Apple loops again... again

I installed the new Garageband, but decided to work in Garageband ´11 (5) instead. Fine.
But something happened with my apple loops. I have no flutes anymore, occationally i found one that the system didn't recognize, a mideveal flute. I bought the full packet of loops that can be added to Garageband 10, where do I find them? And how do I add all the loops to Garageband '11......... I try to read former letters on this issue, but haven't found out anyting. For example this page http://support.apple.com/kb/ht1045 . Both places they tell me to find loops in
/Library/Application Support/GarageBand/Apple Loops/ or /Library/Audio/Apple Loops/Apple/
have empty folders, are the loops hidden? Or the folders are not placed like this.
As I understand form another discussion, when I find the loops I can just drag them to Garageband, loopsbrowser for Garageband to find them.... is it true?
Bodil

Hi Léonie
Thanks for your answer... :-)
I had lots of loops in /Library/Audio/Apple Loops/Apple/
I removed them to a folder on the desktop.
The folder /Library/Application Support/GarageBand/Apple Loops/ didn't exist'
And I had no loops in the folder
/Library/Audio/Apple Loops/User Loops
I deleted the loops and opened garageband, still some loops in garageband ?????
I dragged the loops to the loopsbrowser anyway... ?????
Now I have two new flutes and no medieval flute in an new song.... but still the medieval flute in an old song???
Now all the loops shows in the user folder
/Library/Audio/Apple Loops/User Loops
And the following folder is empty /Library/Audio/Apple Loops/Apple/
Wonder where do the resisting loops hide? This is the great answer and how do I find them???
:-) Bodil

Similar Messages

5s phone says IOS8 "Update completed", but when I continue through options it loops back again???

5s phone says IOS8 "Update completed", but when I continue through options it loops back again. How do I get past the loop and make the phone work?

Hi saz3011,
Welcome to the Apple Support Communities!
I understand it can be frustrating and concerning when your iPhone will not startup as you would expect. I know that you have tried restarting the iPhone as well and the issue continues. There are a few more troubleshooting steps that I would recommend in this situation. Please use the attached article as a resource for troubleshooting.
iOS: Not responding or does not turn on
Have a great day,
Joe

My iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% batt

my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...

Hello s0ha1b
If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

I Want Get Removed My Apple ID Account From Apple And Create Again.

I Want TO Delete MY Apple Id Account From Apple And Create Again,

You can't delete an account, all you can do is remove personal info from it and stop using it - any content that you downloaded with the account will remain tied to the account. If you want to use its email address on another account then you will need to replace it on that account first e.g. by tapping on it and logging into it via Settings > iTunes & App Store on your iPad, the Store > View Account menu option on your computer's iTunes, or via http://appleid.apple.com

When will apple release BBM again?, When will apple release BBM again?

I just want to know when will apple release BBM again?

Its not up to Apple, its up to RIM. The makers of Black Berry and Blackberry Messenger.
It was pulled because there was a securtiy breach.
Its up to RIM to put it back. Apple has nothing to do with it.

I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

Sorry, just to confirm, I DID NOT ACTUALLY ANSWER MY OWN QUESTION!
I replied to the previous message from my iphone and I managed to hit the link to "This has answered my question" by accident!
I AM STILL LOOKING FOR A RESOLUTION TO MY ORIGINAL PROBLEM. CAN SOMEONE ALSO NIW TELL ME HOW TO GET RID OF THE GREEN TEXT TGAT SAYS TGAT MY QUESTION IS ANSWERED? That is a pain! It should at least ask you to confirm that your question is actually answered and you didn't hit it by mistake, like I did!

Midi tempo/key Apple Loops

I tried working with Apple Loops and an extensive external midi rig the other day and came to an impasse at trying to do the following.
Any suggestions?
I used a ton of Jam pack loops with original loops in exs24 and external modules
What I wanted to do is to only change the tempo of the midi tracks(ostinatto mallets) and leave the loops at existing tempo.
Basically wanted to double the tempo of the midi track against the existing audio loops...
Any way to lock the Apple Loops at existing tempo?
thanks
Pat

I guess you could do like this; Bounce the loop as a regular AIF and add to audio window, then bring it to your arrange again, and just loop it regularly. If you now change the tempo of the song - the aif will stay as it were (unless you click follow tempo...)

Converting Acid Apple Loops -great App.!!!

Sample Manager does this perfectly! Once your Acid .wav files are converted to 44.1kHz aif Apple Loops with correct tempo & beat information, you can then load the files into the Apple Loops Utility for batch or individual tagging (genre/Instrument etc.). Once this is done & you've saved the results, you will have a new set of Apple Loops which you can drag onto the Loop Browser and they will be indexed perfectly.
Really, really useful. If you're not on Tiger yet-I'm not either- the Panther version of Sample Manager does the job with no problems. You might have to repair permissions before resaving the files if they came from a sample CD or commercial source (as they probably will).
Nigel

STLU is that is places the loops in a folder entitled "Converted to Aiff"
I honestly didn't find that an issue. The folder was created within the folder which had contained the bunch of loops (AFAIR). And since the loops were now tagged, all I was doing was dropping them into the loop browser where they were sorted, searchable, and fully accessible.
Then again, this was not much more than an experiment well over a year and a half ago <shrug>
--HangTime [Will Compute for Food] B-)>

Tempo setting when creating Apple Loops (Utility)

Having chopped a long audio file (drum track) into exact bar/beat settings, saved as separate audio files, I'm having trouble with tempo settings when creating Loops in Apple Loops Utility.
The problem is that after saving a looped file (from the Utility), upon loading that loop file into the Utility again, the (interpreted) tempo of the file is now doubled, which really screws up playback and placement of the loop file.
For example, my original tempo is 72bpm. I save the files as Looping, with the correct number of beats for each file (4 for a 1 bar file, 8 for 2 bars, etc.), and the tempo in the info section on the right side of the Utility correctly shows 72bpm. After saving the file as a loop, and then opening it again in the Utility, suddenly the tempo shows 144, and playback is at half speed.
Oddly, I was able to successfully do this to another track from a song at a faster tempo. In that case, the loop files open as expected. And I'm using exactly the same process this time... humm???
How can I get around this?

mmGhost wrote:
Hi, thanks for the tip.
In this case, I have not added the loop to the loop library. Therefore it is not in the browser.
If I drag it from the audio bin, however, sometimes it will work. Other times it does not. I cannot seem to find a "cause and effect" here.
Thanks.
What version of Logic are you running. It works fine for me on Logic 9.1.3 in 32-bit mode. I seem to remember having the same problem as you're experiencing in Logic 8.0.2

Homemade Apple Loops (w/Loops Utility) won't show up in Loop Browser

I just finished making a whole batch of homemade Apple Loops. Through Logic I opened up each audio file in the Apple Loops Utility, marked its tempo, marked "Looped" and then did the transients window to make sure it sounded good, then did "Save" or "Save All" from the Apple Loops Utility task tray.
I then dumped that folder full of custom loops into my loop browser for catalog'ing, but for some reason only about 10 of them show up when I click "All" to see all the loops in that folder.
So I re-opened the entire batch in Apple Loops Utility and made tiny changes to each loop's transients, just enough to trigger the dot next to the loop that means "you need to save these changes" - and I resaved the entire batch.
Tried the add-to-loop-browser process again, and again, only those initial 10 loops showed up in the browser again. The remaining 190 won't pop up.
I can't figure out what's missing or what I did wrong. Any ideas?
Kirby

FIXED!
If you run into this same problem:
In order for your homemade loops to show up in Logic's Loop Browser, when in the Apple Loops Utility you need to select at least one "Descriptor" - if you don't, the loop won't appear in the browser. Even if you don't need a Descriptor, just batch-select all of your loops in the tray and then pick 1 Descriptor, resave, and re-drop into Apple's Loop Browser.
Kirby

Logic 9 Pro won't load apple loops library or EXS24 Instruments!

First off, specs:
I'm running 9.1.8 on OSX 10.8.2
I recently purchased a brand new 13" MacBook Pro (early this december) and used migration assistant to transfer my accounts, apps, and such from my old hard drive to my new one. Everything seems to be in its place and running fine, except for Logic 9 Pro.
Whenever I load up a session featuring the EXS24 sampler, the loading bar will hang up upon loading the instrument, eventually turn into the spinning wheel of death, and become unresponsive. This also happens when I create a new session, open up a new instance of EXS24, and attempt to load a patch. All of the other stock Apple instruments load up just fine.
I also noticed that Logic can't locate my Apple Loops Library, as every option in the loop browser is grayed out. I went into my library folder and found the EXS patches as well as the Apple loops, so I know they're there!
Unfortunately, I don't have a Logic 9 CD (It came preinstalled on my previous computer), so to my knowledge reinstallation isn't an option, unless there's a way to reinstall Logic 9 without a CD and without losing my license. I've already tried the following to resolve this issue:
- Reindexing spotlight
- Reindexing loop browser
- Disabling spotlight on the volume where the Logic files reside
- Deleting the Logic 9 preference file
If anyone has any insight or a way to reinstall Logic 9 Pro without a CD and without losing my license, it'd be greatly appreciated!

Hi
You probably need to re-index the Loop Library.
In Logic 9 control click on the Loop Library and choose "Reindex"
In Logic X use the Loops Menu at the top and again, choose "ReIndex".
If that does not do it, you may need to manually remove the Index files
CCT

Creating Apple loops within the arrange window

I have tried this before and had the same result again and again.
I have a stereo recording of a drum kit at 120 bpm which I have chopped to a 2 bar cycle and want to turn it into an apple loop. to fit it into the song I am working on which is at 100 bpm.
I select "add to apple loops library" from the Region drop down menu in the arrange window. the apple loops genre selection window opens which adds it to the apple loops browser. easy!
But when I drop the loop back into the arrange window onto an Audio track within the same song which is 100bpm, it stays at the original tempo and doesn't snap to the bar. but still loops stretches and does what an apple loop should do but at the wrong tempo. what is that all about?

with an extra note to my comment above
if you've dropped the loop from the apple loop browser to the arrange window you then have to open it again in apple loop utility to sort it out by selecting "open in apple utility" from the Audio drop down menu on the arrange window which gives you a chance to edit it properly and now I have a decent loop. but then I have to save it again in the initial menu "add to apple loops" which I have to reclassify it again I thought it'd be a good idea to actually get rid of the first menu choice "add to apple loops" window and just have a window within logic which uses the same engine as apple loops utility and uses the same audio channel (the Last enabled channel in the Environment to Audition the loop because now when Apple loop utility opens the core Audio gets confused and comes out of my comuter speaker and then after a few cycles comes out of the Interface. I think there are too many "menu this", "loop utility that's" going on in logic. I do hope Logic 8 is going to trim away all the excess Lard which Logic has gained since mac took it off Emagic.

Importing apple loops -why do some in a folder work and some dont?

im trying to drag and drop all my sample cds i have on my external drives into the apple loop browser in logic, some are folders in folders in folders as most cds are..why is it that when i drag the whole sample cd folder and drag it in that quite often just a few of the loops are installed in the window?..ive even tried dragging single files ,,they just seem to disapear although if i try to re-drag folders or files, im told they are already there?..i have some that have worked fine others dont even appear in the menu even tho if i try again it says they are there?..im keen to use the browser for audiotning sounds even if theyre not tagged ..anyone?..this is sooooo frustrating..many thanks in advance.,..T

you can search for this problem using google to see if any solutions work for you. but i found this post by urami (who is very knowledgeable):
It has nothing to do with font name itself. Also, by the way, font being a system component, can't be easily renamed in NotePad. You will need dedicated font editing tool like Macromedia's Fontographer. Anyway, Flash simply does not support some fonts and font's families. Unlike Other tools you brought up, Flash is vector based and not catered to handle all kind of fonts, but specific groups only. In fact if you deal with more applications, you will realize that it's a common issue. CorelDraw supports literally any font, half of which won't never shop up in Photoshop, then these that show up in photoshop, half of it won't show up in Flash, and so on. You just can't use all the fonts and it won't matter whatever you change their names. It's all about the font and its outlines and the way it is made. -- Best Regards Urami -- "Never play Leap-Frog with a Unicorn." If you want to mail me - DO NOT LAUGH AT MY ADDRESS

Apple loops download doesn't work?

Just upgraded to a new iMac and noticed many of the standard Apple loops are greyed out. When I double-click one, I get:
"The Software Instrument or Apple Loop selected is not currently installed on your computer. Would you like to install the complete set of Garageband instruments and loops?"
Selecting "Download Now" and clicking "OK" causes Software Update to launch, but the latter tells me everything is up to date and it quits.
If I later go back and click on the missing loop again, I get:
"The Software Instrument or Apple Loop selected is currently being installed. You have already initiated the installation of additional content for GarageBand via Software Update. For additional information please open the 'Software Update' application."
Nothing is, of course, happening with Software Update. It quit thinking there was nothing to do, and opening it again will only result in the same message that everything is up to date. I can't figure out what to try next. Any suggestions?

I just went through this about five minutes ago; I'm running OS X 10.6 Snow Leopard, with iLife 11. My system was upgraded to both of these (I think it came with OS X 10.5 and iLife 9). The extra loops don't seem to be on either DVD, however if you reinstall the default loops package, that seems to kick things into gear.
No matter if I selected Download now or Download later, the loops refused to show up in Software Update.
Here is what worked for me:
Quit GarageBand
Insert the iLife 11 CD
Right-click on the "Install iLife" icon, and choose "Show Original"
Run the GarageBand_Loops.pkg package. Go through the installation, once that's done:
Open GarageBand
I then opened a song I'd made with loops.
Click on one of the missing loops. (Yes, they're still missing, but that's ok now)
Select Download Later.
Quit GarageBand
Run Software Update
The 1.2GB "GarageBand Instruments and Apple Loops" update showed up! Finally!
Let Software Update install it.
I just did this five minutes ago (May 20, 2011)
I just opened my song in GarageBand and all the loops that were missing are there now! Success!

Apple loops are greyed out

okay first off, if you try to give me a link to other FAQs it will not help as i have searched them already, only to find that they have helped me not in the least...
here is my problem
1. i make a new project 2. i go to the show loops in browser 3. when i go to the browser where the loops are they are there but greyed out 4. when i try to click on them it says "The Software instrument or Apple Loop selected is not currenlty installed on your computer. Would you like to install the complete set of GarageBand instruments and loops?" 5. i click yes to download now 6. it check for updates and then says your software is up to date 7. i try again and still the loops are greyed out.
at this point i am extremely mad and decided to look online for help
i followed some FAQs and decided to locate my loops folder which low and behold
EXISTS!! i decide to play the loops in quicktime and turns out they are working fine all 501 of them.
So why the DARN doesnt garageband recognize that these loops are installed and on mymac?
Please help

no man!! did you even read my post i said dont give me links!!!
i have been to that site and nothing in there helped me
unless i just dont know where to look, if so then do tell me...
although i am starting to believe you are a bot
which would be very lame

Apple loops again... again

Similar Messages

Maybe you are looking for