APP(f110) : Alternative Payee not handled in check register

Hi,
Request expert advice for the below situation -
Vendor 1 is maintained as an alternative payee for Vendor 2.
Now there exist 2 invoice say,
Against Vendor 1 - $100
Against Vendor 2 - $200
Now, I create a auotmatic payment program (F110) and include both the vendors in the same proposal and execute -
Ideally, there should be a single check against Vendor 1 for $300, but there will be 2 payment doc numbers generated against each vendor. --> This step is working fine.
Issue: When i check in the check register (FCHN), only the payment docuument number against Vendor 2 for $ 200 is available.
Where am i missing? Is it config related? or is it variant releated?
Regards,
Sridevi
Edited by: Sridevi on Sep 30, 2008 1:44 AM

Hi Sridevi
Please check the table PAYR and see what is the check number in the table for the other payment document. The current check details should be there in the table. This means that in FCHN there is some selection parameter that you need to change. Just give the details of the paying company code, account id and house bank. Just give the check number and nothing else in the selection. I am sure the amount will show up. Let me know what was the result.
Karthik

Similar Messages

F110- Alternative payee in payment proposal.

Hello Experts,
I have an issue with alternative payee, when I have executed a payment proposal for a vendor it has picked alternative payee in payment proposal.
I can see assignment of alternative payee in table LFA1 for that vendor, however I am unable to see any assignemnt of alternative payee in Vendor master records as well as at document entry level.
Please let me know is any other way which it pick up the alternative payee in payment proposal other then through Vendor master record.
Regards,
MM

Hi Kameshwar Rao,
Thank you very much for your reply,
As I mentioned in my question. I have checked in Vendor master General as well as Company code data, however I am unable to see any alternative payee assignment in vendor master record, but when I saw in LFA1 table for that vendor, I can see assignment of alternative payee for that specific vendor.
Please let me know how it is display in LFA1 table even though it does not contains any entry in Vendor master record.
Regards,
Mahesh

APP - Clearing open item, but not display in check register

Hi Experts,
In ECC6 APP..........when i run, it clearing open items, but the same amount in check register not display...
FCH5 showing no list generated?
how to resolve.
Regards

Hi Anil,
Use T-code : FCHN for check display,
the T-code FCH5 which you are looking is for manual check creation.
Thanks,
Ratnam

Mail.app 2.1.3 not handling video attachments anymore

Hello,
About 2 weeks ago, Mail.app (v. 2.1.3) started this behavior:
When "Sharing" video clips in QuickTime Pro 7.5 ( .mov or .wmv files) and selecting "Large" (or "Medium") - the file attached to the email is always "Small." Have tried Sharing the same clips several times - each time selecting (mostly Large) and always get "Small."
I thought of trying deletion of Mail plist but am unsure (thought it might cause a serious loss of such things as contacts list or of Inbox data base).
Wondering if anyone can give me suggestions on how to get Mail to "obey" my file size selections for "Shared" video files?

BDAqua,
I'm back! Well, I spent considerable time earlier (now yesterday in my area) to ensure I would follow your suggested fixes w/o mishap. But as often happens - there were a few side tracks on the way.
The result is: +I have not tried+ any of your suggestions because (on nothing but a hunch) I tried again to "Share" from QuickTime a movie file as (in succession) Large - Medium - Small. This "series" produced exactly the sizes of (.mov) file I had selected. Both the outgoing email attachments and the "return" emails were of the "predicted size" and played back accordingly on the return email.
Interesting (and mysterious): Before I tried the above (three in all) Sharing attempts, I happened to check my Trash folder and saw the following items had been deposited there (with absolutely no effort or actions on my part!):
In a "Recovered Items" folder in Trash:
1. a folder named: "com.apple.mail"- empty (zero items).
2. a folder named: "com.apple.mail.drag" - contained 1 item, a .gif file.
3. a folder named: "tempemail_folder11360585" - contained 1 item, a .jpg file (one of four I had attached to an email on August 8!)
This is strange, I had not even gotten around to backing up Mail.app files as we discussed.
They were not there (in Trash) earlier in the day - I am editing photos and video all the time and often check my Trash folder before closing each project - just to make sure I haven't trashed any essentential items.
Possibility: I had not mentioned because I had not thought of it until getting back to the trouble-shooting, I have a cloned boot drive on my Mac Pro. I decided to try this same QT Sharing with Mail.app _on the cloned drive_ to see if the same problem existed "there." It did not.
But - (again we have so many possible side-tracks with these computers!) - I had reason to run Software Update on the cloned drive (because it was still running 10.4.9 vs 10.4.11 on my boot drive). It was after this system upgrade on the clone drive that I checked the Trash on the boot drive and found the mysterious Mail.app Folders. (There were other items in Trash: most of them expected because I put them there!)
Anyway - the problem with getting the chosen size "shared" movie files on emails created in Mail.app is apparently gone, solved itself. I'm almost sorry I didn't get to trouble-shoot this so I'd know what the original cause was.
Thanks anyway for your help - it was appreciated.
macnoel

Check Register and its Update on encashment

Check register update
Posted: Aug 18, 2006 9:01 PM Reply E-mail this post
Hi,
When I run FF_5 Electronic bank it posts document after matching the transaction based on Check no. But after posting ( encashed) it does not update the check register ( encashed date is blank.)
What is the reason? when the check register gets updated?
Thanks,
Chitra

Closed.
Fyi, I've been testing AET with check table on an IDES system (SAP CRM 7.0). There are oss notes available about AET/check table program errors for SAP CRM 7.0 with correction instructions. In CRM 7.0 EhP1, that issue's been solved. In 7.0 EhP1 if you do exactly as I've done, no problems will occur about populating field values of the check table.

Check printing to handle payment to alternative payee

Hi,
Requirement
For our customer, alternative payee is not currently configured.
Finance manually nets the amount between two vendor and then process check payment.
Hence we have a requirement to automatically print a single check for payee and alternative payee together in and net the amount of all invoices.
Currently when we do check printing (copy of SAP program RFFOUS_C), if we have a vendor A and vendor B (whose alternative payee is vendor A), then we get two different checks with Vendor name as Vendor A.
Business requirement is to get single check for Vendor A consolidating the remittance information of both vendors (Vendor A and Vendor B).
We also want this to be reflected properly in check register and check number assigned to both the payment documents.
Technical Changes
The change requires only one check number against 2 Account Numbers of Vendor/Creditor.
In the subroutine scheckinfo_speichern in Program RFFOUS_C, there is a logic to insert a new record in PAYR table against a check number.
Check Number (PAYR-CHECT) is a primary field in the table. Our requirement is to have 2 PAYR-LIFNR entries against the same Check Number(PAYR-CHECT).
But given the structure of the table with Check Number(CHECT) as primary key field, this cant be achieved.
Is there any other alternative for the same.
Thanks,
Best regards,
Prashant

Experts,
any pointers please ..
Thanks,
Best regards,
Prashant

Alternative payee through APP

Hi,
We can pay vendor bills to third party using Alternative payee in SAP I have maintain Alternative payee in vendor master while i am run a APP system issue third party but while running APP i want change Alternative payee again is it possible to change in APP.
Regards,
Raju.

Hi Sridevi
Please check the table PAYR and see what is the check number in the table for the other payment document. The current check details should be there in the table. This means that in FCHN there is some selection parameter that you need to change. Just give the details of the paying company code, account id and house bank. Just give the check number and nothing else in the selection. I am sure the amount will show up. Let me know what was the result.
Karthik

When we run F110 on multiple vendors, some vendors check not printed

When we run f110 on Multiple vendors (payment method is C). Some vendors do not get a check. how ever a payment document is created. I can see the posting in FBL1n.
the text of the error message is thus:
"The following payment documents/payment orders were not updated
(Result of the payment document update)
    CoCd Payment document/Payment order
    (payment document numbers are listed here)
The accompanying payment media have not been generated"
Has anyone had this problem before?
All help is appreciated.
-Pratibha

Hi Pratibha
The reason may be
the vendor having a separate house bank in vendor master wrt to the varient u have given when running app.
If the variant not belongs the vendor house bank with payment method combination, then only the accounting entry will be updated.
Pls check.
Srinivas

HT204053 When I initially try to sign in to iCloud, I get the "Account not verified" screen and I am told to check my email for instructions to verify. No email is ever sent. My ID and password work on all other Apple app's. Why not for iCloud?

When I initially try to sign in to iCloud, I get the "Account not verified" screen and I am told to check my email for instructions to verify. No email is ever sent. My ID and password work on all other Apple app's. Why not for iCloud?

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

HT1386 I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync, but apps & podcast will not. All checked to syn

I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync to the 4G, but apps & podcast will not. All are checked to sync. During sync, it gets to "determining apps to sync" then immediately goes to "finished syncing". No apps or podcasts from my Mac itunes are on the touch 4G.

You can only sync to one iTunes library but you can manage music and videos among different computer/libraries.
It appears that you are trying to sync with a different library.
- If you want to make the Mac you syncing computer:
--- Connect the iPod to the computer and make a backup by:
iOS: How to back up
--- Restore the iPod from that backup. Note that synced media like apps and music are not in included in the backup.

HT201457 I have a mid 2011 iMac and have installed windows 8.1 on it I costantly get system thread not handled and kernel security check failure and the Mac restarts

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur

F110 payment run completed but not generated all check for the payments

Do any one have an idea or the potential answer on my query
I've run F110 and generated one Payment all 45 open items for one vendor
Now after the print done only the first 20 items got into the check register, and left over the remaining 25 items
So my question is why system not generated the check for the remaining 25 items and what is the remedy

No all settings are available, but still the same situation the all checks are not generated for all items of the vendor open items clearing in the one payment documents
single vendor
single payment for all 25 open items
After print activity compelted
checks created for items 5
leftover items 20 not created check
can anyone tell why system is behaving like this

Unable to book order in oracle quoting. : APP-236113: Order is not eligible for booking. Check workflow status of this order

Dear All,
I am trying to book an order from oracle quoting. I am getting the following error and unable to proceed.
Please help me.
APP-236113: Order is not eligible for booking. Check workflow status of this order.
Thanks in advance.
Regards,
Gautam.

Gautam,
Check the profile option i.e. is to set the default order status while it is created from Quote.
Regards,
F. Afzal Hussain.

Open vendors items paid to unique alternative payee in one check

I have the following open items for a vendor to be paid by the payment
program, each vendor has the same alternative payee, and we need just one check is printing to the alternative payee:
Vendor | Item |Amount   |Payment Method | Alternative payee|
1001   | 1     | $100      | C - heck             |   5000               |
1500   | 2     | $200      | C - check           |   5000               |
2600   | 3     | $300      | C - check           |   5000               |
When the payment program is executed, we need each invoice of the each vendor must be paid to the unique alternative payee in one check.
Are there any other options available to enable these open items to be grouped together as one payment and printing in one check?
Right now, when the payment program is executed, each invoice of each vendor is paid as a separate item, in this case, three checks are created to the same alternative payee, we want just one check to the alternative payee is printing,
Thank you, for your help with this situation.

Experts,
any pointers please ..
Thanks,
Best regards,
Prashant

F110 is not printing any checks

Hi Gurus
FBZ5 and F-58 are printing checks but F110 is not.
I am assuming when the first two Tcodes are printing, the config is done good enough. I am just not sure what is stopping F110 from printing.
When I check 'Own Jobs' the F110 job is listed and status says 'Finished' but there is no spool request for it.
RFFOUS_C has all the proper items selected and exactly the same details as FBZ5. I dont know what else to suspect, so I am approaching you. Please help.
Thank you
Manu

Hi Paul
In F110, under the tab 'printout/data medium' there is the program RFFOUS_C, and beside it I have placed my variant with the following items filled in.
1. Housebank
2. Account ID
3. Check lot number
4. Printer names for all the boxes and all are print immediately and all check boxes switched ON under 'Print Control'.
So while running my F110, I have filled this variant beside the RFFOUS_C program. This same exact details I have used for FBZ5 and it is able to print.
I have run it using SE38 with same parameters as above and it is printing checks but it just wont print when used with F110.
Any thoughts as to what is going wrong?

APP(f110) : Alternative Payee not handled in check register

Similar Messages

Maybe you are looking for