Application Advice (824)
Hi Gurus,
I am not able to find the proper Idoc type for EDI 824, can you please tell me what will be the * IDOC TYPE, MESSAGE TYPE, AND PROCESS CODE* FOR this.
Thanks
Amresh
Idoc type : ISU_ADVICE
Message type also : ISU_ADVICE
Similar Messages
-
Database timetable/schedule application advice?
Hi. Looking for a bit of advice.
I have been asked to create a database/web application for a
golf club that
will allow them to display draw times for specific
competitions.
Here is an example:
The competition is 3-ball (3 golfers tee off together), and
the tee-off
times are, initially, a 7 minute interval, then 8 minutes,
then 7 again, 8
etc.
So, on paper, it looks something like this:
7:00am 1 Dave Smith
2 Paul Reed
3 Michael Jones
7:07am 4 Peter Wright
5 Roberto McGuffy
6 Carlos McGhee
7:15am 7 etc
8 etc
I need to allow the client to be able to add a new
competition, enter
golfers in vacant time slots, edit golfers who want to change
their time
slot.
The problem I'm having is in the 7 and 8 minute alternating
intervals and
also how to tie the numerical playing order in with those
intervals.
Here are my thoughts on the competition database table:
competitionID
competitiontitle
competitiondate
competitiontype (3 or 4 ball - numerical 3 or 4)
1stinterval (7 minutes - numerical 7)
2ndinterval (8 minutes - numerical 8)
1stteeoff (time - 7:00am)
lastteeoff (time - 5pm)
And the golfers table
golferID
competitionID
golfername
runningordernumber (numerical)
Another problem is that I need to display, on the site, the
complete
timetable for each competition, with all available time slots
so that
golfers can check the site and see what times they can
choose.
Any advice on a solution to this would be greatly
appreciated, thanks.
Regards
nathon.Its a case of horses for courses. Both programs can play with
your proposed web page.
If you have both programs then use whichever is most
familiar. I would use Dreamweaver because I don't have Coldfusion.
Depending on your experience, both can have a steep learning curve. -
Charting within Web-PL/SQL Application - advice required please
Currently trying to enhance our Designer generated Web-PL/SQL application by including charting.
There is no provision to do this within Designer so are exploring other solutions, specifically using a server side servlet to render a chart as a gif, returning this to the client HTML page.
Has anyone got any recommendations on what to use to do this?
We've tried with limited success calling the Portal servlet (called chart) due to lack of documentation and relience on certain Portal procedures. We're currently experimenting with Oracle Chartbuilder, which looks promising, but would really like to know what the recommended or favorite solution is!
Any feedback appreciated!
Anthonyuser645399 wrote:
Right now, I am displaying a table in the web by selecting all the records from a particular table.
This is how I do it.Not a great way to display a report. This is not re-usable code. Difficult to maintain. Difficult to add or change the presentation of data.
The proper way to do it, will be to use a DBMS_SQL cursor. After the cursor is opened, you use the describe function on the cursor that returns the number of columns in the cursor, the names of the columns, and their data types.
This data is then used to fetch a column value from the cursor, and render it (as per its data type). This can easily be extended to make use of reporting templates and defaults and even style sheets to make rendering easy and flexible.
DBMS_SQL is detailed in the [Oracle® Database PL/SQL Packages and Types Reference|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sql.htm#BABEDAHF] guide.
Should I include a search engine? or how should I go about it? Is there a way to break the table into smaller parts using the dealer id?Why not use APEX? The above method that I've described is what is employed by APEX. So instead of writing that yourself, having to deal with dynamic variable binding, pagination, web state and security and so on.. APEX does all of this, and more, for you. -
I just got my mac and I'm wanting to know what application would be best to create my own custom logo. I've looked through a few and just can't seem to find what I'm looking for. Thanks!
Adobe Illustrator is the most popular and full featured app for logos and other vector graphics..
If you want something a little less involved, you could try this
http://www.versiontracker.com/dyn/moreinfo/macosx/20243
or search that site for other options.. -
Hi
I should create an application that is rather simple, but I would like a suggestion on how to make it:
I should have a webcam pointing at a visitor (in a museum) and I should have the visitor shown on a big monitor (like he/she is in a mirror), but the image should have a delay of 2 seconds. This should be done to simulate how one sees himself if the mirror is on the moon (2 seconds delay due to light travel).
Of course I should do it in Director (ver 11)
Someone has some ideas?
Thank you very much
Valerio Oss
PIXEL CARTOONHi
I should create an application that is rather simple, but I would like a suggestion on how to make it:
I should have a webcam pointing at a visitor (in a museum) and I should have the visitor shown on a big monitor (like he/she is in a mirror), but the image should have a delay of 2 seconds. This should be done to simulate how one sees himself if the mirror is on the moon (2 seconds delay due to light travel).
Of course I should do it in Director (ver 11)
Someone has some ideas?
Thank you very much
Valerio Oss
PIXEL CARTOON -
Hi, I need to provide a movie with subtitles. Which application for mac would be easiest and fastest to learn and use? Thank you!
DimitarHi dimmimi,
If you are looking to add titles or subtitles to a movie project with your Mac, you may find the information in the following iMovie article helpful:
iMovie (2013): Add titles
Regards,
- Brenden -
1and1 Blog Application Advice.
I am not a coder and I just got some hosting space on 1and1's servers. I am using Dreamweaver to upload my site for the first time and here's my question.
I want to have one of the pages in my site be updated with a daily article and for all old articles to be archived where users can peruse them and comment on them. 1 and 1 comes with a blog application that I can use for free (I believe), but I know little about it. Do you guys know of a blog app that I can paste into Dreamweaver (I remind you that I'm not a coder) that will meet my previously mentioned needs and it's ease of use would put your aunt or uncle's mind at peace ? Does this exist ? Is it free ? Do you have an example of it at work on a site that I can check out ?
Thank You
bolthead88Now that've decided on Wordpress (more or less :-) there is a Dreamweaver extension available that may be helpful:
ThemeDreamer is an extension for Adobe Dreamweaver that can accelerate WordPress theme and application development
http://www.themedreamer.com/
and more:
http://max.limpag.com/2006/06/07/how-to-edit-wordpress-design-using-dreamweaver/
Hope this helps :-)
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap -
Development Application Advice
Let's say I have an Access database table with 200 records in
six fields each. We'll call one field "County". I have queries that
list all records by county, and a table of county names. If I wish
to create a web page with a single drop down box that allows a
visitor to select from the table of counties and have the record
set from that county's query displayed, where do I start, Cold
Fusion or DreamweaverIts a case of horses for courses. Both programs can play with
your proposed web page.
If you have both programs then use whichever is most
familiar. I would use Dreamweaver because I don't have Coldfusion.
Depending on your experience, both can have a steep learning curve. -
NFCU Credit Card Application Advice
I'm probably borderline getting approved for a non-secured card, would I have a better chance applying in person at the local branch or online? If I'm not approved for an un-secured card I would like to get the secured card.
If you are waiting for that secured card to graduate it usually takes about 13 months, if your looking to apply for unsecured card wait about 6 months. The 6 months is only if you pay on time every time, have most/ all collection/ bad accounts taken care of, and you should be fine.
-
Hi,
I understand with the version 12 of E-Business Suite ISG and IRep are included with it. With respect to that, it will be great if someone in the B2B space can confirm if:
1. The following interaces are avaliable in iRep and ISG to be service enabled? What product/component dependency do they have?
- Purchasing Headers Open Interface ECERRQI
- OUT: Purchase Order (850/ORDERS) ECEPOO
- OUT: Application Advice (824/APERAK) ECEADVO
- IN: Ship Notice/Manifest (856/DESADV) ECASNI
- IN: Invoice (810/INVOIC) ECEINI
- OUT: Purchase Order Change (860/ORDCHG) ECEPOCO
2. Will the above Open Interfaces load/produce the respective UN/EDIFACT documents mentioned OOTB? Or Is there a seperate EDI translator required?
Appreciate any additional information/document/links on transacting EDIFACT documents with E-business suite.
Thanks in advance.This is Oracle B2B forum and we can only advise on B2B product's capability. Better raise a thread in EBiz forum for EBiz related questions -
Technology - General Discussion
Regards,
Anuj -
Oracle ecoomerce gateway 850 PO outbound rocess no records
I run the program OUT: Purchase Order (850/ORDERS) from eCommerce Gateway reponsibility. It is not generating any file . The log file says Number of record processed = 0
But the po which I entered as a parameter exists. The view 'ECE_POO_HEADERS_V' has 0 records even after setting Org Context. I entered a new PO but still the view has 0 records
What Couold be the reason? Any clues?
---********************Log file *********************************
Program Info: Beginning Outbound Purchase Order (POO) process.
Program Info: Run ID: 477
Output File:==>POO0455.dat
Open Output file
Call Populate Poo Trx procedure
Progress level POOB-10-1760: No HEADER level rows processed for transaction POO.
NUMBER OF RECORDS PROCESSED IS ==>0
Thanks, PradeepPlease see if these MOS Docs help.
How to Troubleshoot ECEINO FaUnable To Transmit Consumption Advice Orders With EDI 850 Outbound Transaction [ID 866260.1]
Compilations of EDI POAO and PCAO Outbound Issues [ID 1268637.1]
Out: Application Advice (824/Aperak) Produces No Data [ID 1090664.1]
Unable To Transmit Consumption Advice Orders With EDI 850 Outbound Transaction [ID 866260.1]
Thanks,
Hussein -
Corresponding IDOC types for 816 and 824 of X12 tranasction
hi
can anyone tell me corresponding IDOC types for the fallowing X12 tranasction(EDI).
816 Organizational relationships
824 Application Advice
regards
mallikarjunHi Malikarjun and Ryan
Please take a look at the following links:
http://www.sapgenie.com/sapedi/ansi.htm
http://www.sapgenie.com/sapedi/mapping.htm
Hope this will help.
Regards,
Ferry Lianto -
Dear SAP Friends,
I am creating the specifications for EDI 824 Application Advice - Integrated Payables against our EDI 820 flat file send to bank for making payments through Checks, ACH and Wires.
Against our EDI 820 flat file bank will send us back EDI 824 flat file for the rejected payments.
I have to create a mapping method of EDI 824, and send to ABAPer to create a program for it. So that after uploading it in SAP it will make the readable file about what payments were rejected.
Does anyone have this kind of mapping document for EDI 824 format.
Thanks & Regards,
PaulHi Paul,
Didn't get enough info on it, but I think these two links will somehow help you:
http://www.ediinformation.com/edi/edi.php
http://www.loweslink.com/llmain/pubdocuments/824FAQ.pdf
Reward if helpful. *
Regards,
Subhasha Ranjan -
Dear SAP Friends,
I am creating the specifications for EDI 824 Application Advice - Integrated Payables against our EDI 820 flat file send to bank for making payments through Checks, ACH and Wires.
Against our EDI 820 flat file bank will send us back EDI 824 flat file for the rejected payments.
I have to create a mapping method of EDI 824, and send to ABAPer to create a program for it. So that after uploading it in SAP it will make the readable file about what payments were rejected.
Does anyone have this kind of mapping document for EDI 824 format.
Thanks & Regards,
PaulHi,
Please check this links perhaps they may help.
http://www.erpgenie.com/sap/sapedi/templates/TXTRAW%20824%20map.xls
http://www.cn.ca/PDF/edi_824_implementation_guide.pdf
Regards,
Ferry Lianto -
RMI of EJB Problem Sun Application Server 8
I have an application that tries to invoke a remote ejb. If the client is on the same box as the ejb then everything works as expected. If the client makes the call from a different application server, then the errors listed below are generated CONTINIOUSLY UNTIL THE CLIENT APP SERVER IS STOPPED.
Although I specify a hostname and port of the desired server, the error in the server log displays the hostname as localhost (which is incorrect, with the correct port) :
locahhost:hostname: 127.0.0.1; port: 33702.
I know that client is communicating with the app server where the ejb reside because the other log messages show the other iiop ports of the ejb app server:
Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.0.1; port: 33702"
Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.0.1; port: 33822"
Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.0.1; port: 33922"
I use the following code to point the remote server:port:
env.put("java.naming.factory.initial", "com.sun.jndi.cosnaming.CNCtxFactory");
env.put("java.naming.provider.url", urlString);
The value of the urlString is extracted from a properties file and
contains the server and the port information.
GENERATED ERRORS:
[#|2007-02-15T12:22:53.995-0500|WARNING|sun-appserver-pe8.2|javax.enterprise.resource.corba.ee._DEFAULT_.rpc.transport|_ThreadID=11;|"IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 127.0.0.1; port: 33702"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2257)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2278)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:208)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:221)
at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:104)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:146)
at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
at org.omg.CosNaming._NamingContextExtStub.resolve(_NamingContextExtStub.java:397)
at com.sun.jndi.cosnaming.CNCtx.callResolve(CNCtx.java:440)
at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:492)
at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:470)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at cyberCash.VerisignDriver.lookupRemoteVerisignAgentBean(VerisignDriver.java:779)
at cyberCash.VerisignDriver.createVerisignRemote(VerisignDriver.java:609)
at cyberCash.VerisignDriver.getVerisignRemote(VerisignDriver.java:579)
at cyberCash.VerisignDriver.SaveInput(VerisignDriver.java:232)
at org.apache.jsp.jsp.ePayment.verisignresults_jsp._jspService(verisignresults_jsp.java:143)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
Caused by: java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:464)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at com.sun.corba.ee.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:63)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:191)
... 52 more
|#]hi
I am working with Sun java application Server 8.
I can able to create application(*.ear),
(Enterprise Java Bean) bean component,
client application
Problem is, i am unable to provide JNDI name for client application
advice needed to provide JNDI name for the client applications
i dont know whats the use of pointbase/cloudscape
(As i am new to this sjaServer 8, i need your advice)
Response to the following mail id
[email protected]
Please do the favour
thank you
Maybe you are looking for
-
Airport Utility not recognizing Time Capsule after Airport Extreme Update08
After installing the Airport Extreme Update 2008 my Time Capsule keeps crashing. I have powered down both my DSL modem and the Time Capsule, done a hard reset of the Time Capsule and yet it continues to flash amber lights. Yesterday, after hours of r
-
Hello Community! I am working with SharePoint 2013 and I built a farm inside the firewall. Then a decision was made to move the two WFE's to the DMZ. Since that time, whenever I try to access the site collections, I get the error below. Other info
-
Hi I've noticed that this has been discussed almost 2 years ago - has anything been done about it? http://discussions.apple.com/thread.jspa?messageID=5889735 I'm finding the reading of scanned images a real pain on preview because the images become s
-
IMac not waking up from sleep after 10.6.6 combo update
Prior to update everything working fine, permissions repaired, file structures sound, no issues. After update, iMac won't wake up properly from sleep. Moving mouse (either Bluetooth or wired) has no reaction. Hitting key on keyboard (Apple aluminum e
-
Inserting regions , zip codes for a country
Hi, I am looking for a solution to insert regions for a country. Say from spro->general settings -> set countries -> insert regions , the new entries for a region of a country is possible , but we have to enter one by one. Is there any other way to i