File adapter- Add time stamp

Dear All,
Scenario:-
File to Proxy and Acknowledgement SAP to File.
Once the file is received by SAP and first ack is send as recepit of file to Legacy system, after that the process goes ahead and do other validation and the same outbound proxy is triggered and send the respeonce.
Now in Ack i am using the same strucutre to send the file receipt and the other response and in file adapter I am differentiatiing the file with Add time stamp option.
Problem:-
My Ack Response from R3 is coming very immidiately. For example Reciept time stamp and other response time stamp is same.
Hence my legacy system is not able to differentiate which is the first flow. Ideally after receipt the other file will be seen by Legacy.
How can I resolve the problem in case when the time stamp for both the flow is same.
I can see Add time stamp option has yyyyMMdd-HHmmss-SSS wat is SSS stands for?
Chirag.

Hi,
My Ack Response from R3 is coming very immidiately. For example Reciept time stamp and other response time stamp is same.
Request / response timestamp can't be same, even if it happens at real time.
I can see Add time stamp option has yyyyMMdd-HHmmss-SSS wat is SSS stands for?
SSS is milliseconds having values between 000-999.
Regards,
Neetesh

Similar Messages

Appending and add time stamp at a time........

Hi all,
i am working on a scenario...
it is file based..no mapping and bpm can be used.
I need to pick up file through xi and append it and put in the target with time stamp to it.
we can achieve this if mapping or bpm is allowed.....
But,in file processing we can use only one option at a time.....
I found a way:
scenario one: files will be appened and kept in a temparory folder
using another scenario we will pick up the appeneded file and add time stamp and keep in target structure...
but i dont think this is advisable...
please suggest me any other ways to achieve this...(can run operating system command be helpfull??)
thanks in advance..
Regards,
Kiran.

HI,
Yes you are right, Appending and adding Time Stamp will not be possible simultaneously.
Refer - this could help you
Dynamic Filename with TimeStamp
Dynamic Filename with TimeStamp
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
But some how you have to use mapping for it. Then if its allowed to use the mapping then as you have suggested, should have to go for two scenarios. No alternative,
Probably also you can try with Customized Adapter Module for this.
Thanks
swarup

Add time Stamp format in File Adapter

Is it possible to change Add Time Stamp format ??
If so please let me know the procedure to chnage it..
It is scenario with no mapping so i cant go either Dynamic configuration or Variable substitotion.
Thanks & Regards,
Polas

Hi,
I think you need to assign it dynamically as you cannot change the format for Add TimeStamp
See the below links:
File Adapter: Dynamic file name
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Thanks,
Tiny

Receiver FTP processing parameters should not add time stamp

Hi Gurus,
           I want to write the file at receiver end with the same name as in source directory.. (I dont want the time stamp to be added to my file at receiver side)
         For that i have configured processing parameters as
            1) File Construction mode --- create
            2) checked Overwrite existing file
            3) Put File -
use temporary file
            4) Temporary File Name Scheme --- rec_*.tmp
            5) File type -
binary
But the files are not written in target directory..
How to troubleshoot it...
Thanks and Regards,
govada.

Hi,
open RWB - coomponent monitoring
and then - adapter monitoring or communication channel monitoring
(depending on SP of your XI)
then find your channel and you will see the error - if there is any
BTW
if you don't want the timestamp just don't use:
Add Time Stamp property in the file adapter
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How do I add time stamp to photo in photoshop?

How do I add time stamp to photo in photoshop? I have saved photos from a camera phone to the computer. They still have the META data on them (aka the date and time from when the picture was taken). How do I put them on there?

The following is old but may still be valid with Yosemite (it addresses how to remove the name but indirectly also how to display it): http://osxdaily.com/2012/01/10/remove-user-name-from-menu-bar-os-x/

Add time stamp array into first column of text file

I am writing daq output to a file by using array to spreadsheet string vi then write that to a file but I would like to add a time stamp array into the first column of the text file. How do I do this?

When you use a DAQmx Read, you have the option of returning a waveform data type. This includes time data. If you were to use this and either Export Waveforms to Spreadsheet File or Write Measurement File, this would included. To stick with the regular Write to Spreadsheet File, you would have to create an array of timestamps yourself based on a start time and the sample rate of the DAQ. Then you would convert this and the data array to strings and use the string array type of Write to Spreadsheet instead of the DBL type.
Message Edited by Dennis Knutson on 09-25-2007 01:12 PM
Attachments:
Write to Spreadsheet - Strings.PNG ‏1 KB

Write mode :Add Time Stamp in J2SE Adapter

Hi All,
We are using J2SE receiver adapter while converting Idoc to File and the file comes in the following format.
<filename>20080310-104448-995.dat
But client wants it in more specific format.
<filename>.D20080310.T104448.P00995.dat
or
<filename>-D20080310-T104448-P00995.dat
I have got no idea on this. So , if any one of you is aware, request you to let me know......
Thanks,
Viji

Hi,
I think you need to assign it dynamically as you cannot change the format for Add TimeStamp
See the below links:
File Adapter: Dynamic file name
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Thanks,
Tiny

Append two files with added time stamp

Hi experts,'
MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp.
How to achive this as with append we do not get option of adding time stamp.
Other thing is I want all the appended files should be there in Receiver folder means like if we get two files today they should be appended to one and shld be put in Receiver folder then two files for tomorrow and they shoud be appended as a separate file in Receiver Folder.
How to achive this??
Regards,
Nidhi

Hi Nidhi,
>>MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp
Use BPM and pick the two files
>>Other thing is I want all the appended files should be there in Receiver folder means like if we get two files today they should be appended to one and shld be put in Receiver folder then two files for tomorrow and they should be appended as a separate file in Receiver Folder.
Use variable substitution and create the directory and filename dynamically...
Use Dynamic configuration module in receiver adapter and do as specified in this blog:
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot
Regards
Suraj

Add time stamp in Final Cut?

In Final Cut is there any way to add a time stamp, like what you get on a consumer camcorder? The customer wants the date and time to show on the final video. The time and date was not recorded when I recorded the event.

In the mean time, to get this project done, it looks like I'm editing 60 tiny titles for my one hour video.
I'm not expert in Motion, but if you already have it, give yourself 5-10 minutes to try and publish the Time Date generator. The basic steps are (I'm doing this from memory so the names of things might be wrong):
1. Sart up Motion and choose a new FCPX Generator template project. Set the project settings that match your own project settings in FCPX.
2. Drag the Time Date Generator into the project.
3. Publish all the parameters you might want to change in FCPXby right clicking on them and selecting publish parameter.
4. Save the project. this will ask you for a name and category, which once saved, automatically appear in FCPX.
5. Drag that one new generator to your project, change the duration to fill your whole timeline, and set the parameters to your starting date/time.

Add time stamp?

Hi, I'm wondering if there is a feature or a way in FCP to stamp the new time-code on a video I'm creating? (better yet, if i can show frames count instead).

Effects -> Video -> Timecode Generator
You can choose "Frames" from the Format popup.

Idoc- File with date+time stamp, getting overwritten

Hi,
I have a scenario where in am writing Idocs from R3 to a Txt File in 3rd party system.
For an instance upon running a Tx, am generating 3 idocs. I need all these 3 idocs to be written to a single file. Hence for the file naming i have used "CREDAT_CRETIM.txt" from EDI_DC40(all idocs carry same date+time).
I have configured the file mode as Create -> using Temporary fileschema of "Ord.xfr". I need this for locking before FTP to the 3rd party system.
If i check the OVER WRITE EXISTING FILE checkbox, i get only the last idoc written to the file(overwriting previous 2 idocs).
If i Uncheck the OVER WRITE EXISTING FILE checkbox, i get only the first idoc written to the file(other 2 idocs are not written) they are shown successful in MONI.

hi BRamchan,
>>>><i>If i Uncheck the OVER WRITE EXISTING FILE checkbox, i get only the first idoc written to the file(other 2 idocs are not written) they are shown successful in MONI.</i>
If you can see in moni successfully process, look in the RWB communication channel monitoring of the receiving channel, there you might find error.
regards
Ramesh P

Search for a file name by time stamp

Powershell allows us to append the date faily easily to a file name (eg. "test.txt $(get-date -f dd-MM-yyyy).txt"). I'm looking for a simple script to search for a powershell script by a static name with todays date appended. I
then want to move that file to a another location and rename it. For example lets say the file name is test.txt always and a 3rd party software names it to test12-9-14.txt daily so tommorow it would be test12-10-14.txt and so on. Each day I need
to take the file testxx-xx-xxxx.txt from the the c:\ drive and move it to the w:\ drive and change the name from testxx-xx-xxxx.txt to test.csv.

I found the typo mm instead of MM which was my problem from the beginning. MM represents month not mm. A simple mistake that costed a lot of time. Thanks Mike
Cheers, you're very welcome. Glad I could help out.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Excel file name with Time stamp, also from a template?

Hi i created this little vi that opens an excel template, then populates it with pressure and temperature values. that part worked fine.
My issue is i'd now like to rename that template file so i can append the current date and time. ive started off trying to do this, but got a bit stuck! any ideas?
ideally i want labview to pick the template residing at A, rename it, then save it in location B.
How is this achieved?
Many thanks
Attachments:
sepearet vi's.zip ‏33 KB

i guess there are some native vis in the report generation toolkit (for excel), did you had a look in to them?
If not may be you can, copy/move file found in the file i/o pallette
Regards
Guru (CLA)

NI unzip changes file date and time stamp

A coworker this morning asked me about the NI-Unzip VI.
It turns out that when the NI unzip VI unzips a file it changes the file dates to the date the file was unzipped.
He also noted that NI-Unzip seems to be calling the Windows touch.exe to do this.
The diagram for NI unzip is locked and password protected so his attemp to change this action blocked.
Does anyone know a way around this? Either to make the NI Unzip stop changing the file date or the passwork to teh unzip vi?
Message Edited by RTSLVU on 03-22-2010 08:01 AM

Hi,
I don't think NI will give you a password for it's protected functions...
So you can:
- use "System Exec" with a command line version of a ZIP tool of your choice to unzip files
- make your own "Unzip" VI with calls to a "unzip"-DLL of your choice
Choose the one that is easier to implement for you
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

PI FTP Adapter: u201CAdd Time Stampu201D adds a subdirectory instead of a prefix

SAP PI FTP Adapter: u201CAdd Time Stampu201D will add a subdirectory instead of a prefix to the file name.
Flow: SAP ECC 6.0 <- Idoc <- XI/PI 7.0 - FTP Adapter <- Partner
Incoming file: "xxx_ack_MATMAS_pdt_80271":
Adapter Add Time Stamp will add new subdirectory: "20110210-023047-618_/"
It should only add a prefix to the filename: "20110210-023047-618_"
So the problem is the "/" it is adding, which creates a new subdirectory.
The error:
Attempt to archive file "/data/XIinterface/PRD/DWMS/FR/Inbound/Archive/20110210-023047-618_/xxx_ack_MATMAS_pdt_80271" after processing failed with java.io.FileNotFoundException:
(No such file or directory).
The directory that exists on the OS is:
"/data/XIinterface/PRD/DWMS/FR/Inbound/Archive/u201D
The directory that is attempted to be created is:
"/data/XIinterface/ PRD/DWMS/FR/Inbound/Archive/20110210-023047-618_/u201D
Solutions:
1. Unselect u201CAdd Time Stampu201D -> Partner is sending the Time Stamp
2. UDF (User Defined Function) -> remove the "/"
Regards
Metusala Dikobe

Hi Stefan,
Do you mean to say that the 'Add time-stamp' property of the File Sender adapter is actually creating a folder with the current timestamp for you?
Regards,
Diptee

File adapter- Add time stamp

Similar Messages

Maybe you are looking for