Approval workflow error when creating a new custom entity in FIM 2010 R2

Hello,
i'm hoping somebody here can help, me i've been struggling with this for some time now. On a fresh FIM installation i create a custom entity named "Role" and add a few custom attributes.
I then create an approval workflow and MPR for normal users to create entities of type Role, but another user must approve this request. The other user has a working mailbox - i've tried firing an action workflow that sends a mail notification when someone
creates a new role and it is working fine. But, when i enable my approval workflow (the only field i changed from default is the approver) on the MPR, the workflow always failes with the message:
Error processing your request: The operation was rejected because of access control policies.
Reason: The server workflow rejected the operation.
Attributes:
Correlation Id: 750a558a-d3e4-4216-b16a-e76d79f011ec
Request Id: feaabbc9-dea4-49a3-8b29-65b77de6f8fd
Details: The Workflow Instance '04202cc0-14a3-410c-a3fc-2d6e5d25ebe6' encountered an internal error during processing. Contact your system administrator for more information.
I enabled tracing and this is what i found:
Microsoft.ResourceManagement Verbose: 0 : Creating WorkflowServiceHost for XOML Definition:\n<ns0:SequentialWorkflow ActorId="00000000-0000-0000-0000-000000000000" RequestId="00000000-0000-0000-0000-000000000000" x:Name="SequentialWorkflow"
TargetId="00000000-0000-0000-0000-000000000000" WorkflowDefinitionId="00000000-0000-0000-0000-000000000000" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:ns1="clr-namespace:System.Workflow.Activities;Assembly=System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856
    ThreadId=8
    DateTime=2013-09-04T15:17:10.0496188Z
Microsoft.ResourceManagement Information: 1 : 1 : : Invalid Element 'ReceiveActivity.WorkflowServiceAttributes' found while deserializing an object of type 'Microsoft.ResourceManagement.Workflow.Activities.ApprovalActivity'.
    ThreadId=8
    DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Information: 1 : 1 : : Invalid data found while deserializing an object of type 'Microsoft.ResourceManagement.Workflow.Activities.ApprovalActivity'.
    ThreadId=8
    DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Verbose: 0 : A WorkflowRuntime is not available for this WorkflowDefinitionVersionKey '20'.
    ThreadId=8
    DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Error: 3 : Workflow host activation failed for workflow definition id : 231457c6-d044-4cc7-839f-98e5cf88f514, version key: 20. Exception: Object reference not set to an instance of an object.   at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.ActivateHost(ResourceManagementWorkflowDefinition
workflowDefinition, Boolean suspendWorkflowStartupAndTimerOperations)
   at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.RetrieveWorkflowDataForHostActivator()
    ThreadId=8
    DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Information: 1 : The service has updated the list of active hosted workflow definitions to sequence number '1'.
This happened on two separate FIM deployments, but both of them were set up in the same way. What am i missing here?
Thank you,
Martin

(...) What am i missing here? (...) - Sharepoint 2013 and probable bug in FIM related to it. Check this thread for workaround
and resolution:
http://social.technet.microsoft.com/Forums/en-US/1b76672d-1276-4c71-b9fc-5bb1fcb36877/event-id-3-with-approval-activity?forum=ilm2
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

Similar Messages

Runtime Error when creating a new group

I'm getting a runtime error when creating a new group on a site collection?
Thanks in advance

The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
Also Ensure the group name is not having any special/unsupported characters.
Feel free to share the error screenshot/entry in the ULS logs.
Please remember to click 'Mark as Answer' on the answer if it helps you
Best Regards,
Pavan Kumar Sapara
s p kumar

User getting error when creating a new Document Library

The user is getting the following error when trying to create a new Document Library in SharePoint 2010:
Error
Cannot complete this action.
Please try again.
Correlation ID: 37ecd5eb-6129-4fa3-84bd-c6f0ad8115d5
Has anyone come across this error and know how to resolve it?

Hi,
According to your post, my understanding is that the user could not create a document library.
To narrow down whether the issue is related to the user permission, you can check which permission the user has.
You can also assign the user full control to check whether it works.
What’s more, did the issue occur in other sites? You can check with other sites or create a new site to check whether it works. Maybe the site has been corrupted.
To quickly and accurately find the issue, I recommend you can check the event log and ULS log to see if anything unexpected occurred.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Error when creating a new Organization in Deployment Manager

I am trying to create a new Organization to an existing CRM environment and I keep getting the error below. The user deploying the new Organization has full control on all the security groups and Admin rights on the servers that Host SQL and CRM
application. The CRM environment is 2011 on Premise that has been setup for IFD.
We currently have 2 other organizations that are already in the environment, so the new org would be a third. I am more than glad to provide any firther information that I have to anyone that can help us resolve this issue. I also have a log file that I
saved after the failed creation attempt. I can provide the contents of the log file to anyoen who can help. Its too long to add here.
The section of the log file that shows the error is just above the screen shot. It looks like a deletion error. My queston is why is there an attempt at deleting anything if all I am trying to do is create a new Organization. This is not an import or
upgrade.
15:03:16| Error| System.Exception: Action Microsoft.Crm.Tools.Admin.ImportDefaultDataAction failed. ---> Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query: delete from [ConnectionRoleObjectTypeCodeBase]
OUTPUT DELETED.[ConnectionRoleObjectTypeCodeId], 3233
into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
where ([ConnectionRoleObjectTypeCodeId] = '952fda76-2f70-e411-bfa3-005056b10f95')

Hi All,
I am also getting similar error
Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query:
delete from [CustomerAddressBase]
OUTPUT DELETED.[CustomerAddressId], 1071
into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
where ([CustomerAddressId] = 'fbb57633-a54f-e411-80ca-005056947598')
I am getting this error when I am trying to delete all existing customer address and then try to create a new address for a customer.
So its a kind of blanket update to all existing one replaced with new one.
Please let me know if any one having solution to this

Error when creating a new Portfolio

Hi guys,
When I try to create a new Portfolio, I get the following error message:
"The value of the mandatory input field Portfolio Type is initial"
This error occurs in spite of the field being populated with a valid Portfolio Type.
Can anyone advise what is causing this error, please?
Regards,
Richard Cook

Hi Richard,
I have never seen this error. Are you using a custom portfolio type or one that is configured in PPM by default (ADM, IT...) ?
Check this using for example ADM .....but realy your issue it is very extrange,
Other thing you can do is create the protfolio using transaction RPM_DX_PORTFOLIO.
I hope this can be useful
Regards,
Sara

Error when create a new asset ----ASSERTION_FAILED

Hi,
I have installed EHP4 FOR SAP ERP 6.0 / NW7.01 and when create new asset with AS01 and try to save the system show me the next runtime errors:
ASSERTION_FAILED" " "
CL_FAA_CFG_DEPRAREA_ERP=======CP" or "CL_FAA_CFG_DEPRAREA_ERP=======CM009"
SETDATA_DERIVATION"
What happened?
    In the running application program, the ASSERT statement recognized a
    situation that should not have occurred.
    The runtime error was triggered for one of these reasons:
    - For the checkpoint group specified with the ASSERT statement, the
      activation mode is set to "abort".
    - Via a system variant, the activation mode is globally set to "abort"
      for checkpoint groups in this system.
    - The activation mode is set to "abort" on program level.
    - The ASSERT statement is not assigned to any checkpoint group.
I have implemented the note 325531 but no result.
Do you have any ideea?
Regards,
Ionel

Hi all,
I have the same problem. I have executed the report RACORR11 mentioned in OSS note 325531 but no changes I still get the dump when I want to save the asset. In my system the report RACORR122 is not available. In the customizing system the asset creation works fine w/o dump but in the test system I get the dump. I have compared the derived depreciation areas in table T093B in customizing and test system and there are the same entries. All transports have been transported from customizing to test system.
Does anybody have any ideas whatelse can be done to overcome the dump?
Thanks, Christopher

SCSM Authoring Tool verification error when creating a new property

I am needing to add several new fields to an existing customized ServiceRequest Extended Form. Using SCSM I exported the management pack (as a bundle) and then used PowerShell to export to a .xml. Now when I open the class and try
to create a new property I get an error stating:
The management pack could not be verified due to this error:
Verification failed with 1 errors:
Error 1:
Found error in ...servicerequestextendedform.category with message:
The Target attribute value is not valid. Element ....ServiceRequestExtendedForm.Category references a Target element that cannot be found.
I am very new to this. Any help would be greatly appreciated!

you probably want to go back to original sources, rather then exporting from Service Manager, since the export will break any sealing and might cause issues when authoring or resealing.
You'll also need :
a Sealed version of the class extension, since this is going to need to be loaded into the authoring tool before you see the extra properties,
an unsealed copy of the MP that contains the form customization, so you can edit it
the original key used to seal the current customization, so you can seal the upgraded form using the same key so it will upgrade the MP correctly in your production environment.
The specific error you're running into looks like a MP reference error, but it's hard to be sure without seeing the original XML. i'd make sure that you have opened the sealed versions of any other MPs this MP depends upon.

Getting error when creating the new application

Hi Sandeep,,
wen iam creating the new application iam getting
An error occurred while processing this page. Check the log for details.
where shud i have check log details..
i have given the following iputs
in select tab:
datasource name :oradsn
calender:
custom:
prefix tp
perids per year 13
application;
test
description:
example
shared service project
unassinged
instance :newinstance
calender
Select the default currency for viewing data in the application.
Default Application Currency
USD $ United States of America dollar
Will your application support multiple currencies?
no
Standard Plan Types Name
Plan Type 1
could you please let me know the solutions for this
thanks and best regards,
Kishore

1. As you are taking service, your database is oracle database, you might have created a user/schema .
2. When you are creating FDM application and that too providing details of database , there is a button 'options',which has more options like tablespace..etc.
3. If you have created a schema and it has a specific table space ,then you need to provide these details also.else, while creating a user, if you have selected everything as default, then no need to go to 'options'.
Thankx
Nick

Publishing Approval Workflow breaks when created

When I attempt to create a Publishing Approval Workflow I receive the error message: This form cannot be opened in a Web browser. To open this form, use Microsoft Infopath.
This doesn't even have to be on a list that has been created with infopath. I tried to create a workflow on a simple list and received the same error message.
Let me also say that Publishing is enabled as well as the workflow. It shows as being active too.
To compound matters when I look at the correlation ID error message in the logs I get some real strange errors that I am not sure how they are related.
The first message shows the correct site page and the list id:
Name=Request (POST:http://myserver.com:80/Emp/Health/_layouts/CstWrkflIP.aspx?List=%7BCC7A77B8-BAF9-47B3-82C4-592C66F04D35%7D)
The next one is throwing me off completely:
CreatePageFromUrlNoUpperCase failed with ArgumentException. Url = '/SUPPORT/ED/TEAM/SITEPAGES/HOME.ASPX'.
The High Level Message says:
Leaving Monitored Scope (CachedObjectFactory: Caching Page at: /SUPPORT/ED/TEAM/SITEPAGES/HOME.ASPX). Execution Time=21.8362948363549 What does this page even have to do with the workflow?! I'm beyond confused so I am hoping somone out there
will know where this is coming from.
Jennifer Knight (MCITP, MCPD)

Hi,
From your error message, I suggest you disable the publishing approval workflow, then enable it again, check the result.
Thanks,
Rock Wang
Rock Wang TechNet Community Support

Error when creating a new project in sharepoint

I am getting this error "Failed to create site. A duplicate field name "workflow_history" was found" when I am creating a new project on share point.
Can someone help me identify and fix this issue exactly.

Check if below helps
http://zimmergren.net/technical/sp-2013-duplicate-field-name-was-found-after-upgrading-your-sharepoint-2010-solutions
http://jshidell.com/tag/finding-a-duplicate-field-name-was-found-error-in-sharepoint-2010/
http://www.sharepointassist.com/2011/11/05/a-duplicate-field-name-x-was-found/

Error when create a new Project

Hi all
When I create a new Project, system appear:
"No settlement rule exists for object number PD00000035
Message no. KD023
Diagnosis
There is no settlement rule for object PD00000035.
Procedure
Please enter an object for which there is a settlement rule."
Could you please tell me about this error and how to repair.
Regards,
Thang

Maintain settlement rule for the object. It seems as per the settlement profile, settlement is mandatory.
Select object in CJ20N and press CTRL+F3...maintain the distribution rule.
Venkat

Error when creating a new Data Source

All, This is on BI Publisher 11g.
When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
what am i doing wrong?
Thank you for reading this post.
Thanks,
R

The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM

Error when creating a new JMS connection factory in GlassFish V3 b57

When I use the admin console and try to create a new JMS connection factory in GlassFish V3 b57, the operation fails with the error message
An error has occurred: Can't find ConfigModel.Property for attr -connection-validation-required on interface com.sun.enterprise.config.serverbeans.ConnectorConnectionPool
Should I better report this in the GlassFish news forum (http://forums.java.net/jive/forum.jspa?forumID=56&start=0)?
p.s. I launch the admin console from within NetBeans 6.7.1 (the server started before the IDE). WIth version b 56, creating a JMS connection factory worked fine.
Best regards,
Michael Justin

This bug does not apear in the nightly build (b58) now so everything looks fine again.
Greetings,
Michael

Error when creating a new user_id

Hi, i am using this code to create a new user
begin
fnd_user_pkg.createuser
(x_user_name => 'myappuser',
x_owner => 'CUST',
x_unencrypted_password => 'genius2011',
x_start_date => sysdate,
x_end_date => NULL,
x_description => null,
x_password_date => sysdate,
x_password_lifespan_days => 45,
x_email_address => null,
x_employee_id => 1336
end;
in deed, the user_name is new and the employee_id has no user.
i got a warning message: "the user name is already in use" and when i try to save a new user name with the user definition form i got this message "APP-FND-01206: This record already exists. You have entered a duplicate value or sequence of values that must be unique for every record be unique"

could you please take a look
Error que empieza en la línea 1 del comando:
begin
fnd_user_pkg.createuser
(x_user_name => 'ADRIANA.GARCIAC',
x_owner => 'CUST',
x_unencrypted_password => 'welcome1',
x_start_date => sysdate,
x_end_date => NULL,
x_description => null,
x_password_date => sysdate,
x_password_lifespan_days => 45,
x_email_address => null,
x_employee_id => 13366
end;
Informe de error:
ORA-20001: APP-FND-02600: Unable to create user ADRIANA.GARCIAC due to the following reason(s):
This user name is already in use. Please enter a unique user name..
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.FND_USER_PKG", line 1150
ORA-06512: at "APPS.FND_USER_PKG", line 1196
ORA-06512: at "APPS.FND_USER_PKG", line 1315
ORA-06512: at line 2
i searched ADRIANA.GARCIAC in EBS users , it does not exist.
now, I think the FND_USER_PKG is corrupted
Edited by: jbaltodano on Aug 7, 2011 10:00 AM

Error when creating a new user

Hi all
When I try to create a new user I'm getting an error message Unknown message (ID = LOWERCASE_REQUIRED)
I entered all the required fields in the way it was defined and still I get this error.
I never had this problem before. Can anyone please help me with this issue.
Thanks
regards
Luke

Hi
Go to visual admin >> services >> UME Provider >> check the property default value is for ume.logon.security_policy.userid_lowercase
Hope it solve the problem
Cheers
Jawahar Govindaraj
PS:Reward pts

Approval workflow error when creating a new custom entity in FIM 2010 R2

Similar Messages

Maybe you are looking for