Append Multiple Control Images as a 2-D array/table ?

All
I am trying to generate a report and I wish to have the following pattern:
Image      Blank      Image
Blank      Image      Blank
Image      Blank      Image
Where I intend to place my control images at "Image" and no image at "Blank"
I thought I can build a table of control images and append but it accepts only string/numeric tables.
Is there a easier way to include images into WORD report, equivalent to: me inserting a 3x3 table in a word document, and pasting images in 1st row 1st column, 1st row 3rd colum, 2nd row 2nd colum, 3rd row 1st column, 3rd row 3rd column.
Please let me know, thanks
Kudos always welcome for helpful posts

That example was cool. I wish to add images to table using control reference.
I tried using the control reference to get image, save as a png and then use it to add images. Is there a way that I can use the control reference to add images to my table directly ?
Kudos always welcome for helpful posts

Similar Messages

How could I arrange control images in a report?

I appended 4 control images to a report using Append Control Image to Report. I wanted to lay two of these images in the first line and the other two in the second line. But the result of my program was one image in one line. (BTW, I did not use any New Report Line). How could I arrange control images?

Mike is right, unless the images are too wide, the report VIs will put them next to each other on the same line.
Please find the attached example that appends two charts on the HTML report. Open the .htm file with the web browser. If you make the browser window smaller, the charts will move one below the other.
Zvezdana S.
Attachments:
image.zip ‏13 KB

Cluster not saved correctly in Append Control Image to Report VI

[LV8 with Windows XP]
I'm using the Append Control Image to Report VI to save the image of a control to Word (the same problem occurs if I save to Excel). This VI seems to work fine with all my controls except clusters. Not all of the contents of the cluster show up in the saved image. I have to expand the edges of the cluster way beyond the cluster contents in order for all the contents to show up in the saved image. Is this a bug? Is there a way to "realign" the contents of the cluster within the boundaries?
George

Hi,
just had a customer with the problem with this cluster picture function and I wrote a little VI that manually gets the picture, resizes it to the cluster and the rest is up to you. The only thing is, that you have to place the "zero point" of the frontpanel in the upper left corner to get the proper image.
For Users who want to upgrade: This issue is fixed with the next LabVIEW release.
Best Regards,
Andreas Pistek
~~~ Logic is a systematic method of coming to the wrong conclusion with confidence ~~~
Attachments:
better picture.vi ‏19 KB

I can't append control image to report on 1 page with appended text report

I am attempting to create a report which is simply header, experiment information, and two graphs of data. I am using a Easy Text Report and Append Control Image to Report. I have successfully printed out this report, but on two separate pages. The header info is on the first page, and the graphs on the second page. This doesn't seem to be a margins problem, as the header is very brief and the graphs aren't that large either. I would like to make this into a one page report. Any help is greatly appreciated.
Message Edited by csmrunman on 01-15-2010 10:18 AM

Nevermind. I neglected to see the Append Report Text.vi. That solved everything.

Append control image

Hi,
I Have a problem with the append control image to report VI. I Have a Array of clusters that contain 3 numeric indicators and 2 vertical pointer slides. When i try to append this iamge to a report, the picture thats appended downt contain the whole control, and has some weird artefacts. With other controls the append control image to report vi works fine.. Is this a bugin LV 8.0 or am i doing something wrong?
Thnx
Bart
Labview CLD , Engineer/Manager
Promedes and DSM
using LV 7.1, 8.0, 8.2, 8.5 and 2009 SP1
http://www.promedes.nl

Ok here is an example, the cluster is being appended in the subvi
Labview CLD , Engineer/Manager
Promedes and DSM
using LV 7.1, 8.0, 8.2, 8.5 and 2009 SP1
http://www.promedes.nl
Attachments:
subvi.vi ‏35 KB
problem.vi ‏14 KB

Append control image requires vi to be open

Having a curious problem with the append control image vi in the report toolkit.
I'm using LV8.6 with the current report toolkit .
I have an application that merges the information from 4 sections into one html report.
Using the append control image vi I add images to the report in two subvi.
When the subvi are open on the desktop everything works fine.
As soon as I minimise them to the toolbar or open them up so the image I am grabbing is not fully visible, I either miss the image entirely or only capture a portion of the image.
Am I doing this wrong?
Is there a workaround or better method to achieve this ?
I am trying to avoid using word or excell as these products may not be available on the target machine.
henry

Hi Henry,
From what you are saying it sound very similar to KnowledgeBase 339HAFUW Append Control Image to Report Does Not Update the Correct Value of my Hidden....
I made a subVI that writes to an indicator and then in the main VI I use that indictor’s reference as the input to the Append Image VI. I write to an HTML report and the image appears fine for me. During this time I never the subVI opened. However, if I open the subVI and then minimize it I notice that blanks images are outputted to the HTML file.
I will be investigating this behaviour a some more.
I have attached my VI for reference.
Message Edited by DiscoBall on 05-01-2009 03:21 PM
Message Edited by DiscoBall on 05-01-2009 03:21 PM
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources
Attachments:
cvilv.vi ‏12 KB
time.vi ‏6 KB

Append Control Image to Report stops Source Distribution from working

I have a top level built executeable that calls various external vi's using the "Call by Reference Node" function. This seems to work ok, to a point. An additional point here is this is code that I had running well in LV8.2 and am now trying to get running in LV2010 as there have been some significant changes in LV that have impacted on this project and this has forced me to change things.
The external vi that is called is stored in a "Source Distribution" directory structure, which has been generated via its own project specifications. An examination of the directories and vi's stored at the destination looks like everything should be there.
When it comes to running the vi in the source distribution directory (from the top level built executeable) I get the following error message "Error 1003 occurred at Open VI Reference in Run HTML Report Generation VI LV10.vi->Generate Reports.vi", with the additional suggestion " The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Select File>>Open to open the VI and then verify that you are able to run it.". So it looks like there is something missing in the "Source Distribution" directories.
Doing as suggested, opening the vi in the "Source Distribution" with the development environment, shows that it has no broken arrow. My suspicion is the development environment is supplying whatever it is missing.
Using the built top level application, using trial and error and using the diagram disable structure, I have narrowed down the location of the problem to an "Append Control Image to Report" sub vi (its from the NI Report menus). Disabling this vi at the level it is called, allows the "Source Distribution" vi to run.  "Append Control Image to Report" is part of a class structure and I must say I have not used class structures so my understanding of their implications is very limited.
If I instead dive into "Append Control Image to Report" vi and disable the vast majority of its diagram (everything in the "No Error" case), the original error pops up again. Bit strange considering there are only controls and indicators and a case statement left.
I would appreciate any suggestions, as this has got me stumped. Hopefully I have made myself clear enough as it is all a bit complicated. Let me know if I haven't. Thanks.
Herbert Niesler

    Hi Caleb,
      "When the VI displays the broken arrow and displays that error in the dialog, does it take you to a particular diagram component? Does the diagram have any broken arrows or something?"...      it doesn't take me to a particular diagram. Is this possible in the RTE? If it is how do I enable it?
   I can follow the chain of broken arrows (front panel only) down to my vi that calls the NIreport vi that is causing the problem. However I am unable to open the NIreport vi's in the RTE, so cannot chase this any further down the call chain.
I have tried opening the offending top level vi (on a network drive) and it opens ok. When I close it, it wants to save some changes which i think might point at where the problem is. The attached file shows the screen shots of the "Explain Changes" window. Hopefully they mean something to you.
       Cheers
                Herbert
Herbert Niesler
Attachments:
Explain Changes.jpg ‏46 KB

Bug in Append Control Image to Report in 8.5?

I am now at an end with this. I seem to have some sort of problem when using the Append Control Image to Report. I have a program that creates two reports. One is a condensed version, the other detailed. Both reports contain JPG images of some front panel displays. For the most part it seems to work except what ever it is doing appears very unstable. The problem seems to center around me trying to include a Multicoulmn Listbox. I create a Reference of it and then run that to my Append Control Image, just like any other image I want to include. If I probe the Reference, it appears to be correct, i.e. the name, etc. all seem right. However, what the image that gets included is a whole different graphic. Some times I will get the listbox, other times nothing at all. If I look in the directory and bring up the images, indeed, if it prints the wrong graphics, it also has created two of the ne that it includes.
Running the same program unmodifed seems to do the same thing, i.e. it always will print the wrong graphic. As I have tried different things to try and skirt the problem, I get different effects.
I have seen the same problem with other graphics as well, not just the listbox, but I can't come up with any hint as to why it does what it does.
Attachments:
LABVIEW_err.jpg ‏18 KB

I have dug into this a little further and it appears this bug has to do with creating two reports at the same time. If I only generate a single report, everything works flawless.
I placed the sections of the code that append data to the reports into a sequence so they would not happen at the same time. This seemed to have some effect, but the reports were still incorrect.
Is LabView just not able to create two reports within a single progeam?
I can work around this by creating just the detailed report for now, but it would sure be nice if there were a way to make it work.

Print report and append control image to report.vi problem

why print report.vi and control image to report.vi can't executable in xp service pack 3??
before that, i use xp service pack 1. these sub vi can use successful. but after i transfer all ni file into xp service pack 3, that sub vi can't executable..why it happen???
please, help me...

When you said that you used your VIs in service pack 1 and then transferred to Service pack 3, are you referring to 2 different computers or you simply updated the computer with SP1 to SP3?
If you are using 2 different computers, were all the software and the toolkit also installed in the pc with SP3? I am using XP with SP3 and I am not having any problems with the print vi.
If you have more information, like if you get an error message, kindly post it here as well.
Best regards,
Mary Anne
.....YOU WONT LEARN IF YOU ALREADY KNOW.....

Problem with Append Front Panel Image To Report.vi

I'm using LV 7.0 with the MicroSoft Report Generation toolkit installed. Under the Report Generation palette there exists an Append Front Panel Image To Report vi. Also on the same palette there is an Easy Print VI Panel or Documentation.vi which uses another Append Front Panel Image To Report vi located under the VI Documentation subpalette. Here is the problem; I have serval vi's that use Append Front Panel Image To Report.vi from the Report Generation palette and I have a couple of vi's that use the Easy Print VI Panel or Documentation.vi which is linked to the Append Front Panel Image To Report.vi located under the VI Documentation subpalette. Clear as mud!
This creates a conflict of intrest. In a nut shell th
ere are two vi's with the same name in different locations doing different things. I have a program with subvi's that need to call each respective Append Front Panel Image To Report.vi and that just is not working.
Is this a known issue with LV7.0 that has already been addressed and/or resloved?
Thanks.

ATC Herman,
Based on the picture you posted and what you are describing, it looks like you might have an incomplete install. What version of the toolkit do you have? Was it first installed on an earlier version of LabVIEW, or did you install it first on 7.0? Your VI Documentation Palette appears the same as if you hadn�t installed the toolkit. I�ve attached a screenshot of what it should look like. The VI in question is a polymorphic VI, which may be causing some of the confusion. If you right-click on it and select �Open Polymorphic VI�, it will show you what options you have, depending on the input. I opened both test and test1, and they appeared the same for me. I was able to have them both on the block diagram. The path to bo
th of them was C:\Program Files\National Instruments\LabVIEW 7.0\vi.lib\printing\ReportDocExtensions.llb\Append Front Panel Image to Report.vi. The .llb ReportDocExtensions has the polymorphic VI, as well as copies of each of the possible instantiations. Make sure you have these VI�s in the .llb in that directory.
There is a KB on having the toolkit on multiple versions of LabVIEW and what files you need. Make sure you have all the files listed.
Please let me know if you are able to get to the bottom of the issue with the above information.
Thanks, and have a happy day!
Robert M
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments
Attachments:
Report_Palettes.JPG ‏57 KB

Printed front panel graphics quality (Print Panel to Printer method vs. Append Front Panel Image to Report.vi)

LV 6.02 (or 6.1)
NT 4.0
I have a vi that the front panel includes all the information I need to print except that it is on different pages of a tab control to conserve screen space. I was attempting to programatically cycle the value of the tab control in a For loop and invoke the Print Panel to Printer method to print 7 pages of the front panel, each with a different tab page selected. The printouts were excellent quality but beginning with the second consecutive Print Panel to Printer method the on screen front panel image of the VI being printed would become jumbled (sometimes, by the time 7 printings were done, the entire front panel image would disappe
ar and a bitmap of the desktop or underlying windows would be visible in the VI's panel frame) yet the subsequent Print Panel to Printer methods continued to print the panel as they should appear. The visible front panel graphics would never return to normal and the only solution was to close the vi (in the dev system) or exe (compiled) and re-launch. I tried a lot of things (like hiding the panel to print before printing and showing it after printing) with no luck. It appears that two or more of these consecutive invoke methods caused the problem regardless of whether the tabs were cycling, or even if there was no tab control and much fewer controls on the panel to be printed than normal. I also had the same problem with LV 6.1.
Finally, I was forced to switch to the report generation toolkit vi's, I cycle through the tab pages and use the Append Front Panel Image to Report.vi to append each image to the report. This is faster and control returns to my program quicker but I a
m unhappy with the printed quality of the graphics of the front panels. They are not as high of resolution as those generated via the Print Panel to Printer method.
Any suggestions?

You might try changing the way the VI is printed by going to tools >> options >> printing. Try the postscript and bitmap settings.
Jeremy

Cannot Control Image Position in RoboHelp When Linking To FM Files

We are using TCS 3.5 on Windows XP Pro. It has taken a lot of work to get our mapping from FM to RH to work correctly, and we now remain with one outstanding task that I cannot figure out: controlling the position of images in the RoboHelp output.
The images appear arbitrarily justified left, center, or right in RoboHelp itself and in help outputs. I should also add that this is happening with both structured and unstructured FM files. Typically, the output I'm working with is WebHelp or WebHelp Pro.
I've turned to the "Object Properties" and "Anchored Frame" pods in FM looking for settings that might be contributing to this behavior, but have not found anything that appears to connect settings there with the image behavior in RH. In the structured FM files, I had some suspicions that complex if/else conditions controlling image position might somehow be contributing to this problem. But the conversion settings in RH don't allow those EDD rules to carry over.
I also turned to the "Conversion Settings" in RH and played with some of the options for "Images" there, unticking or ticking "Use Distiller to Generate Images" and "Do Not Regenerate Images."
Our online help now looks pretty clean, since all the styles are mapped, with the exception being these wonky images everywhere.
I would certainly like to determine the root cause of this behavior, because we're using this FM>RH workflow to create online help systems for hundreds of legacy FM documents that encompass thousands of such images. I want to fix this in the mapping and not touch the original images, if possible
However, if anyone has the answer regarding the best practice for generally controlling image behavior in structutured and unstructured FM to RH, I would be eager to learn these details as well.
Thanks in advance,
Douglas

I believe it is. And I have had the same problem with tables.
I made multiple posts about the images trying to describe it in different ways, but all I got were crickets chirping on the forums. I finally called Adobe technical support. Their initial reaction was to show me how image mapping did work correctly with freshly minted FM files and RH project. I had to draw them back into real world scenarios by giving them my source files to recreate the issue. At this point they admitted something was amiss, and one rep even slipped and said it was a “known issue.” They promised to get back to me with a resolution. But despite 4 additional attempts contacting them, and they now just ignore my e-mails.
I am very disappointed in the way Adobe has handled this matter, both from a development and a support standpoint. It would do all of us users a world of good if they admitted these flaws in their release notes, and offered possible workarounds. Maybe there is no workaround, in which case it explains why they don’t admit it? But beyond poor software development and bug fixes, I think it’s sad that they don’t follow up on support.
Adobe seems to assume that tables and images are going to carry over from FM to RH correctly, so you get no fine tune controls, like you do for character and paragraph mapping, and I think this is the crux of the problem.
I got those tables working in my projects just by dumb luck, but I still have no control over them. The images…they still represent a huge problem for our company. We invested an enormous amount of resources into a RH migration, hoping to continue to use FM. But now we have issues with no apparent resolution. It’s making us regret our decision and reconsider our initial considerations to move to MadCap Flare and/or a component content-management system.
If you have any luck making headway with the issue, I would love to know more.

How to make single file from multiple PDF image?

Hi, it's my first question in SCN.
I promise my efforts for developing this site.
Lately, I made multiple PDF image by function 'CONVERT_OTFSPOOLJOB_2_PDF'.(each spool ID)
And I wanna make single .PDF file by merging these image in server directory(not local PC).
So I tried it following.
1. Each internal table resulted from CONVERT_OTFSPOOLJOB_2_PDF append one internal table.
   BL_PDF + MF_PDF → PDF
2. Excute following command.
OPEN DATASET P_FILE FOR OUTPUT MESSAGE LV_MSG IN BINARY MODE.
IF SY-SUBRC = 0.
    LOOP AT PDF.
      MOVE PDF TO FIELD.
      TRANSFER FIELD TO P_FILE.
      CLEAR PDF.
    ENDLOOP.
    CLOSE DATASET P_FILE.
ENDIF.
But files was not merged, only last image was made as .PDF file instead.
How can I do it?
Thank you.

Hi Sangrok,
Instead of preparing PDF multiple times, you can combine all the OTF data and then finally convert it into PDF. For saving the PDF onto application server, you can refer following report.
http://wiki.scn.sap.com/wiki/display/Snippets/To+convert+spools+to+PDF+and+place+it+in+Application+server+with+the+Generated+Partner+ID
Regards,
Aditya

FCP 10.1.3 multiple graphic images into one frame

Hi - How do I put multiple graphic images into one frame? - so it kind of looks like a video wall - except these are still images. I can do it manually but it's not precise. Anyone found a way other than this? Thanks.

Here is my quick and dirty generator called "9 Pictures": https://www.dropbox.com/s/92c536wgesh2yzj/9%20Pictures.zip?dl=0
To install it, unzip the file and place the folder inside /Users/yourname/Movies/Motion Templates/Generators
It will look like this in FCP X. You just have to click each drop zone icon in the inspector and then select the desired clip from the browser. Use the Pan and Scale controls in the inspector to select which part of each image you want to use. Note: this was done in the hope that it may be helpful, but it is no more than a quick thing. You can also control-click the generator in the generator browser and choose open in motion (if you have it) to see how it was done and to modify it.

When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh

When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh

for purchases from the iTunes store do this:
connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
for everything else check out this post by Zevoneer.

Append Multiple Control Images as a 2-D array/tabl​e ?

Similar Messages

Maybe you are looking for

Append Multiple Control Images as a 2-D array/table ?