Approve data and lock data

Hello all
I have two units in a project that are taking part in the planning scenario.
The first unit enters the data, and the second checks the data.
I want that after thr first unit enters the data, and saves it, it cannot change it until the second unit approve the data.
I dont want to use the STS application.
Can anyone give me a tip how to do it?
Best Yuval

Hi,
Depends on how you decide to store this status (which will just be an indicator). Lets say it is a masterdata table where you keep an attribute called status. When the first unit presses submit, change this indicator to some predefined value, say '1'. The fox should run each time they try to save data and it should reach the proper status and throw an error if the status is '1'. The same record can be modified using a function by the second unit as required.

Similar Messages

Query to find the user ID create date and locked date

Hi,
As title, below is my query, it seem that it will not work as my expectation, can someone help?
SELECT T0.[USER_CODE], T0.[U_NAME], T0.[LOCKED], T0.[LstLogoutD] AS 'Last Logon Date' , T1.[CreateDate] FROM OUSR T0 INNER JOIN AUSR T1 ON T0.USERID = T1.userSign WHERE T0.[LOCKED] = 'N' AND
T1.logInstanc = 1
Thanks

Try this
After the Mr. Nagarajan post
SELECT
T0.[USER_CODE], T0.[U_NAME], Case when Isnull((Select Min(T1.date) from usr5 T1 where T0.USER_Code = T1.usercode GROUP by T1.Usercode), 0) <> 0 then (Select Min(T1.date) from usr5 T1 where T0.USER_Code = T1.usercode GROUP by T1.Usercode) else T0.[updateDate] end 'Creation date', T0.[lastLogin], T0.[Locked] FROM [dbo].[OUSR] T0
Regards,

In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?

In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?
=IF(I127,NOW()," ")
I127 equals a check box. The formula retuns a value of the current date and time when a check is placed in the box. How does one lock that date and time so that it cannot be changed?

I don't think it is possible to lock in the date and time using a formula. You could put NOW() in a cell, copy, and Edit Paste Formula Results where you want the result.
Or if you are "time stamping" a lot, you may find this Automator Service (Dropbox download) helpful. It puts a "Today" function (actually it should be named "Now" because it includes both date and time) in your Services menu like this:
Just doubleclick the .workflow package to install it. You may have to click "download anyway" in System Preferences > Privacy & Security.
If you want you can assign the service a keyboard shortcut in System Preferences here:
SG

The Difference between "Cell Data" and "Dimension Data"?

What is the difference between the tab "Cell Data" and "Dimension Data" in SSAS?

Article quote: " SSAS provides the way to secure analysis services database/cube data from unauthorized access. Analysis services provides secure access by creating object called "roles". After creation of role, user's windows login credential can be used
to enroll into particular role because analysis services identifies user from their windows login credentials . You can protect your data in roles at two levels:
1) Dimension level
2) Cell level
If user has been assigned more than one role, analysis services loop through all assigned roles after login. Analysis services finds all permission level for the particular user and union all the permission levels.
If two roles has contradictory access for user then particular access will be allowed. Suppose role1 says Australia data access and role2 denies Australia data access then access to Australia data will be allowed. "
LINK:
http://www.msbiconcepts.com/2010/10/ssas-data-security-dimension-and-cell.html
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Diff B/W master data and transaction data

Hi all,
What is the main Diff B/W master data and transaction data. give me some example ?
Thanks in Advance
Krish...

hi krish,
MASTER Data is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
TRASNACTION Data - These are the business documents that you create using the master data - Purchase orders, sales orders etc
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
Regards,
GNK.

Query on fetching the no.of days between Invoice date and due date in rtf template embedded BI Publisher Report

Hi Experts,
We have a requirement to fetch the value of 'No of days' between Invoice date and due date (Two variable date fields on the template) in an Analysis.
Please let me know the procedure of how to achieve the same.
Regards,
Rev

it's good for ideas but implementation a bit different
Oracle Business Intelligence Publisher Report Designer's Guide
This function provides a method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only the Gregorian calendar. The syntax is as follows:
<?xdoxslt:date_diff(‘format’, ‘YYYY-MM-DD’, ‘YYYY-MM-DD’, $_XDOLOCALE, $_XDOTIMEZONE)?>
where
format is the time value for which the difference is to be calculated
Example:
<?xdoxslt:date_diff(‘d’, ‘2006-04-08’, ‘2006-04-01’, $_XDOLOCALE, ‘America/Los_Angeles’)?>
returns
-7

Regarding : Material document data and PO data do not match (Plant)

Hi Gurus,
Please go through this BAPI program.
While uploading it is giving an error ' Material document data and PO data do not match (Plant) '.
Please help regarding this issue.For all Other moment types it is working fine except this 351 moment type.
dATA: i_excel TYPE truxs_t_text_data. "work table for excel upload
DATA: BEGIN OF it_itab OCCURS 100,
      docdate(10),
      postdate(10),
      mvt_type(3), "Movement Type
      plant(4), "Plant
      lgort(4),
      pur_doc(10), "Purchase Document No
      po_item(3), "Purchase Document Item No
      material(18), "Material Number
     delnote(16),
      erfmg(13),
      uom(3),
     lfmng(13), "Quantity
      batch(10) TYPE c,
      vfdat TYPE vfdat,
      END OF it_itab.
DATA: it_goodsmvt_head TYPE TABLE OF bapi2017_gm_head_01      INITIAL SIZE 100,
      it_goodsmvt_code TYPE TABLE OF bapi2017_gm_code         INITIAL SIZE 100,
      it_goodsmvt_item TYPE TABLE OF bapi2017_gm_item_create INITIAL SIZE 100.
DATA: wa_goodsmvt_head LIKE LINE OF it_goodsmvt_head,
      wa_goodsmvt_code LIKE LINE OF it_goodsmvt_code,
      wa_goodsmvt_item LIKE LINE OF it_goodsmvt_item.
DATA: w_mat_doc TYPE bapi2017_gm_head_ret-mat_doc,
      w_year     TYPE bapi2017_gm_head_ret-doc_year.
DATA: BEGIN OF it_errmsg_goodsmvt OCCURS 10.
        INCLUDE STRUCTURE bapiret2.
DATA: END OF it_errmsg_goodsmvt.
DATA : obj_type LIKE bapiache09-obj_type,
       obj_key LIKE bapiache09-obj_key,
       obj_sys LIKE bapiache09-obj_sys.
DATA: v_date1 TYPE sy-datum.
DATA: v_date2 TYPE sy-datum.
DATA: w_lines TYPE i.
DATA: errflag.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-100.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK bk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      field_name = 'P_FILE'
    IMPORTING
      file_name = p_file.
Start-of-selection processing
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header        = 'X'
      i_tab_raw_data       = i_excel
      i_filename           = p_file
    TABLES
      i_tab_converted_data = it_itab[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_itab.
    REFRESH it_goodsmvt_head.
    REFRESH it_goodsmvt_item.
    CONCATENATE it_itab-docdate6(4) it_itab-docdate3(2) it_itab-docdate+0(2) INTO v_date1.
    CONCATENATE it_itab-postdate6(4) it_itab-postdate3(2) it_itab-postdate+0(2) INTO v_date2.
    wa_goodsmvt_head-pstng_date = v_date2.
    wa_goodsmvt_head-doc_date   = v_date1.
   wa_goodsmvt_head-ref_doc_no = it_itab-delnote.
wa_goodsmvt_head-pr_uname   = sy-uname.
    APPEND wa_goodsmvt_head TO it_goodsmvt_head.
Maintain it_goodsmvt_code
    wa_goodsmvt_code-gm_code    = '04'.
Maintain it_goodsmvt_item
*LOOP AT it_itab.
IF wa_goodsmvt_item-po_number IS INITIAL.
    wa_goodsmvt_item-po_number    = it_itab-pur_doc.
    wa_goodsmvt_item-move_type    = it_itab-mvt_type.
    wa_goodsmvt_item-MOVE_PLANT      = it_itab-plant.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = it_itab-material
      IMPORTING
        output = it_itab-material.
    wa_goodsmvt_item-material     = it_itab-material.
    wa_goodsmvt_item-stge_loc     = it_itab-lgort.
    wa_goodsmvt_item-po_item      = it_itab-po_item.
    wa_goodsmvt_item-entry_qnt    = it_itab-erfmg.
    wa_goodsmvt_item-ENTRY_UOM_ISO    = it_itab-uom.
   wa_goodsmvt_item-po_pr_qnt    = it_itab-lfmng.
    wa_goodsmvt_item-batch        = it_itab-batch.
    wa_goodsmvt_item-expirydate   = it_itab-vfdat.
   wa_goodsmvt_item-NO_MORE_GR   = 'X'.
    wa_goodsmvt_item-mvt_ind      = 'B'.
    APPEND wa_goodsmvt_item TO it_goodsmvt_item.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
      EXPORTING
        goodsmvt_header = wa_goodsmvt_head
        goodsmvt_code    = wa_goodsmvt_code
      IMPORTING
        materialdocument = w_mat_doc
      TABLES
        goodsmvt_item    = it_goodsmvt_item
        return           = it_errmsg_goodsmvt.
Process of commit work
    IF it_goodsmvt_head[] IS NOT INITIAL.
      DESCRIBE TABLE it_goodsmvt_head LINES w_lines.
    ENDIF.
    IF it_goodsmvt_item[] IS NOT INITIAL.
      DESCRIBE TABLE it_goodsmvt_item LINES w_lines.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    IMPORTING
    RETURN        =
      CLEAR errflag.
      READ TABLE it_errmsg_goodsmvt INDEX 1.
      IF it_errmsg_goodsmvt-type EQ 'E'.
        WRITE:/'Error in function', it_errmsg_goodsmvt-message.
        errflag = 'X'.
      ELSE.
        WRITE:/ it_errmsg_goodsmvt-message.
      ENDIF.
      IF errflag IS INITIAL.
        COMMIT WORK AND WAIT.
        IF sy-subrc NE 0.
          WRITE:/ 'Error in updating'.
          EXIT.
        ELSE.
          WRITE:/ 'Material Document created successfully and the Document Number for the Material',
                  wa_goodsmvt_item-material,'is:', w_mat_doc, w_year.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.

Hey,
Just wanted to post that in my case this was the error of MVT_IND field in item table. When I made it from 'B' to blank then it worked.
Mine is solved....
Thanks

Downloding the SAP master data and transaction data to a flat file

Hello All,
Is there any SAP standard method or transaction to download the SAP master data and transaction data to flat file.
With out using ABAP development, SAP had provided any tool or method to download the SAP system master and transaction data to flat file.
Thanks,
Feroz.

hi
as of now up to my knowledge no.

Default key date, Document date and posting date needs to be changed automa

Hi Experts,
The user wants to create a variant for Foreign currency valuation, wherein the default key date, Doc date and Posting date needs to be changed every month automatically. Is it possible?
Please let me know your thoughts.
Warm regards,
Murukan Arunachalam

Hi
Please follow this process.
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data.
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

Hope someone can help. I have tried to find the best way to do this and can't seem to make sense of anything. I'm using an Access 2013 Database and I have a report that is based on a query. I've created a Report Criteria Form. I
need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date. I then need my report to return only the records that meet all selected criteria. It works fine with a ComboBox and 1 selection but can't
get it to work with a List Box so they can select multiple items. Any help is greatly appreciated while I still have hair left.

The query should return all records.
Let's say you have the following controls on your report criteria form:
txtStart: text box, formatted as a date.
txtEnd: text box, formatted as a date.
lbxMulti: multi-select list box.
cmdOpenReport: command button used to open the report.
The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
The report to be opened is rptReport.
The On Click event procedure for the command button could look like this:
Private Sub cmdOpenReport_Click()
Dim strWhere As String
Dim strIn As String
Dim varItm As Variant
On Error GoTo ErrHandler
If Not IsNull(Me.txtStart) Then
strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
End If
If Not IsNull(Me.txtEnd) Then
strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
End If
For Each varItm In Me.lbxMulti.ItemsSelected
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
Next varItm
If strIn <> "" Then
' Remove initial comma
strIn = Mid(strIn, 2)
strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
End If
If strWhere <> "" Then
' Remove initial " AND "
strWhere = Mid(strWhere, 6)
End If
DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
Exit Sub
ErrHandler:
If Err = 2501 Then
' Report cancelled - ignore
Else
MsgBox Err.Description, vbExclamation
End If
End Sub
If SomeField is a text field instead of a number field, change the line
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
to
strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
Regards, Hans Vogelaar (http://www.eileenslounge.com)

To get first date and end date after entering any month and year

Hi,
I need to to get first date and end date of a month and year in yyyyMMdd format. I am reading month and year from a properties file. But I don't know how to get the first date and End date in given format. The properties file gives me just text. But I don't know how to get the date format using this. I need this urgently. Can anyone help me to get code for this?
I am reading the fields as,
Properties props = new Properties();
props.load(new FileInputStream("AnyMonthVolume.properties"));
String date_month = props.getProperty("date_month");
String date_year = props.getProperty("date_year");
Thanks.

I know this has been posted a while ago but incase someone looking for it, here is the code to get the end of current month date.
Calendar cal = Calendar.getInstance();
     cal.setTime(new java.util.Date());
     cal.set(Calendar.DATE, 1); //set the date to start of month
     cal.add(Calendar.MONTH,1);
     cal.add(Calendar.DATE,-1);
System.out.println(cal.getTime());

Status 51 material document data and po data do not match(vendor)

i am using we19 to try an inbound idoc mbgmcr(receipt for po)
i put in gm_code 01
movement indicator B(goods receipt for po)
vendor 3815
PO 4500015241
PO Order Item 00030
Movement type 101
qty in unit of entry 1
iso code unit of measurement pc
on the po screen i see the po item and qty to be delivered is 75
when i run the inbound idoc i get
status 51 material document data and po data do not match(vendor) but as i say on the po inquiry screen i see the po vendor item with 75 to be delivered
what am i missing????????????????

thank you
i put in the leading zeros and got rid of that problem
now i am getting status 51
posting only possible in 2004/07 and 2004/06
but in the posting date i use 07/02/2004 i have tried several dates in the period but get the same error
any ideas?
thanks you

My ipod starts voicing song data, artist data, and playlist data while I am listening to music. Is this a feature or a defect? I do not know why it occurs, but the only way to stop it is to stop the music then play the playlist again.

My ipod starts voicing song data, artist data, and playlist data while I am listening to music. Is this a feature or a defect? I do not know why it occurs, but the only way to stop it is to stop the music then play the playlist again.

To make sure voiceover is off, you need to go to summary screen then click the "Configure Universal Access" button. Then you will get a dialog where you can make sure voiceover is off. All of the boxes in the dialog should be unchecked.
i

Goods Receipt and Goods Issue - Posting Date and Document Date Problem

Hi All,
I was using SDK to build own add on to insert Posting Date and Document Date under Inventory> Inventory Transactions> Goods Receipt and Inventory> Inventory Transactions> Goods Issue, but the UI Screen Posting Date and Document Date shown current date.
My SAP Business One version was 2007A SP00 PL42 and alreadly upgrade to SP05.
End up result still the same.
Is there someone can help me?
Thanks you.
Best Regards,
danny

Hi there,
I already solve it by myself.
Actually is i call the initialization twice:
Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
Thats what make this problem happened.
Sorry.
Best Regards,
danny

Approve data and lock data

Similar Messages

Maybe you are looking for