Appraisal Template - Issue with New Column addition.

We have added one column u201CPriority %u201D which replaced an existing field (column) in one of the appraisal templates.
When the user selects a value from the drop down and saves the template, it is not getting reflected in the portal. Also the same isnu2019t getting updated in the backend DB tables (as seen from PHAP_ADMIN_PA). Upon displaying the template, the first available value in the drop down is shown by default instead of the selected value.
As per our understanding the entire field values are read from standard function Module u2018HRHAP_DOCUMENT_CHANGE_STATUSu2019 into corresponding internal table t_body_elements.
But the value (Row X Column) for that particular column is not seen in the structure.
Please give inputs as to why the changed % value is not being saved and shown in the template.
The column is maintained in the template like the other columns and the value range is also maintained in the u2018Edit Appraisal Scalesu2019 in SPRO.
Thanks
RK

Hello Siddharth,
Thanks for you reply. Still the same issue. Following are the config I did till now:
In the PCD I created a new business object (SWF_WIOBN), an operation linked to the object (NAVIGATE).
I did create an iView (powl) in the custom folder, I integrated the operation within iView. I created a page that contains the iView.
In the properties of the iView I gave:
Application Name: HAP_MAIN_DOCUMENT.
Launch in New Window: "Display in separate Headerless Portal Window".
System: SAP_ECC_HumanResources
I added the required entries in tables:
IBO_C_WF_TTAS
IBO_C_WF_ACS
IBO_V_WF_TAC
IBO_V_WF_TTAC
etc...
I saw in the code of linked feeder class: CL_IBO_INBOX_FEEDER_WI that it's checking something called "Launch_Editor".. Is it a property that we can set somewhere?
Following are the parameters retrieved by system:
BO_NAME = SWF_WIOBN
BO_OP_NAME = NAVIGATE
LAUNCHER_PARAMETERS -> empty.??
BO_RESOLVE_MODE = USER_SET_OF_ROLES
LAUNCH_EDITOR empty where must be set?
At the end I still get the error:
There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator.
Any advice,
Thanks in advance

Similar Messages

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

Impact of new column addition to existing database

Hi,
I have a business reqt where in the existing table, I have to add a new column. Yet it is not finalised whether the column is going to be nullalble or NOT NULL.
But I would need a help to judge where all the addition of new column in the existing Db can cause a impact.
I know few things but need to know the complete picture:
1. dependent SP's would get invalidated ( specially with INSERT statement)
2.
3...
..and all those.
Please help.
Regards,
Aashish S.

As Satish pointed out the locking issue - I once saw someone lock up a whole application for hours because they added a new column with a default value on a large table because that took a DDL level lock on the table.
Also, if people have coded their inserts properly (using column names and values) then you should not have any problems with the order of column names even though the column is added to the end, unless you use DBMS_REDEFINITION.

Issue with new abap webdynpro INBOX EHP5

Hello Experts,
I'm currently working on the configuration of ESS/MSS services in EHP5. We are using different services like Appraisal OSA, Learning solution,etc. I already configured the Launchpad ESS, it's working fine but now I have an issue with the new Abap webdynpro INBOX. The employee and manager see their workitem notifications correctly in their respective inbox.(I'm calling application: IBO_WDA_INBOX that I integrated in my launchpad).
My problem is that when clicking on a workitem in order that it opens me the appraisal document (in edit or display mode), I got an error saying: "There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator."
I did some search on SAP help without any results. I'm wondering how should I register workflow tasks? I saw there is a table called IBO_C_WF_TAS (I added entries e.g:
IBO_WDA_INBOX TS99700031   EXECUTEAPPRAISALDOCUMENT).
I tried also to register all my custom tasks in transaction SWFVISU.
example:
TASK: TS99700013
Visualization Type: ABAP Webdynpro
APPLICATION:    HAP_MAIN_DOCUMENT
DYNPARAM   :    sap-wd-configId=HAP_AC_MAIN_DOC
NAMESPACE :    sap
SYSTEM_ALIAS: SAP_Webdynpro_XSS (I did create a system in sap portal under System Administration with as AS property /webdynpro/dispatcher )
Could you let me know what could be wrong, what I missed? Shall I create an iView, if yes which one? which properties?
I would really appreciate any help.
Thanks!

Hello Siddharth,
Thanks for you reply. Still the same issue. Following are the config I did till now:
In the PCD I created a new business object (SWF_WIOBN), an operation linked to the object (NAVIGATE).
I did create an iView (powl) in the custom folder, I integrated the operation within iView. I created a page that contains the iView.
In the properties of the iView I gave:
Application Name: HAP_MAIN_DOCUMENT.
Launch in New Window: "Display in separate Headerless Portal Window".
System: SAP_ECC_HumanResources
I added the required entries in tables:
IBO_C_WF_TTAS
IBO_C_WF_ACS
IBO_V_WF_TAC
IBO_V_WF_TTAC
etc...
I saw in the code of linked feeder class: CL_IBO_INBOX_FEEDER_WI that it's checking something called "Launch_Editor".. Is it a property that we can set somewhere?
Following are the parameters retrieved by system:
BO_NAME       = SWF_WIOBN
BO_OP_NAME = NAVIGATE
LAUNCHER_PARAMETERS -> empty.??
BO_RESOLVE_MODE = USER_SET_OF_ROLES
LAUNCH_EDITOR empty where must be set?
At the end I still get the error:
There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator.
Any advice,
Thanks in advance

Issue with new itunes version

Dear All,
i have a really big issue with the new itunes version. I loaded it today. Besides that every single view changed...
So coming to my issues:
1. my playlists changed to a status of Middle of 2011
2. the songs which i loaded since that and are already on my hdd are only available in the icloud... means to listen to it or to put it to a playlist, means that i would have to load the songs again.... which in my case means 660 Songs.... downloading again on my hdd (means roundabout additional 9 GB of data) and last but not least paying for the 9 GB download...
Is there any chance to link the songs in the playlist again on my hdd, i mean they are still there and i already loaded it down ?!?!?!?!?! In the past it was possible
Hope somebody can help me... and please apple tune back.... itunes is not an easy to use interface anymore... and honestly after having 3 Ipods, 1 Pad and 2 iphones and von itv, i should think about changes... it is already the second time that Itunes completly destroys my playlists and costs me more money.....
HELP!!!!!!
Thax in advance
Masta1701

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

RTF templates- Issue with inconsistent outputs

Hi All,
I have an issue with rtf templates.We are on XML Publisher 5.6.3 with EBS with Bursting.Bursting is set at G_HEADERS in the contorl file.
I am using the <?start@last-page-first:body?><?end body?> function.It displays amount total for single page output and amount total only on the last page for multiple pages output.The above logic works perfectly when I have single header data in the XML file(single G_HEADERS).
<XX_MAIN>
-<LIST_G_HEADERS>
<G_HEADERS>
Lines Data(tree sub levels)
</G_HEADERS
<G_HEADERS>
Lines Data(tree sub levels)
</G_HEADERS
<G_HEADERS>
Lines Data(tree sub levels)
</G_HEADERS
</LIST_G_HEADERS>
</XX_MAIN>
However when there are multiple headers(G_HEADERS) in the same XML data file at the same tree level, all the outputs get generated as minimum 2 page outputs.Even though the data fits in 1 page for some of the G_HEADERS, it shows continued on the first page and just prints the total on the last page along with the header.
I appreciate your help with this.
Thanks,
Lavina

Hi,
I'd like to know if anyone out there has come across this issue before..
Thanks
Lavina

ALV Report Output Print issue with more Columns

Hi Experts ,
I'm facing an issue while printing an ALV report which has around 22 columns .If i reduce the column display in the code . I'm able to print but not with 22 columns.. I have used Line-size = 1023 and line-count = 60 , but still the problem persists .
I also searched in SDN with similar issue but managed to get only the above solution which is not working .
Any other ways of doing it , kindly suggest .
Many Thanks,
Kumaran

175 characters is the maximum number of characters that can be generated in a line of a spool (next characters are stored on the next line of the spool). When the spool is printed, these line feeds are respected.
What is possible (I don't know) is that ALV chooses its own format type instead of the format type you have chosen when you run your program in background. To check that, just look at spool attributes (SP01).

How to create a table from an existing table with new column

Hi !
Please help me.
I want to create a table from an existing table with data and add two new column to the new table.
What will be the syntax?

craete table new_table as select a.*, 'somevalue' new_col1, 'somevalue'
new_col2 from old_table a;Also there is a pitfall - newly created table will accept column type and precision from the select statement, so further you can be needed to modify columns
if you want to have VARCHAR2 instead of CHAR for example:
SQL> create table new_dept as select dept.*, 'New data' new_col from dept;
Table created.
SQL> desc new_dept
Name                                      Null?    Type
DEPTNO                                             NUMBER(2)
DNAME                                              VARCHAR2(14)
LOC                                                VARCHAR2(13)
NEW_COL                                            CHAR(8)
SQL> alter table new_dept modify (new_col varchar2(8));
Table altered.
SQL> desc new_dept
Name                                      Null?    Type
DEPTNO                                             NUMBER(2)
DNAME                                              VARCHAR2(14)
LOC                                                VARCHAR2(13)
NEW_COL                                            VARCHAR2(8)Rgds.
Didn't see michael's post - it reflects the fix for this problem using CAST.
Message was edited by:
dnikiforov

Idoc flatfile to IDOC xml issue with new PI7.11 module SAP_XI_IDOC/IDOCFlat

Hi,
I am trying to develop a scenario as mentioned in the blog using the new module available in PI7.1,but I am getting this error
"Error: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ORDERS05" is unavailable."
I have made every configuration correct and IDOC meta data available in both SAP R3 and PI,but it is still complaning about the meta data does not exist.
Blog: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13743%3Fpage%3Dlast%26x-order%3Ddate
did anybody face issue with the new module available "SAP_XI_IDOC/IDOCFlatToXmlConvertor",please help me or give me mre information why I am getting this meta data error.
Thank you,
Sri

Hi Sri,
To Convert IDOC Flat file into IDOC xml from the given blog, the IDOC flat file should be present in standard format like:
E2EDK01005                    0000047110815000000000001.........
E2EDKA1003                    0000047110815000000000002.........
E2EDKA1003                    0000047110815000000000003..........
E2EDKA1003                    0000047110815000000000004........
The Flat file have relationship as IDOC Number "000004711081500000" and segment sequence "0000001".
If your flat file is not in this formate so i don't think that module is able to convert into IDOC xml. and if your file is already in this format then it may be issue with destinations which are created in NWA.
Thanks
Harish

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

I have them go to the correct site:
plugin download page on Interoperability Bridges.
My only options are:
1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
This only pertains to any student who has never had Firefox on their computer prior to 11.
Thanks in advance.

I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

Quality issues with new Mac Mini 09?

I've been itching to hit the 'buy' button -- but in reading the many postings about the new Mac Mini, I'm seeing lots of issues with the bluetooth ... *wireless signal* ...
Is there anyone who's not experiencing any problems?
Sounds like it may be a hardware issue with connections... the last thing I want.
My other choice is the 2008 Mac Pro which seems trouble free.
What do you think?
Thanks.

There is a general issue/trend with the new Mini. There are plenty of reports in these forums and the news has begun to hit the wider press; I guess this is more important to a company with only 2-3% desktop share than posts to these forums. I went to the Genius Bar on Saturday and they have now lodged an official bug report with Apple. It looks like the Mini cannot pair with more than one HCI device. So if you pair with the mouse first the keyboard won't work and vice-versa. They don't think the Mini hardware is broken but that we will just have to wait for Apple to fix the firmware.
Where I do agree is that some issues are OS-X 10.5 related and can therefore affect all Macs. The WiFi has issues where it randomly drops, it doesn't seem able to re-connect at all to channels above 13 and only manually to channels below 12. The system resume function is unreliable. All these started when we moved from 10.4 to 10.5 and so far they have not been addressed. One issue is that there does not appear to be a way for users to log bug reports, except when software crashes. However, the bluetooth issues on the Mac do appear real and are either firmware or hardware related.

ISSUE WITH NEW VERSION OF BLACKBERRY MESSENGER ON DIFFERENT BLACKBERRY PHONES

Dear Madam / Sirs,
I would like to seek assistance in resolving an issue with my BLACKBERRY TORCH 9810 I installed the new version of BLACKBERRY MESSENGER on my phone and it does not work on WIFI ONLY MODE.
For example I traveled to Mexico and Panama and was on a WIFI ZONE with open access and tried to use my BLACKBERRY MESSENGER and it did not work...I tried to deleting the application and installing a previous version but was not possible. The same issue occurs on a different BLACKBERRY phone that it was working perfectly...but after updating to the new version of BLACKBERRY MESSENGER it did not work.
Please help me resolve this issue.
Thanks in advance
Polk Marin
E-mail: (personal info removed)@yahoo.com

and what version do you have installed? I dont see this on ver 6.2.0.56
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

Appraisal Template - Issue with New Column addition.

Similar Messages

Maybe you are looking for