App worked fine with old SDK, new SDk launches and crashes, font problem?

So there is something my app doesn't like about 2.1. Here is my crash log. It's complaining about a font? Any ideas? This is the same version that worked fine in the old SDK. It crashes running on the 2.0 simulator or 2.1 simulator.
[Session started at 2008-09-09 22:30:29 -0700.]
2008-09-09 22:30:31.194 iLeaseMyCar[3528:20b] * Assertion failure in -[UILabel setFont:], /SourceCache/UIKit/UIKit-738/UILabel.m:438
2008-09-09 22:30:31.195 iLeaseMyCar[3528:20b] * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid parameter not satisfying: font != nil'
2008-09-09 22:30:31.197 iLeaseMyCar[3528:20b] Stack: (
2468294987,
2480804091,
2468294443,
2471410724,
817183141,
817926218,
837317240,
837317032,
837315376,
837314643,
2467789250,
2467796004,
2467798264,
829005112,
829005309,
816175835,
816221412
)

deleted a button on my view in IB and it stopped crashing. So I recreated the button and now it works fine... wierd. Phew, I'm up and running again with the new sdk. Wierd problem.

Similar Messages

TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.

Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.

Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.

Photosmart 7960 worked fine with old computer (XP), but not with new computer (W7)

Recently replaced my HP Pavilion a650Y running XP with custom-built running Win 7-64. 7960 printer worked fine w/ XP and worked (test page) once with Win 7-64. Now when I try to print, job shows up in print que, bur printer goes off-line and gives me "printer error" message. I can print test page from printer front panel, so I know printer is working, but can't print anything from computer.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I updated my iPad 4 with the new iOS7 and since then Skype started problem and now email i.e, yahoo as well. I can hear people on Skype but they can't hear me though it was working fine with old version. Is any one else having same problem?

I recently purchased iPad 4 and it is only one month old. I updated with iOS 7 and next day got problem with Skype and yahoo mails. People can't hear me on Skype though I can hear them clearly. I was replying yahoo mails quite nicely and now as I start typing the iPad turns black and have to open it again. Is there any one else facing the same problem? I was thinking to go to apple shop for support? Any suggestions?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

IPhone 4: connecting to TV for the 1st time with new "Composite AV Cable" only plays sound, not video on TV. However, this new cable works fine with old iPod to play videos on TV. Suggestions?

I'm trying to connect my iPhone 4 to my TV to play videos via use of a new "Composite AV Cable" but only sound will play off TV, not video. I've tried every yellow/red/white input on the TV but to no avail. Any suggestions?

The iPhone 4, unlike iPod, doesn't ask you to set for PAL or NTSC. In fact, in the SETTINGS/Video menu it only asks if you want to "Start Playing From Beginning", "Closed Captioning" and "Home Sharing". I was surprised it had no settings like the iPod at all.

Gargoyle https router logon not working after version 27, when I try and logon it just says the connection was reset. works fine with 27.0.1 must be a bug

I use a Gargoyle quota management router which has web access through https. It works fine with Firefox version 27.0.1 , and has worked for years with no problems. Somewhere after version 27.0.1 a bug was introduced which prooduces the error message "Problem loading page, The connection was reset, The connection to the server was reset while the page was loading" each time I go to the routers address. Reverting to 27.0.1 fixes the problem and it also works fine with Interney Explorer so it is not a firewall problem.

HI techman88,
Thank you for your question. I understand that the password for your router is no longer working in Firefox 27. Please download the new version of Firefox from your working browser and reset the profile.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u>
To reset Firefox go to about:support and and click Reset Firefox. However if there is a saved password in this profile you can manage the passwords under Options > Security> Passwords. Please check this out as well.

Is there a way to print from ipad 4 to a non AirPrint printer? I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer. Is there an app for this or adaptors which could work? thank, Ric

Is there a way to print from ipad 4 to a non AirPrint printer?
I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
Thank, Ric

Printopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
Canon Easy-PhotoPrint
Canon Mobile Printing
PIXMA Printing Solutions

3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...

3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...

Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

HT1296 Is there any way I can transfer the music from my ipod touch to my computer without having to pay for it? Itunes worked fine with my ipod on my old laptop. I am not willing to risk losing all of the music on my ipod to update to the newest iOS.

I really don't want to lose all of the music I have on my ipod touch. It worked fine with my ipod and my old laptop but I got a new laptop and now it doesn't want to sync anything except purchases I made on the ipod and everything that was in the cloud. The rest of the music on my ipod is from old CDs and I am away from home. I would greatly appreciate it if someone could give me some advice. I also don't really want to pay for a download that moves the music into itunes so if anything is free and safe that would be great or if there is a way to do it manually. Again thanks to anyone who has advice to share.

You would have to purchase a 3rd party program ( not supported by Apple).
The ipod is not a storage/backup device.
Copy everything from the old computer or your backup copy of your old computer.

Recently bought new printer. All works fine with one OSX user. However, cannot print anything on other OSX user, including cannot print Adobe PDFs or to new printer. Puzzling!

computer = Mac PowerPC G5
OS = 10.4.11
Adobe Acrobat 7
HP laserjet M1212nf
I recently bought a new HP printer. I was on an admin user when I installed it. All works fine with this admin account/user. I can print to the HP, print to Adobe PDFs.
However, when I then go over to another user account, I cannot print *anything*. I cannot print to Adobe PDF, cannot print to the new HP. If I try to print an excel file, it says "cannot communicate with the printer" along with some useless suggestions. If I try to print a page on FireFox, nothing happens. That is, sure I get the usual dialog box, click the appropriate choice of printer, click the number of copies, then click the OK button ... and nothing happens. No pdf process is started. Nothing is sent to the HP printer.
The fact that both printer options are not working suggests it is some kind of OS problem, not specific to either printer "device".
Any assistance is appreciated! Thanks!

Hi BDAqua,
Thanks for the suggestion. I'm a bit leery of trying that. I would think that if the driver was not installed, then none of my users could use the printer. However, both admin users can use the new printer. The list of available printers is:
Adobe PDF 7.0
New HP Printer
I also used to have Old HP Printer, which I removed. Before, Users A, B and C could use both the Adobe PDF and the Old HP printers. Then, after I added the New HP Printer, it showed up in the list of printers for all three users. However, after I added the new printer, only the two admin accounts, users A and C, can actually print anything. Both users A and C can use the Adobe PDF printer AND the New HP Printer. But I get error messages with user B, for both the Adobe PDF printer and the New HP Printer.

I am buying a new macbookpro which comes with Lion. Lion has Quicktime X. Logic Studio comes with Quicktime Pro 7. Do I have to download Quicktime 7, or will Logic Studio work fine with the Quicktime X player? Will there be a Quicktime Pro X soon?

I am buying a new macbookpro which comes with Lion. Lion has Quicktime X. Logic Studio comes with Quicktime Pro 7. Do I have to download Quicktime 7, or will Logic Studio work fine with the Quicktime X player? Will there be a Quicktime Pro X soon?

your new lion-machine should have quicktime 7, too. if it doesn't, and if it doesn't show up after you migrated your stuff from you old machine you can always reinstall it from the logic dvd's, it's part of logic. my recommendation is to always use quicktime 7, since it's got many features that are absent in quicktime x. quicktime x is nothing but a polished video player. in quicktime 7 (pro, comes with logic) you can even do edits and paste your music onto video files. i use it all the time, especially since logic 64bit doesn't export to video anymore.

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

My iPad is set up for my Apple ID account and works fine with iTunes. But when I try to use it for the App Store, my wife's apple ID shows up, not mine.

My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?

Sign her out and sign yourself in!

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

App worked fine with old SDK, new SDk launches and crashes, font problem?

Similar Messages

Maybe you are looking for