APL2 From AII to R3

Hi all,
Does anybody know if Auto-Id sends handling unit information to R3??
I explain, I refer when you do packing in AII and the return message (APL2) is sent to R3 if you can pass in the message the handling unit which is going to be in the delivery (that is, assign the handlings unit in R3 from AII, not automatically in R3)
If Auto-Id does it, how you must configure it for this???
Thanks and best regards.

Hi Daniel,
I guess this should help you further. Good luck!
Regards,
Marc Korstanje
=======================================================
Both following two settings should be set in customizing
SAP Customizing > Auto-Id Infrastructure > Conditions and rules > Activities > Define Activities
Setting:
Activity name: DEVICE_SEND_FEEDBACK
Parameter name: PACK_MATERIAL_PALLET (description pallet level)
Activity parameter (allowed values): PACK_PAL
This PACK_PAL (or any other name) should correspond with the materialnr. In which you want to pack on the backend site !
You first set it here as an allowed value.
Secondly you choose this pack_pal in the following customizing transaction:
SAP Customizing > Auto-Id Infrastructure > Conditions and rules > Rules > Define rules
Setting:
Rule definition > Activity parameter.
Rule Definition = FPP
Activity name = (7) DEVICE_SEND_FEEDBACK
Parameter name = PACK_MATERIAL_PALLET
Parameter value = PACK_PAL (this is the material we created to pack in)

Similar Messages

Bad performance in sending IDOCs from WAS to R3

Hi all,
We have the following scenario:
WAS 7.0 XI R3
with protocol: SOAP XI IDOC
When IDOC comes from WAS to R3, it appers always at first time a 405 error (we see it in sxmb_moni transaction of WAS). After 3 or 4 minutes it is reprocessed automatically and it arrives OK without doing anything.
(It doesnt happen from R3 to WAS, we mean that it works OK in this direction)
Does anybody know why it happens? How can we perform it faster?
Thank you in advance,
Kind regards,
Xavier

Hi Vijaya,
First of all, we are sorry for the delay. We have had some problems with the J2EE Engine, and it was not possible to realise tests to try to solve the problem of this message.
We have read the note you indicated us (906435) which says that 3 reasons can cause our problem and propose a solution for each one.
1) We have added and modified some parameters as it is indicated in the XI Tuning Guide, but the problem persists. So, could you possibly recommend us which parameters may help us?
We are working with SAP AII 4.0, XI and R3. There is a CPU for each system. The problem is always in the direction from AII to R3. Theres always only one user connected to SAP, who sends only one IDOC at the same time, and he doesnt do any action in the system until the IDOC arrives to R3.
Do you think it could be a problem of memory? Do we need any specific conditions of this in our case?
2) We have modified the parameter icm/server_port_0 as it is indicated and nothing has changed.
3) The third point is OK, we have ICM 7.00. So, we dont need to check our kernel patch level.
What other information we can provide you to try to help us?
Thanks in advance.
Best regards,
Xavier

AII - XI Scenarios

Hi All,
Please provide some links for small scenarios to start working with AII. I want to transfer some data from AII to R3 through XI. It will be better if i find some "How to" docs.
(I have referred blogs by Sheng Wang)
Thanks,
Uma

Have you seen the Master Guide on SAP Service Marketplace at service.sap.com/instguides : SAP Components : SAP Solutions for RFID.

Middleware - SAP AII

Hi RFID Friends,
i found many informations about SAP AII and RFID Tech. in this , but nothing to a Middleware, witch is essentail for comm. between RFID hardware and SAP. help.sap.com is like a cloesed book in this case. I read about BizTalk or Websphere, XI... but all those are to much for an Small Business case. it's unclear for me:
1. What SAP AII need to get DATA from an Reader. What is the simply and cheap way?
2. Because AII is an standalone System, is XI neccecery to get this Information from AII into SAP ERP?
Can you help me please.
Thank you all
Bülent

Hi Bullent,
You were correct in not finding out any information on RFID Middleware on help.sap.com.
This is because SAP is not involved in that business at all. Instead SAP depends upon its partners to deliver RFID middleware solutions. For eg, Biztalk from Microsoft, IBM middleware and PIXIE from Infosys technologies Ltd are such examples. SAP AII exposes an interface which the middleware development team has to comply with. Then there is also a SAP Certification process for Device middlewares that support communication with SAP AII.
SAP similarly also depends upon its partners for RFID hardware also. For. Zebra, Motorola are some of the RFID hardware that are compliant with SAP AII for mobile devices.
Answer to your questions:
1) SAP AII can get whatever data is written on the tags. It depends on your business requirement what data is needed by you on the tags. There is no simple or cheap way. There are two ways.
a) Fixed Readers: Require RFID middleware between hardware and SAP AII
b) Mobile Readers: Can be directly supported by SAP AII witout device middleware. (So this can be cheaper )
2) Yes SAP XI is necessary to send data to SAP ERP. Else it will require huge custom abap development to support this.
I hope i have answered your questions. Thnks

Pass additional parameters to AII

Hi,
Is it possible to pass additional parameters for Serial Number Request through Name Value pair in a xml? If so then please cite an example.
The scenario requirement is 3rd party non SAP systems will be requesting Serial Numbers from AII via SAP XI. However additional parameters will also be sent in Name Value pair for certain validations by SAP XI.

no, you can't do that.
you could create your own class to extend your
interactiveobjects and pass additional parameters in your custom
mouse handlers, but it's even easier, in your situation, to use
movieclips to dispatch your mouse events and define whatever
properties you need to use in functionName() as movieclip
properties and retrieve them using
MovieClip(e.currentTarget).whateverProperty.

FAQ: AII-DC-RFID (Auto ID Infrastructure - Device Controller Interface)

Version: 20060317
Q: Where can i find more information to the AII-DC-RFID interface ?
A: Have a look on our ICC webpage in the SDN:
SAP Supply Chain Management- Device Controller Interface (AII-DC-RFID) [original link is broken]
Q: What costs are arising when we want our product to be certified ?
A: See also out SDN page under the headline "Price List".
Q: Is there a link/page for the already certified products for this interface ?
A: Sure, have a look on our ICC page under the headline "Certified Solutions"
Q: Who can we ask in case of general question ?
A: Have a look at our general ICC forum:
SAP Integration and Certification Center (SAP ICC)
Of course, if you have urgent requests you can send them also directly to our local ICC's:
ICC Walldorf in Germany: [email protected]
ICC Palo Alto in USA: [email protected]
ICC Bangalore in India: [email protected]
Q: Who can we ask in case of technical questions ?
A: This depends on the state of your certification project.
1.) If the certification contracts have been signed then you can ask in this forum and if this does not solve your question go back to your assigned integration consultant.
2.) When the certification contracts have not been signed then you can ask questions in this forum.
Q: Are there differences between version 2.1 and 4.0 ?
A: The interface has no changes from AII 2.1 to AII 4.0.

Hi Sara,
SAP Device Controller Interface is the interface that will be used by device controller softwares to send data to SAP AII and vice versa. Device controllers filter the RFID reads and send a unique read event to SAP AII. SAP AII on receiving this message processes it. It can be the case that as part of processing we also require to send data back to devices/controller or send a command such as tag commissioning. At this time also the same interface is used.
Regards,
Yogesh Bhatia..

FAQ: AII-MBL-RFID (RFID Mobile Device Integration)

Version: 20060317
Q: Where can i find more information to the AII-MBL-RFID interface ?
A: Have a look on our ICC webpage in the SDN:
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/bc6e21e7-0801-0010-08bc-99931062a3e4 [original link is broken]
Q: What costs are arising when we want our product to be certified ?
A: See also out SDN page under the headline "Price List".
Q: Is there a link/page for the already certified products for this interface ?
A: Sure, have a look on our ICC page under the headline "Certified Solutions"
Q: Who can we ask in case of general question ?
A: Have a look at our general ICC forum:
SAP Integration and Certification Center (SAP ICC)
Of course, if you have urgent requests you can send them also directly to our local ICC's:
ICC Walldorf in Germany: [email protected]
ICC Palo Alto in USA: [email protected]
ICC Bangalore in India: [email protected]
Q: Who can we ask in case of technical questions ?
A: This depends on the state of your certification project.
1.) If the certification contracts have been signed then you can ask in this forum and if this does not solve your question go back to your assigned integration consultant.
2.) When the certification contracts have not been signed then you can ask questions in this forum.
Q: Are there differences between version 2.1 and 4.0 ?
A: The interface has no changes from AII 2.1 to AII 4.0.

Version: 20060317
Q: Where can i find more information to the AII-MBL-RFID interface ?
A: Have a look on our ICC webpage in the SDN:
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/bc6e21e7-0801-0010-08bc-99931062a3e4 [original link is broken]
Q: What costs are arising when we want our product to be certified ?
A: See also out SDN page under the headline "Price List".
Q: Is there a link/page for the already certified products for this interface ?
A: Sure, have a look on our ICC page under the headline "Certified Solutions"
Q: Who can we ask in case of general question ?
A: Have a look at our general ICC forum:
SAP Integration and Certification Center (SAP ICC)
Of course, if you have urgent requests you can send them also directly to our local ICC's:
ICC Walldorf in Germany: [email protected]
ICC Palo Alto in USA: [email protected]
ICC Bangalore in India: [email protected]
Q: Who can we ask in case of technical questions ?
A: This depends on the state of your certification project.
1.) If the certification contracts have been signed then you can ask in this forum and if this does not solve your question go back to your assigned integration consultant.
2.) When the certification contracts have not been signed then you can ask questions in this forum.
Q: Are there differences between version 2.1 and 4.0 ?
A: The interface has no changes from AII 2.1 to AII 4.0.

How to modify SAP AII XML So that i can able to work with AII DC -2.1 & 4.0

I am new to SAP. I am doing integration work between SAP AII and Sun Java RFID Middleware. Currently Sun RFID 3.0 version supports SAP AII DC 2.1, but I am using SAP AII DC 4.0.
When the Tag commissioning was performed, I am getting an error like "Unexpected element: ConfigureTagFilter".
I need to know following things,
1) Can I remove ConfigureTagFilter tag from AII XML? If possible How to do it?
2) Is there any Compatibility mode option in SAP RFC or AII settings available, so that I can able to switch between AII DC 2.1 & AII DC 4.0 XML formats.
Please let me know how to do this in SAP AII.
Thanks in Advance.

hi,
you can change the XSLT mapping in AII
I did it for some other tools (intermec reader) that work with AII 2.1
and now they work for AII 4.0
Regards,
michal

I need SAP AII-DC 4.0 Command. XSD

Hi,
           I need SAP AII-DC 4.0 Command. XSD file. Please supply the same. Kindly mail me at [email protected]
Thanks in advance.

Thank you Mr.Mikhail Koshkin for your valuable document
I need one more help. I am new to SAP. I am doing integration work between SAP AII and Sun Java RFID Middleware. Currently Sun RFID 3.0 version supports SAP AII DC 2.1, but I am using SAP AII DC 4.0.
When the Tag commissioning was performed, I am getting an error like "Unexpected element: ConfigureTagFilter".
I need to know following things,
1)   Can I remove ConfigureTagFilter tag from AII XML? If possible How to do it?
2)   Is there any Compatibility mode option in SAP RFC or AII settings available, so that I can able to switch between AII DC 2.1 & AII DC 4.0 XML formats.
Please let me know how to do this in SAP AII.
Thanks in Advance.

AII without HUs

Hello,
i have configured an "outbound process" with SAP ECC, AII 4.0 in conection with XI.
The process run, but at the last end, the message from AII to ECC doesn't run.
I use the function adapter "idoc_input_delvry" and the message DELINF.DELVRY05. If i try to test the IDOC with the transaction WE19, i get the error code 51: "Destination HU failed"
I don't want use HU. Can somebody help me ?
thank you !

Hi Martin,
e wo camcoder sa
In that scenario you need to do some modification in the AII .
You hae to basically check that the actiity DEVICE_SEND_FEEDBACK in the Rule defined for your process(ZPACK ) and ensure that the create new HU statement should be removed.
Regards,
Ajit

SGTIN number in SAP OER

Hello Experts,
Our client is planning to implement SAP AII and OER for product traceability. I have some basic questions on the concept. I would like to know in what instance an SGTIN number will be generated in OER. Is that while doing any transaction?. Where that number is stored and its relation with Batch.
Imagine the hand held devices are connected to SAP AII. and I want to post a GR against process order. I will request SGTIN number to OER. OER will generate the number and send it to AII subsequently print a label triggered through AII (I dont know whether this is possible). The scan the label which will automatically post goods receipt from AII to ECC. Is that a right assumption? Will this SGTIN number be sent to ECC as serial or handling unit in GR message or it will reside only in OER?
Thanks
Prathib

Hello Prathib,
1. The GTIN numbers maintained in the ECC reach the AII/ OER systems along with the master data. Once they reach the repository (OER), you may use /AIN/NRADMIN transaction, Select the appropriate object type in the web window opened & create, edit or delete number ranges for that particular object type (in your case GTIN).
2. Yes the GR is posted in the ECC by AII system once the appropriate rule (DLV_CONF_SEND_ERP_COMP I guess ) is executed (usually on loading).
3.The numbers are not particular to just the OER they will be sent to the ECC through the interface EventCaptureNotificationOut using SAP XI.
Regards
Sam

RFID-Alternatives to Handling Units in ERP?

Hi,
During inbound and outbound delivery in SAP ERP, the Ids identifying the items can are stored in Handling Units in ERP. Our customer at hand uses an SAP Industry solution where Handling Units are not supported.
My question is, are there other data containers in SAP ERP to store the required IDs which would be supported throughout all processes?
I do understand that through ERP customizing several ID types are mapped through bit offsets. What I do not understand is where this data ultimately is stored if a document is created and how this data container could be changed
Your support is highly appreciated!
Cheers, Andi

Hi Andreas,
The EPC (IDs) information created in AII is stored in AII only. It is not sent to ERP system with the delivery information. Refer to tables /AIN/DM_OBJECT and AIN/DM_OBJ_CTX in AII where Ids are recorded. Document information is stored in table /AIN/DM_DOC.
Before flexible delivery scenario was intorduced by SAP, this information was stored in ERP in table AIDIDDATA. This has now been discontinued.
You can refer to flexible delivery scenario in service.sap.com/scm for more information on how delivery information is sent from ERP and the ASN is enriched with Ids from AII.
Hope this information helps.
PS: Reward points if helpful.

Folder Setting

Dear All
    I'm training to view the Folder Setting (using the following Steps Content Administratio->KM Content->Toolbox->Folder Settings
    But when click on the Folder Settings the Following error Appears "pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.km.AdminContent/com.sap.km.Toolbox/com.sap.km.FolderSettings/com.sap.km.FolderSettingsAdmin"
In the the Trace Error:
#1.5#0012793BD2DC0050000000E9000027E00003FC7F477A78F3#1122048520351#com.sap.portal.ivs.semantic.iViewService#sap.com/irj#com.sap.portal.ivs.semantic.iViewService#JSC_3#79665####de4482f0faca11d9bc9e0012793bd2dc#SAPEngine_Application_Thread[impl:3]_31##0#0#Error#1#/System/Server#Java###Failed to get application IPropertyContentProvider: #1#com.sap.km.cm.tools.FolderSettingsAdmin#
#1.5#0012793BD2DC0050000000EB000027E00003FC7F477A7D94#1122048520366#com.sap.portal.ivs.semantic.iViewService#sap.com/irj#com.sap.portal.ivs.semantic.iViewService#JSC_3#79665####de4482f0faca11d9bc9e0012793bd2dc#SAPEngine_Application_Thread[impl:3]_31##0#0#Error#1#/System/Server#Java###Failed to get application IPropertyContentProvider: #1#pcd:com.sap.portal.system/applications/com.sap.km.cm.tools/components/FolderSettingsAdmin#
#1.5#0012793BD2DC002500008518000027E00003FC7F47886EF1#1122048521273#com.sap.aii.utilxi.sld.XISubSystem##com.sap.aii.utilxi.sld.XISubSystem######d83898d0fa9111d98c130012793bd2dc#SAPEngine_System_Thread[impl:5]_35##0#0#Error#1#/Applications/ExchangeInfrastructure#Plain###No host name defined in Exchange Profile for sld.J2E.BLEPDES#
#1.5#0012793BD2DC00250000851A000027E00003FC7F4788701F#1122048521273#com.sap.aii.utilxi.sld.XISubSystem##com.sap.aii.utilxi.sld.XISubSystem######d83898d0fa9111d98c130012793bd2dc#SAPEngine_System_Thread[impl:5]_35##0#0#Error#1#/Applications/ExchangeInfrastructure#Plain###No HTTP port defined in Exchange Profile for sld.J2E.BLEPDES#
#1.5#0012793BD2DC00250000851C000027E00003FC7F4788767D#1122048521273#com.sap.aii.utilxi.sld.XISubSystem##com.sap.aii.utilxi.sld.XISubSystem######d83898d0fa9111d98c130012793bd2dc#SAPEngine_System_Thread[impl:5]_35##0#0#Error#1#/Applications/ExchangeInfrastructure#Plain###Error reading from AII properties for sld.J2E.BLEPDES
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.rb_exception.MESS_INVALLD_PARAMETER_VALUE
com.sap.aii.utilxi.misc.api.InvalidArgumentException: Parameter httpPort has the invalid value null
     at com.sap.aii.utilxi.sld.SldUtil.constructHttpsPort(SldUtil.java:345)
     at com.sap.aii.utilxi.sld.XISubSystem.setAccessInfoFromAiiProperties(XISubSystem.java:301)
     at com.sap.aii.utilxi.sld.XISubSystem.setFromAiiProperties(XISubSystem.java:264)
     at com.sap.aii.utilxi.sld.SubSystemFactory.createSldFromAiiProps(SubSystemFactory.java:459)
     at com.sap.aii.utilxi.sld.SubSystemFactory.createXIDomainFromAiiProps(SubSystemFactory.java:223)
     at com.sap.aii.utilxi.sld.SubSystemFactory.createXISubSystemWithoutServices(SubSystemFactory.java:173)
     at com.sap.aii.utilxi.sld.SubSystemFactory.createXISubSystemFromAiiProps(SubSystemFactory.java:125)
     at com.sap.aii.af.service.sld.SLDAccess.getSLDInstanceName(SLDAccess.java:556)
     at com.sap.aii.af.service.cpa.impl.util.SLDReader.run(SLDReader.java:95)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Best Regards
Thanks In Advanced
Pedro Miguel Rodrigues

Pedro
Did you solve your problem? I have a similar problem in my QA environment that also occured in my DEV environment
I solved the DEV problem with EP6 SP11 Patch 3 but this did not seem to fix the problem in QA.
Patrick

No HTTP port defined in Exchange Profile for sld

Hi all,
During the BI and portal connectivity, we successfully executed the template installer, however, we have not yet imported the abap and related sp from SAP note.
After successful execution of template installer or CTC, we ran the supportdesk tool resolved errors and are left behind with two errors as below.
ERROR 1. RED BI Mastersystem
Message:
Error while connecting to BI mastersystem via RFC: Checks related to ABAP information cannot be executed because an outdated version of function module RSPOR_SETUP_CHECK is implemented. Please implement the recent version of note 937697.
Solution:
Check connection properties in Portal Systemlandscape for the property category 'Connector' (Systemlandscape/SAP_BW)
Issue: Now looking at connector properties that are set by CTC are complete and set. Connection Test for both Connector and SAP Web AS Connection are successful, only ITS is neither setup by template nor by us. Please suggest how to resolve this.
ERROR 2. RED Error in Check Class: com.sap.ip.bi.supportdesk.checks.impl.MultipleUserMappingCheck
(Error during retrieval of inverse user mapping for ABAP user 'null': No backend user ID provided for inverse user mapping. com.sapportals.portal.prt.runtime.PortalRuntimeException:...)
Looking at log file server<#>/log/defaultTrace.trc it points the following error:
No HTTP port defined in Exchange Profile for sld.BIW.bcs AND
Error reading from AII properties for sld.BIW.bcs
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.rb_exception.MESS_INVALLD_PARAMETER_VALUE
com.sap.aii.utilxi.misc.api.InvalidArgumentException: Parameter httpPort has the invalid value null
Issue: Checking we find that ICM is running with correct dns and port 8000 (http), only smtp is holding port 0. Where do we maintain http port for sld? Kindly suggest.
Finally the support desk tool is leaving the following checks with status UNDEFINED, would this impact the connectivity?
1.   UNDEFINED Deployed Components
2.   UNDEFINED Export check (PDF lib, ADS, ...)
3.   UNDEFINED Synchronized Clocks on WebAS Java and ABAP
4.   UNDEFINED URLs Prefixes Customized on Both J2EE and ABAP Side
5.   UNDEFINED WebAS ABAP Certificate and Login Modules Configuration
6.   UNDEFINED WebAS ABAP Settings
Looking at support desk tool and RSPOR_SETUP I notice the errors in RSPOR_SETUP appear green in support desktool such as User mapping (step 12) appears green in support desktool but red in RSPOR_SETUP.
Please suggest.
Best regards.

Hi,
If Support desk tool is showing some of the components undefined, than there may be posisbility that your ABAP BI and BI JAVA patch may not in sync.
ABAP BI and BI JAVA works only with specific patch set combinations. I will suggest that please refer to below note and correct the patch level, if required. Once the patch level is corrected, please run the support desk tool again, you will see new picture in support desk tool.
"SAP Note 1013369 - SAP NetWeaver 7.0 BI - intermediate Support Packages"
With Regards,
Saurabh

EPC Searching/Auto-ID Cockpit-Like Functionality

I basically need to programatically do the same thing the Auto-ID cockpit does with regards to searching for EPC observation data using an EPC HEX value as the search criterion. To make a long story short, the idea would be to call the Auto-ID infrastructure system programatically, passing the EPC HEX value and getting the associated data for that EPC in return. Does anybody have any suggestions on the best way to go about this? I know the functionality is there (somewhere) since the Auto-ID Cockpit is doing the same thing- i just can't find any documentation on it.
Any help is greatly appreciated.

Hi Michal,
We did the configuration for the Jco Connection as per installation guide. We got Green LED for both the Jco connections. But when we test the Jco connections using test button, we get an error msg
" <b>com.sap.mw.jco.JCO$Exception: (102) JCO_ERROR_COMMUNICATION: JCO.Client not connected in repository call</b> "
Also, the port for Content Administrator accrding to the installation guide is HTTP port.
http://<YOUR SERVER>:<b><HTTP PORT></b>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
Can you pls clarify this also.
Expecting your reply.
P.S: We are able to launch the SLD using the "Start assigned SLD" button in Content Administrator. But, if we use SLDCHECK from AII server, we get an error msg RFC connections not maintained properly. Is this a problem?
Thanks,
Sankar & Jai Shankar

APL2 From AII to R3

Similar Messages

Maybe you are looking for