Application running slowly under Hyper-V (factor of 100 times slower)

I have an application running in a non virtual Windows Server 2008R2/SP1 environment. It processes about 60,000 records from an indexed file (about 20MB in length) in about a second running in that environment. I want to move the application
to a Hyper-V virtual server also running Windows Server 2008R2/SP1. When I do so, the application runs, but processing the same file takes almost 2 minutes.
The application is the only thing running in the virtual machine and the virtual machine is the only VM running on the physical box. The VM is configured with a single processor, 2048M of fixed (not dynamic) memory and a fixed size disk of 255GB.
There is no network traffic so the single network connection is not used. The physical machine is a quad core with 8GB of memory and two 1TB drives that are less than 1/4 used in each case.
Now for the weird part. The application runs from the command line. If I start it and do nothing else, it takes about 2 minutes to complete its process. But, if I start the application, switch focus to another window on the virtual
machine then switch back, the process completes immediately upon switching back to the command line window.
Any thoughts?

The VM is configured with a single processor - The physical machine is a quad core
Do you mean the physical machine that was running the application has a quad core processor? If not, what did the physical machine running the application actually have? Is the application multithreaded so that it can make use of multiple processors?
Did the application in the physical world have OS and data on the same disk or on different disks? Did you run this application shortly after you started the VM, or did you let the system quiesce a bit? Did you measure performance on the physical
under the same sort of conditions? Are you running from a cmd window or PowerShell? (Your comment about clicking away and coming back brings to mind things I've seen with PowerShell) Does it run quickly on a second instantiation, or does
it run poorly every instantiation?
Determining performance requires a lot more information than what you provided.
I always assign at least two virtual CPUs to any Windows Server VMs. There are enough system processes running on the box that two processors will almost always benefit the workload. Also, it it not uncommon that the first run of an application
shortly after a machine has started will never perform as it will after a machine has settled in. This is why every benchmark worth its salt will start the benchmark and let it run for a few minutes before they actually start measuring.
.:|:.:|:. tim

Similar Messages

Satellite L855-188 runs slowly - some apps stop working for a time

Hello,
I bought this laptop a week ago as an upgrade from the dell studio 1558 and it is more powerful spec wise and i will admit windows 8 does make things a little strange but i am having issues with the laptop:
The laptop sometimes runs slowly and certain applications such as chrome and steam and skype just stop working for a time, and sometimes require the applications to be reset before they will work again and chrome has now developed a bug that only lets it open if i right click on it and tell it to open a new window
The wireless will randomly drop, and will no longer open the connections window, the devices show it as being active, but can neither enable it or disable it or find wireless connections or even open the menu to find connections this can only be solved by a system restart.... i have updated the drivers for the wireless to the newest for the Atheros card
It will not restart, shut-down or sleep, when asked to do so the screen will go dark, sound like its preparing to shut down and say with the screen darkened hanging in the about to shut down state until it either cuts its own power or i hold the power button to force it to turn off,
I have updated the drivers available on the Toshiba website as all the AMD drivers say they are incompatible
Help would be appreciated, I don't want to send this back or have to try reverting to windows 7 or something drastic

>Francesco_1: I dont have that many programs running, skype, steam, chrome, panda internet security, iobits advanced system care and sticky notes, nothing too stressing at all, and my dell with literally half the spec of this laptop handelled it all fine
You said always: sometimes
In my opinion if there would be an hardware problem, the notebook would run always slowly and not sometimes
However, as I recommended above: try the option Reset your PC. This would returns Windows 8 to its original state.
By the way: a good tip to improve the notebook performance is the change from HDD to SSD drive.
I did it on my notebook and guess what: its great! Its much faster as the HDD.
From my point of view, HDD is the past... SSD drive are now and future. You could exchange the HDD with an SSD drive and could use the HDD as an "backup" medium.

Applications run slowly and quit when printing on a G5

I recently migrated applications, documents, and accounts from a G4 to a G5., both running OS X Tiger 10.4.9. Since migrating, many times a day there have been problems with it.
Applications (mostly FileMaker and Microsoft Word 2004) run a little more slowly than they should. Of more concern is how these applications will unexpectedly quit when printing. They will quit just before the print dialogue box is supposed to appear. It doesn't happen every time, but it shouldn't be happening at all. The printers used are all shared printers but not postscript-based printers.
I've tried a number of things (deleting the printers and adding them again, repaired permissions, updated software, deleted corrupt fonts, uninstalled MS Office & reinstalled, zapped PRAM) and nothing has helped.
I thought I'd ask here for any suggestions (since this looks like it might be a common enough problem) before I resort to reinstalling everything! Thanks!

Reinstall if deleting .plist files doesn't help. Seems that crashing on launch is common enough after the recent update http://www.macfixit.com
Backup. And whenever you do a clean install, back that up there and then, sparseimage works fine, and keep it handy if you need to restore.
I'd run First Aid and Disk Warrior.
I thought my printing problems began with the Security Update 2007-004 and went back to earlier image. Have not yet reapplied to test whether it would or not.
After spending a couple full morning trying various fixes, a restore or reinstall did the trick. I'd suggest the same.

Why is Elements 11 running slowly under Windows 8?

I got a new pc with Windows 8. All the specs are better than my old one. But PSE 11 runs MUCH slower than on the old one. Costco Support suggested I look for an update to PSE 11 to run under Windows 8. My PSE is ver 11.0.0.0 but it says it is up to date. Any suggestions?

The Wacom drivers were up to date but the graphics card did need a new update and that really helped a lot. I also turned off the Win 7 "ripple effect" that is standard with the Wacom. It was annoying and I think it also caused a little slow down.
Thank you!

Applications load slowly on imac after Mavericks clean install

After a clean install of Mavericks, my late 2009 imac runs more slowly compared to how it ran under Snow Leopard. Applications like "Settings" take a few seconds to load, whereas under snow leopard, the application would load almost instantly. The Novabench score now is around 771, and matches about what I measured after the clean Mavericks install, but appears low compared to scores for similarly configured systems running Snow Leopard. The system is quite usable, especially if applications are left open, just slower. Is it possible to identify from Etrecheck a possible explanation? Is this level of degradation of performance expected when upgrading an old system? Thank you for your help.
Problem description:
Applications load slowly. Late 2009 iMac runs slowly under Mavericks compared to Snow Leopard.
EtreCheck version: 2.1.2 (105)
Report generated December 13, 2014 at 11:48:21 PM PST
Hardware Information: ℹ️
    iMac (27-inch, Late 2009) (Verified)
    iMac - model: iMac11,1
    1 2.66 GHz Intel Core i5 CPU: 4-core
    12 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 0/DIMM1
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM1
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    ATI Radeon HD 4850 - VRAM: 512 MB
        iMac 2560 x 1440
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: 25 days 2:39:43
Disk Information: ℹ️
    WDC WD1001FALS-40U9B0 disk0 : (1 TB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        1 TB WDC (disk0s2) / : 999.35 GB (766.77 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5680H
USB Information: ℹ️
    Logitech USB Keyboard
    Western Digital My Passport 0820 2 TB
        S.M.A.R.T. Status: Verified
        EFI (disk1s1) <not mounted> : 210 MB
        MyPassport (disk1s2) /Volumes/MyPassport : 2.00 TB (862.18 GB free)
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Griffin Technology, Inc iMic USB audio system
    Apple Inc. iPod
    Logitech USB Laser Mouse
    Apple Inc. Built-in iSight
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Karabiner.app
    [loaded]    org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) [Support]
        /Applications/Parallels Desktop.app
    [loaded]    com.parallels.kext.hidhook (9.0 24251.1052177) [Support]
    [loaded]    com.parallels.kext.hypervisor (9.0 24251.1052177) [Support]
    [loaded]    com.parallels.kext.netbridge (9.0 24251.1052177) [Support]
    [loaded]    com.parallels.kext.usbconnect (9.0 24251.1052177) [Support]
    [loaded]    com.parallels.kext.vnic (9.0 24251.1052177) [Support]
        /Library/Extensions
    [loaded]    com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) [Support]
        /System/Library/Extensions
    [not loaded]    com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Support]
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.wdhelper.plist
Launch Agents: ℹ️
    [running]    com.Logitech.Control Center.Daemon.plist [Support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Support]
User Login Items: ℹ️
    Macs Fan Control    Application (/Applications/Macs Fan Control.app)
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Firefox    Application (/Applications/Firefox.app)
    Karabiner    Application (/Applications/Karabiner.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
    Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
    Default Browser: Version: 537 - SDK 10.9
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
    iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
    Flash Player [Support]
    Logitech Control Center [Support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         3%    WindowServer
         1%    fontd
         1%    MacsFanControl
         0%    prl_client_app
         0%    RStudio
Top Processes by Memory: ℹ️
    3.14 GB    prl_vm_app
    850 MB    firefox
    296 MB    com.apple.WebKit.WebContent
    271 MB    Mail
    232 MB    mds_stores
Virtual Memory Information: ℹ️
    414 MB    Free RAM
    5.25 GB    Active RAM
    5.03 GB    Inactive RAM
    1.58 GB    Wired RAM
    22.68 GB    Page-ins
    3.09 GB    Page-outs
Diagnostics Information: ℹ️

Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

Java running slowly in particular user profiles.

Hi All,
I have this continuing problem in that my java version(latest) runs slowly under my user profile.
If i log into my computer using someone elses profile it is very fast.
Could this be some sort of setting in my user profile, a java problem
or a java setting under my profile?
Any help will be greatly appreciated.
Thanks in advance!

Sounds like an issue with your profile not with Java. But I can only make guesses. Does anything else run slower on your profile than in others?

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

Ubuntu running under Hyper-V with high load

I'm running a VM for Ubuntu Server 12.04 LTS under Hyper-V and with no web server or any other public server installed, the system load is 1.0
The VM is using a 75GB fixed VHD on its own partition (the hard drive is using raid 0).
Is this normal for running a linux OS under Hyper-V?
Here's what top shows (i restarted the vm for fresh numbers, but it still shows a load of 1.00 even after its been running for a day):
top - 16:58:17 up 23 min, 1 user, load average: 1.00, 0.58, 0.24
Tasks: 235 total,   1 running, 234 sleeping,   0 stopped,   0 zombie
Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 98.8%id, 1.0%wa, 0.0%hi, 0.2%si, 0.0%st
Mem:   4040336k total,   870384k used, 3169952k free,    13232k buffers
Swap: 7812092k total,        0k used, 7812092k free,   225396k cached
The host OS is running Windows 2012 R2 and it too isint running anything else that would put a lot of load on the server.

Hi Sir,
        The following daemons must be installed manually for Ubuntu distributions:
VSS Snapshot daemon – This daemon is required to create live Linux virtual machine backups.
KVP daemon – This daemon allows setting and querying intrinsic and extrinsic key value pairs.
To install both daemons, please use the following command:
Copy
# sudo apt-get update
# sudo apt-get install hv-kvp-daemon-init
# uname –r
<kernel release>
# sudo apt-get install linux-tool-<kernel release>
# sudo apt-get install linux-cloud-tools-<kernel release>
Please refer to note 5 , 9 within following article :
https://technet.microsoft.com/en-us/library/dn531029.aspx
As for linux VM running on hyper- v, I would suggest you to try to get further assistance from this forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=linuxintegrationservices&filter=alltypes&sort=lastpostdesc
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Application Runs Under Windows 8.1 But Not Under Windows XP (I Know XP Is Deprecated)

The problem is with the obtuse error message put out by Windows's program loader. It reads, in part, "..is not a valid Win32 application." The application runs everywhere except on Windows XP. Looking for root cause of the problem. It's a very
simple application. Only a few lines of code.
C:\Packaged-Software\32-BIT\Reboot.exe is not a valid Win32 application.
Proposed nature of the problem:
1. The file was downloaded from a website but the download was incomplete.
2. The full file system filename path contains bad characters such blank space.
3. Visual Studio constructed an application that won't run anywhere much less on XP.
4. The supporting libraries are not properly installed (e.g. .NET Framework4, and VCREDIST).
Retorts:
1. The file wasn't downloaded from a website and is intact.
2. The filename path doesn't contain any spaces.
3. The application runs under Windows 8.1. Also on Windows 7.
4. The supporting libraries are properly installed.
So, what's the problem? One surely will not discover the root cause from "not a valid application."
Body must be 4 to 60000 characters long. I had put the code here. It isn't 60000 character long. But it validated as if there are more than 60000 characters. Sorry for the incomplete submission due to website construction error.
MARK D ROCKMAN

Hi F7H2fw,
How did you develop the application ?
Here is a similar symptom and this may explain the issue somehow:
Setup.exe is not a valid Win32 application
http://blogs.msdn.com/b/vsnetsetup/archive/2012/10/16/setup-exe-is-not-a-valid-win32-application.aspx
I suspect there is a compatibility issue here .
Considering this is more likely a developing issue .It is recommended to ask for help from our MSDN Forum .They are more familiar with the developing issue .If it is possible ,please attach the code in that thread .Thanks for your understanding and cooperation.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly.

I would like to uninstall or otherwise safely remove any applications that make my MB Pro run slowly. I will have to keep a few apps such as CrossWeb and Veraport due to having to use secure banking and government websites in Korea. I also need the LogMeIn app to access a server in the USA, but I realise that some people recommend getting rid of it.
I tried but apparently have been unsuccessful in removing a McAfee VirusScan application completely. I can still see some files in the HD Library. Any ideas here on how to safely uninstall/remove?
Also any suggestions on how to get rid of my incompatible virtualbox? I think it's 4.0.4.
Also, if you see anything else I should uninstall/remove from the EtreCheck below, by all means please make suggestions.
Thanks so much for your help, suggestions, and advice!
Hardware Information:
    MacBook Pro (15-inch, Mid 2010)
    MacBook Pro - model: MacBookPro6,2
    1 2.53 GHz Intel Core i5 CPU: 2 cores
    4 GB RAM
Video Information:
    Intel HD Graphics - VRAM: 288 MB
    NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software:
    OS X 10.9.2 (13C1021) - Uptime: 0 days 1:55:49
Disk Information:
    ST9500325ASG disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (295.55 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-898
USB Information:
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. Built-in iSight
    Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Gatekeeper:
    Anywhere
Kernel Extensions:
    [not loaded]    com.cisco.cscotun (1.0) Support
    [kext loaded]    com.logmein.hamachi (1.0) Support
    [kext loaded]    org.virtualbox.kext.VBoxDrv (4.0.4) Support
    [not loaded]    org.virtualbox.kext.VBoxNetAdp (4.0.4) Support
    [not loaded]    org.virtualbox.kext.VBoxNetFlt (4.0.4) Support
    [kext loaded]    org.virtualbox.kext.VBoxUSB (4.0.4) Support
Startup Items:
    KeyAccess: Path: /Library/StartupItems/KeyAccess
    VirtualBox: Path: /Library/StartupItems/VirtualBox
Launch Daemons:
    [failed]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.SwitchBoard.plist Support
    [running]    com.cisco.anyconnect.vpnagentd.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [running]    com.logmein.hamachi.plist Support
    [running]    com.sassafras.KeyAccess.plist Support
    [loaded]    com.tunnelbear.mac.tbeard.plist Support
Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.cisco.anyconnect.gui.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [running]    com.logmein.hamachimb.plist Support
    [loaded]    com.sassafras.KeyAccess.plist Support
User Launch Agents:
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.spotify.webhelper.plist Support
    [not loaded]    org.virtualbox.vboxwebsrv.plist Support
User Login Items:
    GrowlHelperApp
    GrowlHelperApp
    iTunesHelper
    SuperDrive Update 2.1
    Google Drive
    Dropbox
    DaumLiveAgent
    KeyAccess
Internet Plug-ins:
    npCrossWebPlugin: Version: 1.0 - SDK 10.5 Support
    o1dbrowserplugin: Version: 5.3.1.18536 Support
    Google Earth Web Plug-in: Version: 6.1 Support
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 2.4.1.4 Support
    OfficeLiveBrowserPlugin: Version: 12.3.6 Support
    RealPlayer Plugin: Version: (null) Support
    AdobePDFViewerNPAPI: Version: 10.1.10 Support
    FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
    DivXBrowserPlugin: Version: 2.0 Support
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
    Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.3.1.18536 Support
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewer: Version: 10.1.10 Support
    Veraport: Version: 1.1.0.2 - SDK 10.7 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
    DivX Support
    Flash Player Support
    Flip4Mac WMV Support
    Growl Support
    KeyAccess Support
    Symantec\nQuickMenu Support
Time Machine:
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 464.96 GB Disk used: 189.71 GB
    Destinations:
        Data [Network] (Last used)
        Total size: 2
        Total number of backups: 30
        Oldest backup: 2012-08-12 07:49:57 +0000
        Last backup: 2014-05-05 04:48:48 +0000
        Size of backup disk: Excellent
            Backup size 2 > (Disk size 464.96 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU:
         3%    WindowServer
         0%    fontd
         0%    PluginProcess
         0%    Google Drive
         0%    com.apple.WebKit.Networking
Top Processes by Memory:
    188 MB    com.apple.IconServicesAgent
    143 MB    Finder
    143 MB    mds_stores
    102 MB    Safari
    98 MB    WindowServer
Virtual Memory Information:
    53 MB    Free RAM
    1.55 GB    Active RAM
    1.50 GB    Inactive RAM
    787 MB    Wired RAM
    537 MB    Page-ins
    316 KB    Page-outs

You have so much junk, and I doubt that you know how to uninstall it.
It's up to you what you do, I know what I would do (but then I wouldn't stuff my Mac with junk in the first place)
Good luck.

My application's page(sql report) run slowly

Hi,All
I have a apex with 3.2.1 version, on my WIN7 OS.
The application can run normally,
But sometimes the page sumbit very slowly,about need waiting 2 or 3 minutes (Most of time it runs normal)
My reports is sql report, and not complicacy.
These reports all connect remote db,and general select only 1-8 tables
So i want to ask why they runs slowly
Any one help me ,very thanks.
saven

Hi,Jari
Apex version is apex 3.2.1
Database version and release 11G release2
server architecture i think is embedded PL/SQL.
My apex address is here ----http://localhost:8080/apex/f?p=4550:1:3085321679475823::::FSP_AFTER_LOGIN_URL:\f?p=4500|1000|84584318503228\
one of error is : IBMPC/WIN_NT-8.1.0
expect your help
saven

Mac Mini i5 2.3 Ghz 2RAM running slowly with basic applications

My Mac Mini is running very slowly, everything I do is running slowly from google chrome to destop functions. My internet lags and I can hear the processor working chirping away all thwe time. I have tried to defrag and even turned off the wifi to see if it was internet related. Even textedit and preview drag and when they do open the window opens slowly. I am going to take it to the genius bar this week, I wonder do I really need more RAM? I am using Lion 10.7.4 Mac Mini i5 2.3 GHz. I am getting apple's router and replacing my belkin to be on a secure network. Any tips or suggestions? My Hardrive space is still open maybe 10-15% used. I am still under warranty as well Thank you.

Open Activity Monitor and check the RAM usage.
see > Using Activity Monitor On Your Mac – Noob2Pro #19 | Mac Tricks And Tips
and > How to use Activity Monitor to make your Mac faster - The Next Web
Keep in mind that 2GB of is the minimum RAM requirement for Lion and it's not really the optimal amount to run much more than itself and a web browser without pages out the the HD.
For upgrading the RAM check either the User's Guide that came with your iMac or the following Installation guide. > Mac mini: How to remove or install memory
Also for RAM upgrade kits, both OWC and Crucial are highly recommended here in the forum.

What can I do to my MacBookPro to stop running slowly?

My MacBookPro runs slowly. I found out that kernel_task takes a lot of memory space. What can I do to make it run faster?
I used etrecheck to scan and came up with the below scan result;
Problem description:
My MacBookPro is running slowly and on checking the activity monitor, I found that the kernel_task is taking most of the memory.
EtreCheck version: 2.1.1 (104)
Report generated December 10, 2014 at 19:48:10 GMT+1
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 2:9:24
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Machintosh HD (disk0s2) / : 499.25 GB (455.42 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Chrome UNKNOWN (missing value)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.0.0 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
User internet Plug-ins: ℹ️
iGetter Plugin: Version: 2.9.2 [Support]
iGetterScriptablePlugin: Version: 2.9.2 [Support]
Safari Extensions: ℹ️
iGetter Extension
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Auto backup: YES
Destinations:
Time Machine Backups [Local]
Total size: 499.76 GB
Total number of backups: 1
Oldest backup: 2014-12-06 17:03:58 +0000
Last backup: 2014-12-06 17:03:58 +0000
Size of backup disk: Excellent
Backup size 499.76 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      10% WindowServer
      9% Google Chrome
      4% Activity Monitor
      2% hidd
      1% sysmond
Top Processes by Memory: ℹ️
198 MB Google Chrome
94 MB mds_stores
90 MB ocspd
73 MB WindowServer
69 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
538 MB Free RAM
2.12 GB Active RAM
975 MB Inactive RAM
663 MB Wired RAM
988 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 10, 2014, 05:39:22 PM Self test - passed

Your Virtual Memory page-outs indicate your RAM is not stressed under the conditions during which the test ran.
Your greater issue is the Trusteer software. Banks recommend it knowing nothing of Macs and that Macs do not run properly with Trusteer. Uninstall instructions here:
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x

Error: Adobe Flash Player 9 run slowly!

Hi folks,
I am working since a long time on a big model. Now I am nearly complete but something is going wrong after deploying into the portal.
Compiling and deploying works fine. But when I start to run my application, the program is getting aborted with following error pop-up: "A script in this movie is causing Adobe Flash Player 9 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?". After this error message, I have to click yes, since nothing responses anymore when I don't do so.
I am calling a huge number of Bapis in my model. When I delete one of the last called Bapi in the model sequence the above described problem doesn't occur anymore. But I need all Bapis in the model!
Do I have the chance to attach my model somewhere to give you the chance to have a look at it? Maybe it would be much easier then to solve the problem.
I am looking forward to here from you.
Thank you very much.
Aylin.

Hi Marcel, hi Benni,
first of all thank you for your answers.
I have uploaded the exported model, which you can download following this link:
Maybe, to answer the question of Benni, some description of my model:
I am working with 3 layers, which are parts of a wizard.
In the first layer you can select between 3 entries in a drop-down-box and jump to the next layer with pushing the button "next". Depending on which entry you have choosen from the drop down box, you will be shown one of the 3 form views in the second layer (I worked here with a store element and visibility condition).
In the second layer now, you can choose several entries clicking the clickboxes. Clicking the button "next" you will jump to the next layer.
Here is a value help to search for customers (ERP-Customer Table). After you have choosen a customer, Project Number and Project Description for 2 projects will be entered.
After clicking the submit button the main process starts in the backend:
A cprojects template will be copied and changed regarding to the entered project data. This will be done for 2 projects in parallel. Next step ist to read out of a table the corresponding internal order from the first project and use it as input to create an Sales Order. In parallel also the Internal Order of the second project will be searched. After the Sales Order is created with the Internal Order of the first project, the second Internal Order will be used as input to change the existing Sales Order. Depending on if the "Data Conversion" component in the second layer is clicked, als an Purchase Order will be created (worked with a condition here).
The 2 form views are the output of the steps described (2 projects, Internal Orders and Purchase Order).
Since I have to create the project structure depending on which components have been checked in the second layer, I am working that way, that I am using a project structure where all components are in it. Depending on which components have been selected, I am deleting the ones, which have been not selected from the existing Project (I am doing this only for the first Project). Therefore I have to load the Project Definition of the Project (condition), I have to load the Project Phases which contain tasks to delete (i.e. when "Data Conversion" is not clicked, Project Phase 3 has to be loaded, since this component as a task under Project Phase 3. I worked also with conditions here). Then I have to delete the appropriate task (condition). Since the Bapis do not have a commit part in them, I have also to run commit Bapis to submit the changes into the backend (cProjects Commit Work).
To come back to Benni's question, if the last Bapis are working: Yes, they do. The same model worked on Thursday evening. And now, I always get the same error message. I do not really know, how to work with this timer. Can you give me advice?
I don't know, if you have access to our systems. But if you need test data to run the model, let me know.
Thank you very much.
Aylin.
<a href="https://sapmats-de.sap-ag.de/download/download.cgi?id=X5LDIBPJBA1KHA87IGX1UODP7P934R17SYAIQU2MVSKI6Q85TB">VC Model</a>

My computer is running slowly and slowly

my computer is running slowly and slowly and the sound of fan becomes louder and louder .I suspect my computer get infected by virus

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/ { n++;print;} END { if(n<185) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<185) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Application running slowly under Hyper-V (factor of 100 times slower)

Similar Messages

Maybe you are looking for