
We have an external domain domain.com (the certificate is for *.domain.com)
We have a DNS zone created internally for domain.com.
CRM URLs
internal : internalcrm.domain.com
External : externalcrm.domain.com
I would like all users to use the same link regardless of them being internal or external, but I would like so that any user who is on the domain is automatically logged in without entering their username and
password. What is the best way to do this?
I have tried creating a cname record on the internal domain.com zone pointing externalcrm.domain.com to internalcrm.domain.com but that didn't work, I still get the ADFS sign in page.
Thanks

So fair warning, what you're asking for isn't really a supported deployment method of CRM.
That said, you should be able to do some DNS trickery internal to your network that points your "crm.domain.com" to "crm.domain.local" and then hopefully CRM will treat the connection as if it came from an internal network.
Otherwise, you're likely going to have to accept that everyone gets the ADFS login page internal and external to your network.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

Corporate responsibility for logging guest Internet access

Hi all
Can anyone tell me what the requirement is in the uk for logging guest Internet access for guest users at my co
Company ? Is it lawful requirement ?

The following documents lists all the supported Databases,
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/user/d.htm

How to seperate the access for two identical databases from two application

First I have to say I'm sorry... Oracle and the oracle architecture are totally new for me. However I hope to get some help with this.
We have one Oracle 10g server and a database name A with table name X, Y and Z, for Application AA with access for property file AAA.
The server capacity are almost not being used.
Here are my thought, how can I add a database name B with table name X, Y and Z (yes same tables as in database A) data for application BB with access for property file BBB.
how can I seperate the 2 property files (question: on a port number?), so in case there by a mistake should be switch around on 2 property files, it then is impossible to access the date from Application AA to date in database name B.
Password on Database A (incl table) and Database B (incl table) are the same.
Is there any solution to this?

What I would like to do is make use of the resource on one machine.
I have several similar applications, databases, tables and password where data should be totally separated from each other. however I would trying to prevent that there could be any data access from Application AA to Database B in case there should be a switch of property files
I'm familiar with Sybase environment, however isn't there some thing fancy in oracle there can seperate to almost identical applications to access other databases

Can the inventory orgs of OU2 be used in the OU1 in teh ASCP plan...

Hello Gurus,
I defined an ASCP plan in one of the operating units OU1 and i have used all the inventory organizations for that ASCP plan which is definde in the OU1.
There is an aonther Operating Unit OU2 where in some inventory orgs cater products to OU1.............
Can i use the inventory organization of the OU2 to be used in the ASCP plan that i have defined in the OU1
Please help me in clarifying this doubt at the earliest

ASCP does not care about OU's. It only looks at inventory organizations.
enable the org for collections in the ASCP instances form and set org access for the responsibility used in the organization security form (Adv Planning Administrator)

Planning across Inventory Orgs

Hi All:
We are implementing OPM 11.5.10 for a Food Manufacturer. In regards we have set up an inventory org for each of their divisions. They plan to use ASCP for Planning.
Currently ASCP has been setup for each Inventory Org. Typically, In order to view planning recommendations , they have to launch plan for each inventory org. Lets say the customer has two inventory orgs, then the plan needs to be run twice ( 2 ) once for Inv org1 and second time for Inv org2.
My Question : Is there a way so that we can launch the plan only once but be able to plan for all inventory orgs in one shot ?
Thanks in advance for all the help.
Sandeep Penumalli

is there any reason why customer does nt want to run a single ASCP plan? I guess they should be running one single ASCP plan for both the orgs and you can set up instead of viewing plans view by queries. On the workbench instead of Plans use queries Tab. There are various queries possible to restrict to see one org's plan recommendation alone .
Thnx
Partha

Inventory load failed... OPatch cannot load inventory for the given Oracle Home.OPatch failed with error code = 73

Hi,
I am going to apply bundle patch and my oracle database is 11.2.0.2 and platform Microsoft Windows x86. As per the read me file Oracle recommends that to use OPatch utility release 11.2.0.1.3 or later.To check the accessibility to the inventory i use %ORACLE_HOME%/OPatch/opatch lsinventory command.
It ended up with giving below details.
Invoking OPatch 11.2.0.1.1
OPatch could not create/open history file for writing : ***my oracle home path***\cfgtoollogs\opatch\opatch_history.txt
**oracle_home***\cfgtoollogs\opatch\opatch_history.txt (Access is denied)
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could not open log file, logging will not be possible
Oracle Home       : *****
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.1.1
OUI version       : 11.2.0.2.0
OUI location      : **ORACLE_HOME***\oui
Log file location : **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
Patch history file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt
OPatch failed with error code = 73
Can anyone please help me to solve this?
Do I need to install latest opatch utility?

Hi,
this error message " LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt "
indicates that you have permission issue with your file systems : ORACLE_HOME/cfgtoollogs/opatch
double check the owner of this file system.
Regards,

API for Physical Inventory Tag Count

Hi , Please let me know if any Public API available for updating the physical Inventory tag count ? We have requirement like update of physical counts of Inventory tags, the idea is the counts are stored in flat file is in same column format of Physical Inventory Tag count form in Inventory , here just we need to update the counts. let me know any public API avaialble

According to the oracle knowledgebase, there is no Public API. But there is an enhancement request that you might want to add your company to.
Bug 3611131 : INTERFACE/API FOR PHYSICAL INVENTORY ADJUSTMENTS / TAGS

In I tunes I cant down load a CD. I get the message "The file couldn't be convereted. You don't have write access for you ITunes media folder or a folder with in it. To change permissions, ... When I do this it still dosen't work

In I tunes I can't down load a CD. I get the message "The file couldn't be convereted. You don't have write access for you ITunes media folder or a folder with in it. To change permissions, ... When I do this it still dosen't work.

Thanks C F McBlob but I recursively changed the permissions of my Music directory meaning every file and directory beneath it, as well as the directory itself, had the write permissions added.
I used "chmod -R u+w ./Music" and chmod -R g+w ./Music" to do it.
Alas, no cigar. :-(

Load Balancing 11i for both Intranet & Internet Access

Our current environment for 11i (11.5.5) is accessed only internally (via Intranet). We need to allow outside access (via Internet) also for self-service apps (ie. HR). Oracle Support/Metalink has stated that Load Balancing (note 148155.1) is the only supported method to have multiple (Apps Servers) systems access a single database. Could I get feedback from anyone who has implemented Load Balancing for 11i? Additionally if someone has implemented this for both intranet and internet access how has your company setup? Do the secondary server(s) from the Load Balancing note reside in the DMZ? And thus the primary app server and database reside inside the firewall? Thanks....

Hi,
We are using 6 middle tiers for internal access for intranet access and 2 middle tiers in External DMZ with only web server running for Extrenal Access over Internet for Self Service.
You Implement one Load Balancer for first 6 internal Middle Tiers with site level profiles pointing to Internal .
You implement second Load balancer for external 2 middle tiers with server level profile options for these two servers pointing to External Load balancer .
To check how to implement load balancer vsiit
http://becomeappsdba.blogspot.com/2006/09/configure-hardware-load-balancer-at.html
Wait for my next post in above blog site with step by step procedure to implement above solution External & Internal one
Atul Kumar
Oracle Apps DBA
http://teachmeoracle.com

Use Web API url for loading an external image in a report

Hi there,
I am trying to host an image in a report, which is coming out of a Web API. I am able access the image through a URL in a browser:
https://companytest.com/api/TestFormImage?id=10358&EntityId=6719&imgMetadataName=TestDiagram
Can anyone please help me how to include this in a report ? I have tried to include this as an external image with the URL embedded as a string like:
=string.Format("https://companytest.com/api/TestFormImage?id=10358&EntityId=6719&imgMetadataName=TestDiagram")
NOTE: the output of the Web API is an image of MIME type PNG.
Thanks in advance!
Regards, Laks

To add an external image
In report design view, on the Insert tab, click Image.
On the design surface, click and then drag a box to the desired size of the image.
On the General tab of the Image Properties dialog box, type a name in the
Name text box or accept the default.
(Optional) In the Tooltip text box, type text to display when the user hovers over the image in a report rendered for HTML.
In Select the image source, select External.
For an image on a report server in native mode, type a relative path to the image in the
Use this image box—for example, ../images/image1.jpg.
For an image on a report server in SharePoint integrated mode, or any other Web site, type a full URL to the image in the
Use this image box—for example, http://<SharePointservername>/<site>/Documents/images/image1.jpg.
For more information, see Specifying Paths to External Items (Report Builder and SSRS).
(Optional) Click Size, Visibility, Action, or
Border to set additional properties for the image report item.
Click OK.
Andy Tauber
Data Architect
The Vancouver Clinic
Website | LinkedIn
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

"There was an error loading the preference bundle for accessibility" it appears when i open my accessibility, that is why i cant use my assistive touch

"There was an error loading the preference bundle for accessibility" it appears when i open my accessibility

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

API for loading inventory org access for responsibilities

Similar Messages

Maybe you are looking for