Application "freezes" on tab or accordion change

Hello,
We have a intranet application with one main tabnavigator,
sub tabnavigators and sometimes accordions within those.
But now and then the whole thing freezes when you change from
one tab to an other or from one accordion to an other and doesn't
show the content of the tab or the navigator, but a white - empty -
screen. And there are no errors generated! Not even with the
debug-player...
Any ideas what could cause this? I know this is a very
unspecific error which could have a thousand reasons, but maybe
someone here had the same problem ...
Best regards,
Frank

Want to refresh this question in the forum.
I'm having a very similar issue, having a multi-application
project where the tabnavigator is used to call other applications
within the project, and occasionally freezes up during navigation,
giving no errors. This did not appear to happen when the project
was a flex 2 built project, but have noticed it since migrating the
project to flex 3.
Frank,
Do you still have this issue, or have you found the
work-round?
Regards,
Graeme.

Similar Messages

How can I prevent the active Tab Group from changing whenever I close a tab?

Simply, often I will close a tab in Firefox 4; then, for some reason the active Tab Group changes to some other collection. It usually happens when I close the last tab in my tabs bar, but it has happened after closing other tabs, as well. Would love to prevent Tab Groups from changing automatically. Thank you!

Hi:
I tried precisely your suggestion before posting my message to the forum yesterday. I just forgot to mention it... Maybe I was afraid of increasing my message length more and more...
I already know that this solution prevents the MediaTracker from blocking. However...
(1) If they reach a troublesome image (like a Targa), the users of my application might not be pleased by its freezing for 10 seconds. Actually, this image loading module is part of an architecture for database applications from which my development team and I produce applications for various customers. Images are used, in particular, in Oracle BLOB support.
(2) If I use a smaller timeout delay, I have no guarantee that any image, whatever its length, will load properly (Targa excluded, of course). According to tests I performed yesterday, I am virtually sure that the 10-second delay will be busted very easily by pictures larger than 1 Mb. I cannot overlook this potential problem: an Oracle BLOB can contain up to 2 terabytes of data!
On the other side, I don't want to focus too much the attention on the JIMI Targa import filter because I know that a revised version of the JIMI and JAI packages will be part of JDK 1.4. This is why I am trying to figure out what is happening in the MediaTracker and Toolkit classes, which are much more fundamental than the Jimi ones...
Thanks anyway...
Best regards,
Jean-Fran�ois Morin

Basic behavior - compile vs. save, application freezes and other questions

Hi all,
I've just recently moved from MS SQL to Oracle and found Oracle SQL Developer the only more or less working application to access the database and write scripts. Still, there are some issues which are beyond me in this application. So what I'd need to know:
1) When I open a package and edit it, what is the difference between hitting CTRL+S (save) and Compile? I just need to change the code, not run the damn script. Run and Debug I suppose would execute the whole package.
2) When I save a package, why does the application freeze? I have no idea what it is doing, but when I kill it the code is not changed.
3) When I connect to packages of a different user why cannot it export the ddl / source code of the whole package?
4) When I am inactive for some time, is there some normal way to reconnect to the connection other than disconnect + connect, which closes all windows I have open on the connection?
5) Why does drag + drop a table name to SQL worksheet sometimes offer me to create a script and sometimes ignores me completely?
6) Is there any way to convince the popups with table/column names to work also with variables and/or to show also data types of columns? Incidentally, is there a way to make it work all the time and not just during favorable moon phases?
Thank you ever so much for answering any but preferably all questions.

1. None
2. Might be a lock - check the Enterprise Manager
3. What is connecting to packages? How are you trying that export?
4. Go vote on http://htmldb.oracle.com/pls/otn/f?p=42626:39:1538555050886906::NO::P39_ID:10421 to add weight for a real reconnect option
5. Script? You mean insert/update/select, right?
6. You mean the completion insight? Note you can force it to show with CTRL-space. If that doesn't work you'll have to be more specific.
Regards,
K.

Excel 2010 Dialog Boxes Hidden behind Application causing application freezing

Recently upgraded to Office 2010 (32bit) /Windows 7. Have hundreds of users that we support and so far most have upgraded. Noticed with some users though - not all - just a small percentage, when they click SaveAs in Excel 2010, the application
freezes. On closer scrutiny we realized what was happening was the SaveAs dialog box was BEHIND the main Excel window. The only way to restore it is to click on the tab from the Taskbar or minimize all the windows to FIND the SaveAs Dialog box.
Understandably this is causing these users stress and inconvenience. It is very unproductive and a nuisance to say the least. The only other variable here is that all these users have multiple monitors, usually 2-4. But for some, this happens
in their main monitor and/or the monitor that Excel is opened in and which has the focus. Even more strange is that this does not occur to everyone, just a handful of users so far who have reported the issue. We have also noted it happens
with other dialog boxes as well, not just the SaveAs so it seems generic in that sense.
The other item with this issue is that it's not persistent. Users have reported it's sporadic and comes and goes.
Is this a bug?
Any feedback greatly appreciated.

On Wed, 14 Dec 2011 20:51:03 +0000, Nootrino wrote:
>
>
>Recently upgraded to Office 2010 (32bit) /Windows 7. Have hundreds of users that we support and so far most have upgraded. Noticed with some users though - not all - just a small percentage, when they click SaveAs in Excel 2010, the application
freezes. On closer scrutiny we realized what was happening was the SaveAs dialog box was BEHIND the main Excel window. The only way to restore it is to click on the tab from the Taskbar or minimize all the windows to FIND the SaveAs Dialog box.
Understandably this is causing these users stress and inconvenience. It is very unproductive and a nuisance to say the least. The only other variable here is that all these users have multiple monitors, usually 2-4. But for some, this happens
in their main monitor and/or the monitor that Excel is opened in and which has the focus. Even more strange is that this does not occur to everyone, just a handful of users so far who have reported the issue. We have also noted it happens with
other
>dialog boxes as well, not just the SaveAs so it seems generic in that sense.
>
>The other item with this issue is that it's not persistent. Users have reported it's sporadic and comes and goes.
>
>Is this a bug?
>
>Any feedback greatly appreciated.
A search using Google reveals that this may be a problem with W7, and was first reported during beta testing!
http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/0bbefdc5-7f20-4b9f-8b24-1be76d6b7996
and for a possible fix, but with some serious caveats:
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/7f4543cf-874d-4a39-bea5-34a824e4c0ce/
Ron

How to switch between 2 windows of the same application using Cmd+Tab

Hi,
I am using my mac now since about 10 months. I was used to work with Linux and Windows XP.
Something I am badly missing on mac os x is the possibility to switch between 2 windows of the same application using cmd + tab just like it simply works for Linux and Windows (and maybe many other OS out there!).
Very often I have 2 text files open in 2 editor windows (e.g. TextEdit) and need to copy and paste text from one window to the other. I was used to simply use ALT+TAB. But here I have to get my right hand away from the keyboard and use the mouse to change the focus from one window to the other and then use the mouse again to get the focus back to the previous TextEdit windows.
THIS REALLY *****!!!! It makes me crazy. I cannot believe that such a "modern" OP does not support this action. I must be doing something completely wrong or did not understand the mac correctly. Right?
Does anyone have an idea how I can get mac to do something all other operating systems so easily do?
Thanks
Quartz84

Hi Kappy,
well what you are saying is obvious to me. This is not the point for me and not what I wanted to know. But I think you answered my question anyway: OS X is unable to switch between windows of the same application as I mentioned in my example.
WHY NOT???
Every other OS is able to differentiate between windows and not just applications.
Another example: The Mail application and an Email editor window. When you are writing an Email and you want to switch to the main window of the Mail application to read something you must again use the mouse!
I mean Apple seems to be "somehow" using FreeBSD in the background and even in FreeBSD's window manager it is possible to switch between windows of the same application.
Well, in the Apple world it is always the pour user who is not intelligent enough to understand Apple's philosophy ;-(
To me this is not modern, it is simply a weakness of the OS.
Cheers
Quartz84

Message application freezing when adding new contact from the messages application

if someone is sending the message with the phone number included in the text, i touch the number and whait till options will pops up, choosing create new contact and ok. then the messages application freezes for a long time... few minutes. have to double press the home button and switch of the message app from the background. So have to start message app again to be able to use it. How to sort this? Its happening more than one year and have changed few phones already.

Snow Leopard and iCloud compatibility is very limited, and it may be that the phone's OS requires iCloud for the syncing:
https://discussions.apple.com/docs/DOC-2551
I would enquire in the iOS forums to find out if there is a way without iCloud now to sync.

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

The application detected an error that prevents changes from being saved.

Hi. I'm having this problem almost all the time when I do some color correction.
"The application detected an error that prevents changes from being saved. To avoid losing your work, quit Final Cut Pro."
Any ideas why this is happening?
I'm on a 2010 Mac Pro running latest Mavericks and latest FCP X.
I already removed FCP X, and all the effects I have installed. But still the issue persists.
Thanks.

That could have happened. I can't remember though.
Is there any work around?
I currently only have 1 open library and 1 event on it. If I move or copy that event into a new library, would that in theory work?
Thanks for the help so far.

Since 2.2.1 upgrade, force quit doesn't work after an application freezes

Sorry if this was posted before, but I couldn't find a post that matched my issue.
Has anyone else noticed that since upgrading to 2.2.1 on the 3G, if an application freezes, force quit doesn't work. I have to do a hard reset inorder to get the OS to respond again. Even tried to just hold the power button to do a power off and it doesn't respond.
Any advice? Tried restoring to 2.2.1 many times didn't help.

Thanks for the response. I have done a many restores as "new iphone" and reinstalled apps. I normally get freezes when I'm in a twitter type application and using the "mini/lite safari browser" within the twitter app.
When the phone doesn't freeze, I can force quit apps at will. It's only after a freeze (when I need force quit the most) does it not work....
I would make a Genius Bar appointment but I can't recreate it at will.

Tab background color changes when saving or downloading (Ubuntu) - bug ?

I'm using Firefox 20.0 on Linux Ubuntu.
When I'm opening and using Firefox, the active tab background is light gray, and the other tabs are black (with white/gray text). But as soon as I have downloaded a file (saving an image for example, or a pdf), the tabs change color: the non active tabs turn gray instead of black, and the tab text is almost unreadable (gray on gray).
I have disabled ALL extensions (including the Ubuntu/Unity extensions) and restarted Firefox, and get the same result. See screenshot with before/after downloading: http://imagesup.net/?di=113687926169
On the other hand, when I start Firefox in safe mode, all is well, the tabs don't change color when downloading or saving a file.
What to do? Could this be a bug ?

Hey, I'm on Ubuntu, too.
It seems like you don't use Ubuntu's default theme, or at least, you have some modifications there, right? Try disabling your customizations to see if it works, I never saw / heard of this problem anywhere.
Also update your Firefox, there are changes that your problem is fixed after updating.
Another suggestion would be hacking about:config, for example, it might be the Download Manager's arrow flashing ( just guessing ), so you might want to disable that and see if something changes.
search 'browser.download.manager' in about:config and play with those configs to see if anything changes.

Why does the Right-click - "t" delete a bookmark on the bookmark toolbar, when Right-click - "t" opens a new tab elsewhere. The bookmark toolbar use Right-click - "w" to open in a new tab. Please change this to "t" to...

Why does the Right-click -> "t" delete a bookmark on the bookmark toolbar, when Right-click -> "t" opens a new tab elsewhere in Firefox. The bookmark toolbar use Right-click -> "w" to open in a new tab. Please change this to "t" to... I keep deleting all my bookmark because you don't make the commands consistent!

If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.<br />
The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).<br />
That only works if you haven't closed Firefox.
[https://bugzilla.mozilla.org/show_bug.cgi?id=301888 Bug 301888] – Bookmarks cut instead of opened in new tab from Bookmarks Toolbar Folder
(please do not comment in bug reports; you can vote instead)

This app tab feature doesn't work for me: "Links to new websites open in a new tab so that your App Tab doesn't change".

I installed the new firefox 4 browser today. In the description about the new app tab the following feature is claimed:
"Links to new websites open in a new tab so that your App Tab doesn't change."
This doesn's seem to work for me. When I click a link in an app tab i just get redirected and my app tab changes. Is this a bug or a setting?

This is what the article here claims you need mobile share plan to work.
It shows it will work fine over wifi.
http://www.ubergizmo.com/2013/03/bbm-video-chat-on-att-will-require-a-mobile-share-plan/

Unable to see Applications under navigate tab in Planning browser

Unable to see Applications under navigate tab in Hyperion(9.3.1) workspace I have installed all Hyperion 9.3.1 products as per installation document
Please Can any one tell me the solution.
i have one more question .already i installed Hyperion Shared Services,Essbase (includes
Essbase Server and Essbase Administration Services),Hyperion Planning - System 9 .Essbase Integration Services,Hyperion Smart View for Office.
i am using Tomcat web server only .
what are the applications need to install if i want to work on planning

Hi,
Have you read this post > Unable to see Applcation under navigate tab in Hyperion(9.3.1) workspace
I answered the same question on the subject only a few days ago.
Hope it works for you.
Cheers
John

Not true: Links to other websites open in a new tab so that your App Tab doesn't change.

In the article "What are App Tabs", there's the following statement:
"Links to other websites open in a new tab so that your App Tab doesn't change." That doesn't happen when I make an App Tab in FF 7.01 in Win 7. I want it to happen, but it doesn't. Sometimes I want to keep Gmail open while I open an link in an email. When I click on the link, I expect a new tab to open, but it doesn't. Instead, the App Tab the contains gmail goes to the linked website. How can I stop this from happening?

*Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

Client application freezes permanently when one user logoff and another user take that session on windows server 2008 r2

Hi,
we have windows server 2008 r2 and In our application there are three server and on e client application.
My client application freezes on a specific scenario.
Steps taken to hang are following:-
1. start client application
2. open an module named by XYZ
3. login to remote machine with another session./ Another user login from their computer.
4. connect with the session which have client application opened.
5. Whenever the session is forcibly taken client application becomes unresponsive.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Application "freezes" on tab or accordion change

Similar Messages

Maybe you are looking for