Append rows to existing xls file

Hello Friends,
I have a problem with gui_download. I am working on ECC6.0.
I need to append some rows to existing xls file. I am using gui_download but it not working properly.
I am giving append = 'X' also it is not appending rows it is overwriting the existing rows.
Please help in the regard.
Thanks in advance.
Krishna Yerram.

Hi,
BOOK2 is laready existed excel file
Please make sure that X is captail
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = C:\BOOK2.XLS
   FILETYPE                        = 'ASC'
   APPEND                          = 'X'
tables
    data_tab                        = data_tab
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
jana

Similar Messages

Adding row into existing CSV file using C#

How to add row to existing CSV file using .NET Code.the file should not be overwrite,it need add another row with data.how to implement this scenario.

Hi BizQ,
If you only just write some data to CSV file. Please follow A.Zaied and Magnus 's reply. In general,we use CSV file to import or export some data. Like following thread and a good article in codeproject
Convert a CSV file to Excel using C#
Writing a DataTable to a CSV file
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can we append data in existing flat file

how can we append data to a existing flat file (Text file).

just fill the itab from data which suppose to append to text file.than read text file from GUI_UPLOAD and loop on itab and with the use of read statements you may append the data.

Would like emails from a particular sender to automatically get exported to a text file or appended to an existing text file on my hard drive

Emails from a particular sender I would like to get appended to a single or to multiple csv or text files.
I think I've read that Mozilla can use filters to get all emails from a particular sender put in a particular folder.
That might be useful but does not get me all the way to goal.
I've also read about 3rd party plugins that give you export options through additional menu options
However, I need something that just automatically exports (without me having to be there and does not require any mouse commands) whenever an email from a particular sender shows up. And that exports to a csv or txt file.
thanks for any time you spend on this question.
Chris

ok I answered my own question on this one.
According to Filtaquilla online documentation:
''(Beginning in Filtaquilla version 1.3.0): By default, the message is saved with the default Thunderbird extension .eml The filter will use a different extension if you append to the file spec a | followed by the extension. So for example if the filespec is C:\temp\saveas\ for the default extension type, change this to C:\temp\saveas\|txt and the extension will be “txt”.''
I was able to verify this works in my test.

Create XLS file of 12 lakhs rows stored into oracle database.

Respected All,
   My requirement is :
Into my database , in one of my table has 12 lakhs rows. Now I want to create a PLSQL procedure which can convert all those rows into Microsoft .XLS file.
So I tried out with Procedure below : -
CREATE OR REPLACE PROCEDURE SCOTT.EMPLOYEE_REPORT(
DIR IN VARCHAR2, FILENAME IN VARCHAR2) IS
F UTL_FILE.FILE_TYPE;
    CURSOR AVG_CSR IS
    SELECT ENAME, DEPTNO, SAL
    FROM EMP;
BEGIN
F := UTL_FILE.FOPEN(DIR, FILENAME,'W');
UTL_FILE.PUT_LINE(F, 'REPORT GENERATED ON ' ||SYSDATE);
UTL_FILE.NEW_LINE(F);
FOR EMP IN AVG_CSR
LOOP
UTL_FILE.PUT_LINE(F,
RPAD(EMP.ENAME, 30) || ' ' ||
LPAD(NVL(TO_CHAR(EMP.DEPTNO,'9999'),'-'), 5) || ' ' ||
LPAD(TO_CHAR(EMP.SAL, '$99,999.00'), 12));
END LOOP;
UTL_FILE.NEW_LINE(F);
UTL_FILE.PUT_LINE(F, '*** END OF REPORT ***');
UTL_FILE.FCLOSE(F);
END EMPLOYEE_REPORT;
COMMAND TO EXECUTE THE PROCEDURE IS : - >
EXEC EMPLOYEE_REPORT('UTL_FILE','TEST.XLS')
   in this package , I used scott user table for the r & d.
While I execute this package , I got the error :
ORA-29280: invalid directory path
ORA-06512: at "SYS.UTL_FILE", line 18
ORA-06512: at "SYS.UTL_FILE", line 424
ORA-06512: at "SCOTT.EMPLOYEE_REPORT", line 8
ORA-06512: at line 1
   KINDLY HELP ME TO SOLVE THIS PROBLEM
THANKS/ REGARDS
HARSH SHAH
URMIN GROUP OF COMPANIES

Hi,
first of all try to use international measures. Any time I see lakh I have to google to find what it is.
So you are trying to put in an Excel file 1.200.000 records (more than 1 million).
Actually even if you would produce such file Excel will not be able to load it.
Even in the latest version of Excel (2013) the maximum number of rows per sheet are 1,048,576 (source: Excel specifications and limits - Excel - Office.com).
So if you will try to load in Excel such a big file you will get an error.
And, as Blue has said, you are not producing an Excel file with your statement.
Regards.
Al

What is the best, most efficient way to read a .xls File and create a pipe-delimited .csv File?

What is the best and most efficient way to read a .xls File and create a pipe-delimited .csv File?
Thanks in advance for your review and am hopeful for a reply.
ITBobbyP85

You should have no trouble doing this in SSIS. Simply add a data flow with connection managers to an existing .xls file (excel connection manager) and a new .csv file (flat file). Add a source to the xls and destination to the csv, and set the destination
csv parameter "delay validation" to true. Use an expression to define the name of the new .csv file.
In the flat file connection manager, set the column delimiter to the pipe character.

Report Generation tool kit for MS office (Opening an existing excel file and appending to the bottom)

I don't have any problems creating and filling an excel sheet with data. I use the New Report.vi, Easy Title.vi, and Easy Text.vi to create the file. I then save and dispose properly.
What I don't seem to be able to do is open the exsting file and append data to the end of the sheet.
Thanks in advance for your help.
todd

Hi Todd,
You can do this by creating a new Excel report with the existing excel file path wired to the "template" input. Then use "Excel Get Last Row.vi" (located under Report Generation\Excel Specific\Excel General) to obtain the location of the last row. Then use that location to input new data into the file.
Hope this helps,
Dan

Is there an easy way to append a new column of data to an existing xl file?

I am modifying and existing program and the new needs are to have a compilation of averaging information to later be plotted with an xl graph. The VI will need to open the existing xl file, add the new column of data points without disturbing the existing columns of data, with a column header, and save the new file with the existing file name. The open and save are obviously not a problem, but I have never appended a new column, just rows in the past. The existing program is LV5.1, but i have a professional developement version of LV6i at my disposal if I need to convert it. Thank you in advance for any suggestions.
Tim Fleeger
Siemems Medical Systems

TMF:
INdeed there is. YOu want to use the "write characters to file" node. (If you're using numerical data, you might have to convert with one of the STRING conversion functions) YOu want to concatenate the string as follows: TAB/DATA/CARRIAGE RETURN. Also be sure to wire TRUE to the Append File terminal of the WRite Characters to File node.. Good luck!
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

How to Append an existing Excel file?

I am using the jexcel api to write to a new excel file. Each time i run my program, it creates a new Excel File by the name i give it. my code to create the excelFile is as below:-
File excelFile=new File(workDir+"\\"+fileName+".xls");
WritableWorkbook workbook = Workbook.createWorkbook(excelFile);
After this code i write some data to a worksheet in the above mentioned excel file. But my requirement is that I want to create the excel if it does not exist, and if it exists, then the data should be appended to the worksheet in the existing excel file. At present it creates a new excel file and does not append it.
How can it be done? does anyone have any suggestions as to how can i tackle this problem? please suggest something.
Ankit

There is no ready-to-run example, as you are searching for, available.
This has several reasons:
- It depends on the version of Excel. Examples for Excel 2007 might not work with Excel 2010 for instance.
- No one just wants to open Excel without doing anything with it.
The second point is something, i want to ask you:
Why do you want to open an existing Excel file at all? What is it, what you want to do after opening it?
If you have LV/C/C#/VB examples doing what you are looking for, why do you want to have it in TestStand directly, so NOT using existing code (saving time and effort) and basically re-inventing the wheel?
ActiveX is an interface for remote controlling and embedding applications with/in other applications on Windows systems. It is a PROGRAMMING interface.
So naturally, examples and tutorials exist for programming languages. Those examples are easily converted to TestStand sequences with a basic knowledge of the programming language and TestStand. Providing links for such tutorials/examples is a valid way to give support to fellow developers because we expect the fellow to have that basic knowledge.
If that knowledge is not present, i highly recommend to fill that gap.
just my 2 cents,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Adding rows to an existing Excel File.

Hey,
I need to be able to add rows to an existing Excel File. I just wanted to know what are my options here.. any sample VIs already existing?
any help is appreciated.
Regars,
Pete

Yes, the Report Generation Toolkit works very well for this (active x underlies). You can use the Write to Spreadsheet File.VI to append data to an Excel file. But keep in mind this file is text-based and not a true Excel file. That doesn't mean much unless you want manipulate the file with Active X, in which case you will have problems (such as col width, for instance). If you have Report Generation Toolkit, use it. It's very easy and flexible.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

Extra Rows in the Crystal Report while generating XLS files

I was tring to gerate a xls file in crystal reports which has four sub-reports but while getting the output it gives a blank row for every 51 rows or so one of the subreport which has bult data. Let me know if any one can help me out in this consern.

What about answers to questions 2 and 3?
2) What CR Service Pack are you on?
4) Assuming you are using a stand-alone version of CR, how's the export from the CR designer?
It may be that continuing this thread is not worth while if I can not get the basic info(?). Creating a phone case may be an option for you:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

Can Acrobat Standard append to an existing file when saving? Can Pro?

Hello all,
I'm wondering if Adobe Acrobat Standard has the function to save to an existing file. I don't mean append two PDF's together after they are already created. I mean I already have a PDF document which I need to add lots of additional pages to. So when creating additional PDF's, I want to be able to tell Acrobat to add those files to the end of the document I already have.
PrimoPDF has this feature which would be a real time-saver in my line of business. In that program, you simply choose the same filename when asked to save the document. It then prompts you to overwrite or append-to the existing file. For business reasons, it would be very advantageous to use Acrobat rather than Primo. Does anyone know if Acrobat Standard can do this? If not, does Pro do it? Thanks for your time. I appreciate any feedback I get.
Chris

Never tried that... you might read in the Acrobat Pro User Guide Online
http://www.adobe.com/support/documentation/en/acrobatpro/

Import CSV data to an existing populated XLS file

Hi Guys,
Looking for some assistance, with some powershell I have never done before.. and don't know where to start..
I have a CSV file that contains some data - Several items exported from a standard powershell command.
I also have an XLS file that has been manually populated for the last 6 months with data.
What I want to get to (and have started with exporting the data to csv) is for the script to run, and add the data from the CSV to the XLS in the already exisiting colum heading.
SO in the first row - we need to add the date, followed by adding data under each subsequent column that already has a heading..
Anyone got any suggestions on where to start with this? Any advice greatly appreciated.
Thanks
Allan Harding

I think your question is a bit too broad and vague.
If you are not a scripter then I recommend asking in the Exxcel forum. THey will help you learn how to use Excel tomerge data tables.
If you want to scrpt this then youneed to start by learning how to write a script. YOu will want to use Import-Csv and the Excel object model.
If this is critical then I recommend contacting a consultant.
http://technet.microsoft.com/en-us/scriptcenter/dd742419.aspx
¯\_(ツ)_/¯

How I can append new node in existing XML file

I've just begun learning DOM XML , so I'm currently at a very beginner level.
I have an existing XML file that I would like to add an additional node to before saving it to another variable.
how I can append new node in this file.
now this code is overwrite new data over old data
The code looks like this:
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.TransformerFactoryConfigurationError;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Attr;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
public class VerbXMLWriter
    static String EVerb3;
    static String englishTranslate3;
    public void VerbXMLWriter(String EVerb, String englishTranslate )
         EVerb3 = EVerb;
         englishTranslate3=englishTranslate;
    File xmlFile = new File("VerbDB.xml");
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    try
     DocumentBuilder builder = factory.newDocumentBuilder();
     Document document = builder.newDocument();
    Element root = document.createElement("Verb");
     document.appendChild(root);
     Element verb = document.createElement(EVerb3);
     verb.setAttribute("EnglishTranslate",englishTranslate3);
     root.appendChild(verb);
     Source xmlSource = new DOMSource( document );
     Result result = new StreamResult( new FileOutputStream(xmlFile) );
    TransformerFactory transformerFactory = TransformerFactory.newInstance();
    Transformer transformer =
    transformerFactory.newTransformer();
    transformer.setOutputProperty( "indent", "yes" );
     transformer.transform( xmlSource, result );
catch(TransformerFactoryConfigurationError factoryError )
    factoryError.printStackTrace();
   catch (ParserConfigurationException pc)
       pc.printStackTrace();
   catch (IOException io)
      io.printStackTrace();
   catch(Exception excep )
       excep.printStackTrace();
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Verb>
<Play EnglishTranslate="playing" />
</Verb>Edited by: itb402 on Mar 9, 2008 6:05 AM

in your code you are already appending new nodes to the root node. so what exactly is your problem? The following steps are usually taken for appending a new node:
1. Read the XML document
2. Build a DOM tree
3. Navigate to the node under which you want to insert the new node
4. Create a new node.
5. Insert the new node to the node selected in point #3.
~Debopam

How to append existed jar file?

do existed jar file be append again?
example:
a.jar // existed jar file
xyz // forlder that want append to a.jar

you mean you want to add a directory full of class files to the existing .jar file?
check the .jar file usage options.
c:\> jar -helpDiablo

Append rows to existing xls file

Similar Messages

Maybe you are looking for