Apostrophe and inverted commas shortcuts fail in iOS6

Apostrophe and inverted commas shortcuts do not work in iOS6. Any solutions?

They work for me. You just push and hold, then slide up to select them. Personally, I liked it better the other way, where I didn't have to look at the key.

Similar Messages

Autocommit and Cursor commit Behaviour

Hi,
I need help to set and get the Autocommit and Cursor commit behavior attributes
in Oracle.
AUTOCOMMIT:
For DDL Statement, this attribute is set while executing the OCIStmtExecute() api
as below:-
r = OCIStmtExecute(d->svc, d->sql, d->err, 1,0,
(CONST OCISnapshot *) NULL,
(OCISnapshot *) NULL,
d->transaction ? OCI_DEFAULT :                                         OCI_COMMIT_ON_SUCCESS);
For DML Statement, from the OCI documentation the database parameter attributes
support OCI_ATTR_AUTOCOMMIT_DDL with the values OCI_AC_DDL and OCI_NO_AC_DDL.
Since this is a parameter attribute, I couldn't set using OCIAttrSet() API.
I need help in implementing AUTOCOMMIT for both DDL / DML statements.
CURSOR COMMIT BEHAVIOUR:
Similarly, I have observed that Oracle support cursor commit behavior attributes
using OCI_ATTR_CURSOR_COMMIT_BEHAVIOR and the attribute values are OCI_CURSOR_OPEN and OCI_CURSOR_CLOSED.
I have tried setting this attribute as below:-
ub1 nCommitType = OCI_CURSOR_OPEN;
oraRC = OCIAttrSet((dvoid *)d->svc, (ub4)OCI_HTYPE_SVCCTX,
     (dvoid *)&nCommitType,
     (ub4)sizeof(nCommitType),
     OCI_ATTR_CURSOR_COMMIT_BEHAVIOR, d->err);
This always fails with the error ORA-24315: illegal attribute type.
I need help in setting this attribute using OCI.
Another approach to set Autocommit / Close Cursor attributes:-
Oracle support SET commands for autocommit and closecursor, I have prepared
and executed these set commands using OCIStmtPrepare and OCIStmtExecute api. The OCIStmtExecute() API fails to execute the below command texts.
SET AUTOCOMMIT ON/OFF
SET CLOSECURSOR ON/OFF
Is it the right method of setting these attributes?
Thanks,
Sankar.P.

Hi.
You are trying to commit "child" information before your Parent information is commited.
Can you describe how you dragged & droped your views?.
Dragged relationship views or single views?.
Can you put output log with jbo with FINEST level?.
To find a solution try next solutions:
1) Disable "strong" association between your parent-child entities. To achieve it follow next steps:
- Go to your "Assoc" that describes your foreign key.
- In "Realtionship" tab, "Behaviour" disable "Composition Association".
Image: http://1.bp.blogspot.com/-Em8NZvjOUzo/T_NQbJTcLjI/AAAAAAAAAm4/hPsDwtEhJQ4/s1600/4.png
2) Drag and Drop correct views as a Master-Detail (cascading views in your Data Control).
http://2.bp.blogspot.com/-1By5vNNGMFQ/T_NQdYzexKI/AAAAAAAAAnE/DGn7Gr0RSDw/s1600/6.png (in spanish).
In the image, drag & drop PortalwebView2 is the correct way for Master-Details tables. Probably you dragged PortalwebView1 that have dependecy to master table.
Steps that you have followed:
- Drag & Drop dependen View Object as a Master-Detail with two tables.
- Add Create operations from these views to create Rows.
- Add Commit general operation from Data Control.
Try to drag & drop Master-Detail views correctly before disable association.
PD: To try your model faster run Model project instead of your application.
Regards.
Edited by: Daniel Merchán on 30-jul-2012 12:05

Connecting to a custom network - NO INVERTED COMMA???!!!!

I am currently trying to connect my iphone to my wireless network,
The issue i am having it that i cannot seem to find the ` (inverted comma) button on the keyboard on the iphone??? is there a way to upload the network key to the phone and connect to the network like the e71??? what are my options here besides changing the network key as this is not feesable!!
Thanks

it's because osx doesn't have a default 'remote desktop' client.
Go here:
http://www.microsoft.com/mac/products/remote-desktop/default.mspx
and you can download a remote desktop client for mac, and will look just like the one for windows. After that, come back here to see if we can help further.
But if you're using it at home (not connecting your mac directly to your works network) then you would need some sort of secure way of connecting to the work network first. ie) cisco vpn client for mac (if they are using vpn). Do you have vpn token or mobikey?
Message was edited by: Aunty June

What exception should I use when commit work fails ?

hi all:
I create a class with methods to insert , modify and delete trasaction data,
when commit work fails, I want to throw an exception, what exception should I use
for this case?

In general, you should do your commit using CALL FUNCTION IN UPDATE TASK. As this runs in a different process, you will never be able to catch an exception in your main task, even if you throw one in the Open SQL code. What you should do is carefully validate your data before posting it to the database, so that commit cannot fail for data integrity reasons. If it fails for technical reasons (DB down etc.) there is nothing that your code could do about it anyway, so in this case even getting an exception would be no use. What exactly is it you are trying to accomplish?
-- Sebastian

Problem with inverted commas in texts in WAD

Hi all,
I've a problem with description texts in WAD. In a graph where one of the columns have the description, let's say something like ' bla"bla ' (in Hebrew we've texts with inverted commas in the middle of the word) and when I point with my mouse on the point to see the value in numbers the text is cut. let's say 'bla"bla' had 15 value it wouldn't show it, but it would show 'bla'. if the text is ' bla ' with value 18, it shows ' bla 18' .
How can i solve it?
thank you,
Yoav.

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Inverted Comma database Problem

Hi!
I am using making n article management system
using which i am storing articles in the form of HTML in the database.
& it is working cool i am storing the data in database
but when article have any inverted comma like this
"here's the "preloaded content" "
it gives error in the query execution i am using MySQL
Please Help
BuntyIndia

When you concatinate the data to sql string the characters in the data can break the syntex. Thats what happerning
Where is an example.
Lets say that you have a document information in following in following variables
Name of the document in "doc_name",
Content in variable "doc_content"
and you want to insert them in to table DOCUMENT_TAB
and the JDBC connection is con
PreparedStatement ps = con.prepareStatement("INSERT INTO document_tab (name,content) VALUES(?, ?)");
ps.setString(1,doc_name); //this will set the value for 1st '?'
ps.setString(2,doc_content); //this will set the value for 2nd '?'
//now execute
ps.executeUpdate();
//close the statement
ps.close();

How often have inverted commas in an inserted text to be doubled?

Hello,
if I want to insert a text into a string field and the text contains inverted commas, how often have these inverted commas to be doubled, to avoid inserting errors and to keep the original inverted commas after insertion?
Example "this is a text to be inserted and it contains *'text in inverted commas'* and normal text" How has it to look to keep the single inverted commas in the the text after inserting it?
Regards
Carsten

Use (a) the quote operator or (b) escape quotes.
For the first case, assuming you're on 10g or higher, your example would be:
Insert into tab1 values( q'{this is a text to be inserted and it contains 'text in inverted commas'}'); For the second case, simply add a single quote to escape another. Your example would be:
Insert into tab1 values( 'this is a text to be inserted and it contains ''text in inverted commas'''); (Notice the trailing quote is the end-quote for the entire text.)
Edited by: Sharma on Mar 21, 2011 4:26 PM

Error: failed to commit transaction (failed to retrieve some files)

Hello, I am trying to get a fresh install of arch linux going, but,
When I exectute pacstrap -i /mnt base base-devel, I get an error:
warning: failed to retrieve some files
error: failed to commit transaction (failed to retrieve some files)
Errors occured, no packages were updraded
==> EDDOR: Failed to install packages to new root
I have no clue what is wrong, I tried changing my nameserver, updating the keyrings, and updating the system. How can I fix this?
Thanks!
Last edited by Whiskertoes (2015-02-03 02:46:53)

Yeah, right before this it gives the same error multiple times:
error: could not open file /mnt/var/cache/pacman/pkg/vi-1:05325-4-x86-64.pkg.tar.xz.part: Invalid argument
This error fills the entire screen, I am relatively new to arch, please help

JWS Desktop shortcut fails to update after JNLP change in 1.6.0 update 18

Has anyone else noticed the desktop shortcut fail to update after a change to the JNLP with the latest Java 1.6.0 update 18 release?
Here are the steps we've found to replicate the issue on Windows XP, Vista, and Windows 7 using both IE and Firefox:
1) Download a JWS application and allow the desktop link to be created
2) Inspect the desktop shortcut and notice the path to the JNLP cache entry
3) Modify the JNLP at the server
4) Run the application via the desktop link - at this point the application will download updates and execute without issues.
5) Close the application - upon close, JWS will remove the old JNLP cache entry if the JNLP contained the security/all-permissions directive
6) Inspect the desktop shortcut again - notice that the path to the JNLP cache entry will remain unchanged
7) Launch the application again using the desktop link - JWS will fail with a cache exception if the JNLP contained the security/all-permissions element or will just run from the old JNLP
I've submitted a bug but just wanted to confirm that others are encountering the same issue.
Thanks,
Troy

Thanks for confirming.
This issue seems to continually creep into the Java releases. In the 1.6.0 releases, the issue is resolved in update 7 through update 11. Update 12, 13, and 14 all had various JNLP issues but I did find this specific issue with update 14. It was fixed again in update 15 and remained fixed through update 17.
I submitted two bugs and provided a simple sample application on our production site to use for testing with a url to update the last modified time. If bug is accepted, I'll post it here for others to vote for a fix.

Inverted Comma's coming in Item description Automatically-Urgent

Hi All,
I am bit confused about how Inverted comma appears automatically although not required.What is the solution for that.My client doesn't requires that.Try to rep ASAP.
Thanks in advance
mona

I would like to know whether Inverted comma's appearing for all item names that you import (or) for few.
1. If your answer is "for few" then "check for your master data in excel sheet"
2. Whether your master data - item description contains any single quote/ double quote/ special characters.
3. Save your excel master data file in "CSV" format
4. Open the "CSV" format file in notepad and use find and replace to remove those unswanted special characters (including inverted comma's).
5. Import/ Update based on your database status.
Note: As risk is involved in doing these steps directly in Live database, I recommend you do in test system at first.
Hope this helps.
Regards
Satish

Difference between Implicit and Explicit Commit

Hi All ,
Can some one pls let me know the difference between Implicit commit and Explicit Commit .
Thanks in Advance..

>
Kalyan wrote:
> Hi,
>
> An explicit commit happens when we execute an SQL "commit" command.
>
> Implicit commits occur without running a commit command and occur only when certain SQL (DDL) statements are executed
>
> (Ie, INSERT,UPDATE OR DELETE Statements)
> >
> Hope this is clear & Helpful Short and Simple.
>
> Thanks
> Kalyan
Highlighted bit is incorrect.

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

Epub interpreting apostrophes and em dashes as Äô and Äî

I am using InDesign CS4 to create an ePub. I have one chapter that is interpreting apostrophes and em dashes as Äô and Äî, upon exporting to ePub format. If I export chapter document separately from the book these characters are displayed correctly, but if I export entire book these characters display correctly in all but this chapter. This ePub does include a TOC Style. When I delete text containing styles that are associated with the TOC style and export, characters are displaying correctly.

The only reason I even know about this is
because I’m able to see the catastrophe in my
original text included in their responses.
That doesn't necessarily mean that your outbound mail is appearing strange to the reader. I would advise you to check that and verify that you really have a problem.
If your readers do see strange characters, it is often because you are sending rich text (which is really html mail) and they are using MS Outlook. Some possible fixes are in this note:
http://homepage.mac.com/thgewecke/woutlook.html
PS Getting rid of all smart punctuation (curly quotes and apostrophe's, special dashes) may also be helpful.

Apostrophe and inverted commas shortcuts fail in iOS6

Similar Messages

Maybe you are looking for