Application Message

hi all,
i created an appication using bapi's in VC
when i deploy it, an "application message" pop up .message :"an error was returned from backend sys. identify urself" with "ok" button .
once i click ok ,my application is working fine.
how can i avoid that application message when i deploy it?
Regards
kiran
Edited by: kiran_mareedu on Oct 5, 2009 8:25 AM

Hi Kiran,
there might be an issue with your connection to the backend system. I recommend to check the log in the NetWeaver Administrator http://<host>:<port>/nwa (default trace). Have you also tried the connection test in the system configuration?
Best Regards,
Marcel

Similar Messages

Integration Broker Application Messages Issue

Hi Gurus,
We are having an issue with the Integration Broker Application Messages.
Here's the issue, when we run Dynrole it process Application Messages. All messages go to Done status, but checking the instance, the Footer comes first, where the header should comes first. This issue happens from time to time, we only run 8 application messages at a time (header and footer included). BTW, failover is enabled on our server.
We are trying to find a solution on this, please help us.
Thanks,
Red

Hi,
Did it resolved? If yes, please share here if possible.
Cheers,
Elvis.

Difference between Business message and application message

Hi B2B Gurus,
Can you please explain the difference between Business message and application message?
Regards,
Praveen

Hi Praveen,
Business message status reports identify business message instance details for a document protocol. These details include the sending and receiving trading partners, the agreement name, the business action, the business message ID, the status, the exchange protocol and document protocol, and message details.
Application Message Reports provide information related to the SOA Composite—the name, version, and so on, if a back-end composite application sent or received the message.
Regards,
Anuj

Application message help could not be called Message in SABAPDOCU888

Hi,
After the application of the Support Package 21 in the DEV, help is not functioning correctly, for example, in top of word WRITE (in a publisher ABAP), I pressure F1, opens help correctly, from there pressed in Output you the a list and I go until the end of the one in the point of Additional help. In that pressed Creating Lists, returns me the Application message help could not be called (Message in. SABAPDOCU888).
What I must make?
Debtor for the attention
Rogério Aranda

I had the same problem when I installed Firefox 3, but I think the problem is due to my recent hard drive upgrade. Try changing the download location from "Desktop" in Microsoft Internet Explorer and all other browsers (Safari, Firefox, etc.) to whatever default location you prefer. I never use Internet Explorer, but I think somehow my settings were corrupted when I upgraded my hard drive. I found this solution on another site also.

Showing application message with different languages...

Hi guys,
i've a question for you.
I'm trying to add to my jsf application a new language.
I've added a resource bundle and everythings it's ok.
My question is:
if in my bean i've
if (rs.next()) {
                         FacesContext facesContext = FacesContext
                                   .getCurrentInstance();
                         facesContext.addMessage(null, new FacesMessage(
                                   FacesMessage.SEVERITY_ERROR,
                                   "Il laboratorio risulta essere gi� inserito",
                                   "Laboratorio esistente"));
                    }that print a message in a language,how can i this message in the other language(english,for example)?
I have to put also application message into resource bundle?
How can i retrieve them?
Please help me...

thanks very much,
i've changed english as default in th locale but nothing!!!
i retrieve only italian messages...
can you help me to find the error?
When i pass to english mode all outputText messages of application became in english,but application message of bean are in italian,i try to print locale and it is
it
Here is my code of my visit object,it is of session type
package giu;
import java.io.Serializable;
import java.sql.Connection;
import java.sql.Statement;
import java.util.*;
import javax.faces.application.Application;
import javax.faces.context.FacesContext;
import javax.faces.model.SelectItem;
import javax.servlet.http.HttpSessionBindingEvent;
import javax.servlet.http.HttpSessionBindingListener;
import javax.sql.DataSource;
public class Visit implements HttpSessionBindingListener {
     private static final long serialVersionUID = 1L;
      * @uml.property name="user"
      * @uml.associationEnd
     private User user;
      * @uml.property name="localeItems"
     private boolean loggedIn;
     private List localeItems;
     public static Connection conn;
      * @uml.property name="authenticationBean"
      * @uml.associationEnd
     private AuthenticationBean authenticationBean;
     public Visit() {
      * @return Returns the user.
      * @uml.property name="user"
     public User getUser() {
          return user;
      * @param user
      *            The user to set.
      * @uml.property name="user"
     public void setUser(User user) {
          this.user = user;
     public boolean getLoggedIn() {
          return loggedIn;
      * @param user
      *            The user to set.
      * @uml.property name="user"
     public void setLoggedIn(boolean loggedIn) {
          this.loggedIn = loggedIn;
      * @return Returns the authenticationBean.
      * @uml.property name="authenticationBean"
     public AuthenticationBean getAuthenticationBean() {
          return authenticationBean;
      * @param authenticationBean
      *            The authenticationBean to set.
      * @uml.property name="authenticationBean"
     public void setAuthenticationBean(AuthenticationBean authenticationBean) {
          this.authenticationBean = authenticationBean;
     public List getSupportedtLocaleItems()
         if (localeItems == null)
           localeItems = new ArrayList();
           Application app = FacesContext.getCurrentInstance().getApplication();
           for (Iterator i = app.getSupportedLocales(); i.hasNext(); )
             Locale locale = (Locale)i.next();
             SelectItem item = new SelectItem(locale.toString(), locale.getDisplayName());
             localeItems.add(item);
           if (localeItems.size() == 0)
             Locale defaultLocale = app.getDefaultLocale();
             localeItems.add(new SelectItem(defaultLocale.toString(), defaultLocale.getDisplayName()));
         return localeItems;
     public String getLocale()
         return FacesContext.getCurrentInstance().getViewRoot().getLocale().toString();
       public void setLocale(String locale)
         FacesContext.getCurrentInstance().getViewRoot().setLocale(new Locale(locale));
       }and this is the header of my jsf pages
<h:selectOneListbox id="languageSelect" size="1" styleClass="language-select" value="#{visit.locale}">
          <f:selectItems value="#{visit.supportedtLocaleItems}"/>
        </h:selectOneListbox>
        <h:commandButton value="Go!" styleClass="language-select-button"/>and this is my web.xml
<application>
<message-bundle>microarray.bundle.messageResource</message-bundle>
<locale-config>
   <default-locale>it</default-locale>
   <supported-locale>it</supported-locale>
   <supported-locale>en</supported-locale>
</locale-config>
</application>can someone help me?
Thanks

Firefox 5 is apparently incompatible with F-Secure anti-virus; F-Secure repeatedly pops up "Changed Application" messages; How do I restore my previous version of Firefox?

I just installed Firefox 5. Unfortunately, F-Secure's "Application Control" now repeatedly pops up "Changed Application" messages in an endless string. It will not accept my attempts to "Allow" the new version of Firefox. Since Firefox 5 is not compatible with F-Secure, I must return to my previous version of Firefox. I am very disappointed that you have put me to all this trouble. How do I delete Firefox 5 and return to the previous version of Firefox?

"F-Secure repeatedly pops up Changed Application"
So how is this Firefox's fault? Shouldn't you write to F-Secure so they fix that?

My application, messages, can't be opened. Help?

My application, messages, can't be opened. Help?

Okay...I'm sorry for the panic. I finally just re-booted the computer and now the Finder is working.
But, yes, to answer your question, Linc, it was -10810 (I'm typing that from memory, so it may be off by a digit or two???)
Could it be the bug that was mentioned in previous threads? Or, maybe just a fluke?
This was my first time to post a question/problem, so it is nice to know there are folks out there, ready to help.
So kind.
Thanks!
E.

Configuration to disable Resubmission of Application Message

Hi,
When ever i resubmit a wire message, the same instance gets resubmitted with out creating a duplicate instance unless the transaction becomes successful.
But wheb i resubmit any app message, the resubmission creates a new instance all the time even if the tranaction fails in the next try.
We want to avoid the latter scenario. Is there any configuration setting through which we can disable the resubmisson of application message or avoiding the duplication of resubmitted application messages in case of failure.
Thanks,
Naveen Kumar T.

Naveen,
It is working as designed. If you will resubmit an app/wire message then always a new instance will be created with same message id (B2B message id or protocol message id). In case of app message resubmission (outbound) new message will be created with same B2B message id and in case of wire message resubmission (inbound) new message will be created with same protocol message id.
In case of wire message resubmission of outbound, no new entry will be created and similarly in case of app message resubmission of inbound, no new entry will be created.
Regards,
Anuj

Apache Bounce Must for Application Message Changes???

Hi Friends,
Is it necessary to bounce apache and oc4j whenever we need to change the text of an application message that is being used on an OAF page?
Thanks,
Amit

Thanks Ashish.
What I got from that post is that it is mandatory to bounce apache for application message changes to get reflected.
What we are doing is -> String strObligStmt = pageContext.getMessage("APPL_SHORT_NAME", "XX_XX_NAME_OF_MSG", msgToken);
OAFormattedTextBean obligStmtBS = (OAFormattedTextBean)webBean.findIndexedChildRecursive("ObligMsg");
obligStmtBS.setText(strObligStmt);
Another thing I got from that post is that we can read the message text directly from FND_MESSAGES and hence get the latest text at all times. But in that case, we will have to substitute the message tokens manually right?
Actually the whole purpose of application messages is getting defeated here. If we have to bounce apache, it is as tedious as sending a code deployment and the flexibility of having application messages is being compromised.
THIS QUESTION IS STILL OPEN.
Thanks,
Amit

I cannot update adobe cc application, message is always and since a long time "erreur de téléchargement" - réessayez ou contactez le service client

I cannot update adobe cc application, message is always and since a long time "erreur de téléchargement" - réessayez ou contactez le service client
and I didn't see application in the apps windows
what is the way to work simply and to update application ?
applications are on my computer and run well
thanks for your hepl
olivier

sign out and then back in to your cc app.
if that fails, you can update directly, All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools

Oracle Password Security - suppress messages and use an application message

We are implementing Oracle Password Security and I was wondering if the Oracle message can be suppressed?
Reason being, I would like to give an application message based on the return code from Oracle.
Thanks.

Maybe I haven't explained it properly or I'm misunderstanding something but the exception init doesn't seem to be working.
We have set up a security profile and have set the Oracle password security profile parameters:
•     failed_login_attempts
•     password_grace_time
•     password_life_time
•     password_lock_time
•     password_reuse_max
•     password_reuse_time
•     password_verify_function
As we know on connect, Oracle checks the security profile and if a users P/W will be expiring, Oracle prompts an internal message to the user, error code ORA-28002. Is there a way to suppress the internal Oracle message and somehow capture the error code?
Thanks

Ipod being Used by another application message

Dear All,
I sometimes get a message that my ipod will not disconnect because it is being used by another application but I can't figure out which aplication is using it. How do I figure this out? Thanks for the help.

Dear All,
I sometimes get a message that my ipod will not
disconnect because it is being used by another
application but I can't figure out which aplication
is using it. How do I figure this out? Thanks for
the help.
I'm having the same problem. Did you ever figure this out?

The page won,t open I get the settings were changed by another application message. It keeps appearing to I can't work with the diagnosics

The page won't open when I click on the firefox icon I go to system preferences for dianostics and "the settings have been changed by another application" I can't close that message to keep on working.

Are you referring to a wireless router, such as an Airport Express? If so, and you bought a different router, you will need to set up the new router according to their instructions. With my Netgear, I had to go to their online website (they should have the URL listed in the instructions) and set it up there because the software that comes with routers is not compatible with Macs.
If you're talking about something else, then please let me know - I've just never heard of an Airport modem.

"not a valid Win32 application" message when trying to install iTunes 7.0

I have downloaded the new iTunes 7.0 setup file. When I click on the icon on my desktop, I get the message, " C:____\iTunesSetup.exe is not a valid Win32 application".
This problem doesn't seem to be specifically addressed in the troubleshooting suggestions on this website. Does any one have any suggestions on what I can do to resolve this problem? I've tried uninstalling older versions of iTunes and Quicktime, and re-downloaded new software package, but problem continues.

After using the Windows Installer clean up tool and removing the iTunes 7.0.7.16 install file I was able to update to 7.0.2

Application messages are in the system log instead of the application log

Hi SAP GURUS.
The standard output is created from the outbound delivery .
All the messages are hitting the system log instead of the application log .
This is after the upgrade from 4.6c to ECC 6.0 .
Please provide the details how to move the log to the application log since the output is the standard output (SAP provided output type ).

verzunof wrote:
Hello,
My system.log is filled with these messages, they repeat every second.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
Do these messages indicate a problem? If so what that could be problem and the solution?
Can this contribute to the sleep/wakeup problem when iMac won't wakeup after being put to sleep manually and not sleeping according to Power Saving settings?
Thanks a lot.
verzunof wrote:
I'm not certain if those messages indicate a power issue but you can try *resetting the System Management Controller* and see if that helps. Here's how: http://support.apple.com/kb/HT1806
"The System Management Controller (SMC) is a chip on the logic board that controls all power functions for your computer. If your computer is experiencing any power issue, resetting the SMC may resolve it. The SMC controls several functions, including:
Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
Handling system resets from various commands.
Controlling the fans."
Carolyn

Application Message

Similar Messages

Maybe you are looking for