Application does not run on target system
Hello, This is my first attempt at using this forum & creating a LV standalone application and I have encountered a brick wall.
I have created a simple VI to display some T/C readings that runs fine on the (LV prof 8.5) development system, but not on a different target PC.
The target PC does not have LV installed, just DAQ-MX software for Windows V8.6
The DAQ hardware is a SCXI-1000 chassis with SCXI-1600 USB interface, taking data with SCXI 1102. I am using the same hardware on both
the development PC and the target PC. The DAQ hardware works correctly on the target PC (using MAX). My application loads, but just does
not run on the target pc.
Solved!
Go to Solution.
Hello André
I am not sure. On my last attempt, I had included "additional installers" Run-Time Engine(s) 8.0.1, 8.2.1, and 8.5.1.
The application seems to load. The screen looks normal, it just doesn't seem to acquire any data (although it appears to be running).
The VI is very simple. I have attached it (didn't realize I could do this before). I hope this answers your questions.
Thanks,
Bob
Attachments:
thermo2.vi 250 KB
Similar Messages
-
Term of payment does not exist in target system
Hi Gurus,
Scenario: Classic, Self service procurment.
I made a shopping cart with my requirements.
PR and PO created in the backend system.
Posted the GR in SRM....and got the message of posted in the backend.
Posted the invoice in the SRM and message creation completed and found that it has not been posted in the backend (checked the PO history).
The message found in SRM SLG1...."Term of payment does not exist in target system" for that.
Checked the vendor conditions and found that terms of payment exist in the backend system for that vendor.
What could be the problem and how to resolve this issue?
Thanks in advance
SG
Message was edited by:
SRMGUYHi,
I am new to SRM.
We have created new payment term in ECC and replicated to SRM using BBP_UPLOAD_PAYMENT_TERMS. We are able to see in table BBP_PAYTERM and BBP_PAYMENT_TEXT.
But the non of the payment terms are reflecting into PO in SRM after this.
I am able to see the payment term in backend in BBP_PD. I am getting the below warning message when I click on Check Button.
'Term of payment does not exist in the target system'.
What could be the problem and how to resolve it?
Thanks in advance.
Best Regards,
Siddappa -
MacBook Address Book Application Does Not Run
MacBook OSX 10.5.8 - Address Book application will not run - it shows up in Applications Folder but will not run - either double click or command File - Open. I have reinstalled the Address Book application with the original installation disk, which indicated the application was installed, still will not run. Rebooted, reinstalled again - same result -- the Applications Folder shows the file size as 1.4 Mb - updated today - the installation disk showed approx. 53 Mb was being installed - not sure if the Application Directory is only showing a command file or what - also ran the hardware diagnostic and found no problems. Software update shows current software is up to date.
Haven't used Address Book so do not know if it ever worked. Need it now to sync with IPhone 4. Any Ideas?rjackjr,
After reinstalling an Apple application from the installation disk, it is also necessary to reinstall the latest Combo Update for the installed system. In your case that would be Mac OS X 10.5.8 Combo Update.
Try that and see what happens with your Address Book application. -
I have recently upgraded my development PC to Labview 8, RT and FPGA. This comes with DAQmx 8.0.0f0.
I needed to make a new release of an application still running LV7.1 and either DAQmx 7.2 or 7.4. The new build works fine on my PC but running the executeable on the target machine there are many errors associated with DAQmx library files not being compatible. I have checked the file paths in the 7.1 and they all point to the standard labview 7.1\vi.lib\daqmx librarys, and I don't think the vi names have changed.
I don't think it is the application builder as it seems to be the same as always. (7.1)
The target PCs are in factories around Europe and are upgraded by modem link. I have always found it very difficult to upgrade DAQmx remotely and don't try it unless on site.
Quick solution is to build on a 7.1 workstation and run time then works, so the code is OK.
Are there any settings in the application builder or elsewhere that would help?
Has anybody else found problems upgrading to 8? Generally its good, especially with RT and FPGA toolkits.
LucyHi Lucy
As you are now using LabVIEW 8 any executable which includes NI-DAQmx 8 will require LV 8 runtime engine and DAQmx 8. What you can do is build an installer that goes with the executable witch contains the LabVIEW 8 runtime engine (default) and DAQmx 8 selected under additional installers. If you run this before your exe it will update the DAQmx drivers to version 8 and MAX to version 4. You will then be able to run your exe files.
I built an exe and an installer using LabVIEW 8 and ran it on a machine with LabVIEW 7.1. The installer updated every thing easily. The only problem is that as the installer contains DAQmx 8 it is about 460meg which might be a problem as you are doing this remotely the only thing I can suggest is using an FTP server or getting your customers to down load DAQmx 8 of our website
This is the link for NI-DAQmx Version 8.0 for Windows 2000/NT/XP
http://digital.ni.com/softlib.nsf/websearch/4C9E45F6EE5C29F98625708900712CBC?opendocument&node=13206...
Hope this helps
Tim
NI UK AE -
Flex application does not run in Internet Explorer(IE) browser
The IE browser has the required version of the Flash player installed as a Active X control.
Looked at the remoting-config.xml and services-config.xml files, but did not find anything which might prevents the application from running on IE. The application is using Flash remoting services to talk to Coldfusion and fails with a "Send Failed" message.
Where could be the error and how can I start tracing it?
Any advice would be welcome.I had this issue with using https and flex. There is a known issue (that microsoft calls a feature) that prevents IE from caching content (flash files) over https.
If you are using https, try using http to see if it makes a difference. To get it working you need to set some headers in the response.
Thanks,
Vackar -
Java Application does not run in Windows XP
Hi, I have developed a Java Swing application using JRE 1.4.2 and everything works fine under Windows 2000. However, for some Windows XP machines, the application hangs on startup when it tries to show the initial splash screen. No exceptions are thrown and the application must be terminated from the Task Manager.
A workaround seems to be setting the javaw.exe properties so that it runs in "compatibility mode for Windows 2000".
Any ideas?Are you doing any JNI or native calls during start-up? That's my quess.
If you are, must be calling win2000 functions. -
CUA roles sometimes do not match the target system
Hi,
We are using CUA on Solution manager to assign roles to our different systems. Every now and then what is in CUA does not match the target System.
I know that you can look at the idocs using WE05 and see what the root cause was, fix it and then re-assign the role.
The problem is that when you assign the role using CUA, it doesn't warn you that the transmission failed on the target system.
We just went live last week, so I am added and removing roles from many different users using SU01 and SU10 and I do not think it is a valuable use of time to sift through the idoc logs every time I make a change. Especially, since most of the time it works.
Is there a better way to monitor the Idoc logs? Can you have it send a notification (email for example) when there is an error? Is there a better process then WE05?
Thank you in advance for the help!
NeilNeil. It was a long time I played around with CUA. But I am remembering some transaction where you had the logs. Think it is SCUL.
I searched saphelp and got the following hits for you:
http://help.sap.com/saphelp_nw70/helpdata/EN/c1/db4063fd3111d5997a00508b6b8b11/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/cc/50b43be7492354e10000000a114084/frameset.htm
Best of luck to you!
Regards Fredrik -
Ihave installed and run CS5...
I have bought update to CS6...
the update to CS6 does not run!
(I have deleted with special delete tool from Adobe.)
Thank you for helpWhat "does not run"? What system? You need to be a lot more specific.
Mylenium -
Email application does not launch
Hi,
I am using abode reader x, windows 7 & outlook 2010. When I attach a pdf to an email through the abdoe program & press attach, it reads "launching email applciation", but nothing then happens.
Can anyone assist me with this please?
I have already uninstalled and reinstalled and played with the default program settings.
Thoughts?
Thank you.Thank you for responding.
Yes, outlook is running.
Some additional information:
Outlook & Word 2010. Excel 2000. I have a program that I have to use that is not compatible with excel 2010. I have tried to rename the mapi32.dll to mapi32old.dll, but Windows 7 prohibited me from making that change. I have also have tried to use fixmapi.exe, but the application does not run, despite the fact that I have administrator settings.
I had the exact same configuration on my previous computer (which was new, but returned for other reasons) and I was able to email from word & adobe. -
The application does not use the screen and run in the background
Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
private SSGameCanvas gameCanvas ;
private Command exitCommand ;
private Player player = null;
public void startApp() {
try {
// create new game thread
gameCanvas = new SSGameCanvas();
gameCanvas.start(); // start game thread
exitCommand = new Command("Exit",Command.EXIT,1);
gameCanvas.addCommand(exitCommand);
gameCanvas.setCommandListener(this);
Display.getDisplay(this).setCurrent(gameCanvas);
catch (java.io.IOException e)
e.printStackTrace();
try {
// start sounds
InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
player = Manager.createPlayer(in,"audio/x-wav");
player.setLoopCount(1);
player.start();
catch (MediaException ex)
ex.printStackTrace();
catch (IOException ex)
ex.printStackTrace();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
if (player != null) {
player.close();
System.gc();
public void commandAction(Command command, Displayable displayable) {
if (command == exitCommand)
destroyApp(true);
notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
protected GameManager gameManager;
protected boolean running;
private int tick=0;
private static int WIDTH;
private static int HEIGHT;
private int mDelay = 20;
Form mainForm;
Display display;
//private int MaxTime;
public SSGameCanvas() throws IOException{
super(true);
gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
public void start() {
this.running = true;
Thread t = new Thread(this);
t.start();
public void stop() {
running = false;
public void render(Graphics g) {
WIDTH = getWidth();
HEIGHT = getHeight();
// Clear the Canvas.
g.setColor(0, 0, 50);
g.fillRect(0,0,WIDTH-1,HEIGHT-1);
// draw border
g.setColor(200,0,0);
g.drawRect(0,0,WIDTH-1,HEIGHT-1);
// draw game canvas
gameManager.paint(g);
public void run() {
while (running) {
// draw graphics
render(getGraphics());
// advance to next graphics
advance(tick++);
// display
flushGraphics();
try { Thread.sleep(mDelay); }
catch (InterruptedException ie) {}
public void advance(int ticks) {
// advance to next game canvas
gameManager.advance(ticks);
this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PMHi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj -
30:6519:Target application does not exist.
Hello,
I want to delete an existing application, but I'm getting the following error "Target application does not exist" and I can't delete neither deploy.
Do you know what I can do to resolve this issue?
Regards,
RodrigoHello Tod,
I'm talking about EPMA, version 11.1.1.3.
I can see the application in EAS and in the Planning Database.
In the log I'm get the following errors:
java.util.MissingResourceException: Can't find bundle for base name HspImgs, locale pt_PT
java.util.MissingResourceException: Can't find bundle for base name HspCustomImgs, locale pt_PT
java.lang.Exception: APP_NONE_SELECTED
at HspLogOn.Handle(Unknown Source)
at HspLogOn.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
As aditional information this happened after I migrate the application artifcats.
Your help is much appreciated. I don't know what to do.
Regards,
Rodrigo -
I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?
first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox
-
installed CS6 and all working except Photoshop. Says application will not run on this mac despite my having the necessary system requirement of OSX 10.6.8. Can anyone help please?
Hi - I have opened a second log with the same date and name and am now tracking down the problem.
This seems to be the problem for me: Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 -
Application designer does not run
Hi,
I have different version of Application designer on my laptop (win XP pro).
When I double-click on any pside.exe , it does not run. If I copy the same on another Laptop it runs.
Any idea ?
Thank you.Thanks Nicolas,
they have worked well until I imported an exported configuration file.
I restarted my PC , but it did not work neither.
Memory issue ? I don't think so but anyway windows says nothing or it says in a logfile that I can not find. Laptop has 3Gb of RAM.
Are we running only one instance of AppDesigner ? Yes .
Regards.
Maybe you are looking for
-
How to restore Firefox windows after the restore has already been done?
System: Firefox 3.6.16 Windows Vista Business 64-bit Service Pack 2 Core2 Extreme Q9300 4 x 2.53 GHz 8 GB RAM I had 187 Firefox windows open when Firefox crashed. I had restore on. When the window that asks which windows I want to restore appeared, I
-
SAP office messages can't be opened in UWL
Hi, I have installed and tested SONIC (SAP Office Notification Connector). I have a SAP_ALL profile. When I receive a SAP office message, I can either open it in the SBWP or in the UWL notification tab (all my messages show up and I can display its c
-
Can we run external mail program from JSP / Servlet deployed on tomcat
Hi folks, Had a tough time getting JavaMail API to work, finally when things seem to be working there were some issues with the vendor's server, so finally gave up the idea. On the server Apache and Tomcat are integrated via mod_jk and currently I re
-
i just bought the new galaxy nexus yesterday and was browsing around the market but there are waaaayyyy too many apps to see each one so i was wondering if there were some apps that were pretty much a must have?
-
Freezes every time it is open on one of our computers (not all).
Started after Firefox updated on Wednesday.