Application deployment - hide all system contrainer

HI All
wondering if you could help me, I am on a client site and we are sorting some security roles for their helpdesk staff
I have already managed to create an "import computer" roll to hide the all systems collection which is fine.
However no matter what combination of settings I use I can't seem to do the same for System collections for application deployment
Requirements are quite simple, allow a specific group of users the ability to deploy applications to these collections only.
I just can't seem hide the default containers
Any ideas, any help welcome
Regards
Chris

What do you means by "I just can't seem hide the default containers". The default collections
You will need to use RBAC and scope it to your deployment collection.
If you still sees the "All Systems" collection, it's probably because of your limiting collections. If your deployments collections are limited to "All
Systems" you will see "All Systems".
Here's a blog post that describe it : (although it's for OSD, the concept apply in your case)
http://blogs.technet.com/b/chandanbharti/archive/2013/10/16/restricting-user-to-import-computer-information-and-deploy-os-to-a-collection.aspx
Benoit Lecours | Blog: System Center Dudes

Similar Messages

Why does "Hide all Applications" not hide all applications?

Currently, when I invoke the "Hide all Applications" action, it leaves some apps visible. This happens all the time with Safari if it is open. This is clearly a bug -- is there a workaround for it?

found this link a helpful workaround! (hint: use Option key when selecting apps and it closes them off desktop so you're left only with the one app window you want - not all of them)
http://discussions.apple.com/thread.jspa?messageID=3517319&#3517319

Get all system messages

Hello Everybody,
Well, I need to do an application to get all system messages and filter the messages I will need. The application run lotusscript codes from a Notes database, the application just do a database instance, choose the lotus agent and run it. What I need is get all those messages that will come from the lotus agent. I done a piece of the code to redirect all System messages for a file:
printStream = new PrintStream( new BufferedOutputStream( new FileOutputStream("OutFile.txt") ), true );
System.setOut( printStream );
System.setErr( printStream );The messages from lotus agent continue goes to console.By the way, this code can not get the messages from lotus agent, I guess with JMS I can intercept these message. My doubt is: Can I do it with JMS? If so, Could you advise me, please?

Don't bash csh!LOL!I'm glad some people like puns. Some of my friends do, some can't stand them!
I don't know ksh. Our target system uses it--makes me type a lot, because I don't know how to use ksh
history as well as I can use csh history. That's just setup though--must of it runs as a GUI.I don't like ksh either. Never had much luck with its history.
I use bash and zsh. Both have csh-like history, plus arrow key command recall.I don't think I've used either. I don't even think we have them on our system [from a quick check] (not sure I'ved heard of zsh before). I used to use tcsh (which had arrow key command recall) in college, but then some of my jobs didn't have it, so I learned csh history, and can do quite a lot. Confuses some people, but is really quite easy once you get the hang of it. The system administrator at my first job did all sorts of things with sed/awk/nawk/etc.--drove everyone nuts, because no one knew what he was doing. I can do basic sed, and can use awk/nawk if I read the man page.
Considering all the C programming I've done, you'd think I'd like the csh family more, but for some
reason I ended up gravitating toward bash and the more I used it, the more I didn't want to switch to csh.Yeah--I stuck with what I learned first, since it does the job. I don't do shell script programming much, so I don't need to know too many gory details of that. I can do the "foreach" on the command line. I learned vi well in college, so I later never felt like learning emacs (even a console version). So, I do everything in vi now. I push a few extra escape and append characters sometimes if I have to write an MS Word document, but I like vi for my code editing. I tried typing Dvorak for a while when my job was writing requirements in MS Word. It worked well on my split keyboard, but couldn't adjust to a flat keyboard I got stuck with for a while. And vi and Dvorak just don't mix...so I'm back to QWERTY.

SCCM 2012 application deployment installs on all systems regardless of specified count

Hi,
As the application is being deployed, the "Devices with Application" under Application Statistics is showing 723, when in fact only 10 systems have been added through Direct Rule. Under Deployment Status it reflects the right amount (Already Compliant
- 3 Assets; Success - 7 Assets).
Does anybody have any idea why it is slowly (over the period of 5 days now) it keeps installing the application on all systems (there are total of 1,500 systems)? Also the same application was used through task sequence, but I don't believe it is possible
to clone 723 computers over period of five days). Also, under the Supersedence tab has been set to upgrade old versions.
Checking with query shows that all 723 have been deployed.
Thanks,
Waldis

Hi,
Have you resolved this problem? As Jörgen said, you need to remove the old version application deployments.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How can I deploy JBI Application in Sun Java System Application Server 9?

I developed a demo "Loan Processing Composite Application " in Netbeans.org(http://www.netbeans.org/kb/55/loanprocessing.html).
The guide only show the deployment using Netbeans6.Now I want to deploy it directly using Server9 , how can I do?
How to deploy a soa application in Sun Java System Application Server 9? Is there any doc?
Please~~I'm puzzled.

To deploy a JBI application to Sun's App Server, you will need a JBI compliant ESB installed. OpenESB would be my first choice here. Then as far as installing your components without Netbeans, there are two choices. 1) Copy your SA's to the JBI/ESB autodeploy directory and you binding components and service engines to the JBI/ESB autoinstall directory. 2) Use the ant tasks that the JBI specification (http://jcp.org/en/jsr/detail?id=208) requires for all JBI implementations. OpenESB's JBI tasks are detailed here: http://wiki.open-esb.java.net/Wiki.jsp?page=JBIAntTaskReference. These ant tasks can be wrapped with maven goals if needed.
Jeff

SCCM 2012 use PowerShell to create a GlobalCondition, limiting the Deployment Type of an Application to certain operating systems.

Title says it all basically.
In the GUI im able to create a Global Condition (condition type: Expression) where I can add a clause that Limits the deployment type of an application to certain operating Systems (useful for deploying 64-bit apps).
Is there away to Trigger that Setting using PowerShell? So far I haven't found one.
Thx in advance...

I changed my script a little bit and can be found Here.
An example to use it is:
#Get Application named "Test" from the Server "localhost"
$app = Get-SCCMApplication "Test" "localhost"
#A rule will be created from the global condition rule "ForumTest" where the registry value equals to "1"
$rule1 = Create-SCCMGlobalConditionsRule . "ForumTest" "IsEquals" 1 "Registry"
#Add the rule to the requirement rule of the deployment type
$app.DeploymentTypes[0].Requirements.Add($rule1)
#And save the application
Save-SCCMApplication $app
PowerShell, System Center 2012, Windows 8 http://blog.lechar.nl
Thanks Rob!
Have unfortunately encountered some problems:
Get-SCCMApplication does not exist. Changed it to Get-CMApplication
Create-SCCMGlobalConditionsRule - Cant find any "Create..." cmdlets
Save-SCCMApplication does not exist
Get-CMApplication : A positional parameter cannot be found that accepts argument 'TestApp'.
At H:\sctipt\SetRequirement.ps1:2 char:9
+ $app = Get-CMApplication "TestApp" "siteServe ...
+         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (:) [Get-CMApplication], ParameterBindingException
    + FullyQualifiedErrorId : PositionalParameterNotFound,Microsoft.ConfigurationManagement.Cmdlets.AppMan.Commands.GetApplicationCommand
Create-CMGlobalConditionsRule : The term 'Create-CMGlobalConditionsRule' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At H:\script\SetRequirement.ps1:5 char:11
+ $rule1 = Create-CMGlobalConditionsRule . "GlobalRuleName" "IsEquals" 1 "Registry"
+           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (Create-CMGlobalConditionsRule:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
Cannot index into a null array.
At H:\script\SetRequirement.ps1:8 char:2
+ $app.DeploymentTypes[0].Requirements.Add($rule1)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
    + FullyQualifiedErrorId : NullArray
Save-CMApplication : The term 'Save-CMApplication' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the na
me, or if a path was included, verify that the path is correct and try again.
At H:\script\SetRequirement.ps1:12 char:1
+ Save-CMApplication $app
+ ~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (Save-CMApplication:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

Hide all opened jframes / Minimize to system tray

can u all help me by telling
either
1) how to minimize an application and send it to the system tray without showing on the task bar
or
2) how to show / hide all the JFrame that are currently opened

What you seek to achieve is simple if you use the features provided in JDK 6. You need to call the setExtendedState( ) method on your JFrame using the MINIMIZE option and then call setVisible(false) on the frame to remove it from the taskbar.
The next step is to use the SystemTray, TrayIcon, PopupMenu classes found the java.awt.* package to create your own SystemTray Icon and show this in the system tray. This not very hard to do. So upgrade your JDK to version 6 if you already haven't and take a wack at it. Post back here if you have any problems
Note: you can enclose all this activity in a WindowListener to make it automated.
ICE

Powershell script to Add global condition (of OS Requirement) to ALL application deployment types

Looking for an automated way via Powershell to Add global condition (of OS Requirement) to ALL application deployment types.
We currently have over 300+ Applications in SCCM and looking for an automated way of adding a global condition where OS requirement is equal to Windows 7 instead of the default of Any OS.
a

Hi,
Here is a Adam Meltzer's blog about how to create an Application with a requirement rule pointing to a global condition. You could have a look.
http://blogs.msdn.com/b/ameltzer/archive/2012/10/23/how-to-create-an-application-with-a-requirement-rule-pointing-to-a-global-condition.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can I remove all but the last "Mac OS X Server certificate management" application password from my System Keychain?

I am slowly nursing a broken Montain Lion Server back to health. The problems started with a name change days ago then went sour, probably because of some stuff in the keychain that tripped the commands up.
I have now a trusted Root CA in my System Keychain which has signed my wildcard Certificate for my domain and all my services are protected by this wildcard certificate. Creating and installing that certificate helped me back (slowly) but there are still problems to solve
I also have set the com.apple.servermgrd identity preference to this (now trusted) wildcard certificate a few minutes ago
I am busy cleaning as much as possibe of junk from my Keychains to improve stability, of course without damaging things (I hope)
There are 19 "Mac OS X Server certificate management" application passwords in my System Keychain.
12 are from 9 days ago when I installed this clean OS X Mountain Lion Server for the first time, created within a minute during server install.
1 from 6 minutes later, maybe when I turned on a Service
2 are from that day, but 2 and 3 hours later (also probably because of something I did in Server.app, like enabling a service)
1 from 2 days later (probably when I tried to change the server name/domain)
1 from again 5 days later (probably when I tried to change the server name/domain again)
1 from yesterday, when I changed the servername
1 from today, when I changed the server name again.
What are these application passwords for and can I safely remove all but the last one? What are they for?

I went ahead and remove them a month ago. So far, there don't seem to be any issues. As long as you double-triple-check that the hash-number in those "Mac OS X Server certificate management" keychains _aren't_ in the filename of any of the *.pem files in the /etc/certificates folder, you can delete those orphan keychains.

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search by operating system (if this is even possible).

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search on the App Store by operating system (if this is even possible). I currently have a MacBook running OS10.6.8. If you can recommend an app, please post the URL. Would appreciate any helpful suggestions....
<Email Edited By Host>

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

In all Systems( DEV , qualituy and Production ) Application data is same?

Hi SDN team , need clarification from experts.
Thanks alot for giving me advise to resolve my issues. .Need another clarification also from experts.
SAP_EXPA(SAP_ALL with cross-client customizing) , can be selected if I want to transport to a New system( no clients available) ..Am I right?
1) using SAP_ALL , i think user'data and roles alos will be copied ..Am I right?
2) Document says SAP_CUST (Client-specific customizing including authorization profile is copied. The application data is deleted, the user data is retained.)
here I have a question like
a) what authorization profile will be copied , is it user specific?
b) What exactly the meaning of "Application Data is deleted " I hope in all Systems( DEV , qualituy and Production ) there is same Application data maintained. Pls correct me if I am wrong.
Thanks in advance
Regards
Rajani

Hi Rajani,
Below are the answers to your queries:
1) SAP_EXPA(SAP_ALL with cross-client customizing) , can be selected if I want to transport to a New system( no clients available) ..Am I right?
Ans YES (infact it has to be a new system only otherwise Client-independent data and thus all clients in the target system are affected by this and can be destroyed! )
2) using SAP_ALL , i think user'data and roles alos will be copied ..Am I right?
Ans YES
3) Document says SAP_CUST (Client-specific customizing including authorization profile is copied. The application data is deleted, the user data is retained.
here I have a question like
a) what authorization profile will be copied , is it user specific?
Ans YES ( User Master Reacords are deleted)
b) What exactly the meaning of "Application Data is deleted " I hope in all Systems( DEV , qualituy and Production ) there is same Application data maintained. Pls correct me if I am wrong.
ANS:
Application data is dependent upon Customizing data. Therefore, the data can only exist consistently together with it. Application data is always deleted in target clients, with the exception of a copy with SAP_USR or SAP_USER.
Hope this is useful
Regards
Umesh

Hide all applications

Hello there. Someone I know is having a hard transition from OS9 to OSX. Is there a keyboard command on OSX to hide all open windows and show the desktop? Is there a program that puts that application switcher thing from OS9 in the menu bar, in OSX? Any info that would ease the transition is appreciated. Thanks

977/3423
Yes,
using Exposé you can show the desktop the F11 way (or set hot corners for the mouse).
You can also switch between application windows, or all applications windows: play with the F9 and F10 options followed by Tab.
You can also use Application Switcher to toggle between all open apps:
Command-Tab (keep Command down then Tab-Tab-Tab or `-`-`).
Hide All:
you can only "Hide Others", using the usual Option-Command-H shortcut, or by Option-holdclicking the Finder icon in the Dock.
By the way, you can combine mousing with the F keys too.
Enjoy your Mac!
Axl

Does Cmd+H not hide all applications in Yosemite?

When I press Cmd+H to hide each open app, it works as expected until I get to the last visible app. Instead of the last app being hidden and showing my desktop, pressing Cmd+H will either toggle (hide/unhide) between the last two apps, or not hide the last app at all.
Is anyone else seeing this behavior? Is it possible to restore the Mavericks behavior where I can simply hide all the apps to eventually see the desktop? (Note - this is different than Mission Control's Show Desktop)
Thanks in advance for any info!

found this link a helpful workaround! (hint: use Option key when selecting apps and it closes them off desktop so you're left only with the one app window you want - not all of them)
http://discussions.apple.com/thread.jspa?messageID=3517319&#3517319

Application deployment on WebLogic 10.3.2

I am trying to understand the best practice to deploy web applications on WebLogic 10.3.2. Is it recommended have a managed server for each and every deployment or can we have multiple deployments under one managed server. Will there be any performance issues when multiple deployments are running on one managed server? Also can we have each deployment on one managed server listen on common http port?
Please advice.

**Is it recommended have a managed server for each and every deployment or can we have multiple deployments under one managed server.
--You can deploy multiple applications of one single managed server.
**Will there be any performance issues when multiple deployments are running on one managed server?
--There will not be performance issue as such; however you have to make sure that the system and server configurations meets the requirements.
--WebLogic Server allows you to configure a work manager where you define the rules and constraints for your application to boost the performance.
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/config_wls/self_tuned.html
**Also can we have each deployment on one managed server listen on common http port?
--Just to make sure if I understood correctly, did you mean one deployment per managed server listen on same http port?
--If yes, each managed server will have its own unique http port. So application deployed on that will be using a port associated with that managed server.
--In case if you want all the applications to use a same IP/Port, you can use proxy which will route the requests to these applications deployed on different managed servers.
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/plugins/overview.html

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

Application deployment - hide all system contrainer

Similar Messages

Maybe you are looking for