AppCrashes when Installing New 2-18-0001 Driv

I am getting the following AppCrash / Faulting Modules when trying to install the new Audigy 2 drivers (2-8-000):
Faulting application CTHELPER.EXE, version 6.0..36, time stamp 0x4864bea, faulting module USER32.dll, version 6.0.600.8000, time stamp 0x479a7a6, exception code 0xc000042, fault offset 0x00009cac, process id 0x564, application start time 0x0c9202e0c2608f3.
Faulting application READREG.EXE, version 6.0..36, time stamp 0x4864bf6, faulting module USER32.dll, version 6.0.600.8000, time stamp 0x479a7a6, exception code 0xc000042, fault offset 0x00009cac, process id 0xffc, application start time 0x0c9202e0c2608f3.
These occur whether I install as an upgrade to existing 2-2-0002 drivers or as a clean install onto a fresh Vista SP base OS.
Any ideas?
NigelS

Some further info for Creative Tech STaff:
The AppCrashes I reported DO NOT happen with NVidia Graphics Dri've v75.9 & nForce Chipset Drivers v9.46 installed.
However, they DO OCCUR when I am trying to install the Creative Audigy drivers (2.8.000) on Vista SP OS which is using the latest NVidia Graphics Dri've v77.84 & nForce Chipset Drivers v5.32 installed.
Possibly you have a conflict with the latest nForce chipset drivers (v5.32)
NigelS

Similar Messages

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

Error 2324 when installing new version

Got the following error when installing new version.
The installer has encountered an unexpected error. This may indicate a problem with this package. The error code is 2324
Also Tried to uninstall after this so I could install from scratch but that failed too. Now, iTunes is in a complete mess where I cannot use, uninstall or install.
No idea what to do now.

Greetings stain3565,
If you are having an issue with installing an update for iTunes for Windows, I would suggest that you troubleshoot using the steps in this article -
If you can't install or update iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Prompting of Administrator Password When Installing New Software.

I recently installed some software onto my Mac but I was not prompted to enter my administrator username and password as is usually the case (or so I thought).
Does anybody have any ideas as to why an administrator password is not always required when installing new software? The reason I ask is that I thought that this was one of the protections offered by the Mac to prevent unknown installations of Malware etc.
Thanks.

No password will ever be requested when you simply use drag and drop to install an application in the Applications folder. This is because you are a member of the admin group, and the admin group has authorized access to the Applications folder.
Nothing should install without your knowledge. If you are concerned about viruses and the like, then that's a different matter altogether from the question you asked. See this:
Do You Need Anti-Virus Protection for Your Mac?
According to Rich Mogull's article, Should Mac Users Run Antivirus Software?,
"The reality is that today the Mac platform is relatively safe. There are hundreds of thousands of viruses and other malicious software programs floating around for Windows, but less than 200 are known to target the Mac, and many of those are aimed at versions of the Mac OS prior to Mac OS X (and thus have no effect on a modern Mac).
It's not that Mac OS X is inherently more secure against viruses than current versions of Windows (although it was clearly more secure than Windows prior to XP SP2); the numerous vulnerabilities reported and patched in recent years are just as exploitable as their Windows equivalents. But most security experts agree that malicious software these days is driven by financial incentives, and it's far more profitable to target the most dominant platform."
Mr. Mogull is a computer security expert. I recommend reading the entire article as it is quite informative.
For additional information on viruses, trojans, and spyware visit The XLab FAQs and read the FAQs on viruses and spyware.

Office 365 error 259-4 when installing newer Project on top of older ProPlus

Hello,
I am encountering a problem in the following circumstances:
- I install Office 365 ProPlus using version 15.0.4649.1003
- Then I try to install Project from Office 365, but using the newer version 15.0.4659.1001
The setup fails with error 259-4
I found this relevant information in verbose log file:
10/28/2014 12:23:58.767 OFFICECL (0xd9c) 0x1530  Click-To-Run ap3qf Verbose CCS::Publish: start.
10/28/2014 12:23:58.767 OFFICECL (0xd9c) 0x1530  Click-To-Run amcxk Verbose OISVAPI::PublishPackage: packageIdString = 9AC08E99-230B-47e8-9721-4577B7F124EA, versionIdString = 1A8308C7-90D1-4200-B16E-646F163A08E8
10/28/2014 12:24:05.428 OFFICECL (0xd9c) 0x1530  Click-To-Run ap3qg Verbose CCS::Publish: PublishPackage finished.
10/28/2014 12:24:06.879 OFFICECL (0xd9c) 0x1530  Click-To-Run annvi Unexpected Worker::TaskExecutionThreadProc - Encounter OException for task CONFIGURE:{E25A6AFC-9880-4760-9008-4438EBF206B0}. {"MachineID":"981488a4904aad44b1f13142e3395fc6","SessionID":"03dcb06b-2eb1-4a93-b87a-619f39967b2c","GeoID":"223","Ver":"15.0.4649.1003","ErrorCode":"259","ErrorMessage":"ErrorCodeOnly
(ORegistryKey.GetSubKeyNames failure: Cannot get all sub key names for registry HKLM\Software\Microsoft\Office\15.0\ClickToRun\ProductReleaseIDs\Active , Error:0x103)","AppVErrorSource":"","ErrorType":"259"}
10/28/2014 12:24:06.879 OFFICECL (0xd9c) 0x1530  Click-To-Run apm4s Medium Worker::TaskExecutionThreadProc - Encountered fatal exception "ErrorCodeOnly" while executing Task CONFIGURE:{E25A6AFC-9880-4760-9008-4438EBF206B0}.
10/28/2014 12:24:07.144 OFFICECL (0xd9c) 0x1530  Click-To-Run Telemetry aoici Medium Task::DoHandleWorkerExceptionEvent - Task (E25A6AFC-9880-4760-9008-4438EBF206B0) starts handling Worker exception event for task (E25A6AFC-9880-4760-9008-4438EBF206B0).
{"MachineID":"981488a4904aad44b1f13142e3395fc6","SessionID":"03dcb06b-2eb1-4a93-b87a-619f39967b2c","GeoID":"223","Ver":"15.0.4649.1003","ScenarioInstanceId":"D92AAB08-651E-4681-AD6F-59EC6BA860FB","InstallID":"CFFA125D-543D-4081-81A9-3698CD626574","TaskState":"TASKSTATE_EXECUTING","TaskId":"E25A6AFC-9880-4760-9008-4438EBF206B0","TaskType":"CONFIGURE:{E25A6AFC-9880-4760-9008-4438EBF206B0}","Scenario":"INSTALL"}
10/28/2014 12:24:07.144 OFFICECL (0xd9c) 0x1530  Click-To-Run aqdyh Verbose ProcessPool::CreateOMutex - Creating Mutex Global\ClickToRun_TaskMutex_3B2063B8-1A55-431B-9934-D3C4A1AEBC61
10/28/2014 12:24:23.540 OFFICECL (0xd9c) 0x1614  Click-To-Run ama1t Verbose ServiceStartupBehavior::ServiceMain - Notifying timer listener
Once this happens, Office 365 ProPlus just refuses to start, "Office Click-to-run Client has stopped working"
Problem signature:
Problem Event Name: APPCRASH
Application Name: officec2rclient.exe
Application Version: 15.0.4659.1001
Application Timestamp: 5423be93
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.1
Fault Module Timestamp: 4d5f034a
Exception Code: 40000015
Exception Offset: 00000000000761c9
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 4108
Additional Information 1: 1b1c
Additional Information 2: 1b1c5e8386cfb867e421d159fddeb197
Additional Information 3: cf16
Additional Information 4: cf16543464bf843b28ebfef9af01a286
When following the activity using Procmon I don't see any error for the HKLM key said in the log.
Usually when installing again Project, it works and corrects all ProPlus..
But this is very annoying as I would like to deploy ProPlus and Project independently using a deployment tool like SCCM.
In this case, I was testing a machine where ProPlus was installed in an older version, never updated for any reason, and then my tool trying to install Project but in the newer version....
Thanks

Usually when installing again Project, it works and corrects all ProPlus.
Hi,
After installing Project again, what's the version number of your Office 365 ProPlus? Also, try to repair existing Office 365 ProPlus and then install Project again, see if issue persists.
What if you update your Office 365 ProPlus to the same version as your Project build first, then deploy Project upon it?
Trying to figure out if the issue was caused due to the version mismatch.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Installing new RAM and hard drive and installing mac os x

Hello all.
I have a new hard drive and ram for my macbook that I plan on installing. Would it be okay to install both at the same time and then install Mac OS X from the install discs? Or, would I need to install the hard drive first, install Mac OS X, and then install the RAM?
What do I need to do?
Also, when installing MAC OS X from the discs with a new hard drive, will it allow me to do a fresh install as soon as I enter the disc? Or, do I have to restart the computer with the disc in and hold down the C key?
Please bless me with your wisdom.
Thanks.

Hip Hoppa:
Congratulations on installing the RAM and Hard Disk Drive. Now you need first to format the HDD, then install the OS, and restore from backup.
Formatting, Partitioning Erasing a Hard Disk Drive
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger and later) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select GUID Partition Table (Intel Macs)
• Click OK
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Open installer and begin installation process.
Installation Process
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Open Installer and begin installation.
• Select installation option
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger and later).
• Proceed with installation.
• After installation computer will restart for setup.
• After setup, reboot computer.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
• Connect to Internet.
• Download and install Mac OS X 10.5.6 Combo Update (Leopard) or
Mac OS X 10.4.11 Combo update (PPC) (Tiger)
Computer will restart.
• Repair Disk Permissions as previously.
• Go to Apple Menu > Software Update.
• Install all updates.
Computer may restart after updates.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
If you have your old HDD in an external enclosure you can connect it to the computer and use Setup/Migration Assistant to move your stuff from the old drive when prompted.
cornelius

Windows 7 only works when install disc is in the drive

Background:
Macbook Pro 7,1 (13 inch, bought in early 2011)
Mac OS X 10.6.8 (10K549)
Boot Camp Assistant 3.0.4 on Mac
Boot Camp 3.3 on Windows 7
Windows 7 is burned to a DVD. It was downloaded as an ISO through my school's Academic Alliance with Microsoft (a.k.a MSDNAA - Microsoft Development Network Academic Alliance).
Story:
I've been trying to get Boot Camp to put Windows 7 on my Mac for some time now. I've followed the manual/guides for my computer, which in short followed these steps:
Partition drive
Insert Windows 7 disc
Start installation
Install Windows
Download and install Windows updates
Insert OS X install disc
Install Boot Camp
Upgrade Boot Camp to 3.3
That all seems to work well and fine, but sometimes I would have problems where upon restarting I would have to hold the Option key to choose to load Windows, instead of Mac OS - that's fine. I would see the Windows drive and chose it, but then it would always freeze. Eventually I tried leaving the Windows 7 install disc in the disc drive and when I held the Option key I would see the Windows Install disc as an option to boot as well. I tried booting with that chosen, and everything would work fine. That's how I was able to do steps 5-8 in my above list (because whenever my computer had to restarted, I had to choose the Windows Install disc).
Now, with everything installed and updated, and with no disc in the disc drive, I started up my Mac and choose to boot Windows, but it freezes within 10-30 seconds of logging in (just like before). However, with the Windows 7 install disc inserted, and choosing to boot through it, it works. This doesn't seem right.
Anyone have any idea what's going on and how I might resolve this issue?
Thanks in advance; and let me know if I can provide any more information for you.

bought in early 2011
Those Macs do better wtih Lion drivers. Even if you install Lion not on internal drive but elsewhere.
A lot/most burned ISO like yours can even install but are bugged with problems if you didn't also do the burn at the slowest burn speed. Which sounds likely.
Last two: Windows partition was too small and doesn't have the free space for all the updates.
Finallhy, test RAM with memtest either Windows DVD which is a good way really, or from Terminial in OS X (where you can run dozens of little concurrent memtest windows and make short work even doing 5 loops x 256MB memory at once)

Administrator error message when installing new software

Hi~
I am working with an ibook on OS X.2.8. I gave this computer to my dad when I got a new one and set up an account for each of us, both with administrator priviledges. I just tried to install new software and it keeps telling me that I don't have permission to install software on the default location of macintsoh HD and to check with the administrator... even though I am the administrator. It didn't offer me an opportunity to enter a password or to install the software in an alternate location. I tried installing a different program to see if it was a problem specific to this application and found the same difficulty. I tried both accounts and this happened in both. Then I tried setting up a new account as an administrator and this didn't work either. Then I delelted all accounts except for my dad's account. I've checked the permissions in system prferences mutliple times. Nothing works. Any ideas? I would appreciate any help as this is very frustrating and this computer will soon be useless if we are unable to install updates or new software.
Thanks and have a beautiful day!
C

Hi xinaroyall, and welcome to the forums!
This is the Tiger/10.4.x forums, but we'll try to help.
I've checked the permissions in system prferences mutliple times.
You nreed to repair them in Disk Utility, then reboot, but I'd make second admin account again for safety.
Let's see where we are after that.

"Extraction Failed: Cannot Open Output File" error message when installing new drivers

Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer. I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
Extraction Failed
Cannot Open Output File
And the process closes. It happens at about 85% extraction every time.
Any idea why? I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support?? Poor, poor customer service.
This question was solved.
View Solution.

Hi,
If you haven't still got the Full Feature software installer, download it from the link below and save it to your Desktop. If you already have it, place it on your Desktop.
ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Make sure the Printer is disconnected from your PC.
Download and install 7-ZIP. Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ). Connect the printer to your PC when the software asks.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

HT1926 When Installing new version error is quicktime cannot uninstall old version

When trying to install new version of Quicktime, I get a error message that quicktime cannot uninstall old version. This also affects Itunes to work. Get Message Itunes has encountered a problem and needs to close. I think not having quicktime working affects my Itunes from launching.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

Problem when installing new themes in my NOKIA N73

I instal new themes in the memory card of my N73, after time i formated the memory card without (sans in french) deinstaling the thems from the phone, .. they dont appears in my liste of theme.. when i want to reinstal them, the installation dont finished and i have a error message "INSTALATION IMPOSSIBLE!" and in MENU->TOOLS->APPLICATION MANAGER in the journal the themes appears that they are installed, so help me please. () i know that my english is very poor but ......

Here we go again, using the search will have helped but here is how to re-install themes that have already been installed and deleted and can't be installed again or themes that are not showing after being installed.
THIS ONLY WORKS IF INSTALLING ON THE MEMORY CARD
A ) Download Unsis for 3rd Edition HERE
http://www.pietropaschino.com/Varie/Tutorials/UNSIS/UnSIS_v2.5.zip
B ) You'll need the usb cable for connecting phone to pc
1. Install unsis to your PC and open it
2. choose "Open SIS" on bottom left
3. choose the theme you want to reinstall
4. click on "Extract"
5. after a few seconds (sometimes more ) it'll be "Completed"
6. you can now close the program
7. go into the PC installation folder (usually C:/Unsis)
8. there should be a folder called "Temp"
9. inside you should find "private"-> "10207114"-> "import"-> "some folders (just one ifyou extracted just one theme) with different names (numbers and letters in most cases)"
10. go inside the folders and search for the one of the theme you are interested in, there'll be 4 files:
a ) NameOfTheFolder.ini
b ) NameOfTheTheme.mbm
c ) NameOfTheTheme.mif
d ) NameOfTheTheme.skn
11. ok? now, leave this folder open and connect phone to pc using the usb cable
12. choose "Mass storage" option. Note: you can also insert memory card into a memory card reader
13. in your phone, find the folder called "private" . If you don't see it, you need to choose the visualization of hidden files and folders
14. in the "private" folder, find "10207114" folder and then "import" folder
15. in "import" there are your themes, here you should find the themes you installed into the memory card
16. don't close this folder but come back to the folder where you extracted the theme with unsis
17. just click "back" so you can see your folder selected into the "import" folder
18. choose all the folder and select "copy"
19. go back to the "import" folder in the phone's memory card
20. right click and "paste" into the "import" folder
21. here we are, now your theme is again in the memory card
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Error With Configuration Assitant When Installing New Oracle10g

hello,
when installing oracle10g enterprise edition for win32, I am recieving the following read errors. I have tried downloading the installation file several times, and even saving/installing oracle to different drives, but the same error always appears. I have successfully installed oracleXE on this machine (it is still installed). is there a work around for this? this did not appear to be a known error-
the errors ---
ERROR at line 1:
ORA-19624: operation failed, retry possible
ORA-19501: read error on file "C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB", blockno 384 (blocksize=8192)
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 1450) Insufficient system resources exist to complete the requested service.
ORA-19870: error reading backup piece C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB
ORA-19501: read error on file "C:\ORACLE\PRODUCT\10.2.0\DB_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE.DFB", blockno 128 (blocksize=8192)
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 1450) Insufficient system resources exist to complete the requested service.
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 5149
ORA-06512: at line 16

Hi,
have tried downloading the installation file several times
First uninstall enterprise software complete and install WITHOUT database option.
and after installation CREATE MANUALLY DATABASE.
http://dbataj.blogspot.com/2006/11/manually-database-creation.htmlregards
Taj

Error 322 when installing new router

I encounter this error when installing my new router. It says that my new router is not detected or something. Actually, after step 4, its says : New router or gateway not detected.
What should I do or check?
Thanks

Hey first of all try resetting the router reset button in such a way that power
light is blinking on the router & then do a complete network power
cycle i.e., unplug the power cables from the modem & from the router &
then plug in the power cable to the modem first once all the lights are
solid green you could plug in the power cable to the router & check out
it will definately work!!

ISight conflict when installing Google Voice and Video driver

After installing Google Voice and Video driver, the iSight stops working on Flash based applications or websites.
Two camera drivers are installed: Google camera 0 and Google camera 1.
Even if I go to Settings and choose the correct driver (iSight Integrated), it does't works.
The only way I found to solve this issue is removing those Google's drivers (Library/Application Support/Google/GoogleVoiceAndVideoUnistaller).
However, this is not a solution since I can't use GTalk anymore.
Does Flash Player 10.2 fixes this conflict?
Regards,
Flávio Mikami

Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
Now trying to install from there!

AppCrashes when Installing New 2-18-0001 Driv

Similar Messages

Maybe you are looking for