Applying the corrections given in the SAPNOTE

gurus ,
i found a solution to my problem in an SAPNOTE . in that they have given to apply a correction .
but so far i have not applied any correctins .
how to apply that .
i need to apply note 1036427 & 1011377 ....
ikindly guide me how to apply the corrections given in that
hoping for your quick and valuable response

Hi Susin.
I check both the notes , there is no need of manual coding to that as per my knowledge.
These notes are processed by the system itself.
Pls goto SNOTE ( tcode) then in the menu -> goto -> download sap note.
give the sap note number there and click ok , then it will be downloaded and can be seen in under sap -> New .
Then go into New and select the sap notes that downloaded and execute.
If there are any manual interventions needed then the system will specify that .
Then after executing the note will come under sap - In processing.
If the green tick mark comes the notes is successfully implemented other a waring or error message comes , if error message comes then click on that you will see what all are missing.
Pls kindly let me know what error messages you are getting after executing the note so that we can help you to implement the note successfully.
Regards,
Vvieks

Similar Messages

Same shooting, multiple lenses, how to apply the appropriate lens correction when importing ?

Hello everyone,
How do you handle this:
For each camera, i have a default preset i'm choosing manualy and applying when importing my raw files into lightroom.
I'd like to also add some default lens correction to those presets.
The problem is that multiples lenses (meaning different corrections) may be applied.
How to apply the correct lens correction for each file, in the batch import ?
Thanks for your ideas ...
Aymeric

Update your existing develop presets so that the Lens Corrections are checked (see attached screen shot). Select the develop preset in Import dialog. Lr will automatically apply the appropriate default lens profile to each individual image during import.

When I apply the Key for a green screen, everything blue turns purple. How can I correct?

When I apply the Key to an evenly lit greenscreen, anything blue turns purple. How can I correct this?

There's way too much blue in that green screen
This is green
Try pulling down the spill level and reducing the spill tint. You're probably going to have to tweak the color selection manually.

Facing problem in applying the apply the note sapnote 1046758

Dear All,
To display acknowledgement number in Form No 16A
I am facing problem in applying the apply the note sapnote 1046758 there is one TDS_Certificate_500.sar as attachment I have to apply in the system.
After uncar the file there are 2 file with the exetion K105630.P6D and R105630.P6D.
Please suggest how can I apply.
Regards,

Hi Suman,
Thanks a lot but I am facing again an problem in using the T-code SAINT it is give an error
You can only use the display mode
Reason: OCS is locked by transaction SPAM
Process all the steps of the transaction SPAM until they are completed
After see the SPAM there an support package Queue SAPKH50012 and
The status
Queue is defined for the
Software Component: SAP_APPL
SPAM status: there there is yellow light
Next action: Import queue
Pease suggest me how can I unlocked transaction SPAM or release spam from queue.
Regards,

Apply color correction to the sequence, not clip

Is it possible to select all clips in the sequence, then apply color corrector, or brightness/contrast filter _with a specific setting_ to the whole sequence?
Currently when I select all in the sequence, apply a correction through effects > video ... etc, then change a setting, it will only change the setting one clip from the sequence.
I know it is possible to work around this and do it with one clip and then paste attributes, but if there's another way, please let me know.
Thank you!

Michel,
That's a great idea, why didn't I think of that? Thank you for your fast reply, I got it near instantly on the iPhone and was laughing at how simple and smart a solution you had!
Cheers,
Roman

HT1296 I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggesti

I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggestion?

I would love to do this as well. All I need is my calendar appts from outlook. Right now I am using google calendar sync, but I would like to move to the cloud and away from google. I find it hard to believe there isn't an option to do this.

Applying color corrections to the original video clips?

How do I apply the same colour corrections I have made to video clips in PremierPro CS5.5, to the original video clips? Is there a way to save the clips from PremierPro to apply the same changes to the original avchd clips?

You would have to export with the correction applied.
These become "Intermediates"

Everytime I copy pages from one ID CS3 doc to another, it re-applies the master page objects!!

Please Help,
This is a topic I would really like to get to the bottom of.
We have InDesign CS3 templates for creating our reports.
These templates contain around 10 different master pages with grey placeholder image boxes and text boxes with dummy text.
When we copy pages from one ID document to another, all the master page objects that were originally assigned to the pages are re-applied!!
Resulting in lots of grey dummy boxes and text boxes re-appearing on top of the page items!!
It's so annoying because we always customise the pages once we've pulled down master pages to work on, so when we copy pages across to other documents we have to apply the blank master to be able to kick out all the master objects easily. Then we need to add the page numbers and footers back onto the blank master page.
My question is, is there a way to switch this off, so when I move or copy pages from one document to another, nothing happens relating to master page objects, the pages simply just copy across as they are?
Please help! If not I may have to ask an external developer to write a script to fix this, it drives 900 of us crazy!
thanks in advance for any help.
Or am I just being ridiculous and not actually realising you can switch this off, doh!
G

Just a bit of further clarification on this issue (very few people really understand what's going on with master pages and overridden master page items):
When you override a master page item, the object is moved to a local page, but a connection is maintained with the original master page item. This a) allows for the override to be removed (and return the object to its original state). This also, b) allows for changes made to the original master page item (other than the changes made to the local item from the point that it was overridden) to effect the local item as well.
When the connection to the master page item cannot be maintained, the local item gets disconnected totally from the master page, and becomes a regular, run-of-the-mill page item.
In light of this, there's three ways you can end up with duplicate master items:
Reapplying a master page (or applying a new one). When you reapply a master, all overridden master page items get detached from the master, and the original mster page item appears again in its original state. Most of the time this produces unwanted duplication of objects. To fix up your page, you have two options: a) Delete the master page item, and b) copying the contents of the original to the new master page item. The disadvantage of "a" is that you end up with an item which is totally detached from the master, and changing the item on the master will have no effect on the local item. The disadavantage of "b" is that it's a lot of work...
Moving a page to a different document. When you move a page to a different document which has the same master as the one originally applied, the master in the new doc is applied, and the effects are identical to reapplying a master page (i.e. overridden objects are detached). If the applied master (i.e. a master with the same name) does not exist in the new doc, the master is transferred over to the new doc along with the page, and the connections to the master page are preserved (well, re-created actually...). The workarounds in case #1 apply here as well.
When page sides change in a document, the objects on the facing page appears.
What happens here is a bit confusing, but here's an approximate explanation:
When you apply a master to a page or spread in InDesign, what you are actually doing is applying an entire spread to an individual page. You can thing of a master spread as an overlay (or more precisely: underlay) on the page with a window cut out to the exact page dimensions.
When the page side changes that "window cut-out" shifts to show the master spread items which correspond to the position within the spread of your current page (i.e. recto or verso). All objects which exist outside the window shift out of view (but still exist!).
When an object is overridden, the position of the object is defined by its location on the local page, NOT its position on the master spread. When the page then changes sides, the object remains where it was on the page (even though the object it's connected to on the master spread moves out of the window of view). A corresponding object on the facing page of the master (if it exists) will then show in addition to the overridden one.
Now remember: contrary to the first two cases, both objects are based on master ones: one visible one and one invisible one.
Dealing with this third case requires much more care than the first two.
The obvious way to deal with this would be similar to the first two, but if you remove the local object and transfer the content to the new maste object, the invisible master object on the non-visible page was actually removed, so when the page sides change again, the object will now be connected to the now-invisible master page item, and the correct master page item will be gone!
The "correct" way to deal with this would be to transfer the content to the new master page item and remove overrides (not delete!) on the local item (which will make it disappear, because it moves back to the invisible page). Of course, when page sides change again, it becomes necessary to repeat the entire process.
If the local object gets deleted, then your master spread is missing objects with no visible indicator of the fact. This can lead to confusion when the document might be edited at some later point in time.
I believe that this complicated and un-intuitive behavior of master pages is part of the reason people tend to avoid using master page items. Documents tend to get messed up in really odd ways... It's a real shame, because extensive use of master page items has a lot of potential for streamlining workflows and saving an awful lot of time. This behavior really puts a damper on really using master pages as templates.
Getting master page items to work the way they "should" was a big part of what I was trying to accomplish with AutoFlow Pro... When the master page items are defined as such (i.e. given a unique name), AutoFlow Pro solves all three of the above issues by keeping overridden master page items connected to the master page items on the currently applied master (and when a new master is applied as well!).
(When I have a bit of spare time, I think I'll write this up on my blog with some visuals to make this easier to grasp...)
Harbs

Opatch issue while applying the patch 6400501

upgrading the database with R12.0.6 for database from 10g to 11g.
as per pre-requisites we have to apply the iAS patch 6400501 According to the doc id 1058763.1
we are applying the 10.1.0.5 version of patch 6400501 to the 10.1.2 Oracle Home
This inventory is not containing the information for this oracle home
the environment is set to the ORACLE_HOME correctly.
We are getting the following error
$ opatch lsinventory
Oracle Interim Patch Installer version 1.0.0.0.57
Copyright (c) 2007 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home : /applprod/apps/tech_st/10.1.2
Oracle Home Inventory : /applprod/apps/tech_st/10.1.2/inventory
Central Inventory : /home/oraprod/oraInventory
from : /etc/oraInst.loc
OUI location : /applprod/apps/tech_st/10.1.2/oui
OUI shared library : /applprod/apps/tech_st/10.1.2/oui/lib/ibm_aix/liboraInstaller.so
Java location : /applprod/apps/tech_st/10.1.2/jre/1.4.2/bin/java
Log file location : /applprod/apps/tech_st/10.1.2/.patch_storage/<patch ID>/*.log
Creating log file "/applprod/apps/tech_st/10.1.2/.patch_storage/LsInventory__04-27-2011_12-06-13.log"
Result:
LsInventory: OPatch Exception while accessing O2O
OPATCH_JAVA_ERROR : An exception of type "OPatchException" has occurred:
OPatch Exception:
OUI found no such ORACLE_HOME set in the environment
Can not get details for given Oracle Home
An exception occurs
null
There is no Interim Patch
OPATCH_JAVA_ERROR : An exception of type "OPatchException" has occurred:
Can not get a list of inventory on this home.
ERROR: OPatch failed because of Inventory problem.
$
Regards
Kk

after running this command i got the error
opatch lsinventory -invPtrLoc $ORACLE_HOME/oraInst.loc
i got the error
$ opatch lsinventory -invPtrLoc $ORACLE_HOME/oraInst.loc
Oracle Interim Patch Installer version 1.0.0.0.57
Copyright (c) 2007 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home : /applprod/apps/tech_st/10.1.2
Oracle Home Inventory : /applprod/apps/tech_st/10.1.2/inventory
Central Inventory : /home/oraprod/oraInventory
from : /applprod/apps/tech_st/10.1.2/oraInst.loc
OUI location : /applprod/apps/tech_st/10.1.2/oui
OUI shared library : /applprod/apps/tech_st/10.1.2/oui/lib/ibm_aix/liboraInstaller.so
Java location : /applprod/apps/tech_st/10.1.2/jre/1.4.2/bin/java
Log file location : /applprod/apps/tech_st/10.1.2/.patch_storage/<patch ID>/*.log
Creating log file "/applprod/apps/tech_st/10.1.2/.patch_storage/LsInventory__04-27-2011_16-04-46.log"
Result:
LsInventory: OPatch Exception while accessing O2O
OPATCH_JAVA_ERROR : An exception of type "OPatchException" has occurred:
OPatch Exception:
OUI found no such ORACLE_HOME set in the environment
Can not get details for given Oracle Home
An exception occurs
null
There is no Interim Patch
OPATCH_JAVA_ERROR : An exception of type "OPatchException" has occurred:
Can not get a list of inventory on this home.
ERROR: OPatch failed because of Inventory problem.

CK40N - Still open even after applying the note

Hello Everyone!
Greetings!
Experiencing issues in the costing run. SAP ECC 5.0
After the marking job completion observed that there are some u2018Still Openu2019 items. After some research found the SAP notes u2013 0000542790, 0001321242 & 0001402978.
SAP note 0000542790 is not applicable to us as the client is on SAP ECC 5.0. For the short term fix, as per the note 542790 have executed the command u2018=cksuu2019. It worked.
To apply the notes 0001321242, 0001402978 was testing in the test systems and I still see the u2018STILL OPENu2019 items even after implementing the SAP notes 0001321242 and 0001402978. Both the notes have been sucessfully implemented and also verified the corrections.
Any suggestions/advice, please. Thanks in advance !
Satish

Hi Satish,
There can be valid reasons for the 'still open' Materials.
The following are reasons for 'still open'
1. the materials were included in another costing run so there was an
overlap in released cost estimates
2. there was already a released cost estimate for those materials so
the system did not allow for another one - this could have been costed
manually and released manually (ck11) rather than in ck40n
3. there was a stop in the job that ran to release them (you mentioned
periods were closed). After the restart, some of the statistics could
have been incorrectly updated.
Furthermore, please see the note:
542790 Inconsistency correction: Costing run statistics
If need need to find the 'still open' Materials.
If you run tCode 'SE16' and view the table table KALM which contains
the entries for all materials costed within the costing run.
Field 'KALM-FEH_STATUS is the cost estimate's status after step costing.
1) Find cost estimates created originally within cstg run
So, you have to select all entries of KALM for the specific costing
run which are having KALM-FEH_STATUS = 'KA'.
This is the number of cost estimates which should have been marked in
the later marking step.
2) Find cost estimates released successfully
The set of released cost estimates is given by selection of table
KEKO: specify KALAID and KALADAT and FEH_STA = 'FR'.
3) Find missing cost estimates
Compare the results of 1) and 2):
Which material/plant have an KALM entry, but not a released cost
cost estimate ?
> this will be the set of cost estimates you are looking for...
Regards,Declan

Error : While applying the Patch 4440000

Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.

Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein

Windows failed to apply the Internet Explorer Zonemapping settings - the data was invald (event ID: 1085)

Hi All,
I have a large domain and a long list of websites that are trusted using the following group policy setting:
Administrative Templates > Windows Components > Internet Explorer> Internet Control Panel > Security Page >
Site to Zone Assignment List
On all (XP/vista/win7) workstations across the domain I'm getting the following error:
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Event ID: 1085
Task Category: None
Level: Warning
Keywords: Description: Windows failed to apply the Internet Explorer Zonemapping settings. Internet Explorer Zonemapping settings might have its own log file.
There's nothing either side of this error in the log that shines any more light on the issue.
I know which group policy object its applying these settings but cant find which of the entries in the site to zone assignment list is causing this issue. I looked in the
Group Policy/Operational log but all I see is the following entry which says "completed" but is logged as an error:
After some research I'm guessing that the issue is an incorrect wild-card. This is what my trusted sites list looks like (with names removed of course):
http://servername.*
*.internaldomain.com.au
*.domain.com.au
*.domain.*
*.externaldomain.com
*.domain.inernaldomain.com.au
*.domain.*
*.domain/name.*
*.domain.inernaldomain.au*
*.domain.com
Is there something obviously incorrect here?
Does anyone know where I could find an article that clearly outlines the acceptable wildcard syntax for the
"Security page\ site to zone assignment list" group policy? Ive read every forum post, website and blog I could find on the internet but nothing is clear and I wasn't able to find an MS document that steps it out. I've also changed the
existing list a number of times based on blog posts etc but had no luck.
**Please Note**
I dont want to change to a different method or have an intellectual debate re why I would have these sites/wildacrd/policy set. I'm really looking to see what entry is invalid and where the documentation is for this policy setting so i can make sure they are
always correct in the future.
thanks in advance for your time and assistance
Simone
PS: I've already read the following posts a number of times:
I get no data but have identified the GP that is causing the issue:
A test case for troubleshooting group policy application – Event ID 1085 and 7016 - http://blogs.technet.com/b/askds/archive/2008/08/21/a-test-case-for-troubleshooting-group-policy-application-event-id-1085-and-7016.aspx
I dont have any 2 letter domain names:
Problems Adding Top-Level Domains to Zone Sites List - http://support.microsoft.com/kb/259493
I tried formatting the list per this article:
[Solved] The Group Policy client-side extension Internet Explorer Zonemapping failed to execute - http://daily-it.blogspot.com.au/2008/09/solved-group-policy-client-side.html
Has no domain wildcard format info:
Behavior of Site to Zone Assignment List - http://blogcastrepository.com/blogs/mattbro/archive/2006/09/07/2183.aspx
Great article, no wildcard data:
Internet Explorer Policy Settings - http://technet.microsoft.com/en-us/library/bb457144.aspx
Internet zonemapping problem: http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/a8756a27-b562-42ad-8782-87d284e6bcfb/
Spiceworks Event 1085 (Warning) - http://community.spiceworks.com/windows_event/show/1582-microsoft-windows-grouppolicy-1085
Event ID 1085 — Application of Group Policy - http://technet.microsoft.com/en-us/library/cc727303%28v=ws.10%29.aspx
Application of group policy - http://technet.microsoft.com/en-us/library/cc727312%28v=ws.10%29.aspx
Evt ID 1085 GP client-side extension IE ZoneMapping failed to exec - http://www.winvistatips.com/evt-id-1085-gp-client-side-extension-ie-zonemapping-failed-exec-t706399.html
Event 1085 - Internet Explorer Zonemapping - http://www.minasi.com/forum/topic.asp?TOPIC_ID=29206
EventID.net - http://www.eventid.net/display.asp?eventid=1085&eventno=1412&source=Userenv&phase=1
Event ID 1085 - Internet Explorer Zonemapping failed to execute - http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_24897522.html
UPDATE:
I disabled the original policy and created a new one with only one trusted site address in it. Then I logged into a clean test machine did some testing.What I found after a few hours of testing was; regardless of the site that I have listed in group policy
The HKCU\Software\Policies\Microsoft\Current version\Internet Settings\Zone Map Key registry entry is
always updated with that entry on the workstation. So the workstation's registry always updates the key with
*.sitename.com per the site that I have set in GP
If I run GPUPDATE /FORCE over and over again, on the same machine, under the same user account, using the same DC I get:
Failure, Failure, Failure, Success, Success, Success, Failure etc
I wasn't able to determine any pattern to the failures, I tried stopping some of the processes on that machine but didn't find anything that would make it fail/succeed reliably.
There is no AV or firewalls installed on my test machine
Anyone have any more ideas? I think I might install filemon and try to capture some more data unless there's a better tool?

Yes, and that's straight from my Microsoft TAM. As long as you include an asterisk inside those site-to-zone mappings, you'll continue to see them. The key is whether or not they're working. In my environment, I've seen complete success using the
http://*.domain.com, or
https://*.domain.com, no matter if the site is http://www.domain.com or
http://milk.does.a.body.good.domain.com. Despite the success, we continue to see the errors. It's much the same as Group Policy Preferences where you can apply a setting once, or repeatedly. If you apply
something repeatedly and it's already set, lookout for some complaints in the application log. It really is annoying. There's potential to play with the logging levels, but I'll admit that my experience ranks as "novice" in this specific section of group policy.
This link might get the creative juices flowing:
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
I see you've already read a number of articles including "a test case for troubleshooting those event IDs"... I sympathize with your efforts. I despise warnings and errors that I can't solve or don't want to see, but I've researched a number of them to death
and found that many are simply "normal". Uggg... I hope this helps, but please take my advice, as with anyone else's out here, with caution. I've seen some crazy recommendations. I saw a recommendation to install SQL on a DHCP server to get failover clustering
up and running. I hope the guy asking for help didn't listen to that one! : ) - josh

Apply the default user logon picture to all users

Hi
I applied gpo "apply the default user logon picture to all users"
Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
C:\programdata\Microsoft\User Account Pictures\user.bmp --> renamed my company log to user.bmp.
Taken backup of old user.bmp.
But policy is not working.
Environment:
Windows Server 2008 R2
Clients:Windows 7 and Windows 8

Hi S.Vijay Kumar,
Based on my understanding, the GPO which configured the
Apply the default user logon picture to all users would not apply successfully. What’s more, you have customized the default user logon picture
%ProgramData%\Microsoft\User Account Pictures\user.bmp. Right?
Firstly, please check if the scope of this GPO and the setting of Filtering are correct.
Secondly, please follow the steps below to check if the GPO is applied to these Windows XP clients:
Click Start, type rsop.msc in the search box to access
Resultant set of policy.
Check if the GPO is applied to these clients and the setting of the GPO is correct.
In addition, it would be helpful for future troubleshooting if you could help to collect the following information:
Did the GPO fail to apply for all the computers or only some computers?
Can you set the user.bmp as the user logon picture
manually?
Regards,
Lany Zhang

Coldfusion 11 SSL Certs applied - The APR based Apache Tomcat library which allows optimal performance in production environments,

Coldfusion 11
Windows Server 2012 R2
Both the Coldfusion admin and additonal site work fine on HTTP.
As soon as I attempt to enable SSL websockets and install SSL certs, the Coldfusion 11 Application service will not start. I followed the steps below....
Coldfusion 11 - Web Sockets via SSL
The Coldfusion-error.log shows
Jan 26, 2015 3:21:23 PM org.apache.catalina.core.AprLifecycleListener init
INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path
Server was a cloned VM of the test server with developer copy of CF11, but license has been purchased and applied. SSL certs have been imported successfully, paths are correct in CF Admin to the cert file etc.
Do I need to install another version of Coldfusion to get around this issue or is there a download update I need to apply?
If i reconfig the \cfusion\runtime\conf\server.xml to comment out the SSL sections it works fine.
Any assistance welcome - I can't allow this site to made publicly available with using SSL.
SM

@Scott, first are you running update 3? If so, let’s clarify at the outside that, as that bug report (you point to) does indicate in the notes below it, there is a fix for a problem where this feature broke in that release. And as it notes, you can email [email protected] to request the fix (referring to that bug), or you can wait for it to be released publicly as part of a larger set of fixes.
If you are NOT on update 3, or you may apply the fix and find things still don’t work, I would wonder about a few things, from what you’ve described.
First, you say that the CF service won’t start, and you offer some lines from the ColdFusion-error log. Just to be clear, those particular error messages are common and nothing to worry about. They definitely do NOT reflect any reason CF doesn’t start. But are you confirming that that time (in the log lines) is in fact the time that you had started CF, when it would not start? I’d suspect not.
Look instead in the coldfusin-out.log. What does THAT log show at the time you try to start CF and it won’t start? You may find something else there. (And since you refer to editing the server.xml file, you may the log complains that because of an error in the XML it can’t “parse” the file. It’s worth checking.
You say also that you have confirmed that “paths are correct in CF Admin to the cert file”. What path are you referring to? There’s no page in the CF admin that points to the CACERTS file in which the certs are stored. Do you perhaps mean on the “system info” or “settings summary” page? Even so there’s still no line in there which refers to the “cert file”.
Instead—and this could be a part of your problem—the cert file is simply found WITHIN the directory where CF’s pointed to to find its JVM. Wherever THAT is, is where you need to put any certificates. So take a look at the CF Admin, either in the ”java and jvm” page (and the value of its “Java Virtual Machine Path”), or in the “settings summary” or “system information” pages and their value for “Java Home”. Is that something like \coldfusion11\jre? Or something like \Java\jdk1.7.0_71\jre? Whichever it is, THAT’s where you need to put the certs, within there (in its \lib\security folder).
Finally, when you say that if you “comment out the SSL sections it works fine”, do you mean that a) CF comes up and b) some example code calling your socket works, as long as you don’t use SSL?
To be clear, no, you don’t need any other version of CF11 to get websockets to work. But if you are on update 3, that may be the simple problem. Let us know how it goes for you with this info.
/charlie

Lighting effects not working, 'Could not apply the workspace because there is not enough memory (RAM)' with 4GB RAM?

Tried to use 'render/lighting effects' on 5 more or less new different laptops now. All kind of Window versions.
They all have at least 4GB RAM. The Graphic Card is compatible.
Layer to work on is RGB-Type.
It's all about Photoshop CC 2014, trial version.
When I go to 'Lighting effects' it says first:
'The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly.'
- I switched the 'Use Graphics Processor' on and off and restarted new - nothing happens.
- Video card is compatible.
Second it says:
''Could not apply the workspace because there is not enough memory (RAM)'
- RAM on all the computers I tested it with is at least 4GB
Please help!

We would need to know the amount of Video ram you have. If it is above 512 MB, then check for driver updates.
Windows OS
Click Start.
On the Start menu, click Run.
In the Open box, type "dxdiag" (without the quotation marks), and then click OK.
The DirectX Diagnostic Tool opens. Click the Display tab.
On the Display tab, information about your graphics card is shown in the Device section. You can see the name of your card, as well as how much video memory it has.
Once you know the kind of graphics card you have, visit the manufacturer's website to download the latest driver. Here are links for downloading drivers from the most common graphics card manufacturers:
NVIDIA: http://www.nvidia.com/content/drivers/drivers.asp
AMD: http://support.amd.com/en-us/download
Intel: http://support.intel.com/support/graphics/

Applying the corrections given in the SAPNOTE

Similar Messages

Maybe you are looking for