Approval Procedure - SAP loses the changes to the document

Good morning to all.
I need an explanation regarding the approval procedures.
We have recently upgraded the system from version 2007 SP01 PL10 to version 8.81 PL10.
We have a approval procedure whit 2 level:
User A => Create the document
User B => First level approval.
If User B approve the document then
User C => Final level approval
I noticed that in the previous version, during the phase of approvals, was created a single record in the table ODRF. This record was updated with various changes made by users during the approval phase. The changes made during the approval phase regarding UDF
Now, with the new version, I find myself with the table ODRF registering a record for each change made to the document that is pending approval.
So, if User B open the document pending approval, saves it as a draft, then edit some UDF and still saves as a draft, in ODRF table we have 2 line (the first for the first save, the second for the UDF edited and so on...)
But, when you invoke the document itself to approve or modify it, it always loads the first record from the table ODRF, thus losing all the changes.
Do you have news about this situation? Are there solutions?
Sorry for my english...

Hi GORDON.
Thank for your reply
After talking with our partners, I confirm that version 8.81 is not possible to make changes to the UDF fields in a document during the approval phase.
More precisely, the changes can be made, the document can be saved as a draft during the approval procedure, but at the time of approval, the changes are not shown.
This is because, in the drafts table (ODRF), unlike what happened in the 2007 SP01 PL10 and even in version 8.80, the changes are saved in other records (line) with other draft number ID respect to the original record, and therefore no longer recoverable and / or visible .
And, I do not understand why, there is no trace in any official document about SAP to that change.
Sono incazzato....

Similar Messages

I have a workflow transaction which got timeout and escalated to the next level. The comments in the approver's notes are just changed by the system in doing so. For eg: "Moving John under Michael" gets changed into "Moving+John+under+Michael" during the

I have a workflow transaction which got timeout and escalated to the next level. The comments in the approver's notes are just changed by the system in doing so.
For eg: "Moving John under Michael" gets changed into "Moving+John+under+Michael" during the timeout/reminder notification. Any idea ?
-Thanks,
Arun

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Track the changes to the batch jobs in the PRD system.

Hello Basis Guru's,
Need your help in a Query. --> Is there any best practice that can be implemented to trace all the changes done to batch jobs in the past 3 months and going forward. Be it in its scheduling or its variant changes etc, i would like to track the changes to the batch jobs in the PRD system.
Any pointers would be really helpful.
Thanks in advance.
Rgds,
Sri

Hello Raghu,
Third party tools can only help you but not SAP. . A lot of us may think that for example if a Job 'X' runs daily then SAP considers this job as a single object.However actually SAP will treat each run of a job seperately infact as seperate jobs. If you would have noticed each job in SAP has a job id which is unique. So actually each run is unique. Now change logs can exist for only those objects that get changed. But change logs can not exist for objects that are newly created everytime !!
If you would have noticed you can two jobs with the name A but running two different reports/variants whatver. This is because job name is not that important it is the job id.
Every time a job runs a new entry gets stored in TBTCO,TBTCP etc.. tables. It is not that the existing entires are updated.However yes when a job is scheduled periodically there is some kind of a link that is created in the job series but it does not showo up in any of the tables!!
As far as 3rd party tool is concerned I can name a tool like UC4. UC4 has its own database in which the job name will always be unique. For that you can easily find change logs. I think Chronicle (Redwood Scheduler) also supports this.
Regards.
Ruchit.

Is there a way to remove the changes to the URL Bar, specifically the status information and the target URL?

To begin, I utterly despise the changes to the URL Bar and the removal of the Status bar. In order to stay with the latest version of Firefox I am attempting to recreate the look and feel as best I can.
I have already installed the Status-4-Evar extension. The only thing that remains is to remove the status information and the target URL from the bar.
Are there any settings in about:config that will allow me to make these changes?
EDIT: Status information can be removed by toggling. status4evar.statusInUrlBar. Still looking for a way to remove the target URL...

This code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line seems to remove the links that appear on hover.
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
.urlbar-textbox-container {color: inherit !important;}
.urlbar-textbox-container-children {opacity: 1 !important;}
.urlbar-over-link-box {opacity: 0 !important;}
</nowiki></pre>
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

An error occurred applying the changes to the Distributor?

I'm trying to create a new Oracle publisher but I always get the following error. I already dropped the old publisher using exec
sp_dropdistpublisher @publisher='old'. (However, the dropping get errors now (http://social.msdn.microsoft.com/Forums/en-US/home?forum=sqlreplication)).
TITLE: Distributor Properties
An error occurred applying the changes to the Distributor.
ADDITIONAL INFORMATION:
SQL Server could not enable 'newpub' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The Oracle server [newpub] is already defined as the Publisher [old] on the Distributor [MyServer].[distribution]. Drop the Publisher or drop the public synonym [MSSQLSERVERDISTRIBUTOR]. Changed database context to 'master'. (Microsoft SQL Server, Error: 21646)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=10.00.4000&EvtSrc=MSSQLServer&EvtID=21646&LinkId=20476

Hi,
As the error message, I would suggest you manually clean up Oracle replication objects created by replication:
1.Connect to the Oracle publisher with DBA permissions.
2.Issue the SQL command DROP PUBLIC SYNONYM MSSQLSERVERDISTRIBUTOR;.
3.Issue the SQL command DROP USER <replication_administrative_user_schema> CASCADE;.
More information, see “The Oracle Publisher Is Associated with Another Distributor” section in the
Troubleshooting Oracle Publishers
Thanks.
Tracy Cai
TechNet Community Support

The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side?

The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side? Also the the Mozilla Firefox tab on the upper left hand corner changed.
Its was a red colored tab and now its blue in color. I did not change any thing!

Hey jimmiet,
There were some recent ui changes around the downloads manager. What version where you on before? Anyway, you can customize things in Firefox really easily. Take a look at [[Customize Firefox controls, buttons and toolbars|this article on customizing Firefox]] for details. Should be a piece of cake to move the bookmarks button.
As for the color of the button, you might be in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing]] mode. That changes the color of the button from orange to a purplish color.
Matt

Track the changes in the entries of the table

Hi,
How to c when and by whom the stnadard table has been modified.
Through SPRO some changes are done which are getting reflected in a standard table.
Though Log data changes in the technical settings of the Table in se11 is checked, im not able to c the changes using the tcode scu3.It displays "No logs Found" .
I tried to search the tables CDHDR and CDPOS,but of no use.
Please give some inputs in this regard.
Thanks in Advance.
Dharani.

Dharani,
Just some additional info:-
Open the table in SE11.
go to Utilities in the Menu bar
click onVersions- versions management
You will be able to see the current active version which is indicated by a tick mark in the extreme left.
Down that you will be able to see the previous version
Now select this previous verion.(i mean tick it).
press f8 or the button with two down arrows to compare.
In this way you will be able to see even the modification too which are highlighted.
The same applies to programs in se38 too.
K.Kiran.

Does Universal Connector read only the changes or the whole of the database everytime

Does the Universal Connector read only the changes in the external database into the Connector View every scheduled cycle or does it read the whole of the database into the connector view every time ?
I need to write a indirect connector for Lotus Notes database using the universal connector and univeral text parse.So I want to know if the Import and Dump scripts that I will have to write will have to read just the changes that took place or the whole of the Notes DB everytime ?
-Aparna

If it is possible to get just the changes then do that.

What is the command to check the changes in the spanning-tree topology?

What is the command to check the changes in the spanning-tree topology?

Hi,
Few commands which would help are:
1- Show spanning-tree detail
2-show spanning-tree detail | in ieee|from|occur|is exec >> This will give from were the changes occuring- Ex:
C6K1#show spanning-tree detail | in ieee|from|occur|is exec
VLAN0001 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 9536 last change occurred 00:00:29 ago
from GigabitEthernet4/6
3- show spanning-tree active *& show spanning-tree root >> Will give you the root information.
4- show spanning-tree inconsistentports >> If there are any port which are inconsistent state due to STP features.
STP running MST:
===============
show spanning-tree mst configuration >> Need to check and match the same outputs with the other switches running in the same MST domain/region.
show spanning-tree mst detail
show spanning-tree mst <name of the region>
Debug on STP:
============
debug spanning-tree events/bpdu >> would be good but to be run with more cautious.
HTH
Inayath
*Plz rate if this info is usefull.

How refresh the changes in the document templates?

Hello all,
I have a doubt. Within our Solman, in a project template, we have created a template documents about standards. Now we have made changes to these templates. My doubt about this is whether there are any way to refresh the documents and facts from these templates. Can we force this 'update'?
Thanks in advance!

Hi Laia,
Let´s assume you are talking about MSWord documents.
When you create a new MSWord document it takes into consideration the Normal.dot file that is located on your PC to bring you with all formatting you previously set in this MS template file ( paragraph styles, fonts, colors, headers, footers, images, etc ).
When you sabe this new document, it starts "its own life". that is, if you move the file from your PC to another PC, it will not have the modifications you make on your local Normal.dot into consideration.
On the other hand, if you maintain the file on your PC and change the Normal.dot, depending on the change, than you will be able to see the change in the created document based on this template.
When you create a new document ( no matter if from template on solman or from scratch on your PC ) and upload it into solman, then you are working like in the case you move your file to other PC ( the connection to the template is broken ).
Other thing to take into consideration is that the Normal.dot is seen by MSword as a real template, while the document created from a template on solman is just a copy of an existing document, saved as a new file in another location.
Regards,
Val

Apply the change to the table

I want to set up a stream to capture, propagate and apply the changes on the table TB in DB1 to the table TB in DB2. Both tables are the same name and structure.
If the value on column1 of DB1.TB is y, issuing the UPDATE statement
update DB1.TB set column1 = x
will replace y with x.
However, at destination DB2.TB, column1 has the value
z = sum(column1) of DB1.TB,
the chnage at source table (x-y) will need to be added onto the column at DB2.TB, making it z+(x-y).
Any idea on how to use the rule or handler to realize this transformation?
My understanding is that we shouldn't query the DB2.TB in the rule / handler function. Correct me if I am wrong.
Thanks for any help.
Eugene

Hi Eugene,
I haven't seen a requirement/best practice that you shouldn't query the target table in the dml-handler. And in the contrary of table-triggers there's no 'mutating table problem' in here, because of the source of the event. I can't see any functional problems in querying the target table. You should even be able to query the source database over a database link. If any streams-guru has an other meaning I'm interested in hearing it. The only thing you should bother about is the performance in this. Since the dml-handler is a peace of code executed by the apply process it slows down the applying of the event. If you implement 'heavy' functionality by doing all kinds of queries then it's like driving with your foot on the brake. If your source table is suffering from lot's of mutations then your capture process might not be able to post its events to the apply process, causing spilling of events.
In that case it's better to let your apply process enqueue its events on a seperate queue (there is an method for in I thought the dbms_apply_adm package or the dbms_streams_adm to add a seperate queue to the apply process). Then the LCR changes into a Custom-enqueued-event that can be dequeued from a custom-process. Then you can create a seperate dequeue-process that you can schedule with in dbms_job/dbms_schedule that does the applying of the changes.
Regards,
Martien

[svn] 3839: Update the channel url to reflect the change in the runtime channel

Revision: 3839
Author: [email protected]
Date: 2008-10-23 07:42:37 -0700 (Thu, 23 Oct 2008)
Log Message:
Update the channel url to reflect the change in the runtime channel
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-manual/ajax/messaging/TextMessageRuntimeDest.html

Many ways to do this. The easiest is to have a method in one of your classes that reads the data from the database and creates all the proper structure under a RootNode and then returns that RootNode.
Whenever you want to refresh the tree, just call that method to recreate the root node (and all the underlying structure/nodes) and then re-set the root node of your tree model using the setRoot() method. That will cause it to refresh the display given the new root node.
Once you have that working, you can get fancier and make it more efficient (only updating/firing events for the nodes that actually changed, etc).

I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the " " sign in front of them

I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the " " sign in front of them

I was adding songs to and existing playlist and now I can't save the changes to the playlist. What do I need to do to save the changes? All my music have now the "+ " sign in front of them

HT5622 I have incorrectly entered an email address that is not valid. I have requested the change to the correct email but if cannot verify it as the verification email is being sent to the email address that I entered incorrectly and is invalid. Help!

I have incorrectly entered an email address that is not valid. I have requested the change to the correct email but if cannot verify it as the verification email is being sent to the email address that I entered incorrectly and is invalid. Help!

Hey Givemepaperandapen,
Thanks for using Apple Support Communities.
For more information, take a look at:
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
How to edit or change your Apple ID and primary email address
Have a nice day,
Mario

Tecra A9 - What are the changes in the new Bios update

Can someone tell me the changes in the actualy BIOS Update v1.70 and the old ones?
And is there a PDF outside where i can see the detailed description about the Bios functions?
Thanks
Greetings

So, until now my question has no answer!
In the US Forum is the Service from Toshiba is much more better ->
[BIOS details|http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1978903&moid=1702318&rpn= PTS53U&BV_SessionID=@@@@2130665852.1205800119@@@@& BV_EngineID=cccjadedikgfkdgcgfkceghdgngdgmn.0&ct=D L&all_docs=false]
I also must send my Tecra A9 to the support to change my DVD-Burner (Teac) and it taks 3 Weeks.
I am not very happy with this support at all!
Now Toshiba has released a new Bios Update v2.10 and i didn't now what are the changes.
Greetings

Approval Procedure - SAP loses the changes to the document

Similar Messages

Maybe you are looking for