Application Update issue

Hi Friends,
I have one application on app store which I just have uploaded  with v1.0.
where I got one problem that the one xib missing the UITestfield.
so I updated the code and uploaded the application again on the app store(v1.1).
In both case application is uploaded successfully.
The problem comes here
I already had applicaiton installed on my iphone with v1.0
After that I have received the new updates and then I installed the application v1.1, however it was not showing me the textfield in the xib(screen).
Then I removed the application(v1.1) and installed it by downloading directly from app store and then it started working properly.
so I am not sure that when I tried updating application, why the changes were not reflected ?
AS there might have multiple users downloaded the v1.0 application and whoever does the upgrade might will receive the same problem.

There is indeed a way to tell whether you have the refreshed version or not. But this is not expensive as a 600MB download.
From your current installation, drag and drop the PPC50.ARMV4I cab file from $OH\mobile_oc4j\j2ee\mobileserver\applications\mobileserver\setup\us\ppc50\armv4i\olite.cab to your cab device. Tap on it. Open \OraCE\polite.txt. If you have NLS_SORT and NLS_LOCALE, then you have the refresh version.
Sorry if it sounds not so straighforward. This is the easiest way I can think of so far, till something else clicks !
Edit: If you are on the 10.3 Refresh, you should not face the issue mentioned in the first post of Installation of SDK CAB Files for PPC50 failed (Olite 10gR3)

Similar Messages

  • Application updates issue after upgrading to 8.1

    After upgrading to iTunes 8.1 I've got some ghost application updates indication.
    Look at the screenshot: http://yfrog.com/0bitunes81bugp
    Installing new applications doesn't do anything, installing new updates doesn't do anything either. However, when I deleted some junk app, it decreased the phantom updates counter by 1. So I guess that if I delete all the applications (or guess those 7 that cause it) and then re-download them, then all will be fixed, but that's some inconvenient hack.
    Does anyone have a better solution?

    Oh, thanks for all the support, I've found the cause and now I'm perfectly OK.
    But, oh, Apple is screwed once again. I am not surprised at all. Find better programmers, **** you! And you should improve your customer support!

  • AppStore application updates issue

    From within iTunes 8 I get the message that there are updates for 10 applications available (I have NOT downloaded them though).
    From the iPod Touch (v2.1 installed) I can browse the AppStore fine but checking for application updates here I only get the info "All application are up to date".
    Any ideas what the reason for this is?
    I'd like to update on the iPod only because updating through iTunes (at least with v7.7) had these strange side-effects (like storing the updated version with applicationname.1) but of course can't when AppStore on the Touch doesn't see the updates....
    Regards,
    SpaceAceOne

    Sure, that would be a way to do the actual updating process for the 10 applications.
    But I was wondering why the AppStore on the Touch does say that everything is up to date while iTunes 8 says that there are updates for 10 of my applications (I have installed about 28 applications on my Touch)
    In the past the AppStore on the Touch also told me about updates! Maybe 2.1 has broken this somehow? (I don't have any other problems with 2.1)
    Regards,
    SpaceAceOne

  • ITunes Applications Update Issue

    Since updating to the latest version of iTunes (last two versions), I noticed that clicking on the "Check for update button" under the applications section, if you have an iPhone, causes iTunes to show you applications that actually dont need updating. Anotherwords, looking at the available updates on the actual phone itself, you can see there are two updates for example. Going into iTunes and clicking on the button to check for updates, shows that there are updates for almost all of my applications where in fact, my applications do not need updating. When browsing my mac to the default applications folder, you can see that there are several itteratinos of the same application with a "_1 or _2" at the end. Why does iTunes keep the old versions of the applications? It should ask you if you would like to remove the older version to the recycle bin or simply remove the older versions behind the seens. Also, the check for update button it very buggy. If you succesfully update the application on the phone itself, then sync to your mac then click on the check for update button in iTunes, it tells you that there are no updates avaialbe. But why was I shown that there were updatees for lots of my other applications when in fact there were not?

    hi guys, well - in my case i discovered what was happening...maybe it's the same for you.
    problem: applications (in itunes) said i had several updates available, but when i'd go to download the them it said there were no updates avail for me. for a while now i've been unable to update these apps.
    solution: i did a get info on one of the apps - clicking on the applications tab in itunes you can totally see the apps there...just "control-click" or "right click" and get info (command-I also works).
    anyway, look and see what user that app belongs to. sure enough, the account i was currently logged into itunes with was not the account that purchased the apps. i logged out of itunes, menu bar/store/sign out - then i logged back in with the correct user.
    fixed.
    all the apps updated, and the number disappeared from the apps icon...totally fixed.
    well, hope that helps. was a completely simple solution and i'm surprised it took as long as it did for me to figure it out.
    cya,
    -dave

  • Site Manager Update Issue Continues

    Duncan;
    It appears that the iTunes U Desktop Application update issue has not been resolved. I added new content to a collection (see attached link) on Friday. As of this morning, the tracks have not appeared in the iTunes U Desktop application (ver. 10.0.1), although they do appear in the Quick View Preview, but cannot be previewed in that window.
    The tracks have been available for preview and download all weekend on the iPad and iPhone.
    Syd Rodocker
    Tennessee Department of Education
    http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewiTunesUCollection?id=39129 4396

    Greetings All;
    Just checking to see what, if anything has happened with the Public Site Manager Update issue on your campus or in your office.
    I've uploaded content that still hasn't shown up in the iTunes Desktop Application in over two weeks.
    Oddly enough, I have added URL's to our site, and that information shows up within an hour of Publishing the site.
    Just wondering if anyone has experienced a resolution of the issue.
    Syd Rodocker
    Tennessee Department of Education

  • The Ap store on my iPad shows threr is an application update ready.  However thhere is no update.  My wife has the same issue on her iPad.  What needs to be done?

    The Ap store on my iPad shows threr is an application update ready.  However thhere is no update.  My wife has the same issue on her iPad.  What needs to be done?

    There are countless posts about this.  There's a problem at Apple's end and has been so for several days.
    However, I have no trouble updating using itunes on my computer and later syncing to my device.

  • [Application Update Error] - The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text.

    Hello,
    I developed a custom SharePoint 2013 Application (SharePoint hosted) and everything works fine. If I tried to update the application and I ran into the following error:
    The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text. List
    of possible elements expected: any element in namespace '##any'.
    If I redeploy the application (without update, just a new instance) everything works fine. Only the update scenario throws the exception above. 
    I tried different things to solve that issue:
    I recreated the feature
    I checked all the custom field definitions, content types and lists inside the app. 
    I tried different O365 tenants and a SharePoint 2013 On Premise Development Server (Same problem on all systems)
    Can anybody give me a tip to solve that problem?
    Thanks in advance

    Hi,
    According to your description, when you try to update your SharePoint Hosted App, an error occurs.
    To narrow down the issue, I would suggest you create a simple app without other components in it, deploy it and then update it to see if this error will still occur.
    Once you get a workable app without the update issue, then you can add other customizations one after one in this app and perform the update. By doing this, it would
    be easier to find out the root cause.
    Anyway, you can take a look at the link below about updating app for more information:
    http://msdn.microsoft.com/en-us/library/office/dn265910(v=office.15).aspx
    Feel free to reply if there any progress.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Patrick Liang
    TechNet Community Support

  • Submit button in Compressor disabled after update Pro Applications Update 2010-02

    Dear all,
    I recently bought FCS and the whole software works fine after installation. However, I had to use Compressor over the last couple of days and the submit button was completely disabled and in the cluster field the option this computer had dissapeard. I checked this forum for a solution and found it. It seems that the problem was Qmaster. After reinstalling both Qmaster and Compressor everything works again. I have use the following set of instructions:
    http://www.digitalrebellion.com/blog/posts/how_to_reinstall_compressor_and_qmast er.html
    The problem is that now each time I do a software update, I am asked to install the Pro Applications Update 2010-02. After installing this update, the problem occurs again (the submit button is grayed/greyed out). It seems that in my computer the update creates a problem.
    Does anyone have the same issue and if so, what suggestion you recommend?. At the moment I am avoiding the update, but I may me missing important bug and other fixes.
    Thanks a lot,
    Oliver

    I have experimented a bit and got the problem sorted. Iuninstalled FCS using the uninstaller from http://www.digitalrebellion.com/fcsremover/.Before installing the whole suite again, I realised there was and additionalApple Qmaster package in the Applications folder. I deleted this file and emptythe trash. Then did a fresh installation of FCS, performed an update andinstalled Pro Applications Update 2010-02.
    And now all is up and running workingperfectly.
    Oliver

  • Pro Applications Update 2008-02 Update for Logic Studio Owners?

    I received Compressor 3.0.3 as part of the Logic Studio 8 bundle.
    Pro Applications Update 2008-02 states that it upgrades Compressor 3.0.3, however, Software Update does not offer to update Compressor nor can I download it manually since it is demanding that I provide a Final Cut Pro serial number (which I do not have, I have only the Logic Studio serial number which it won't take).
    Does anyone have any idea what Logic Studio owners are supposed to do to obtain Pro Applications Update 2008-02?
    Dave

    Well, I would agree except that the update specifically provides an update for Compressor 3.0.3 which Logic Studio owners have as well and the update description states that it is recommended for all Logic Studio users.
    "Pro Applications Updates improve reliability for Apple's professional applications and are recommended for all users of Final Cut Studio, Final Cut Server, and Logic Studio.
    Pro Applications Update 2008-02 addresses installation issues, compatibility updates, and general performance issues and improves overall stability.
    Applications included in the update:
    Final Cut Pro 6.0.4
    Compressor 3.0.3"
    Dave
    Message was edited by: daveporter

  • Pro Applications Update 2008-01    Good or Bad experiences ?

    Hi Guys,
    Who's up dated to the - Pro Applications Update 2008-01
    and have their been benefits or issues ?
    Cheers
    Tom K

    Everything is up to day via software update:
    LiveType 2.1.3
    FCP 6.0.3
    QT 7.4.5
    OS X 10.4.11 (Can't run Leopard on either of my Mac Pros (G5 Quad and Intel 2.66 2x core-duo) because I run ProTools on both (TDM on the Intel, LE on the G5)
    I mostly use the second internal drive for video stuff, but I have three FW-800 drives for backing up older projects, DVD images, etc.
    My test was pretty simple: in Livetype, I typed in some text which took three lines, applied various textures to a separate track and to the matte; put in some "live fonts," do some fade effects. I did this on both a regular NTSC SD project and a HD (ProRes 422) 1920x1080 project. It all works, rendered OK, exported, etc. I put the resulting video files through compressor to create SD MPEG2 files and they worked, too.
    I've been using 6.0.3 pretty extensively for a project (two hour movie of a play), and again, it all seems to work just fine. The long standing problem with some HDV not "conforming" correctly (exceedingly blocky video in places) has NOT been resolved with the update; the same time line rendered and exported as ProRes 422 is just fine, so it is an HDV issue.
    Eddie O

  • Pro Applications Update 2005-1 where the **** is it?

    Someone please tell me where Pro Applications Update 2005-1 is...
    I've had to downgrade to Mac OS X 10.4.9 because of some conflicts and after so many problems this is having me stuck. And how the **** do you email Apple to tell them your Serial Number is genuine even though the webform thinks it isn't?
    ARGH!!!!
    Thanks in advance
    Mike

    Have you gotten the latest update, which came out a day ago and includes support for FCS1?
    If this is not a time-sensitive issue, you may want to just wait until 10.4.11, which may fix the problem.

  • Pro Applications Update 2005-01 keeps reappearing in Softwware Update

    Hello. For the past few weeks, Pro Applications Update 2005-01 has shown up in Software Update. I have installed the update quite a few times, and it keeps appearing. I've told it to install several times. Computer info below is still accurate.

    Have you gotten the latest update, which came out a day ago and includes support for FCS1?
    If this is not a time-sensitive issue, you may want to just wait until 10.4.11, which may fix the problem.

  • Pro Applications Update 2009-01 doesn't change version numbers?

    Hi,
    I ran the Pro Applications Update 2009-01 on my FCS installation. The update seemed to work fine, but when I open up FCP or any of the other apps, the version numbers are not changed. From the Pro Application Update page:
    "Pro Applications Update 2009-01 is a revision to Final Cut Studio (2009). This update includes Final Cut Pro 7.0.1, Motion 4.0.1, Soundtrack Pro 3.0.1, Color 1.5.1, and Compressor 3.5.1. The software addresses general compatibility issues, improves overall stability, and addresses a number of other minor issues."
    Since none of my FCS apps have upgrade version numbers, I can't tell if any of the fixes were applied. Is it possible I did something wrong when I ran the update?
    Thanks.
    Mike

    Thanks Larry and David for your responses, but unfortunately I'm not seeing what you are
    My Final Cut Studio 2009 apps are upgrades from the previous version. All the apps for FCS are in a "Final Cut Studio" folder that I created in Applications to hold the programs (I also drag this folder to the dock to have easy access to the apps).
    If I do a Command-I on the apps in this folder, they all show the old versions. Spotlight shows there are no other versions other than the ones in my "Final Cut Studio" folder.
    I wonder if the update's not working because I have the apps in a folder other than the original install location? The funny thing is that both VersionTracker and CNet's TechTracker say that there are new versions to install. But I would think that the updater would fail if I moved the apps from their original locations, not just end successfully?
    Mike

  • Pro Applications Update 2009-01

    On Software Update Today:
    *Pro Applications Update 2009-01 is a revision to Final Cut Studio (2009).
    This update includes Final Cut Pro 7.0.1, Motion 4.0.1, Soundtrack Pro 3.0.1, Color 1.5.1, and Compressor 3.5.1.
    ...from the release notes for Compressor 3.5.1
    *Fixes the ability to inspect surround sound jobs.
    *Addresses a transcoding issue with automatic resizing for videos recorded on iPhone and iPod Nano.
    *Improves quality when using the Frame Controls Resize Filter for HD to SD DVD case.
    *Fixes an issue in which transcodes between Apple ProRes codecs resulted in output media files with incorrect color values in letterbox and padding areas.
    *Fixes issue with redraw of file names in the Inspector when replacing audio files.

    Works for me, I have done 3 short tests from AVCHD to 1080i Prores LT to .m2v and the results are much better, before I had banding and bad aliasing. The results are now much better. I didn't need to adjust aliasing setting.
    See set up below :
    Name: DVD Better
    Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
    File Extension: m2v
    Estimated size: 3.38 GB/hour of source
    Type: MPEG-2 video elementary stream
    Usage:SD DVD
    Video Encoder
    Format: M2V
    Width and Height: Automatic
    Pixel aspect ratio: Default
    Crop: None
    Padding: None
    Frame rate: (100% of source)
    Frame Controls On:
    Retiming: (Fast) Nearest Frame
    Resize Filter: Linear Filter
    Deinterlace Filter: Better (Motion Adaptive)
    Adaptive Details: On
    Antialias: 0
    Detail Level: 0
    Field Output: Same as Source
    Start timecode from source
    Aspect ratio: Automatic
    Selected 16:9
    Field dominance: Automatic
    Average bit rate: 7.7 (Mbps)
    1 Pass VBR enabled
    Maximum bit rate: 9 (Mbps)
    Best motion estimation
    Closed GOP Size: 1/2 second, Structure: IBBP
    DVD Studio Pro meta-data enabled
    Cheers
    Paul

  • Pro Applications Update 2007-02 Can't be installed

    Hi, not sure if this is a Leopard thing or a Logic 8 thing, but I cannot install the latest software update "Pro Applications Update 2007-02 v1.0 930kb" - it downloads and then says "Sorry an unexpected error occurred" - not very helpful
    Any suggestions?
    TIA

    UPDATE
    Ok, Found what the issue is. Its down to a Quicktime Codec that you can find in /Library/QuickTime (Not the user directory, but the one off root)
    What you need is a file called AppleHDVCodec.component
    The latest is version 1.3.2 dated 5th November
    Update 2 installs this, but Update 1 wont install over the top as its a newer file.
    Download both Update 1 and 2 from Apple, then open the contents of both (Don't run them, click Show package contents in context menu)
    You need to unzip the gz files and you can copy out the above file. Do this for both files but keep them separate, you will need both.
    Put update 1 file in place first (Overwrite or backup your file in the location given at the top of this post ) then run SW update. It will recognise the version and ask to install Update 2 - Dont !
    Then grab the file from the update 2 gzip and copy this file over the one from update 1
    Then run SW Update again and it will say all is Ok and you dont need any updates
    Its a real mess, but works.

Maybe you are looking for