APO 5.1 Upgrade

Hi All,
I am working in APO Upgrade project where in , change is required to move from PPM to PDS data structures. Unable to find equivalent tables of PPM to PDS conversion . Tables in PPM are following.. need to replace these..
/sapapo/plan
/sapapo/planact
/sapapo/compalt
I am trying to replace the following code with PDS data structure..
SELECT SINGLE dactid epar1
FROM /sapapo/matmap AS a
JOIN /sapapo/trprod AS b ON amatid = bmatid
JOIN /sapapo/plan AS c ON bplanid = cplanid
JOIN /sapapo/planact AS d ON cplanid = dplanid
JOIN /sapapo/compalt AS e ON bamatid = eamatid
AND bmatid = ematid
INTO (lv_actid, lv_per)
WHERE a~ext_matnr = it_matkey-ext_matnr
AND b~valto >= lv_today "still valid
AND b~trptype = '002' "PPM
AND b~beskz = 'E' "int.production
AND c~cost1 = 10 "preferred line
AND c~state = '1' "plan active
Please let me know if this is possible through tables or using FM /SAPAPO/PPM_GET_PLAN.

Found the answer to the solution

Similar Messages

SCM / APO forum on upgrade

Hi All,
Just to moot a proposal for new forum on SCM or APO upgrade
There are forums for ECC & CRM upgrades
For APO, we have few threads & a good wiki on newer versions
Are there no upgrades happening
Moderators & Guru's please share & enlighten
Acceval team

Hi Andre,
There can be a number of transitional steps to move from SCM with liveCache to ERP/SCM on HANA. The bottom line is that liveCache becomes part of the HANA database so there is no need for a separate liveCache server. SCM on HANA is generally available now. See SAP Note 1825703. I believe the following steps are representative. You'll have to consult with your SAP representative for the exact details.
Steps -> SCM w/ LC -> SCM w/ LC and HANA -> SCM w/ HANA -> SCM on ERP w/ HANA
You don't have to go through each step. I'm not sure when the consolidated ERP/SCM on HANA will be GA.
Best Regards,
Mike

Upgrade APO 3.0 to SCM 5.0 SR2 (requirements in source system)

Hello!:
We want to do and upgrade upgrade APO 3.0 to SCM 5.0 SR2
And we have seen the Guides SCM5.0 SR2 and SCM5.0 SR3, but appears info in the page 26 only about check the software requirements from APO 3.0 to SR3, but we want to check the information about APO3.0 to SR2.
Regards,
Alfredo.

Alfredo,
This is not a easy question, since you are several releases behind on APO. I have done upgrade from APO 3.0 to SCM 4.1 and then subsequently to 5.0 so there were lots of learnings specific to the Projects and develoments. The Setup being different in different industries and companies, there is no one answer to this question. Try the following ...
- Read the Release Notes of SCM 3.1, 4.0, 4.1, 5.0. You will see a Host of New Functionalities - Newer in SNP, PPDS, TPVS, Master Data (PDS along with PPMs).
I do not know what functionality you are live with in APO 3.0.
On the Existing Setup that you may find changed, I remember the following big changes ...
- GUI Changes are galore in master data, less
- SNP Side - Changes in TLB Engine & TLB Prioritization.
                 - Deployment Split Functionality
                 - Changes in User Exits (old code would not work). You will find this painfull if you've implemented User Exits. eg : If you were determining OrderTypes in orders sent from APO to R3. TLB User Exits. Lesser changes in Masterdata userexits.
                  - Newer fields in Master Data (eg : SNP Checking Horizon in Product Master and it's implications on Deployment & TLB. ).
                 - Subcontracting Planning in APO.
- Enhancements in VMI.
- Use of Parallel Processing for all Modules planning.
- Enhancements in Aggregated Planning
- Enhancements in Product Interchangeability.
- Several Newer Functionalities like ICH to make/replace the earlier Collaborative Planning better.
- Master Data several changes (eg : PDS)
- Several improvements in CoreInterface Function and Que Issues. In 4.0 onwards there is new functionality around CIF Postprocessing
- Use of Process Chains to streamline Batch Jobs and especially BI Loads into Cubes and Planning Areas.
- Several enhancements in PPDS (newer heuristics), Alerts
- BW underwent a Major change from BW 2.0 to BW 3.0 to now BI 7.0 which impacts Setup for Demand Planning. eg : The InfoCube got renamed to InfoProviders.
I suggest you start with the Release Notes. Form a List of your Test Scenarios, then Upgrade in your Development and start to Test. Don't plan less, but more time for testing since you are undergoing a several releases change. First start to get your Existing Business Scenarios documented as Test Scripts in Order.
I STRONGLY recommend doing a Technical Upgrade Only (i.e : do not upgrade Major Functionality unless there is no other way). In Summary for SURE SCM 5.0 is a Much better and Stable System than APO 3.0.
Hope this helps. Reward Points If you find it usefull.
Regards,
Ambrish Mathur

Upgradation of BW ....Impact in other systems R/3,SRM,APO,

we want to upgrade BIW 3.1 to enhance performance
Is there any impact on the other systems like R/3(4.6c), SRM(2.0), APO(3.0a)which are integrated along with the existing support packs
Please advice me.
Regards
Arjun

Hi,
I donot know the latest SP in your required Version. But it is always better to go with latest SP in the version we are using. You can easily find it from Service.sap.com
Even for SP implemenation/upgradation in BIW, it is always better to allow the uploads while doing the SP implemenation/upgradation.
With rgds,
Anil Kumar Sharma .P

We are upgrading EHP4,What are the scenarios we will check in ECC and APO

Hi gurus,
We are upgrading (ECC )EHP4
What are the scenarios we will check in ECC and APO, kindly tell me gurus.
Regards
babu

Babu,
We live within a dream. The आत्मन् is real, all else is Illusion. Names are illusion. If DB49 does not suit you, then call me nameless.
Before you even release the software into the test environment, you must perform unit testing. Can every transaction that is used by your company be executed? Does every userexit/enhancement still perform the same task? Does every custom report work the same? All interfaces passing the proper data?
Merely testing the software itself will not give your company any assurance that it will support your business after you go live with it, so after unit testing comes integration testing and user acceptance testing. You must interview Key business users, and from their input you must develop and execute tests for 'business processes'. For example, one common business scenario (which contains many business processes), Order to Cash: Check whether your upgraded systems supports your ability to receive and enter an order, plan the parts, obtain the RM, build the parts ship the order, and book the cash. Or, another Scenario, Procure to Pay: Check if you can plan RM parts, create/release PR, create PO, send PO to Vendor, receive PO in stock, pay invoice, close month for accounting purposes.
These are two major business scenarios in most companies that use ERP. There are hundreds more that can be tested, If you work for a company that cannot afford to have any disruption in their business, then all activities that are normally done by any business user should be tested.
On the SCM side, during an ERP update, you have a smaller task (SAP usually does a good job with backward compatibility with their own modules). BW extractors must be tested. All integration models must be tested. All userexits must be tested. Publishing results/releasing results to ERP must be tested. The list goes on and on depending upon which SCM modules you have implemented.
Regards,
DB49

Support Pack Upgrade for APO 5.0

Hi Guys,
Can anyone update me on what needs to be done from the functional side if we upgrade the Support pack level.
We are upgrading from Support Pack 11 to 16 and are currently in APO 5.0. What precautions and updates we need to do for the same. I would appreciate if some step wise process can be defined, for this. Also would like to know the difference between SPK 16 and 17.
Thanks,
Harsh

Hello Harsh,
Have you checked the Release & Upgrade Info section in the SAP Service portal (service.sap.com). This containa ample information on this.
Thanks,
Mahesh

Create Std Sales order and APO upgrade

Hi Gurus,
I have a test case on "Create sales order (ZSLR)" for which the expected result is" Sales order creation and APO upgrade". I am supposed to write the test steps for the above test case.
Please guide me the test steps on how to do the "APO Upgrade" for a std sales order.
Appreciate your help and suggestions .

Hi Marc,
The ECC sales order display depends on the availability of integration
model and active ATP fields maintained in ECC material master
In APO, the product view display is controlled in Order view
customisation at APO under PPDS
Regards
R. Senthil Mareeswaran.

Upgrade of APO - Dependancies??

Dear all,
We are currently using APO version 3.10, BW version 3.10 and R/3 version 4.6c. We are looking to upgrade all, but were considering APO and BW first. If we were to upgrade to SCM5.0 and SAP NetWeaver 7.1 are there any technical/application implications if we do not upgrade R/3 at the same time?
Any help would be appreciated.
Thank you

Hello Melanie -
Look at the following Link it will give you an idea into what are the technical implications
http://help.sap.com/saphelp_scm50/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000429832&
Hope this helps you,
Regards,
Suresh Garg

Need blogs for SCM/APO upgrade

We plan to do a few SCM/APO upgrade.
The SMP guide and notes are good. However if you can direct me to some blogs on real-world SCM/APO upgrade,
that would be very helpful.
Thanks a lot!

Friends and Experts!
Check this Link
http://www.asug.com/Influence/CurrentCouncils.aspx?InterfaceID=2&InfluenceID=89&TaxonomyId=0
This ASUG Influence Council is working with SAP to address current and emerging business needs related to the SAP Supply Network Collaboration (SNC) / Inventory Collaboration Hub (ICH).
Thanks
Warm Regds...Avi

Hi having a problem upgrading SCM 4.1 APO Live Cache

Hi I am new to SCM and I came into a project that was already started, I am doing a SUM upgrade and its at the upgrade of Live Cache I need to run the report /SAPAPO/OM_LC_UPGRADE_70 and perform all steps in section A. when I try to run the report it comes back "No shared library for the database with ID LCA" I checked LC10 and saw in the Settings that the database is still pointing back to the source system it was copied from. Like I said I walked into this in the middle the they are upgrading from SCM 4.1 to 7.0EHP3 on SQL 2012 and Windows 2012 so they built the 2012 Vm installed the Central services and when they installed the DB it was an attach / detach method and I installed the DB instance. Question should any of the file directories have come with the attach db there are no sapdb in the directories do I just install the live cache and that installs the maxdb and makes the directories /sapdb/ because I see them in the source system? I tried installing the live cache that came with the original system but it had errors.

Hi All,
I went ahead with Option 0 and it asked me for Kernel file and i provided the files.
I checked logs in /sapdb/wrk directory and i see that Installation of SAP livecache finished successfully.
From LC10 i gave database connection name (LCA) and clicked on live cache monitoring and it comes back with an error
Name and Server : LCA - XXXXXXX (XXXXX = Server Name)
DBMRFC Function: DBM_EXECUTE
Command: dbm_version
Error: DBM Error
Return Code : -4
Errror Message: database instance not found.
Application Server: XXXXXX                     ( Windows NT )
1. Connect. test with "dbmcli db_state"
     Error! Connection failed to node XXXXXXX for database LCA: database instance not found
     External program terminated with exit code 2
2. Connect. test with command mode "dbmrfc db_state"
     Name and Server     : LCA - XXXXXXX
     DBMRFC Function     : DBM_EXECUTE
     Command             : db_state
     Error               : DBM Error
     Return Code         :         -4
     Error Message       : database instance not found
3. Connect. test with session mode "dbmrfc db_state"
     Name and Server     : LCA - XXXXXXXX
     DBMRFC Function     : DBM_CONNECT
     Error               : DBM Error
     Return Code         :         -4
     Error Message       : database instance not found
4. Connect. test with "native SQL" ( LCA )
     For detailed information, see the developer trace for work process:          1
From the OS level i gave command dbmcli db_enum and i get OK as reply.
Can someone please let me know how to resolve this issue.
Regards,
Ershad Ahmed.

WEB UI Status profile TPM transfer to APO

Hi,
We try to upgrade our CRM system from 4.0 to 5.2 at a customer. Now, the following problem came up with the transfer of promotions to APO;
We created our own status profile (ZTPM) which we configured in a way so that promotions were transferred to APO (This worked in CRM 4.0).
When we created a promotion and put the status to Unconfirmed (which in CRM 4.0 transfers the promotion to APO) and save, the necessary Bdocs are created and said to be fully processed. When you look in the error log for Bdoc Type MKTPL_MKTELEM, click on error and long text, it says that the promotion does not have a status which permits to be transferred to APO.
(Error message from SAP: BDOC status does not allow transfer to APO; Message no. CRM_MKTPL_APO_INT110 Diagnosis: The promotion has a status which does not allow it to be transferred to APO. Procedure: Check the status settings and either change the settings to allow the transfer to APO or change the status.
In customizing however, we have defined that for user status Unconfirmed (E0004) the business transaction CAPO is allowed. The same applies for status Released. Both statuses we have tested.
What happens in the WEB UI concerning the status profile? Has anything changed compared to CRM 4.0?
I hope someone can help me out. Points will be rewarded if we are helped, because we are dealing with a show stopper here!
Best regards,
Simone Schuitemaker

Hi Simone,
I am posting this replay just for other people:
In this case the transfer was failing because of two active implementations of BAdI CRM_MKTPL_APO_INT. There should be at most one active implementation for any BAdI.
Best regards,
Mira

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

Unable to load Falt file in our new Upgrade BI 7 system ?

Hi all,
I am an APO DP consultant and we have recently upgraded from SCM 4.1 version to SCM 7.0. As Apo had Build in BI system and SCM 4.1 uses BI 3.5 and now SCM we have upgraded to BI 7.0.
While testing to uplaod sales data into infocube from flat file I an gettor error with message update delivered error code 7 and message no is RSAR119 and there were no further details . We tried to chenge the target to PSA and it worked and not working loading to cube.
I reactivated transfer rule and update rule but still not working . Can anyone suggest solution for this?
Edited by: KVerma on Jul 10, 2009 8:54 PM

Hi
I also had this issue recently while testing upgrate to SCM 7.0. Check note 1152453.
Rub Program RSDG_CUBE_ACTIVATE, Select your cube and run. This should resolve your issue later I would suggest to activate all cubes.
You can also run job RSDD_RSTMPLWIDTP_GEN_ALL this wil activate all cubes and write programs.
Thanks
Siva

Upgrade to SCM7.0 DP info objects (Characteristics) long/short text issue

Hi All,
We have upgraded from SCM4x to SCM7.0. The info objects characteristics customized long and short text is not updated in SCM 7.0.
Example: Info object 9ALOCNO standard long/short text is APO location. But in SCM4x they have changed to Plant. After upgrade this text is set to APO location, not the plant. Like this many chars text have been changed to SAP standard.
When I try to change text of info object creates transport request.
Is this standard behavour when we upgrade?
Please share your thoughts and let me know for more information.
Thanks,
Sreeni

Sreeni,
With every upgrade the customization is lost. We will have to make a list of all customized objects and make the change again in the upgraded system.
Hope this helps.
Thanks
Mani

APO 3.1 to SCM 5.0 UPRADE ERROR IN PHASE SQLSCREXE_DELSHDTB

Hi
We are getting this error during the upgrade phase SQLSCREXE_DELSHDTB.
STEP 488 of 493.
ERROR: during execution of script :DELDB6TB.XQL. Error found in log
file TPSQLSTD.OUT and DELDB6TB.LOG
Contents of TPSQLSTD.OUT is as below:
hostname:SIDadm 64> pg TPSQLSTD.OUT
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 14964 at 20080929220715
ENV <0x4015a1f8>:
SHLIB_PATH=/usr/sap/SID/SYS/exe/run:/opt/java1.4/jre/lib/PA_RISC2.0:/opt/java1.4/jre/lib/PA_RISC2.0/server:/opt/java1.4/jre/../lib/PA_RISC2.0:/oracle/SID/920_64/lib:/usr/sap/SID/SYS/exe/run
ENV <0x77ff04ef>: ORACLE_PSRV=SID
ENV <0x77ff04ff>:
PATH=/oracle/SID/102_64/bin:/sapdb/programs/bin:/usr/sap/SID/SYS/exe/run:/usr/bin:/opt/ansic/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/nettladm/bin:/opt/fc/bin:/opt/fcms/bin:/opt/upgrade/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/hparray/bin:/opt/resmon/bin:/opt/pred/bin:/opt/ignite/bin:/opt/atok/bin:/opt/egb/bin:/opt/vje/bin:/opt/aCC/bin:/opt/langtools/bin:/opt/hpnp//bin:/usr/sbin/diag/contrib:/opt/graphics/common/bin:/opt/cfg2html:/opt/perf/bin:/opt/scr/bin:/opt/imake/bin:/opt/hpnpl//bin:/opt/java1.4/bin:.
ENV <0x77ff070a>: NLS_LANG=AMERICAN_AMERICA.WE8DEC
ENV <0x77ff0736>: ORACLE_BASE=/oracle
ENV <0x77ff078f>: dbs_ora_tnsname=SID
ENV <0x77ff07a3>: ORACLE_SID=SID
ENV <0x40159df8>: DIR_LIBRARY=/usr/sap/SID/SYS/exe/run
ENV <0x401516a8>: dbs_ora_schema=SAPR3
ENV <0x77ff0853>: JAVA_HOME=/opt/java1.4
ENV <0x77ff089d>:
ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/dataENV <0x77ff08f0>:
ORACLE_HOME=/oracle/SID/102_64
ENV <0x77ff092b>: dbms_type=ORA
ENV <0x401512a8>: auth_shadow_upgrade=0
EXECUTING /usr/sap/SID/SYS/exe/run/tp (tp)
pf=/usr/sap/put/bin/DEFAULT.TPP execdbscript SID -x DELDB6TB.XQL
This is /usr/sap/SID/SYS/exe/run/tp version 370.00.09 (release 700)
ERROR: tp_exec_dbscript: cannot open /usr/sap/put/bin/DELDB6TB.XQL
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
Warning: Parameter STARTDB is no longer used.
Warning: Parameter STOPDB is no longer used.
TPERR- cannot open dbscript /usr/sap/put/bin/DELDB6TB.XQL
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see SLOG for more details)
Process with ID 14964 terminated with status 212
(EOF):
Contents of DELSHDTB.LOG log file
hostname 66> pg DELSHDTB.LOG
1 ETQ201XEntering upgrade-phase "SQLSCREXE_DELSHDTB" ("20080929220715")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = 'xx', GwService = 'sapgwxx'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ380 computing toolpath for request "TP_EXECDBSCRIPT"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SYS"
4 ETQ383 translates to path "/usr/sap/SID/SYS/exe/run"
4 ETQ276 Executing SQL-script "DELDB6TB.XQL"
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/SID/SYS/exe/run
4 ETQ399 ext. env.:
SHLIB_PATH=/usr/sap/SID/SYS/exe/run:/opt/java1.4/jre/lib/PA_RISC2.0:/opt/java1.4/jre/lib/PA_RISC2.0/server:/opt/java1.4/jre/../lib/PA_RISC2.0:/oracle/SID/920_64/lib:/usr/sap/SID/SYS/exe/run
4 ETQ399 2008/09/29 22:07:15: put_execute: (tp) forkpid:14964
2EETQ278 Errors during execution of SQL-script "DELDB6TB.XQL"
1EETQ203 Upgrade phase "SQLSCREXE_DELSHDTB" aborted with errors
("20080929220716")
We could not find the file DELDB6TB.XQL in /usr/sap/put/bin directory.
SAPup version we are using is
hsotname 69> SAPup -V
Enter the path of your upgrade directory [/usr/sap/put]:
Upgrade directory =
Re-executing SAPup with adapted environment.*
This is SAPup version 7.00/2, build 24.109
Please help on this as our APO upgrade is stuck on this.
Appreciate any help.
Regards,
Sandeep.

Hi Sandeep,
Seems like access issue to the user for /usr/sap/trans/log directory.
please grant 777 rights to this folder. also, before continuing try to restart system as may be ur SLOG file is holded by any process.
regards,
nitin

APO 5.1 Upgrade

Similar Messages

Maybe you are looking for