Append quote to a number.

Hi Experts!,
Please tell me what is the syntax to append a quote i.e. '
What I remember was something like below. But it is giving error. so may be wrong syntax.
data: number type num6.
concatenate '\'' number '\'' into number.
example-
number = 123.
I need to append ' before and after 123 . finally output should be '123'.
Please help

if you look at NUM6 data type is Character string with only digits so it will not allow you to prefix and sufix \ or ' you need to move to Character data type of string data type..
REPORT ZJ_TEST.
data: num type num6 value '123',
number type num8 ,
string type string.
CONCATENATE '''' num '''' into string.
write string to number.
WRITE:'Your Number:', number.

Similar Messages

How to append calling and called number with translation rules?

Hello,
I have one question about digit manipulations.
How to append calling number and called number with IOS commands?
For example, when 123 dials 45678, translations have to be performed and the new called number to be 12345678.
Thank you,
I will vote this conversation.

It is not possible with translation rules.
However, you can do that with a TCL/IVR script.

How to append 0 to any number to make it of specific length

Hi,
I have a requiement. There is a textfield it is of max length 3, if user enters any number like '1' or '5' then it should be automatically appended with '0' to make it of length 3 that is if user enter '3' then it should become '003'.
Please helpme in implementing this.
Thanks,
Vikram

Thanks for ur reply..
Ya we can use that infact right now I am using lpad only but is there any formatter class which we can set in our bean so that it will automatically format it in desired way.
Thanks,
Vikram Singh

Find production order using quote and/or sales order number

How can I find the related production order if I only have the quote/sales order number and line item? I know that I can go through AFPO and/or AFKO but is there another way?
Regards,
Davis

In the Table AFPO, the Field KDAUF contains the Sales Document Number and KDPOS the Line Item Number. If you are looking for a Transaction to Enter the Sales Document Number at, use TCode CO26.

Sharepoint 2010 appended port number in the public URL when redirect

I'm new in sharepoint so please bear with me.
We have a sharepoint deployment that has 4 WFEs, each WFE has 4 sites, all on a different port number. For example;
Site 1: http://site1.server1:11111
Site 2: http://site1.server1:22222
Site 3: http://site1.server1:33333
Site 4: http://site1.server1:44444
We have a load balancer that use a public URL to all these sites. For example;
Site 1: http://site1
Site 2: http://site2
Site 3: http://site3
Site 4: http://site4
Here is the problem. Some of the link in the sharepoint site, when click, the URL is appended with the port number at the end of the public URL. For example, http://site1:11111.
I tried playing around with the AAM but it doesnt yield anything. Any advise from the expert would be appreciated.

Hi,
Look at your default AAM. This controls how the URL is appended or not. You also need to look at the site bindings in IIS and make sure you have them for each site, for port 80. And you need an alternate access mapping that routes site.server:Port
to site if your desired outcome is to have any load balanced call route back to the default alternate access mapping of http://site1
you would have a binding on http://site1 on port 80 in iis, and a host header associated with this site.
Also, if you are using path based sites, this will only work for one site. You can tell if you're using path based site collections if you see a / in front of their names inside view all site collections.
Microsoft recommends using Host named site collections, check out this technet
http://technet.microsoft.com/en-us/library/cc424952(v=office.15).aspx
Stacy www.sharepointpapa.com

Quota generation issue while running time evaluation

Dear Experts,
we are using positive time management ,generally we will generate quota based on number of working days of the employee ,so for counting working days we will add day off and public holidays also ,now quota is generating fine ,but if the employees applies leave in between week off ,then quota is using for the week off also but that day is adding to the working days so quota is generating for that day as well ,please give me some inputs how to exclude that day .it is very urgent,please help me experts .
if employee taken leave from 1st to 15th
calender days -15 days
absence days - 13 days
Quota Used -15 days
in this case the absence days should be 15 days

When you mention Absence Days as 13, this is what you see in 2001 screen. You cannot change this as SAP calculates the absence days as those which are working days.
When it comes to your PCR where you are counting WOFF and PH to generate quota you will need to query the absence type and include/exclude the leave types based on your business logic. If you can share the PCR which is used for generating quota, maybe it will give us a clue.
Regards
Pramod

Finding the Serial Number for AppleCare Protection Plan

I am trying to register my Laptop to the Protection Plan, but I can`t find the serial number. When I do, do I type everything? I thought I found it, but they say its not valid. Can someone please give me an example to me? Thank you very much!!

It is unlikely that the Serial appearing in System Preferences is wrong. Could I suggest you make absolutely certain that you are quoting it correctly.
Could I also suggest that you make the registration and buy the Apple Care by phone. You may have to actually transmit the money other than by quoting a card number. In any case you have a human to keep you right on the serial. The first step is to make sure that the serial is correct.
You can print out Sys Prefs. However it is a big file especially the section on the Applications and Extensions. I would suggest you display the first section with the serial> select the text>copy text to clipboard> paste into a fresh Text Edit document. You can then print that out to post to Apple if need be, send it by email or whatever.

Scheduling Agreement and Quota arrangement

Dear all,
Kindly share with me the individual steps involved in in creating Scheduling Agreement as well as Quota arrangement procurement process with T.Codes and also the relevant configurations involved.
Thanks a lot.

Hi,
Here is all about Quota arrangement :
Following are the configurations.
1) To specify number range for quota arrangement
SPRO > IMG > MM > Purchasing> Quota arrangement> Define number range (Int or Ext)
2) Set Quota arrangement usage indicator:
SPRO > IMG > MM > Purchasing> Quota arrangement> Define quota arrangement usage
On Application side following are the prerequisites
1) Create Quota arrangement
SAP Menu> Logistic> MM > Purchasing> Master Data> Quota arrangement > Maintain
2)specify procurement type : Int / Ext
3)Where appropriate specify the special procurement type For ex stock transfer
4) Enter the vendor or supplying plant
5) Specify the quota you want to assign to this source
Please understand terms as below,
Quota Rating = Quota allocated Qty +Quota Base Qty /Quota
Quota Base Qty: Quantity used for manual control of the quota Arrangement (For example new source is included)
Quota: Number that determines how requirement are apportioned among various sources .Decided by a Purchasing people based on confidence on source.
I source determination source with lowest quota arrangement will always be assigned
Example
Source Quota    allocated Qty      Quota Rating
M             1                   100                     100
N              2                   150                     75
O             3                     75                      25 *
In above case vendor O will be assigned as low Rating *
Now quota Base Qty will come into picture when new supplier is introduced. As you have seen that vendor with low quota Rating is assigned .In case of new supplier as no allocated qty earlier its Quota rating will always be low & all Qty will be allocated to him. To prevent this Base qty is added to allocated Qty so that accordingly it will determined accordingly
If Quota base Qty is 100   & quota is 2
For new vendor X rating will be
Quota rating = 100 + 0 / 2 = 50
I hope this gives you entire clarity.
Vivek

TS4002 I get quota reached when trying to send mail

How do I cure quota reached message on my iPhone 5?

Could it be one of the following...
1. your max number of mb 3g usage with your carrier is reached
2. your max mb of storage in icloud is reached
There is also a quota on the number of emails you can send in one day. Have you been mass mailing emails?

Port Number visible in Siebel URL

Hi all,
We have just finished deploying our Siebel Application in Production. It is a standard multi-server environment with Clustering and Load Balancing.
However, we see that Siebel is automatically appending the Network Port Number (:8000), when accessing from an external Web Server.
The client has requested this port number (:8000) be removed from the URL. We would really appreciate some help on the issue.

You may have 2 constraints that are difficult to mix:
1/ Any Browser consider an URL starting with http://server/path is to be send to port 80 of the "server"
That is why all Web server (IIS, Apache, etc) use to be reached using port 80 by default.
2/ Local security constraints
One of those security guy may have told you that they can not accept to open the firewall or reverse-proxy to the port 80 of your virtual IP representing the web server farm
Conclusion: Please have a discussion with your local security team and see if this has already been discussed.

Changing plain text date number to the actual month

Building an analysis using OBIEE version 11.1.1.6.8.
We have a date table named "History-Period"."Fiscal Month" and it uses 1,2,3,4,5,6,7,8,9,10,11,12 as months. 1 should be October, 2 should be November...12 should be September. I've tried a simple CASE WHEN "History-Period"."Fiscal Month" = 1 THEN 'October' but it does not work.
I believe the numbers are in a plain text format. Do I need to cast this as a different data type?
PS: There is also an actual "History-Period"."Month" table I could use where it provides the actual month, but it does not place them in fiscal year order (or any logical order to be honest).
Thanks in advance!

Hallo,
If your data in History-Period is of type text, then try adding single quotes round the number in your case statement. For example:
CASE WHEN "History-Period"."Fiscal Month" = '1' THEN 'October'
Or perhaps you could add a column to the History.Month table to give the order?
Regards,
Ian Bristow

Rename Computer with Predefine word with user prompt and PC serial number

I would like help from the community to create a script to rename a computer for sysprep the following format example is below. The script to needs to have a predefined characters at the beginning followed by a prompt to user to add 1 character and the final
step would be to append the PC serial number please see example.
Computer Name: ABC?%SERIALNUMBER%
The (ABC) would be predefined at the beginning
The ? would be a prompt for the user to enter the letter L or D (This is to determine Laptop or Desktop)
The final is to add computer serial number.

Hi,
After checking your issue, I suggest you post your issue in Script Center forum for further assistance.
Script Center
http://social.technet.microsoft.com/Forums/en-US/category/scripting
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Setting up number range for projects in cProjects

Hi,
I am new to cProjects & my apologies if my question may sound very naive. My client wants an alpha-numeric number range to be set up for numbering of projects. Is this possible & if yes how? Which is the object for setting the number range? (I believe the transaction in "SNRO")
Thanking you for taking a note of my querry.
Regards
Deepak

Sample Code Method SET_DEFAULTS_UPON_CREATION
Method IF_EX_DPR_ATTRIBUTES~SET_DEFAULTS_UPON_CREATION
*/ This method is called when creating a new project element (i.e. project definition,
*/ phase, task, etc) and can be used to fill in default values for standard as well
*/ as customer defined data fields.
*/ This implementation is provided to assign customer specific numbers to project
*/ elements.
*/ It's interesting to note that when this method is called, the external ID of the
*/ object has already been determined and assigned by the default numbering services
*/ class CL_DPR_NUMBERING_SERVICES. It is also interesting to note that if a user
*/ specified an ID for the object through the user interface, changing the identifier
*/ in this method will have no effect -- meaning the user specified ID will still be
*/ assigned to the object.
*/ Only the example for Project Definition is provided. For other project elements,
*/ insert similar code between the Beginning and End comments below. In addition,
*/ the filter for this BADI implementation must be updated to include any other
*/ project element for which custom number assignment is desired.
DATA:
    lr_parent              TYPE REF TO if_dpr_common,
    lr_project             TYPE REF TO cl_dpr_project,
    lr_approval            TYPE REF TO cl_dpr_approval,
    lr_individual_approval TYPE REF TO cl_dpr_individual_approval,
    lr_phase               TYPE REF TO cl_dpr_phase,
    lr_task                TYPE REF TO cl_dpr_task,
    lr_checklist           TYPE REF TO cl_dpr_checklist,
    lr_checklist_item      TYPE REF TO cl_dpr_checklist_item,
    LV_NUMBER              TYPE DPR_TV_EXTID,
    LV_NUMTEXT             TYPE CGPL_EXTID,
    LV_INTERVAL            TYPE NRIV.
FIELD-SYMBOLS:
    <ls_project_attrs>             TYPE dpr_ts_project_int,
    <ls_phase_attrs>               TYPE dpr_ts_phase_int,
    <ls_task_attrs>                TYPE dpr_ts_task_int,
    <ls_checklist_attrs>           TYPE dpr_ts_checklist_int,
    <ls_checklist_item_attrs>      TYPE dpr_ts_checklist_item_int,
    <ls_approval_attrs>            TYPE dpr_ts_approval_int,
    <ls_individual_approval_attrs> TYPE dpr_ts_individual_approval_int.
*/ Determine which project element (object category) is being processed
CASE flt_val.
    WHEN cl_dpr_co=>sc_ot_project.
      ASSIGN cs_attributes TO <ls_project_attrs>.
      lr_project ?= ir_common.
*/ Beginning of custom project number assignment.
*/    In this example, the default system numbering is manipulated to
*/    produce the Project Number...
*/    Get info regarding the number range for operative projects...
      CALL FUNCTION 'NUMBER_GET_INFO'
        EXPORTING
          NR_RANGE_NR              = 'DO'
          OBJECT                   = 'DPR_EXTID'
*         SUBOBJECT                = ' '
*         TOYEAR                   = '0000'
        IMPORTING
          INTERVAL                 = LV_INTERVAL
        EXCEPTIONS
          INTERVAL_NOT_FOUND       = 1
          OBJECT_NOT_FOUND         = 2
          OTHERS                   = 3.
      IF NOT SY-SUBRC IS INITIAL.
        RAISE EXCEPTION TYPE CX_DPR_FATAL_ERROR
          EXPORTING
            TEXTID = CX_DPR_FATAL_ERROR=>SC_INVALID_PARAMETERS.
      ENDIF.
*/    Strip off the year that has been appended to the object number
*/    by the default numbering services...
      write <ls_project_attrs>-project_id(20) to lv_number.
*/    Get the incremental number of the project from the number range...
      lv_number = lv_number - LV_INTERVAL-FROMNUMBER.
*/    Format the number according to customer specific requirements:
*/    In this example the number is PROJ-<inc num> where <inc num>
*/    is the incremental number of the project (i.e. for the 33rd project
*/    created, the <inc num> is 33).
      WRITE lv_number to lv_numtext no-zero.
      condense lv_numtext.
      CONCATENATE 'PROJ' lv_numtext INTO lv_numtext SEPARATED BY '-'.
      TRY.
          CALL METHOD LR_PROJECT->SET_PROJECT_ID
            EXPORTING
              IV_PROJECT_ID              = lv_numtext.
      CATCH CX_DPR_OBJECT_UPDATE_ERROR .
          RETURN.
      ENDTRY.
*/ End of custom project number assignment.
    WHEN cl_dpr_co=>sc_ot_phase.
      ASSIGN cs_attributes TO <ls_phase_attrs>.
      lr_phase ?= ir_common.
*/ Beginning of custom phase number assignment.
*/ End of custom phase number assignment.
    WHEN cl_dpr_co=>sc_ot_approval.
      ASSIGN cs_attributes TO <ls_approval_attrs>.
      lr_approval ?= ir_common.
*/ Beginning of custom approval number assignment.
*/ End of custom approval number assignment.
    WHEN cl_dpr_co=>sc_ot_individual_approval.
      ASSIGN cs_attributes TO <ls_individual_approval_attrs>.
      lr_individual_approval ?= ir_common.
*/ Beginning of custom individual approval number assignment.
*/ End of custom individual approval number assignment.
    WHEN cl_dpr_co=>sc_ot_checklist.
      ASSIGN cs_attributes TO <ls_checklist_attrs>.
      lr_checklist ?= ir_common.
*/ Beginning of custom checklist number assignment.
*/ End of custom checklist number assignment.
    WHEN cl_dpr_co=>sc_ot_checklist_item.
      ASSIGN cs_attributes TO <ls_checklist_item_attrs>.
      lr_checklist_item ?= ir_common.
*/ Beginning of custom checklist item number assignment.
*/ End of custom checklist item number assignment.
    WHEN cl_dpr_co=>sc_ot_task.
      ASSIGN cs_attributes TO <ls_task_attrs>.
      lr_task ?= ir_common.
*/ Beginning of custom task number assignment.
*/ End of custom task number assignment.
ENDCASE.
ENDMETHOD.

How to locate your Vaio Model Number

In order to get the best support you can from fellow users of the forum it's important to always quote the model number when you have a question.
The method for locating your model number depends on when the product was released. On very old models (released before Summer 2000) the computer information and compliance label (located on the bottom of the notebook case or the back of the desktop case) indicates the actual model / product name. For all more recent Vaios (models released Fall 2000 and later) the model name can be found on a small label located in one of the following places:
Notebook Computers:
* On the bezel (frame) of the LCD display.
* On the LCD hinge.
* At the top left or top right of the keyboard.
Desktop Computers:
* On the front of the computer
* On the bezel (frame) of the LCD display for all-in-ones.
Solved!
Go to Solution.

We're just posting this as a reminder as we've been getting a lot of posts with no model number quoted recently. Also, many users have been quoting the chassis part number instead of the model number - if your notebook computer is a more recent model year than 2005 the model number will not begin with PCG - it will begin with VGN or VPC.

Any quota for mails in Mail?

Is there any quota for the number of sending mails in Mail?

Quotas, if applicable, are set by the service provider, not the application. iCloud, for example, has clearly stated limits:
iCloud: Mailbox size and message sending limits - Apple Support
You would have to ask any other mail services you use whether they impose quotas.

Append quote to a number.

Similar Messages

Maybe you are looking for