Append two files with added time stamp

Hi experts,'
MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp.
How to achive this as with append we do not get option of adding time stamp.
Other thing is I want all the appended files should be there  in Receiver folder means like if we get two files today they should be appended to one and shld be put in Receiver folder then two files for tomorrow and they shoud be appended as a separate file in Receiver Folder.
How to achive this??
Regards,
Nidhi

Hi Nidhi,
>>MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp
Use BPM and pick the two files
>>Other thing is I want all the appended files should be there in Receiver folder means like if we get two files today they should be appended to one and shld be put in Receiver folder then two files for tomorrow and they should be appended as a separate file in Receiver Folder.
Use variable substitution and create the directory and filename dynamically...
Use Dynamic configuration module in receiver adapter and do as specified in this blog:
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot
Regards
Suraj

Similar Messages

  • Idoc- File with date+time stamp, getting overwritten

    Hi,
    I have a scenario where in am writing Idocs from R3 to a Txt File in 3rd party system.
    For an instance upon running a Tx, am generating 3 idocs. I need all these 3 idocs to be written to a single file. Hence for the file naming i have used "CREDAT_CRETIM.txt" from EDI_DC40(all idocs carry same date+time).
    I have configured the file mode as Create -> using Temporary fileschema of "Ord.xfr". I need this for locking before FTP to the 3rd party system.
    If i check the OVER WRITE EXISTING FILE checkbox, i get only the last idoc written to the file(overwriting previous 2 idocs).
    If i Uncheck the OVER WRITE EXISTING FILE checkbox, i get only the first idoc written to the file(other 2 idocs are not written) they are shown successful in MONI.

    hi BRamchan,
    >>>><i>If i Uncheck the OVER WRITE EXISTING FILE checkbox, i get only the first idoc written to the file(other 2 idocs are not written) they are shown successful in MONI.</i>
    If you can see in moni successfully process, look in the RWB communication channel monitoring of the receiving channel, there you might find error.
    regards
    Ramesh P

  • File adapter- Add time stamp

    Dear All,
    Scenario:-
    File to Proxy and Acknowledgement SAP to File.
    Once the file is received by SAP and first ack is send as recepit of file to Legacy system, after that the process goes ahead and do other validation and the same outbound proxy is triggered and send the respeonce.
    Now in Ack i am using the same strucutre to send the file receipt and the other response and in file adapter I am differentiatiing the file with Add time stamp option.
    Problem:-
    My Ack Response from R3 is coming very immidiately. For example Reciept time stamp and other response time stamp is same.
    Hence my legacy system is not able to differentiate which is the first flow. Ideally after receipt the other file will be seen by Legacy.
    How can I resolve the problem in case when the time stamp for both the flow is same.
    I can see Add time stamp option has yyyyMMdd-HHmmss-SSS wat is SSS stands for?
    Chirag.

    Hi,
    My Ack Response from R3 is coming very immidiately. For example Reciept time stamp and other response time stamp is same.
    Request / response timestamp can't be same, even if it happens at real time.
    I can see Add time stamp option has yyyyMMdd-HHmmss-SSS wat is SSS stands for?
    SSS is milliseconds having values between 000-999.
    Regards,
    Neetesh

  • Sender File adpater to Pick Two files at a time based on the file name

    Hi Everyone,
    I have a scenario where I need to pick two files at a time using file adapter where the two files names have a common string in between their names.For example , the file names can be sets like
    H123.txt and L123.txt
    H345.txt and L345.txt.
    Now how do we handle this in the File Adapter ?

    Anu,
    Two approaches.
    1.     Use BPM: use a collect pattern to pick those files: L and H files , use multi mapping to merge those files and map to IDoc. Constraint is that there must be a mandatory correlation field in both the files. Say a same po id  in L and H file.
    2.     Use an Adapter module with additional files option in file Adapter. Operate on the Main payload and attachment inside your module code to get a combined contents of both files and proceed.
    Module is preferable in terms of performance, but maintenance is difficult. Deployment after each changes, transport issues, etc.
    BPM is resource intensive, but easy to maintain, transport.
    Choose based on your requirement.
    Regards,
    Sudharshan N A

  • Writing arrays to text data with continious time stamp

    Hi Friends,
    I have the following problem.
    I want to create a text file looking like this:
    12,30,10, 10:30:00     12.05.2007
    12,31,10, 10:30:00,1  12.05.2007
    12,32,10, 10:30:00,2  12.05.2007
    12,33,10, 10:30:00,3  12.05.2007
    12,34,10, 10:30:00,4  12.05.2007
    12,35,10, 10:30:00,5  12.05.2007
    12,36,11, 10:30:00,6  12.05.2007
    12,37,12, 10:30:00,7  12.05.2007
    12,38,13, 10:30:00,8  12.05.2007
    12,38,16, 10:30:00,9  12.05.2007
    12,39,18, 10:30:01,0  12.05.2007
    12,39,18, 10:30:01,1  12.05.2007
    12,39,18, 10:30:01,2  12.05.2007
    the first 3 values are read from a file ,recorded as array and than plotted in chart.
    the beginning time (e.g 10:30:00  12.05.2007) is also read from a file and set as beginning of the chart with a property node. The problem is here , after I set the beginning time to the Chart I have nothing to do with it for the rest values, since samples/sec is also sent to chart.
    So how can I write the a txt file including the time stamp with ms incrementations?
    Thanks alot for your responces.
    john

    Hi John.
    I would use a Time Stamp and "Format Into String" with e.g. %<%.1X>T.
    Syntax details are in the LabVIEW Help - Search for "Format Specifier Examples".
    Regards, Guenter

  • Multiple channel data with different time stamp logging

    I have peaks and valleys from multiple channels with different time stamp but I am not able to log to a single file. Any idea on how to do this?
    Attachments:
    Single Point Peak Valley Log.vi ‏53 KB

    Hi Dennis,
    Sorry for that I have modified the VI.
    Because the peak and valley of every channel will occur at different time and I want to log the peak/valley with the time stamp.
    How can I log them on the same file.
    Attachments:
    Single Point Peak Valley Log_Mod.vi ‏53 KB

  • How to merge/append two files in sequence using BPM

    Hi All,
    My senario is to append two files data into a  new file on target system, only if the two files are available on source system. In case one file on the source system, no need to process file. Data in the new file should be in sequence means 1st file data then 2nd file data.
    Please suggest me how can i achieve this functionality using BPM.
    Thanks & Regards
    Sreeni

    For the first part (two files required) design as per Prateek's suggestion
    Data in the new file should be in sequence means 1st file data then 2nd file data.
    create a data structure which will be a combined structure of File1 and File2....target structure should have first reference for File1 and then for FIle2....than having two MTs (File1 and File2) at the source and the target MT at the receiver create your mapping......this will ensure that File1 data occures first and then File2 data.
    Regards,
    Abhishek.

  • Send the same   message to two receivers with some  time difference..

    Hi
      I want to send the same message to Two receivers  with the slight time difference.. becuase  but not at the same time.. if the same time means.. just we can  specify the two receivers in the one receiver determination..
       but  if i want to send the   same message to Two  reveivers with the time difference means..(after sending the  message to first receiver.. after  some time gap.. i need to send the  message to second receiver..
      this type of scenarios how can we do.. is it possible to do with out BPM...  please suggest me the solution..
    Thanks
    Jain .P

    Hi Jain,
    With BPM you can easily do it.
    i am giving you the steps:
    1)first add a receive strep to get your message
    2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
    3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
    4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
    5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
    **Reward points if helpful...
    --Sankar Choudhury

  • CDHDR table entry updation with different Time Stamp

    Hi Experts,
    I'm changing the Contract Partner First Name. The time stamp updation in Change Document Object DEBI is with UTC but the BUPA_BUP Object with Local Time Stamp.
    We want both time stamp with the UTC.
    Time Zone mentioned at SPRO level is UTC.
    Have anyone faced such situation earlier?
    Thanks and Regards,
    Jyoti Shankar

    Jyothi,
    I'm not sure whether this answers your query or not but suggest you to look at these 2 FMs'
    BUS_CUA_VARI_FUNCTION_CONVERT
    BUS_LOCATOR_OKCODE
    Ist FM uses table TBZ4 that uses GUI.
    Probably this is the reason you view object BUPA_BUP in the table with GUI time.
    Rgds
    Rajendra

  • How to put two files with the same name into the same folder?

    How can I put two files with the same name and the same extention into the same directory?
    Is this even possible?
    Thanks in advance. 

    Are you sure? I would be very surprised if that was the case.
    How does the computer/filing system differentiate the files, if not by their names?
    How do you tell the computer which one you want? (On the command line.)

  • HT3775 I can't open MPEG 4 -movie files with Quick time or VLC

    I can't open MPEG 4 -movie files with Quick time or VLC

    VideoLAN - Download official VLC media player for Mac OS X

  • In deleting an i message  the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

    in deleting an i message  the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • CUOM 2.3 sends multiple notifications for Event StoppedGSUPerformancePolling with same time stamps

    Hi Alll,
    I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
    Does anyone have a solution for that.
    Regards Michael
    This message is generated 8 times with the same time stamp in all messages.
    ** This message is generated from Cisco Unified Operations Manager **
    ALERT ID                = 00012OW
    CREATION TIME           = Sat 30-Oct-2010 16:31:57 CEST
    MODIFIED TIME           = Sat 30-Oct-2010 17:00:58 CEST
    STATUS                  = Active
    SEVERITY                = Critical
    MANAGED OBJECT          = 183.201.141.193
    MANAGED OBJECT TYPE     = VoiceGateway
    ASSOCIATED EVENTS       =
        Cleared:183.201.141.193:Unresponsive
        Active:183.201.141.193:StoppedGsuPerformancePolling
    CUSTOMER IDENTIFICATION = Voice Port
    CUSTOMER REVISION       = Voice Port

    if you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
    The problem obviously lies in the part path they have in common.
    It is not unusual to see the highest backbone loads during the night, due to backups being taken.
    Make sure the most important inter-switch links have no errors.
    I would rather fix this then turn off alerting.
    Cheers,
    Michel

  • Two signals on two outputs with specific time interval

    I cant manage with following:
    Have NI-6251 card. Trying to sent two step-signals on two outputs with
    specific time interval, say 1 to 10 ms with 1us accuracy.
    How can I start?
    Thanks!

    Hi Anonymous,
    What do you mean by step-signals?  Do you mean a signal that steps up the voltage over time, a step function signal that is zero until a certain time then goes to 1, or a pulse train?
    In the meantime you can find examples for getting started in the NI Example Finder by selecting Help » Find Examples
    When that opens you can limit the examples to ones that are compatible with your hardware.  In the bottom left corner select your hardware and check the Limit results to hardware box.
    Browse to Hardware Input and Output » DAQmx » Digital Generation or Generating Digital Pulses.
    Best Regards,
    Bryan H.

  • Our version of ID saves all files with the time/date of December 31, 1999.  How do we fix this?

    Our version of ID saves all files with the time/date of December 31, 1999.  How do we fix this?

    That's interesting. The file date should match the system date. What's the system date? What version of InDesign? What operating system?

Maybe you are looking for