How could I arrange control images in a report?

I appended 4 control images to a report using Append Control Image to Report. I wanted to lay two of these images in the first line and the other two in the second line. But the result of my program was one image in one line. (BTW, I did not use any New Report Line). How could I arrange control images?

Mike is right, unless the images are too wide, the report VIs will put them next to each other on the same line.
Please find the attached example that appends two charts on the HTML report. Open the .htm file with the web browser. If you make the browser window smaller, the charts will move one below the other.
Zvezdana S.
Attachments:
image.zip ‏13 KB

Similar Messages

How can I place an image in an Report without it getting pixelated

Hello,
I am creating a report from my program using NIReport. In my report, I have graphs and images that are being placed in the report. My current method is using a bitmap to take a screenshot of the current view of a control, then using that bitmap to create a JPEG file and appending that file to the report. However, the graphs and images are very fuzzy and pixelated. Is there another way of adding a graph or image to the report?

The nirconvertsample.cws example seems to have images in the table for NIReport. You can dig through that example code to see how they do it.
Mark P.
Applications Engineer
National Instruments
www.ni.com/support

How to insert a conditional image into a report

Hi
I am fairly new to HTML DB, but I have managed to create my first application.
I need a little help with one report.
One of the columns in the report contains Y, N or R. The customer wants me to display a different coloured image depending on the value (ie a red button for N, green for Y or amber for R).
I have can add a static image to a report via "Column Formatting" -> "HTML Expression", but I have no idea how to make it conditional.
Any ideas?
Many thanks in advance.
Rak

Great, that works!!!!
Thanks very much.
For completeness (incase anyone else reads this), there was one typo, in your solution, you omitted the opening '<' in the image source HTML tag
select loanno, itemid,
decode (returned, 'N', '<img src="#IMAGE_PREFIX#bullet_red.gif" border="0" alt="Loaned">',
'Y', '<img src="#IMAGE_PREFIX#bullet_green.gif" border="0" alt="In Library">',
'R', '<img src="#IMAGE_PREFIX#bullet_orange.gif" border="0" alt="Returned">'
) as status
from loans
Thanks for your help,...
Rak

How to insert a dynamic image in a report

Hi,
I want to insert the image of a student in a report toghether with all other student's data. The image's file name is in a field of the students' table and the file is stored in a directory of the web application. I am using Visual studio 2010 and the reports are prepared with Crystal Reports 2008 (full product). At design time, when I try to insert an image on the report, it immediately asks for an image file on the computer, so I cant figure out how to insert an image whose path and file name come from a data source.
Thank you

Hi Don,
As I said, when I insert any field in the report, say for instance the Student ID, and then link it to a database field containing the name of the image file to display (I have to concatenate the path to this file name as well), it first shows the report with the Student ID. If I click on it, because of the hyperlink defined at design time, it opens the file (an image in this case) in Internet Explorer, not on the report.
The same happens if I put an image as an object on the report at design time. In this case as soon as I put the image object on the report it forces me to select an initial image to show on the report. Anyway, I define an hyperlink for this image, pointing it to the image file of the Student, using the database field containing the image file name. When I show the report I see the initial image I was forced to use and when I click it, the hyperlink takes me to the right student image, but even in this case it shows me the right image opening an Internet Explorer session and not on the report. On the report the initial image is still there and never changes.
What I actually need is a way to put the student's image on the report as soon as it shows the other student's data, as the name, age, ***, and so on, without having to click somewhere to show the student's image.
Thanks

Problem sending Tab/Cluster control image to Word report.

I've set up an option for the user to send a control image to a Word report where they can decide to Print and/or save from Word (I've found the normal Print option too slow with the printer available). The Word document opens fine but I am loosing data from my indicators, without which there's not much point in printing!!
Is there a problem with Clusters, I have a chart and table on another page of the Tab in my main program and they come out fine.
I'm using LV8 with the Report toolkit and Word 2000
Thanks
Ian
Attachments:
Send to Word.vi ‏34 KB
Send to Wordp.png ‏22 KB

This problem has been reported in previous posts on the LabVIEW forums. LabVIEW R&D is aware of the problem, and it should be fixed in a future LabVIEW version. For now, the only workaround I know of is to make extra space in your clusters so the controls are visible in the report. I know it's ugly, but it's the only thing I know that works (other than reverting back to LabVIEW 7.1).
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How could I display an image a day/week?

Hi guys, I'm a cartoonist and mid level webdesigner. I'm trying to put together an app version of a folio/comics website. I wanted to know what my options are for putting in a new featured image per day/week. And what are my best options for delivering this type of content. Forcing them to update the latest version of the image isn't going to work very well.
The three options as I see it, and might not be the best ones, are:
1. Single edition app, html points at website to show updated index page with image.
2. Multi edition app, push notification when download of new image is available.
3. Embed all the images into a single edition version of the app, but only allow the user to see the latest image on specific calendar dates.
What are my other options and how would I implement them for iOS?
The only other feature I wanted was to be able to point or link people back to my webstore if they wanted to purchase prints of the image they are viewing.
I would really appreciate all the help I can get.

Option #1 is the way to go, and the way customers do this in DPS. A good example is National Geographic that does rich, updating, pages with photos in their monthly issues using the web overlay to point to HTML somewhere. It's the easiest way to do it.
If you intend to submit this to Apple, a word of warning: if all your Single Edition app does is host a web control that renders your web page they are likely going to reject the app. You have to have real, rich, interactivity in the application and lots of content to navigate through as part of the app.
Neil

How could I plot 2D images or arrays serie to 3D object in LabVIEW?

Hello, everybody.
I would like to ask you guys about plotting 2D images or arrays series into a 3D graph or object or any possible.
If I have serie of 2D arrays (It's 3D). For example, the 3D array contains 500 (z) x [ 500 x 500 (x and y)].
Could anyone tell me the possible way to do this problem?
Thank you very much .....
Racha

Hi rachacha
I have been investigating about your question and I realized that we have a document with one example that it use different 2D picture for building a 3D object. I belief it will be useful for you.
->> https://decibel.ni.com/content/docs/DOC-4765

How could I copy an image under labview and to stick it right A side of old

copying shapes and stick them x times after knowing that one will differemment modify the color of each shape, I have Imaq Vision Builder

I'm not sure I understand what you are trying to achieve. Will you please clarify the question? Also, what version of LabVIEW and Vision Builder are you using?

How to show a compressed image in the report?

Hi
I have created a new report.what i do in application is i compress the image and save it in database.now i need to retrieve the compressed image and display in the report. I have used the following code to decompress the binary data save in the image.I
dont know after that what should i do. Please help me to show the picture in SSRS Report. I need to show picture in many reports.one of my doubt is how to call this function in SSRS Report. The function accepts input as byte but in database the column in varbinary.
should i convert the input type of function to varbinary instead of byte array? Please help me.
Public Function Decompress(ByVal arr As Byte()) As Byte()
Dim notCompressed As Boolean
notCompressed = False
Dim MS As MemoryStream
MS = New MemoryStream()
MS.Write(arr, 0, arr.Length)
MS.Position = 0
Dim stream As GZipStream
stream = New GZipStream(MS, CompressionMode.Decompress)
Dim temp As MemoryStream
temp = New MemoryStream()
Dim buffer As Byte() = New Byte(4096) {}
While (True)
Try
Dim read As Integer
read = stream.Read(buffer, 0, buffer.Length)
If (read <= 0) Then
Exit While
Else
temp.Write(buffer, 0, buffer.Length)
End If
Catch ex As Exception
notCompressed = True
Exit While
End Try
End While
If (notCompressed = True) Then
stream.Close()
Return temp.ToArray()
Else
Return temp.ToArray()
End If
End Function
Thanks & Regards Manoj

Please try this
Public Function Decompress(ByVal arr As Byte()) As Byte()
Dim s As Byte()
Dim notCompressed As Boolean
notCompressed = False
Dim MS As System.IO.MemoryStream
MS = New System.IO.MemoryStream()
MS.Write(arr, 0, arr.Length)
MS.Position = 0
Dim stream As System.IO.Compression.GZipStream
stream = New System.IO.Compression.GZipStream(MS, System.IO.Compression.CompressionMode.Decompress)
Dim temp As System.IO.MemoryStream
temp = New System.IO.MemoryStream()
Dim buffer As Byte() = New Byte(4096) {}
While (True)
Try
Dim read As Integer
read = stream.Read(buffer, 0, buffer.Length)
If (read <= 0) Then
Exit While
Else
temp.Write(buffer, 0, buffer.Length)
End If
Catch ex As Exception
notCompressed = True
Exit While
End Try
End While
If (notCompressed = True) Then
stream.Close()
Return temp.ToArray()
Else
Return temp.ToArray()
End If
End Function
Thanks & Regards Manoj

Images in a report

How can I import an image in a report and see it in a RTF
generated file? If I follow the help of the Report Builder 6i,
and after resizing the image, there are always problems in
MSWord - either the image has another size, or it is in some
other place of the report. If I generate the same report into a
PDF it is running well...
Thanks.

Hi,
Please refer this link.
I guess you have to place image into two location. Please refer the location path the below link then try to use same syntax
http://satyaobieesolutions.blogspot.in/2012/08/fmap-in-obiee-10g-obiee-11g-using-fmap.html
Thanks,
satya
Edited by: Satya Ranki Reddy on Sep 3, 2012 4:48 PM
Edited by: Satya Ranki Reddy on Sep 3, 2012 4:50 PM

Control break in sql report

hello all
how to have a control break in sql report?
Thanks
tauceef

do you want the users to select the column you wish to have the control break? if not you can use the BREAK ON command along with the order by in your select statement
regards,

I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

That depends on why it won't open. Most of the time it means the file is corrupted and unlikely to be recovered. If you saved it right after adding or copying a LOT of layers - then it might just be the layer limit and we can attempt to recover it.

I have my photos iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

I have my photos in iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

When what is clicked?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

How could control the scroll events in ALV OO?

Hello experts!
I'm programing a report, inside there is a field that need time of processing. I'm using ALV OO.
I have thought that it could only calculate the field for the lines that visualize.
How could control the scroll events to calculate the field of the visualized lines?
I'm using CL_SALV_TABLE class and cl_salv_events_table to control the events, but there aren't any event to control the scroll.
best regards!

Hi Sriram,
I did view the information that you was attaching, but this don't resolve my problem. With methods get_scroll_info_via_id and set_scroll_info_via_id, we can get and put information of selection and view rows in the screen but we don't control when the user click in the scroll for advance or to back down a page.
I would like to refresh the data in ALV when the user view news rows.
I want your genial ideas.
Best regards!

How do I open RAW images from DSC_RX100M3? I downloaded Adobe DNG converter 8.4, but could not convert the images?

How do I open RAW images from DSC_RX100M3? I downloaded Adobe DNG converter 8.4, but could not convert the images?

Small correction to what SSprengel wrote...
The RX100M3 is supported only by version 8.5. It sounds like you need a newer version.
Photoshop Help | Digital Negative (DNG)
-Noel

How could I arrange control images in a report?

Similar Messages

Maybe you are looking for