Appdist copy from VMS to NT question ...

G'day Folxs
Does anyone here have a simple way to copy a whole appdist tree for myapp1
say from VMS to NT? I have created a new environment on a NT box and want to
copy down all our application distributions.
eg:
On OpenVMS machine vmsbox1 the directory tree and files
vmsbox1::forte_root:[appdist.aenv_myapp_cl3...]*.*;
should go to NT machine ntbox1
[ntbox1] d:\temp\myapp\cl3\...
Even just to d:\temp\aenv_myapp_cl3\... will do.
ftp doesn't seem to do the trick here. Of cause I could write some routine
to put/get file by file - but before I do all that I thought I ask around if
it's already been done.
Thanks,
Dirk
PS: Needless to say we still develop and makedist on VMS - for now (see
Bulletin 388)!
PPS: No I haven't forgotten about [appdist.aenv.myapp1]*.ace

Hi Joe,
The person you need to contact is
Asa Guillermo [email protected]
They are in charge of implementing the Rally Conversion Service.
Regards
John
Joseph F. Conlon (guest) wrote:
: I may be barking up the wrong tree here, but I'm fairly
desperate
: and could use some help.
: We run RDB and Rally on VMS and are now looking to migrate to
: Windows NT. We have a significant investment of time in our
Rally
: apps and they are critical to our day to day business. We are
: trying to formulate a migration strategy. We are evaluating
: several databases, but thought Oracle to Oracle would be the
: simplest. But it is quickly becoming apparent that RDB and
Rally
: (former DEC products) are like the illegitimate children in the
: Oracle family.
: I have spoken to several Oracle salesmen and a couple of
: technical consultants and have come up empty handed.
: Does anyone on this forum have any knowledge of a service
called
: "Oracle Rally Convert Service Package"? Does anyone have any
: experience migrating Rally applications to NT? Does anyone have
: any suggestions as to where else to turn for information?
: Thank You,
: Joe Conlon
Oracle Technology Network
http://technet.oracle.com
null

Similar Messages

  • RE: (forte-users) appdist copy from VMS to NT question...

    Well, there are some graphic FTP clients for windows that allow
    you to get files from FTP-servers using simple drag and drop.
    Most of them even support the option of selecting a directory
    and dragging it, with all its subdirectories, to your local drive
    with a single mouse action.
    The only problem might be with binary vs. text files. The appdist
    directory has both filetypes. Getting text files as if they were
    binary files may cause problems. Getting binary files as if they
    were text certainly will cause problems. So, either get the
    whole tree binary and hope for the best. Or get each file indi-
    vidually and set the correct bin or asc setting. Or use a tool
    that is smart enough to see if a file is binary or text and hope
    it doesn't make any mistakes.
    Pascal Rottier
    STP - MSS Support & Coordination Group
    Philip Morris Europe
    e-mail: [email protected]
    Phone: +49 (0)89-72472530
    +++++++++++++++++++++++++++++++++++
    Origin IT-services
    Desktop Business Solutions Rotterdam
    e-mail: [email protected]
    Phone: +31 (0)10-2428100
    +++++++++++++++++++++++++++++++++++
    Don't meddle in the affairs of dragons
    'cause you're crunchy and taste good with ketchup
    -----Original Message-----
    From: Haben, Dirk [SMTP:[email protected]]
    Sent: Wednesday, December 08, 1999 6:32 AM
    To: 'Soapbox Forte Users'
    Subject: (forte-users) appdist copy from VMS to NT question ...
    G'day Folxs
    Does anyone here have a simple way to copy a whole appdist tree for myapp1
    say from VMS to NT? I have created a new environment on a NT box and want
    to
    copy down all our application distributions.
    eg:
    On OpenVMS machine vmsbox1 the directory tree and files
    vmsbox1::forte_root:[appdist.aenv_myapp_cl3...]*.*;
    should go to NT machine ntbox1
    [ntbox1] d:\temp\myapp\cl3\...
    Even just to d:\temp\aenv_myapp_cl3\... will do.
    ftp doesn't seem to do the trick here. Of cause I could write some routine
    to put/get file by file - but before I do all that I thought I ask around
    if
    it's already been done.
    Thanks,
    Dirk
    PS: Needless to say we still develop and makedist on VMS - for now (see
    Bulletin 388)!
    PPS: No I haven't forgotten about [appdist.aenv.myapp1]*.ace
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

    Well, there are some graphic FTP clients for windows that allow
    you to get files from FTP-servers using simple drag and drop.
    Most of them even support the option of selecting a directory
    and dragging it, with all its subdirectories, to your local drive
    with a single mouse action.
    The only problem might be with binary vs. text files. The appdist
    directory has both filetypes. Getting text files as if they were
    binary files may cause problems. Getting binary files as if they
    were text certainly will cause problems. So, either get the
    whole tree binary and hope for the best. Or get each file indi-
    vidually and set the correct bin or asc setting. Or use a tool
    that is smart enough to see if a file is binary or text and hope
    it doesn't make any mistakes.
    Pascal Rottier
    STP - MSS Support & Coordination Group
    Philip Morris Europe
    e-mail: [email protected]
    Phone: +49 (0)89-72472530
    +++++++++++++++++++++++++++++++++++
    Origin IT-services
    Desktop Business Solutions Rotterdam
    e-mail: [email protected]
    Phone: +31 (0)10-2428100
    +++++++++++++++++++++++++++++++++++
    Don't meddle in the affairs of dragons
    'cause you're crunchy and taste good with ketchup
    -----Original Message-----
    From: Haben, Dirk [SMTP:[email protected]]
    Sent: Wednesday, December 08, 1999 6:32 AM
    To: 'Soapbox Forte Users'
    Subject: (forte-users) appdist copy from VMS to NT question ...
    G'day Folxs
    Does anyone here have a simple way to copy a whole appdist tree for myapp1
    say from VMS to NT? I have created a new environment on a NT box and want
    to
    copy down all our application distributions.
    eg:
    On OpenVMS machine vmsbox1 the directory tree and files
    vmsbox1::forte_root:[appdist.aenv_myapp_cl3...]*.*;
    should go to NT machine ntbox1
    [ntbox1] d:\temp\myapp\cl3\...
    Even just to d:\temp\aenv_myapp_cl3\... will do.
    ftp doesn't seem to do the trick here. Of cause I could write some routine
    to put/get file by file - but before I do all that I thought I ask around
    if
    it's already been done.
    Thanks,
    Dirk
    PS: Needless to say we still develop and makedist on VMS - for now (see
    Bulletin 388)!
    PPS: No I haven't forgotten about [appdist.aenv.myapp1]*.ace
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

  • Address not copied from Sales order/Delivery to Shipment Document

    Hello Experts,
    I need your help on Addrss of ship to in shipment document.
    Sales Order[VA01] >> Delivery [Vl01N]>> Shipment [VT01N].
    User changed the Address of ship to party (Header level) in Sales Order and It reflected to delivery as well and I believe It should also update the address in Shipment document.
    But when I checked the Address of the Customer/Unloading point in Shipment Document [VT03N] (as below) I found It was not updated It was same as Customer Master Record and I believe It directly copied from Customer Master Record.
    BUT While creating the Shipment system is copying the data from Customer master Record not from Sales Order /Delivery. Logically system should copy the updated address from Order/Delivery BUT It is directly copying from Customer Master i don't know where is the setting of this ??
    Can anybody help me on this ? How system takes the customer (ship to party) address in shipment ? Where are the setting of these.
    What I need to do so system take the updated address from Sales Order/Delivery not from Customer Master Record (Ship to party).
    Can I change the address of customer in shipment document ??
    Awaiting your precious reply.
    Thanks,

    Hello Samir,
    Thanks for your response.
    I think you get my question in wrong way.
    I am sayingCustomer master data was not changed.
    User just changed the Address in Order (Order > Header >> Partner tab >> Change ship to address/overwrite ship to address).
    Overwritten Address / Updated address are copying in Delivery BUT not in Shipment document.
    What I need to do?  system should copy the updated address from Sales Order/Delivery BUT it is copying from Ship to party.
    I hope this time i am clear to explain my issue.
    Thanks,

  • What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)

    I feel like I should know the answer to this. I can't believe it is a hard question.
    What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)
    Easy? Right?
    Just plug my iphone in to a mac and copy a photo from the mac to my iphone.
    I don't have internet access - I can't email it, or mobileme it, or dropbox it.

    iTunes. Other than that there is no direct method. However, do try the iPhone forums.

  • -36 I/O Error copying from one external drive to another? Ugh...help?!?

    Hardware:
    Apple Powermac Dual 2.5 GHz G5
    512 MB RAM
    External Drive 1: LaCie 250 GB (Firewire 800) (contains 150 GB data) (formatted MacOS Extended)
    External Drive 2: LaCie 400 GB (Firewire 800) (contains NO DATA) (formatted MacOS Extended Journaled)
    Software:
    Mac OS 10.4.3 (Tiger)
    I've sucessfully run the firmware updater (http://www.lacie.com/support/drivers) "LaCie Update Tool v1.3.3" for both LaCie drives to the latest version - 107.
    Background:
    Before I updated to the latest firmware and before I changed Drive 2 to journaled, I had problems copying files from both drives to the other. I get this error: "The Finder cannot complete the operation because some data in "filename here.ext" could not be read or written. (Error code -36)."
    I did some research (http://www.appleerrorcodes.com/) to discover that Error -36 is an I/O error.
    My goal is to reformat Drive 1 (250GB) to journaled. After some reading, I have decided to do that for both of my external drives.
    Question:
    I'm at the point now where I need to copy the data from Drive 1 to Drive 2 and this error is still occuring. I need to 1) understand why it's happening and 2) find a solution so I can copy this data from Drive 1 to Drive 2.
    Future Question:
    Once the data is copied, I will then reformat to journaled. I'm then going to decide between scheduled backups or setting up a RAID, but I'll post this issue as a separate question. I first need to understand and fix this copy I/O stuff.
    THANKS!
    Dual 2.5 GHz G5   Mac OS X (10.4.3)  

    Using the Disk Utility with the Mac OS, I just realized that I can't verify or repair disk permissions on either of these external LaCie drives. I can on my startup internal disk, but not the external ones. Any idea why?
    I replaced the FW800 cables, but I still cannot copy from one external to the other. The connections are like this:
    Drive 1 (250 GB) is connected to the back of my G5 via FW800.
    Drive 2 (400GB) is connected to Drive 1 via FW800 cable.
    I'm in need of some help!
    Robert
    Dual 2.5 GHz G5   Mac OS X (10.4.3)  

  • Credit Memo Copy From Issue

    I have an issue with 2 specific users on the system,  Both Users are 'Professional" users with Full Authorization to all Modules on the system.
    When the two users go into Credit Memo entry,  enter a Customer then Click the  COPY FROM button,  only 2 Open Invoices are displayed in the Invoice Window for the particular customer.  There are MANY Open Invoices for the Customer.  This is NOT specific for this customer,  BUT All customers behave this way for the 2 users in question.
    ANY OTHER USERS on the system can see All open Invoices when using the Copy from feature.
    We already gave full Authorization to the users.  Turned off Authorizations, and updated and the gave the users Full authorizations and updated.  The users were NOT logged in at the time of the changes to the user's Authorizations.
    There are NO Add ons running for the users in question.
    We also copied  Authorizations from a 'Working" user to the users in question but there are no effect.\
    Is there something OTHER Than authorizations that could cause this problem? 
    Any other ideas or suggestions  would be appreciated!!
    Thanks in advance!!
    Dana

    Have you implemented Data Ownership Authorization?  NO
    What is your B1 version and PL? SAP B1 2007 SP00 PL47
    Again,  it is only effecting 2 users with Full Authorizations and Professional License.
    The Invoices displayed are owned by a different user and other invoices owned the
    the same other user are not displayed.

  • Cannot scan, fax, or copy from HP Officejet 6500 All-in-One E709a

    I can print from my HP Officejet 6500 All-in-One E709a, but I cannot scan, copy, or fax.  All drivers and updates are current; no recent updates were made prior to the problems occurring. I use Windows 7 64-bit.  When the printer is turned on, it always shows Original Loaded, but no documents are in the feeder or on the glass (I have already cleaned the glass and have ensured that the cover sits tightly).  I am having problems scanning, copying, and faxing. The automatic document feeder is functioning.  I have tried to reset the printer several times.
    When I try to Scan a document in the document feeder (it does feed through) or from the glass, I get variable responses – rarely, it appropriately asks how I want to save/handle the doc (e.g., save as pdf), but the document does not actually scan and I am directed to Reload the document OR it displays No Scan Options. The document does not show in My Scans.
    When I try to Copy, it shows the document as copying, but there is a long delay before the progress bar occurs.  When I copy using the document feeder, I actually get a copy (rarely and always faded-looking) or the copy prints out blank—both results are always followed by an error message to Reload the document.  When copying from the glass, the copy prints out blank with an error message to Reload the document
    The same problems occur when trying to Fax.   Whether trying to scan, copy, or fax, the printer is making a lot of sounds of gears whirring. 
    Again, I can print a document from my PC without any problems – the problem is limited to scanning, faxing, and copying.
    I have tried the HP Print & Scan Doctor.  It always stops at the HP Twain Scan step, saying the Scan process was cancelled by the user (not true).  When I click on Continue, it proceeds down to the Test Scan step, but nothing happens when I click on the Test Scan button.  It will only allow me to Skip at that point.   All of the other steps show green checks.
    This question was solved.
    View Solution.

    My first question is really going to get to the core of the issue, I heard you say that the printer makes sounds, but if you lift the lid does the bar A) travel across the screen and B) light up? 
    Additionally, perform both of these resets and let me know how they go! 
    HP Multifunction Printer Resets - HP Officejet 6500 - YouTube'
    Have a great day! 

  • Edit goods receipt copied from approved purchase order?

    Hi everyone
         Is it possible to edit quantity field or add a new row to a goods receipt copied from a purchase order that has been approved ?
      if  this behavior was changed from past releases or it always was like that?
    i appreciate your help and thanx in advance
    (any link to a official document, guide, how to doc that describes this point would be great)

    hi gordon thanx for your response
    just another thing before i mark my question as answered, is there a official guide or SAP document that describes every detail of approval procedures including this question?
         once again i appreciate your kind help.
    Aley Chena

  • HT201269 I just bought a 5S Iphone and will be retiring my Iphone 4.   The music copied from Itunes to my new phone, but the apps did not.  How do I get the apps to copy to my new Iphone?

    I just bought a 5S Iphone and will be retiring my Iphone 4.   The music copied from Itunes to my new phone, but the apps did not.  How do I get the apps to copy to my new Iphone?

    The same way they were put on the previous iPhone, sync them.
    Alternatively, read the article from which the question was posted and follow the explicit instructions provided.

  • How do i copy music on my nano to a new computer (the old computer hard drive crashed).  None of the music was purchased from itunes, it was copied from cd's

    my old computer hard drive crashed.  i have music on my ipod nano - none of it purchased through itunes, all copied from cd's.  how do i copy what is on the nano to a new computer.

    How to use your iPod to move your music to a new computer using iTunes7
    http://docs.info.apple.com/article.html?artnum=300173
    How to use your iPod to move your music to a new computer using iTunes6
    http://docs.info.apple.com/article.html?artnum=304304
    Copying from iPod to Computer threads...
    http://discussions.apple.com/thread.jspa?threadID=776996&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=805256&tstart=0
    http://discussions.apple.com/thread.jspa?messageID=797432&#797432
    Also these useful internet articles...
    http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
    http://playlistmag.com/help/2005/01/2waystreet/
    iPod: Frequently Asked Questions
    http://docs.info.apple.com/article.html?artnum=60920
    Patrick

  • Copying from external drives repeatedly fails

    Hello!
    I have repeatedly had the same problem with my computer and external drives. I have 2 hard drives (150 gig Western Digital in an external USB 2.0 enclosure, and a 160 gig Maxtor in an external Firewire and USB 2.0 enclosure) from which I often cannot copy. I've never had problems writing to the drives, but sometimes copying from them freezes.
    I am a professional photographer and at any given time I'm working with far too many photos to fit on my laptop, yet I often need a particular project on my laptop so I can edit on the road. So I'm frequently moving projects to and from these drives.
    This problem is not only with photos, however. When I recently reformatted my hard drive (too many old programs installed and it was faster to just start over from scratch to clean up the drive), I first made a backup onto each of these external drives. But when I went to copy my iTunes library back onto the laptop the copying would freeze. I'd relaunch Finder and start it again and it would freeze on the exact same file. I did all the disk utility first aid operations on my laptop drive and the external drives and it still happened.
    If I connect the drive to my XP computer and transfer the files over my LAN then there's no problem. Makes me think the files are fine, as is the drive's integrity. Oh, and no problem copying these exact same files from one drive to the other, or from an external drive to the internal drive with the XP computer.
    When this problem is happening it doesn't matter which drive I use or by which interface, it always freezes on the exact same files. But if I open that file from the external drive in the appropriate application it reads it just fine. It's only when I'm copying the file. And it doesn't matter if I copy 10 gigs at once or one file at a time, the same files freeze up. If this was just one file every 6 months I could probably deal with it, maybe even just delete it and move on (as I've done with MP3s, since I own all the CDs and can re-rip the song). But when in a set of 10 gigs even if I delete one photo it freezes up again another couple hundred megabytes later.
    I'm baffled. I don't know what to do. The fact that it happens with multiple drives and multiple interfaces makes me think that it isn't a problem with the external enclosures or those drives. The only things in common are the exact files I'm transferring and the PowerBook.
    I'm really frustrated because I've found a situation where my XP box performs better than my Mac, and I'm a little shaken up about it.
    Any ideas?
    - Jon
    12 PowerBook G4 1.3GHz   Mac OS X (10.3.9)   1.25 gigs, combo drive, all updates installed except Tiger.

    Yes, it's from a camera.
    Again, the file is not corrupt. It can be read by my Windows XP computer, opened in Photoshop, and all the data is present. And if I remove the file that isn't copying and start over it freezes on another one later. And then another. And another.
    I was forced to edit this wedding on my Windows box (with an older version of Photoshop - much slower than using CS2 on my Mac) because I have been unable to copy them to my PowerBook. This is incredibly frustrating. I've run all the disk utilities on my Mac and on the external drive. Nothing has improved the situation.
    This question has not been answered. Please help!

  • Is there a way to import clips from AVCHD folders I have copied from my camcorder to my hard disk? With FCE I could import these clips using log and transfer.

    In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk?  With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files.  If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).

    Hi jphil and Tom
    I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
    Folder structure is
    AVCHD
         BDMV
              CLIPINF
                   .CPI files
              Index.bdm
              Movieobj.bdm
              PLAYLIST
                   .MPL file
              STREAM
                   .MTS files
    AVF_INFO
         3 files (.bnp, .inp, .int)
    DCIM
         101MSDCF
              empty
         MODELCFG.IND (file)
    My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
    I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
    I downloaded the latest version of codec updates from the Apple support site but no difference.
    Thank you in advance
    Giorgio
    Freiburg, Germany

  • Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

    Hi Experts
    I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
    Please share.
    Regards
    Sandeep

    Hi Ritesh
    Thanks for your reply,
    I checked  both of these transaction  we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
    In PO VC configuration is called for class type-300  and  in GRN VC configuration  is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
    Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
    yes we have activated Mill Functions in our ERP box.
    Regards
    Sandeep

  • Copying from microsoft word into my application

    I am copying from microsoft word into my application..
    and them on submit, i am calling a procedure i get the following error
    Caused by: java.sql.SQLException: ORA-01460: unimplemented or unreasonable conversion requested
    i think its down to special characters used.. like apostrophe is different in word then normal.. anyone got solution for this error not to occur?

    74 questions, 72 unresolved.
    And this one: sadly we are not looking over your shoulder, so we don't know what 'copying' means, which version of Word, which 4-digit version of the database, and which SQL statement fails.
    Sybrand Bakker
    Senior Oracle DBA

  • Price Not Copied from PR to PO with EFB parameter (Function Authorization)

    Dear All,
    We are doing upgrade of our system from SAP 4.7 to ERP 6.0 system.
    I am using the configuration at following path to copy price from PR to PO.
    SPRO: Materials Management > Purchasing > Authorization Management > Define Function Authorizations for Buyers > Function Authorizations: Purchase Order > I have created Function Authorization > Tab > General Parameters > Adopt PO Price.
    Well, the same functionality works in SAP 4.7 system, but it doesnot work in ERP 6.0 system.
    Can you please help me?
    Kind Regards,
    Prakash
    Edited by: Prakash Ayer on Mar 31, 2009 4:05 PM

    If you have implmented the functionality as given in OSS note: 393337. Then the price is copied from PR to PO.
    I am referring to below functionality:
    Contents form OSS note: 393337.
    Customizing was not set to be able to adopt the price.
    Field EBAN-BPUEB is therefore equal value ' ' at the time the purchase
    requisition is used to generate a Purchase Order.
    Solution
    Change customizing accordingly:
    Function Authorizations are set up up in the IMG:
    Material Management -> Purchasing -> Authorization management ->
    Define Function Authorization for Buyers.
    In here choose: "Function Authorizations: Purchase order"
    In here you may specify a number of Function Authorization keys.
    For each key, you may set rights for the key.
    The field in question is "Order price adoption" (T160D-EBPUEB) which
    must be ticked.
    Then back out and now choose "Maintain Users".
    In here choose tab "Parameters" and enter parameter ID "EFB" along
    with the value equal to the key you just maintained.
    (Remember to use Capitals when entering the key value)
    In ME51N in the item detail screen, tab "Valuation", the field
    "PO price" will now be visible and can be maintained via a dropdown.
    The field will have following possible values:
    - "Do not adopt"
    SAP Note Nr. 393367 01.04.2009 Page 1
    - "As gross price" and
    - "As net price"
    equivalent to the values ' ', '1' and '2' in field EBAN-BPUEB.
    When '1' or '2' a price will be transferred to the Purchase Order when
    the purchase requisition is referenced.
    Can you please me?
    Thanks and Regards,
    Prakash
    Edited by: Prakash Ayer on Apr 1, 2009 4:50 PM

Maybe you are looking for