WEB UI Status profile TPM transfer to APO

Hi,
We try to upgrade our CRM system from 4.0 to 5.2 at a customer. Now, the following problem came up with the transfer of promotions to APO;
We created our own status profile (ZTPM) which we configured in a way so that promotions were transferred to APO (This worked in CRM 4.0).
When we created a promotion and put the status to Unconfirmed (which in CRM 4.0 transfers the promotion to APO) and save, the necessary Bdocs are created and said to be fully processed. When you look in the error log for Bdoc Type MKTPL_MKTELEM, click on error and long text, it says that the promotion does not have a status which permits to be transferred to APO.
(Error message from SAP: BDOC status does not allow transfer to APO; Message no. CRM_MKTPL_APO_INT110 Diagnosis: The promotion has a status which does not allow it to be transferred to APO. Procedure: Check the status settings and either change the settings to allow the transfer to APO or change the status.
In customizing however, we have defined that for user status Unconfirmed (E0004) the business transaction CAPO is allowed. The same applies for status Released. Both statuses we have tested.
What happens in the WEB UI concerning the status profile? Has anything changed compared to CRM 4.0?
I hope someone can help me out. Points will be rewarded if we are helped, because we are dealing with a show stopper here!
Best regards,
Simone Schuitemaker

Hi Simone,
I am posting this replay just for other people:
In this case the transfer was failing because of two active implementations of BAdI CRM_MKTPL_APO_INT. There should be at most one active implementation for any BAdI.
Best regards,
Mira

Similar Messages

Campaign - TPM with out a Status Profile

HI All ,
How will a campaig or TRade Promotion Behave , if there is no Status Profile assigned to it ? Currently i have faced a situation where there is no assignment of status profile to campaign or TP via 'TYPE ' . However i could see System statuses assigned to these promotions !!!
How are these syste, statuses managed with out assignment of user status ?
Also currently there are promotions with system Status CREATED and LOCKED and we are unable to EDIT them .Kindly let me know , how we can edit these promotions .
Many Thanks,
Smita.

Hi Smita,
There are two types of statuses. System status and User status.
Since you have not assigned any User status profile, so the document is under control by the system status.
And once the document is in Locked system status, it cannot be further edited as per the standard behaviour of that document.
You would need to assign a status profile as per your requirement and in that you can achieve whatever status flowchart you want to achieve. Hope this helps.
rgrds,
Randhir

How to assign status profile to Business partner

Hi Gurus,
in sap crm 7.0 web ui
i want to restrict particular user group to only" see" accounts it means only "display" view this we can achieve through status profile but how it is configured i don't know...can somebody help me understand it.
Thanks,
Gaurav
Edited by: wwgauravshah on Nov 4, 2011 2:21 PM

hi PP,
in sap crm7.0 web ui
1.i have a requirement that once the account is created manually one at a time and while saving bp, a "opportunity"/lead transaction should get created automatically, this we can achieve with the help of action workflow ...can some body tell me how to configure it...exactly where we can assign action profile to BP.
2. once sales manager makes any changes to BP master, change update should trigger action workflow to inform all employee responsible automatically about changes.
please help me it's critical....
Thanks,
Gaurav

Status profile in PO

Dear All,
My requirement is how set up Status profile in PO header level like in SD Module.
My requiremnt is not fulfilled with Realse stratagy concept in PO.
Kindly guide me.
With Regards,
San Rao.

Dear,
Please check:
http://web.mit.edu/sapbiz/docs/Explanation%20of%20Status%20Management%20functionality%20v3.doc
http://help.sap.com/saphelp_cpro31/helpdata/en/9c/139a8f4f00e9498dee6c488295dc1b/frameset.htm
Regards,
Syed Hussain.

Authorization Check in Status Profile

Hello All,
I'm trying to restrict "Closed" User Status to some users in Service Ticket Transaction of IC Web Client.
Here are the steps that I followed.
1) Created a Authorization Key - "TEST"
2) Assigned the "Authorization Key" in the Status profile for all other User Statuses except "Closed" Status.
3)Created a new role in PFCG
4) Under "Cross Application Auth Object" -> Status Management for the Authorization Object B_USERSTAR I entered the following detais.
- Activity - All Activities
- Authorization Key - TEST
- Object Type - COH, COI
- Status Profile - Our Status Profile
So, I expected the Users in the new Role not to have the authorization to "CLOSE" the status.
But it is not working as expected. Did I miss anything?
Please Advice,
Thanks in Advance,
Points will be rewarded.

Hi Meghana,
Check the profile and roles attached to your user profile. SU01
create a new role using transaction : PFCG. and attach the required authorization object: TEST.
Assign the user.. check the compare user consistency..
Do all this and then you test it with both kind of users, with and without this role.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Status profile (T code BS02)

Hi experts,
Which status profile control MRP requirements? If no, how to configure a new business transaction related to MRP requirements?
Pls advise. Thx.

Hi Lakshmipathi,
Thx for your valuable advice. I'm sorry that I have not clarified clearly.
Here the status profile is to control whether sales orders can be processed further. After reviewing the process, I found there are two issues:
1. How to prevent sales orders from transferring MRP requirements until the status profile is set as "ok".
2. How to make the status profile validate for the specific plant (B).
Background: MTO scenario. The status profile is assigned to the order type ZTA1. ZTA1 can be created against plant A, or B.
Request: Customer just reviews the orders against plant B by using status profile. In other words, Those orders cannot transfer MRP requirements when order creation. Until clicking "ok" in the status profile, the orders can automatically transfer MRP requirements.
My comments:
1. Any chances to add new business transaction in status profile? Except MRP requirements, the standard status profile can control delivery creation, etc.
2. Any better solutions to control MRP requirements transfer? Orders against plant A require MRP requirements transfer once saving orders. But, plant A & B uses the same order type, i.e. the status profile is valid for those two plants. Moreover, many orders are already created in the system.

Production orders without header material transfer to APO

Hi,
for our process it's necessary to transfer dependent demands from rework production orders (without header material) to APO because the ATP check for the component take place in APO. In standard there is no way tor transfer such orders to APO. Only one possible solution is to add during order transfer a dummy material in order to trigger the transfer to APO. Is there anybody that have already used this???
Best regards
alex

Hi JJ,
1. Reference Operation Set - t-code CA11. In the initial screen, enter description, plant - xxxx, usage - 1 & status - 4, unit of measure - same as the material for which the routing is to be used (eg - EA or KG etc).
Click on operations tab, enter control key, work center, operation description.
2. Settlement - When you enter the basic details in co07 like description, basic qty, dates, the system will take you to the settlement screen where you need to enter the settlement receiver. Here you specity CTR for cost center or G/L for G/L account, you then have to specify the corresponding cost element number & also the % of settlement, which is normally 100%. You can also access this by clicking on header - settlement
Hope the above answers your query. If additional info is required, revert back.
If helpful award points
Regards,
Vivek

Status profile for Userstatus

Hello all,
can any one share with me any custom configuration doc for user statuses.
[email protected]
thanks and regards,
Muralidhar Prasad.C

Hi,
Below are some customization for status management:
Status Management
Use
Status Management allows you to control whether documents are visible to particular user groups. The system uses status management in the approval process.
Prerequisites
The status management service must have been activated for the repository in which the documents are stored. This setting is made by an administrator.
Features
The system sets the status automatically if you carry out an action, for example, if you send a document to be approved before it is published (see Publishing with an Approval Process).
The status of a document is displayed in its Details dialog box. A document can have the following statuses:
Status
Visibility
In Progress
Only visible to authors (users with write permission) and users with the service permission Approver Administration.
For Approval
Only visible to authors (users with write permission), approvers, and users with the service permission Approver Administration.
Rejected
Only visible to authors (users with write permission), approvers, and users with the service permission Approver Administration.
Released
Visible to all users with read permission.
Archived
Only visible to authors (users with write permission) and users with the service permission Approver Administration.
Status Management in Business Transactions
Use
You can use the general SAP Status Management when processing business transactions.
You can document the current processing status of an object (for example, a sales order), using status management. The current object state can consist of a combination of individual statuses. Any number of statuses can be set for an object.
The system statuses Open and Do not distribute and the user statuses Quotation created and Do not print can be active simultaneously in a quotation.
Each status fulfills two functions:
·        It informs you that a specific status has been set (for example, the quotation was released).
·        It specifies which step you can or cannot take next (for example, release is allowed).
If a business transaction is executed, this can set or delete one or several statuses for the relevant object. The switch between status and transaction can be portrayed as follows:
Statuses are portrayed in the system in two different ways:
·        As 30 character text
·        As 4 character abbreviation (only in status profile)
Both methods of portrayal are language-dependent.
There are two types of status:
·        System status: Status that is a status set by the system, which informs the user that the system has executed a specific business transaction on an object. You can only influence this status if you execute a business transaction that changes the system status.
If you release a quotation, the system automatically sets the system status to Released.
However, there are also some system statuses in CRM that the user can set or reset as he wishes, for example, Do not distribute. These statuses are defined in the CRMC_STATUS_PROC table.
·        User status: Status that you set, that you can create as additional information to the existing system status. You define a user status in a Status Profile that is created in Customizing for business transactions. You can define and activate as many user statuses as you wish. A status profile can then be assigned to the following in Customizing for business transactions:
¡        To a transaction type (for header status)
¡        To item categories (for item status)
A status profile can be assigned to several transaction types and item categories.
System status and user status influence the business transactions in the same way.
The header status is independent of the item status. One exception is the status Completed. If all items have the status Completed, the header status is also set to Completed.
Integration
A business transaction is not a static object, but it has its own life cycle, which starts when it is opened and ends when it is completed. During this time, different business transactions change the business transaction. It is, for example, forwarded for release or set to completed.
There are four system statuses that represent the life cycle of the business transaction:
·        Open: has been recently created and not yet processed (for example, contract from the Internet)
·        In process: administrator is clearing up questions
·        Released: contract is complete and legal. Follow-up processes can be started (printing, billing, distribution, releases and so on)
·        Completed: All actions directly linked to contract are completed
·        Closed: all actions indirectly linked to the contract are closed (for example, from R/3: batch run to actual costs)
Prerequisites
If you want to display and maintain the user statuses, you need to have maintained a status profile and assigned it to the relevant transaction types and item categories. To do this, go to Customizing and choose Customer Relationship Management ® Transactions ® Basic Settings ® Status Management. You have made the assignments in the activities Define Transaction Types and Define Item Categories.
Features
You can set and delete a status. Statuses that can be set and deleted always reflect the current document situation. However, the system only displays the statuses for setting that can actually be set, with reference to the current transaction status.
The following functions are available to you at header level:
·        Display of system and user status
¡        You have maintained a status profile: The system displays the user status that is assigned a status number, as well as the user status without a status number. The system statuses are displayed separately from the user statuses.
¡        You have not maintained a status profile: Only the system statuses are displayed.
The statuses that are not active are displayed for selection. During selection, the corresponding system status is executed according to the settings in the control table.
·        R/3 transfer and R/3 status: Display of distribution status to SAP R/3 and other statuses for the business transaction in SAP R/3
·        System status / user status: detail view of the individual status area with the option of setting and resetting the status
·        Total item status: Overview of statuses at item level, such as inquiry, quotation, rejection and block status. The individual status lines are only shown if they are relevant for this transaction type
The following functions are available to you at item level:
·        System status / user status: you can set and reset statuses with restrictions.
·        Block / reason for rejection: you can reject an item or set a billing block. You must select a reason in both cases. You can also set a delivery block and credit block
Specifics for CRM Enterprise and Interaction Center
The following functions are also available to you:
·        You can lock or cancel all items at header level. You can set a billing block or cancellation for all items. This is a kind of fast setting of the flag at item level.
·        You can display the distribution status to SAP R/3 at item level.
Specifics for the SAP GUI
You can display a status analysis. If you would like to analyze a problem individually, and would like to know for example why the system does not display a specific status for setting, you can use the status analysis to call up a technical analysis function.
Specifics for Channel Management
The channel manager can set all user status values, while partners can only set the status values that are relevant for them. This relevance is determined via Channel Management-specific authorization keys. You can find further information in the Implementation Guide under Customer Relationship Management ®Transactions ® Basic Settings ®Status Management ® Define Status Authorization Keys..
Check out the relevant link:
http://help.sap.com/saphelp_crm50/helpdata/en/73/29943a7acb9023e10000000a114084/frameset.htm
Thanks,
Samantak.
Rewards points for useful answers.

How to restrict status profile for sales order.

Dear Friends,
Pl suggest me for follwoing scenario
►     As per business process for tender/ institutional sales and exports, the order is complete once the complete delivery and invoicing for the same has been performed.
►     It was also observed that a sales order may be modified (material, quantity, price etc) even after complete invoicing of the same has been performed in SAP.
     The requirement is Possibility to enable a control to restrict any amendments to the sales order after complete delivery and invoicing will be explored as per business requirements.
Is there any solution above scenario without writing any code.
Regards,
Atul
Edited by: atul thakur on Oct 28, 2009 5:09 AM

Mr Atul,
My understanding is, you don't want your user to be able to change the pricing and order quantity once the order is complete, i.e Delivered and Shipped.
The status profile will not help you in the above scenario, Price/Quantity changes will not come up as Business transactions that can be controlled at Status profile.
Standard SAP restricts the price changes to a completed item of the order, so no need to worry about this.
But order quantity can be increased any time.
So to restrict the user to increase the order quantity you need to use the User-Exits that SAP provided.
Use the MV45AFZB user-exit program and form FORM userexit_check_vbap to code this.
Hope this helps you.
Regards,
Aj.

Workflow for Sales Order Release via Status Profile

Dear all,
i want to make a workflow for sales order which have 4 User Status in One status profile.
Once Event triggered for sales order
1.   Mail should go to main authority with sales order number.
2. Once authority will do some changes in the required field then he/she changes
     the user status-1 from defauts as per line Item and mail should go to department no-1 (Head authority).
3. Once again same changes in sales order but now user status-2 from user status-1
     as per line Item and mail should go to department no-2 (Head authority).
4. Once again same changes in sales order but now user status-3 from user status-2
     as per line Item and mail should go to department no-3 (Head authority).
5. Once again same changes in sales order but now user status-4 from user status-3
     as per line Item and mail should go to department no-4 (Head authority) .
and parrally for each changes of Status mail should also go to User (Event Creator).
6. Finally mail sholud go to User as you are permitted to do next business transaction for this sales order
Please tel me the process as i am very new this topic and i am always going to stuck in Binding.
please help me out.
Thank You

Hi Neeraj,
First of all start with SWELS and SWEL T-Code to check if any standard event is getting triggered or not. If event is getting triggered, then use the same event to trigger the workflow; otherwise create a custom event of BO and use the same to trigger the workflow.
Hope you are aware of T-Code SWO1 and delegation of BO. The BO used for your requirement will be BUS2000115.
As you want the workflow to get triggered only for one status profile and one of its status, so use check function module. There set the condition for you status profile and status.
The FM which you will be using the most is CRM_ORDER_READ. To read the status, you can also use CRM_STATUS_READ_OW.
Now simply make the approval steps in the workflow using activity. In the activity, you can use the standard method USERSTATUSPOPUP to send the workitem for approval. In each step use the same activity with different agents as approvers.
Just go with these things and let me know if you get stuck up somewhere.
Regards,
Guddan

How can I use two "Status profile" for two categories of users?

Hi friends,
I tried to configure two categories of users :
1 - First category (User1) can process the message and access to the standard Status profile (SLFC0001),
2 - The second category (User2) can process the message using another status profile (ZSLFC001).
To do this, i process like following :
1 - I created ZSLFN autorization key by copying of SLFN (Tcode :BS52).
2 - I created the Status Profile "ZSLFC001" by coping the SLFC0001(TCode : CRMBS02).
3 - I suppress some user status (ex : send to sap) and I replace SLFN autorization key by "ZSLFN"
4 - I created Transation type "ZLFN" assigned to ZSLFC001 status profile.
5 - I created a ZSAP_SUPPDESK_PROCESS rôle and I set the ZSLFN as authorization key in "B_USERST_T" and in "B_USERSTAT". This role is affected to the User2
Unfortunately, the User2 see and access to the "Send to SAP" user status. I think that the status profile ZSLFC001 is not used!!!
Tank you for your help,
Samad

Hello Xavier,
I changed the Process Type in DNO_CUST04, and I had a error message : "The system could not create the message because of an RFC connection "NONE " error Message was not created".
Furthermore, The change of process type will affect all users.
I think that there are two possibilities :
- Using process type (SLFN or ZLFN) according to the user processor,
- or using the same process type (SLFN) and according to the processor to load the appropriate "status profile".
Please find below more informations about the role:
- the Manually   Status Management: Set/Delete User Status                    B_USERSTAT
   Activity                  :    01, 06
   Authorization key   :    ZSLFN
   Object Category     :     *
   Status Profile         :    *
Thank you
Best regards
Samad

Different user status profile for network header and activities

Hi everyone!
Is there any way to define different user status profile at network header level and at network activity level? As far as I know, it is only possible to enter a user profile at network type level, and both netwok headers and activities use the same statuses. Does it work this way?
Thanks!
Regards.
Edited by: Thalos on Jul 2, 2011 12:27 AM

Hi Punith, Hi abdul!
Thanks for the reply!
I've gone through the OPSC, but the thing is that here you define a user status profile at network plant level. But I need to define it at network activity level.
The reason why I need this is because we have types of activities. We use network activities for client activities, for internal activities, to identify and follow-up risk management, etc. Each group of activities -since they have different usages- has different user status associated. But as I don't have any way to assign different user status profiles, all the activities have the same statuses, although they will only use some of them.
Thanks!
Regards,
Thalos.

Error in RFx with user-specified status profile

Hi experts,
I am having an issue in SRM 7.0 creating status profile for RFx.
When I try to create a new RFx, I get an error screen with message "Status profile ZCCP is not allowed for "Bidding Header""
In order to configure this, I went through the steps described in SAP Library:
1- Define user-specified status profiles in Customizing for Supplier Relationship Management under SRM Server->Cross-Industry Functions->Application Settings->User-Specified Status->Create Status Profile for User-Specified Status:
I created status profile ZCCP with the following data:
10     SUSP     Suspended     10     90     1     1
90     HABI     Abilities 10     90     1     1
and I assigned the status profile to object type "Bid Invitation Header (PS_BBP)"
2- Assign user-specified status profiles to procurement documents in Customizing for Supplier Relationship Management under SRM Server->Cross-Industry Functions->Application Settings->User-Specified Status->Assign User-Specified Status Profiles to Purchasing Documents
I created a new entry with:
BUS2200     H Header     0     ZCCP
3- Assign user-specified status profiles for each transaction type in Customizing for Supplier Relationship Management under SRM Server->Cross-Application Basic Settings->Define Transaction Types
I assigned the status profile ZCCP to all relevant operation types of obj. type BUS2200.
Does anyone know where this went wrong??
Thanks in advance!
Regards,
Joã

Hi joa
http://help.sap.com/saphelp_srm70/helpdata/EN/e8/70ff4187526430e10000000a1550b0/frameset.htm
You can use Status Management for records and documents. In Customizing, define the status values and the permitted sequence of these values. Users can then set these status values as attributes for records or documents.
The following Customizing steps need to be performed for Status Management:
·        Status value definition
To perform this step, choose IMG activity Customizing for Status Management -> Define Status For more information, see the online documentation for the IMG activity.
Status profile definition
To perform this step, choose IMG activity Customizing for Status Management -> Define Status Profile. For more information, see the online documentation for the IMG activity.
Status network definition
To perform this step, choose IMG activity Customizing for Status Management -> Define Status Network. For more information, see the online documentation for the IMG activity.
·         Assignment of a status profile to an element type
For element types whose elements you want to use Status Management for, assign an existing status profile to connection parameter STATE_PROFILE_ID. (The connection parameter is only offered for records and documents.)
Subsequently, users will be offered the attribute Status in the attribute maintenance dialog box whenever they edit the elements in question. Input help contains the status values that you have created.
If you want to use Status Management for the API, you require the following authorization objects: S_SRM_STAT, S_SRM_ST_P and S_SRM_ST_N.
br
muthu

Solution Manager Service Desk - Status Profile

Dear Experts,
I have implemented External Service Desk message forwarding and its working fine. I can see "Send to External Service Desk" function under the ACTION node and when I choose that and save the message goes to the external SAP Service Desk (VAR).
I have the following questions.
1) I need to create a new status under the status profile SFLN0001 as "Sent to External System". If I do that what should I select as the transaction (business transaction @ the last column when I go though Transaction: CRMBS02).
2) When I forward the message to the external service desk then the Status wont get transferred to the external service desk but everything else goes. What could be the problem ? (Changed status wont get updated once synchronized with the external help desk).
Thanks a lot in advance.
Best Regards
Kushan

Dear Kobayashi,
Can you please help me to understand what you have said little bit more.
I have implemented the note : 1388227
Note talks about manual mapping.
Should i just do a mapping in Alternative Value Mapping (1) for "SAPUserStatus" and "Copy Value" for incoming and Out going ? would that be enough ? I did that in both the SDs but didn't work
how do I do this blow mentioned activities ? could you please help me to understand ? where should I define these mappings ? where do I have to specify this "E0001SLFN0001" ??? could you please elaborate this little more in steps as I'm new to this ?
How should I do this "Prior to the mapping, the value with the ID of the status and the status profile is filled" ???
and also this "The status must also be mapped here in the format <status ID><status profile> (for example, E0001SLFN0001)" ???
from the note 1388227 -
Outbound processing:
The user status is transferred as an additional attribute (parameter IctAdditionalInfos) with the attribute name (AddInfoAttribute) "SAPUserStatus". For this, it has to be included in the value mapping of the external interface. Prior to the mapping, the value with the ID of the status and the status profile is filled (for example, E0001SLFN0001).
Inbound processing:
When the attribute "SAPUserStatus" is transferred and the mapped value is not initial, the user status of the message is set to this value. The status must also be mapped here in the format <status ID><status profile> (for example, E0001SLFN0001).
If a user status is not transferred, or the mapping returns an initial value, the logic described above for setting the status based on the executed operation is carried out.
end of the note 1388227 -
Appreciate if you could kindly help me once again
Thanks and Regards
Kushan

User status profile in Q-info record not updating on UD

Hi All,
My required scenario was, delivery of a material from a vendor must pass through inspection series
u2022     Model
u2022     Preliminary
u2022     Regular delivery
For that,
1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot.
Kindly let me know where I am wrong.
Regards,

Hi,
The problem is due to missing authorization object :B_USERSTAT".
Assign this authorization object in your id/role and give necessary values in the fields (activity, authorization key, object category and status profile) and then carry out the transaction again.
Thanks
SUMIT.

WEB UI Status profile TPM transfer to APO

Similar Messages

Maybe you are looking for