APO DP - table /SAPAPO/FCST_LC1 question

I am using APO DP V5.
I am using lifecycle planning in APO DP.
Table /SAPAPO/FCST_LC1 contains assignments for lifecycle planning.
But what is meaning /use of field 'MERKMAL GUID' in this table?
Thanks,
Bob Austin.

Dear Bob Austin,
SAP uses GUIDs while storing the data in the database. Hence, it will generate a guid while inserting the data and will use this for future reference instead of the actual object.
For example, if you look at the table /SAPAPO/MATKEY there will be two fields MANTR and MATID (GUID of Product). SAP uses this MATID instead of MANTR for storing PO, demand data etc.
Regards,
Naveen.

Similar Messages

Reading table: /SAPAPO/AM_ALERT or using FM: /SAPAPO/AMPLLP_SDP_ALERTS

Hello all,
I am trying to build a logic that retrieves the database alerts from the table: /SAPAPO/AM_ALERT.
Problem is the mapping of the OBJECT ID's on this table where I encounter some for which I cannot find a correspondence.
Currently I have the following:
OBJECT ID1 = Macro Book
OBJECT ID2 = Data view
OBJECT ID3 = ???
OBJECT ID4 = ???
OBJECT ID5 = ???
OBJECT ID6 = ???
This fields have a content with some ID. I have tried to check either this ID's are the material ID from /SAPAPO/MATKEY or the location from /SAPAPO/LOC but there is no findings.
Does anyone know the correct mapping and how to properly read the table?
This is because I would need to filter the database alerts retrieved from this table by product/location...
As an alternative does anyone know about how to correctly populate the import parameters of FM: /SAPAPO/AMPLLP_SDP_ALERTS?
I believe this would also be an option to read the database alerts.
Thank you all.
Joao

AAL,
I have never tried to delete alerts under the condition where there are several million entries, so I cannot speak from memory. I had a similar problem once with BackOrder Processing logs, which caused me all kinds of grief to reorg....
If you have an old version of APO (3.1 and previous) there are some notes that may be helpful. Search on OSS under /SAPAPO/AMON_REORG. Particularly http://service.sap.com/sap/support/notes/513553. These problems have mostly been corrected in later versions.
As far as your question, the two 'times' you asked about refer to the record creation date. Records that are older than the absolute date/time will be deleted. Relative Date time refer to 'difference from today'. I would start with a very old value under 'absolute', say around the date that your first alerts were created. To avoid session timeout issues, I would create a variant which selected only the oldest records, and then run in background. I would try first to select only one alert monitor application, preferably one that has the smallest number of records, to start. Once these are fully reorg'ed, move to another A/M application.
For internal table storage, there are settings that your Basis Team can make, that may improve the situation. Print the error log and take it to your Basis team.
Best Regards,
DB49

How to populate customer specific field data in table /SAPAPO/ORDFLDS

Dear Gurus,
I have explained in detail about the problem we face. I guess persons who has implemented enhancement: /SAPAPO/RRP_IO_COL in their system can help me out.
Background:
Purchase requisitions in APO is created by an idoc that comes from a legacy system using BAPI CALL FUNCTION 'BAPI_POSRVAPS_SAVEMULTI3'.
Business Requirement:
I have a business requirement where I need to populate an additional data 'Original delivery date' from the idoc during PR creation in Product view.
Development:
To achieve the above requirement, we are following the below procedure in our development system.
1. We are using enhancement: /SAPAPO/RRP_IO_COL, method: RRP_USEX_COLS_FILL_01 and RRP_USEX_COLS_GET_TEXT_01 to display an additional field 'Original delivery date' in /sapapo/rrp3 - elements view. This field is restricted to Purchase requisition (Order category: AG) only. We are planning to populate the additional data 'Original delivery date' in this customer specific field and store it in table: /SAPAPO/ORDFLDS at the time of PR creation.
2. Table: /SAPAPO/ORDFLDS is appended with the 'customer specific field'.
3. We couldnt find a document on how the data can be populated in table /SAPAPO/ORDFLDS.
4. How to polulate the live cache data in the table '/APAPO/ORDFLDS' ? ( i.e using connection parameter )?
Appreciate if you can throw me some light on this.
Thanks
Vignesh M

Hi Vignesh,
ANy luck on this ? I am trying the almost same thing...and stuck at same point.
Please let us know if you have any more information.

Tables /SAPAPO/9ADEMCRT and 9ARAWCRT transportable or they need re-init ?

Hello SPP experts
The tables generated by the <IInitialize data realignment of demand history> /SAPAPO/9ADEMCRT and 9ARAWCRT do not seem to be transportable unless I request an access key, make a change and try to attach it to a package. When you do <Object directory Entry> in SE11 on one of the table the system says
Object directory entry R3TR TABL /SAPAPO/9ARAWCRT does not exist.
Before doing this attempt, does anyone know if they can be tranpsorted or the initialization must be done in Q and P by way of manual config ?
Please advise asap.
Tx
YB.

Yes, a session bean is how I have been using, but wasn't sure if that was needed (there was a way for a page to hold it's own value).
However, I am a bit confused (unsure) about the scope of beans in a portlet. Does the scope refer to the the portlet itself, or the entire portal? (IE, if I add variables into the application scope, is it for all portlets in the portal, or just the portlet I am deploying the variable into?). Same for Session Beans, are they available to all portlets in the portal session, or just that portlet?
Beacuse of these questions, I have been weary of using beans (at a higher level then page). Thanks for the note.

How to find the apo related tables

Hi Experts,
Tables required for APO related. please suggest me.
Edited by: avenkatrao on Jul 15, 2010 8:14 AM

Hi,
Will you please clarify in which system you looking APO related tables .
If you are looking into SCM system, then , you can search through SE12 transaction "SAPAPO/* tables with search critera.
Regards
Datta

Table /SAPAPO/RES_HEAD update?

Hi All,
There is an inconsistancy between the values shown in the Resource Master and those in the table /SAPAPO/RES_HEAD.
What could be the possible reasons for the same? Does the table refresh from the parent structure periodically? What do I do if I need the updated values in /SAPAPO/RES_HEAD???
Warm Regards,
Shiva

Shiva,
Do you mean the below fileds not matching?
LC DAYS MINUS
LC DAYS PLUS
Is yes:
These values are stored in the table: /sapapo/reslct
the values in CFC9 defines how many time slots CIF transfers to APO
for each resource with external time stream. If there is nothing
defined the system uses -30...+600 as default values.
But the length of the time stream of the resource itself has to be
defined in the resource itself. Otherwise the system uses a default
value defined in database table /SAPAPO/RESLCT.
If you delete them and create yor own entry this should work as
expected for new resources.
Since this values are created while you tranfer the resource first time.,the values are taken from CFC9 settings.
If my understanding is wrong for your problem , let me know the exact field value you have the inconsistency.
-sundar

What are APO orders in APO (APO Order transaction:-SAPAPO/SNPTLB)?

Hi Experts,
Basically, am ABAP developer, but, i got a statement as below, regarding the APO,
User Exit of EXIT_SAPMSNPUSER_006 was used for the APO Order transaction:-SAPAPO/SNPTLB.
- What is the APO Order transaction:-SAPAPO/SNPTLB?
- What are the APO orders? Are they are planned orders, like PLNUM field in PLAF tbl?
- Why this transaction is used?
- What could be the business requiremnt behind this development?
- Any other info?
If my question is wake, sorry! Replies are gretaely appreciated.
thanq
Edited by: SAP ABAPer on Mar 29, 2009 7:09 PM

Hi,
Transaction /sapapo/snpylb is a transaction for Transport Load builder.
It does an optimised load build.
It is used to create transport loads once the deployment is carried out.
Once the load is created and you hit save, the user exit EXIT_SAPMSNPUSER_006 gets called.
When one creates the load, APO assigns an internal no to the id.
We had used this user exit to generate a custom no once the user hits save.
Hope you find this information useful!

BADI / User Exit for APO Order transaction /SAPAPO/SNPTLB

Hi Experts,
We have a proxy interface and currently we are using FUNCTION EXIT_SAPMSNPUSER_006 for the APO Order transaction: /SAPAPO/SNPTLB.
This exist is triggering before the Order is being saved in APO and at times it is throwing an error 'Order key already exists in live cache' in the APO system.
Is there any other BADI or User exit available to Save the order in APO before the interface gets processed?, if so, plese guide me.
Thanks & Regards,
Vijaya

Hello Lakshmi,
I am having the same issue with the message "Order key already exists in live cache" in our system.
We are using the user-exit EXIT_SAPMSNPUSER_005 for UoM conversion. But we are not making any explicit proxy calls
to /SAPAPO/SNPTLB. Does the system automatically call this transaction with this user-exit?
Did you get a resolution for the issue. I would really appreciate if you can let me know how you have addressed this.
Thanks,
Ratnam

Model updation in table /sapapo/model

Hi,
Could any body give solution to this query?
To get update the table : /sapapo/model which remote function module we can use?
Actually I have created one model using Function module RSDMESC_DB_MODEL_CREATE.
this model is getting updated in table : RSDMA_DBT_MODELT.
But I need this newly created model available in to the table :   /sapapo/model
How can I do this.Please update me.
Regards

HI,
   As per my requirement data is not getting updated in to the table /sapapo/model.
using   the function module which you have given, it is just checking the model and given the status whether it is available or not.
Regards

Issues with BDLS for table /SAPAPO/TSTROBJR after system refresh

Hi,
After a recent refresh of our QA system from the Production system, when we are running BDLS for the table /SAPAPO/TSTROBJR to convert the logical system from Prod to QA, it's not allowing us to make the change.
Error message reads:
/SAPAPO/TSTROBJR LOGSYS 1 0 <<<<
<<<< Error in field of table . Manual correction required.
I have already tried to run the report /SAPAPO/SCHED_BUFFER_RESET, but this has not been of much help.
What can we do to resolve this issue?
Do we need to take some extra steps before we can run BDLS, or is there some other way to update these time streams for unloading point?
Thanks - Pawan

Scheduling buffer reset did not update teh time stamps, but the new GATP checks are noe able to change teh time streams. So, issue doesn't exist now.
Closing this thread.

Replicate APO master table data into HANA db via SLT

Hi,
Can anybody help me on replicating SAP APO master table data into SAP HANA by using SLT.
What is the hardware requirement (Version & Patch) for APO system to communicate with SLT and is it the same methodology to follow while replicating ECC data via SLT to HANA or different.
Please treat it urgent and your suggestions highly appreciated.
Thank you,
Ian

Hi Ian,
From replication perspective its follow the same methodology as ECC replication to HANA.
You have to install DMIS 2011 component on your APO system to communicate with SLT.
For more details you can refer SAP note: 1759156
Cheers

9ASVTTY (Safety Days Supply) UoM in table '/sapapo/tspaplob'

Hello All,
We faced an issue whereby the safety days supply was being displayed in Base UoM of the product like 'EA'. After further exploring this issue and comparing with standard SAP Planning Areas we found that a value of '10' has to be maintained against 9ASVTTY for field UOM_PLAN in table /sapapo/tspaplob.
After making this change the safety days supply is being displayed in DAYS again. Although the issue is resolved I still want to know what is the significance of maintaining this value '10' in the table. Also can we maintain a unit like 'D' or 'H'. After maintaining this value in the table I dont see any corresponding change in the Planning Area for 9ASVTTY, field 'UoM'.
An early reply is highly appreciated.
Thank You.
Abhi.

Hi All,
There is this function module called by the Planning Administration view, called CONVERSION_EXIT_CUNIT_INPUT. Below is a code extract pointing to where exactly does the system equate D to "10"
IF sw_use_buffer EQ space
    OR language NE sy-langu.
      SELECT * FROM t006a UP TO 1 ROWS WHERE spras EQ language
                          AND   mseh3 EQ input.
        output = t006a-msehi.
      ENDSELECT.
    ELSE.
      t006a_s_tab-mseh3 = input.
      READ TABLE t006a_s_tab WITH KEY t006a_s_tab-mseh3 BINARY SEARCH.
      output = t006a_s_tab-msehi.
    ENDIF.
    PERFORM get_t006b USING    language mseh3
                      CHANGING output l_return_code.
From this code extract, we see that the value mapping of UoM is actually in table T006A. If you equate the UOM_PLAN field in the Planning Area field, with MSEHI of table T006A, the value at field MSEH3 or table T006A would reflect in the planning book.
Hope this helps

Table /SAPAPO/CTMML not available in new SCM 7.0 EHP1

Hi Gurus,
First let me provide you background of the issue which we are
facing.
We have two SCM systems D06 and D21.
D06 SCM release is SCM 5.0 and D21 SCM release is
SCM 7.0 EHP1 which we have recently installed.
The issue which we are facing is that there is one table /SAPAPO/CTMML
which is available in D06(SCM 5.0) system but it is not available in
new D21(SCM 7.0 EHP1) system.
Please clarify us on the below point.
Whether this table is available in the new SCM
7.0 EHP1 environment and if no then is there
any another table which has replaced this new table in the new SCM 7.0
EHP1 environment.
We have made Search for Objects in Requests/Tasks
in Tcode Se03 and provided the value /SAPAPO/CTMML in R3TR TABL
table/structure column and got the below result.
This table we are using to store the CTM Profile id and Product and
Locations. We use this table to read the Product and Location for a
customized program that generates the spool.
So we like to know how to generate this table else we would like to
know the alternative table for this.
Can you please suggest us some table which we can use as an alternate
to table /SAPAPO/CTMML.

Hi Gurus,
First let me provide you background of the issue which we are
facing.
We have two SCM systems D06 and D21.
D06 SCM release is SCM 5.0 and D21 SCM release is
SCM 7.0 EHP1 which we have recently installed.
The issue which we are facing is that there is one table /SAPAPO/CTMML
which is available in D06(SCM 5.0) system but it is not available in
new D21(SCM 7.0 EHP1) system.
Please clarify us on the below point.
Whether this table is available in the new SCM
7.0 EHP1 environment and if no then is there
any another table which has replaced this new table in the new SCM 7.0
EHP1 environment.
We have made Search for Objects in Requests/Tasks
in Tcode Se03 and provided the value /SAPAPO/CTMML in R3TR TABL
table/structure column and got the below result.
This table we are using to store the CTM Profile id and Product and
Locations. We use this table to read the Product and Location for a
customized program that generates the spool.
So we like to know how to generate this table else we would like to
know the alternative table for this.
Can you please suggest us some table which we can use as an alternate
to table /SAPAPO/CTMML.

ROW COMPRESSION - table /SAPAPO/BOP

Hello guys,
I have a big performance problem in table /SAPAPO/BOP at SCM system. I run the /SAPAPO/BOP_DELETE to delete entries older than 7 days. I saw in my database lot executions as sequential read, update and delete during of SPP and GATP - BO processing. As I have the ROW COMPRESSION active for this table, I would like to know if this could have some impact for the performance issue.
Could you please advise about this?
Many thanks,
Carlos.

Hi
Please check the note below may help you,
Note 1416044 - BOP performance improvement for updates back from erp to scm
Thanks
Sadiq

Select form table /SAPAPO/ORDMAP fails

Hi,
I'm performing a system copy of an SCM system. The procedure includes executing the following select statement in the MaxDB database:
"select LOGSYS from "SAPR3"."/SAPAPO/ORDMAP"
The command failed due to the following error "Base table not found;-4004 POS(16) Unknown table name:/SAPAPO/ORDMAP"
I looked at dba_tables and found that the table's owner is SAPLCA, I tried also the above statement using this owner, but it didn't work either.
Selecting from some of the SYS tables is working, but none of the tables which belong to SAPLCA (according to dba_tables table) worked.
Can anyone please help to find out the content of /SAPAPO/ORDMAP?
Thanks,
Shiri.

Hello Shiri,
I saw that the similar question was posted in the opened the OSS message 558872/2006 on queue BC-DB-LCA. Correct?
As you are using liveCache & APO, you are SAP customer, and I would like to recommend you to work with SAP support in the message 558872/2006, or, if it's NOT your message, open the new one for SAP on queue BC-DB-LCA or 'BC-DB-LVC'.
If you are performing the Homogenous liveCache copy using backup/restore procedure, please review the SAP notes 457425 & 877203.
-> run the SQL statement as DBA user ( default :'SUPERDBA' ) & check that 'SAPLCA' user is listed:                                                       select * from domain.users
[ you could use the SQLSTUDIO, logon as superdba user, or dbmcli tool:
dbmcli -d <LCSID> -u <control>,<control>
dbmcli on <LCSID>>sql_connect superdba,admin
dbmcli on <LCSID>>sql_execute select * from domain.users
dbmcli on <LCSID>>exit
-> Run the SQL statement as SAPLCA user ::
   select * from tables where owner='SAPLCA'
[ you could use the SQLSTUDIO, logon as SAPLCA user, or dbmcli tool:
dbmcli -d <LCSID> -u <control>,<control>
dbmcli on <LCSID>>sql_connect saplca,<pwd>
dbmcli on <LCSID>>sql_execute select * from tables where owner='SAPLCA'
dbmcli on <LCSID>>exit
-> Run the SQL statement as SAPLCA user ::
   select LOGSYS, count(*) from "SAPLCA"."/SAPAPO/ORDMAP" group
   by logsys
[ you could use the SQLSTUDIO, logon as SAPLCA user, or dbmcli tool:
dbmcli -d <LCSID> -u <control>,<control>
dbmcli on <LCSID>>sql_connect saplca,<pwd>
dbmcli on <LCSID>>sql_execute select LOGSYS, count(*) from "SAPLCA"."/SAPAPO/ORDMAP" group
   by logsys
dbmcli on <LCSID>>exit
Thank you and best regards, Natalia Khlopina

APO DP - table /SAPAPO/FCST_LC1 question

Similar Messages

Maybe you are looking for