How to display column headings only once in each page with repeated blocks

Hi,
I have a report with 1 block on one column. The block has a table in it and will repeat in one page.
I need to display the column headers only in the beginning of each page. Can someone share your experience in implementing this ?
Thanks for your help.

>
andyhchsu wrote:
> Hi,
> I mean in each block within section, I only need to display the table header once in each page.
> However if I check table header, it will display repeatedly. Any way to get around this ? Thx.
The trick I use to do that is turn off all the headers on the block (table and break) and put the header information in its own block above the section and set the new header block to repeat on each page. You just have to remember to resize the columns in the header block if you make changes to the column sizes in your data block.

Similar Messages

To show the 2nd part highlighted there only once on each page

Hi,
Could you pls see this for the problem?
http://www.4shared.com/document/VExaTDlv/t31.html
Regards,
edward

Hi,
The 1st highlighted part below should be Group 1 in the report.
The 3rd highlighted part should be Group 2.
Without using a subreport for showing the 3rd part below, is there still a way to show the 2nd part highlighted below only once in each page?
what is the 2nd part the column headings?
what do you mean highlighted?

How to display field value only once in REUSE_ALV_GRID_DISPLAY

hi experts,
               i am using REUSE_ALV_GRID_DISPLAY, for alv outpur display.but i want one of the field in output ,not to display the value which is of same, it have to be displayed only once, I mean i have a number which contains multiple line items corresponding, here i want to display the field value only once when it is repeating , for the same header number, how can i achieve it

Hi,
check the sample code,
REPORT Z_ALV.
Database table declaration
TABLES:
sflight.
Typepool declaration
TYPE-POOLS:
slis.
Selection screen elements
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME TITLE text-000.
SELECT-OPTIONS:
s_carrid FOR sflight-carrid.
SELECTION-SCREEN END OF BLOCK blk_1.
Field string to hold sflight data
DATA:
BEGIN OF fs_sflight ,
    carrid   TYPE sflight-carrid,      " Carrier Id
    connid   TYPE sflight-connid,      " Connection No
    fldate   TYPE sflight-fldate,      " Flight date
    seatsmax TYPE sflight-seatsmax,    " Maximum seats
    seatsocc TYPE sflight-seatsocc,    " Occupied seats
END OF fs_sflight.
Internal table to hold sflight data
DATA:
t_sflight LIKE
   STANDARD TABLE
         OF fs_sflight .
Work variables
DATA:
t_fieldcat TYPE slis_t_fieldcat_alv,
fs_fieldcat LIKE
         LINE OF t_fieldcat.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_data_sflight.            " Getting data for display
PERFORM create_field_cat.            " Create field catalog
PERFORM alv_display.
*&      Form create_field_cat
      Subroutine to create field catalog
      There is no interface paramete
FORM create_field_cat .
PERFORM fill_fieldcat USING   'Carrier Id'    'CARRID'   '2'.
PERFORM fill_fieldcat USING   'Connection No' 'CONNID'   '1'.
PERFORM fill_fieldcat USING   'Flight Date'   'FLDATE'   '3'.
PERFORM fill_fieldcat USING   'Maxm.Seats'    'SEATSMAX' '4'.
PERFORM fill_fieldcat USING   'Seats Occ'     'SEATSOCC' '5'.
ENDFORM.                                    "create_field_cat
*&      Form fill_fieldcat
      Subroutine to fill data to field column
     -->p_seltext      Column label
     -->p_fieldname    Fieldname of database table
     -->p_col_pos      Column position
FORM fill_fieldcat USING
                    p_seltext    LIKE fs_fieldcat-seltext_m
                    p_fieldname LIKE fs_fieldcat-fieldname
                    p_col_pos    LIKE fs_fieldcat-col_pos.
fs_fieldcat-seltext_m = p_seltext.
fs_fieldcat-fieldname = p_fieldname.
fs_fieldcat-col_pos    = p_col_pos.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
ENDFORM.                    " fill_fieldcat
*&      Form get_data_sflight
      Subroutine to fetch data from database table
      There is no interface parameter
FORM get_data_sflight .
SELECT carrid
         connid
         fldate
         seatsmax
         seatsocc
    FROM sflight
    INTO TABLE t_sflight
   WHERE carrid IN s_carrid.
ENDFORM.                    " get_data_sflight
*&      Form alv_display
      Subroutine for ALV display
      There is no interface parameter
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      it_fieldcat   = t_fieldcat
    TABLES
      t_outtab      = t_sflight
    EXCEPTIONS
      program_error = 1
      OTHERS        = 2.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " alv_display
End of code

Display column titles only once per page

Hello,
I am a newbie to BIP (R12.1.3). Below is how the output data shows up in my custom template:
Vendor type lookup : Expense
Vendor no: A12345 Vendor Name: Test Vendor1 Vendor Category: Expense - Construction
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
======== ====== ========= ====== ====== ====== ============
Kannapolis A#12345 03-MAR-12 15-MAR-12 1000.00 1000.00 Check
Vendor no: B12345 Vendor Name: Test Vendor2 Vendor Category: Expense - Rents
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
======== ====== ========= ====== ====== ====== ============
Test Site B#12345 03-MAR-12 15-MAR-12 1500.00 1500.00 EFT
The column titles repeat for each vendor since the titles are in the for-each loop under the vendor grouping. However, is there a way to restrict the titles to show up only once per page on all the pages? I tried putting the titles outside the vendor grouping but with in the vendor type lookup grouping. It is displaying the titles only on page1.
Thanks,
Monkey

Hi, could you try Inserting the code <?if:position()=1?> before the header of your template and the code <?end if?> after the header of your template.
See the a sample code below:
<?if:position()=1?>
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
<?end if?>
Thanks,
mr_bip_learner

How to display a field only in the last page

hi all
i am using reports 6i
i ve created summary column and i need to get it displayed only on the last page of the report
is it possible
kindly guide
thanking in advance

Dear Friend,
where you created the summary coloumn? If your summary column in at top level you can do this just placing summary field bottom all repeating frame (all frames).
Regards
Ahamed Rafeeque Cherkala

How to display Column of a particular list to page using Content Search Webpart?

Hi,
I am having two columns 'Column1 & Column2' in a list names Demo. I need to display the items of both the columns into a page with the help of Content Search Webpart. I am using SharePoint 2013 Platform.
Expecting some useful comments on the same...!!
Warm Regards,
Tony Joy.

Hi,
If you just want to display two columns of a list, Content Query Web Part will be more appropriate:
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2013/05/10/how-to-use-the-content-query-web-part-to-rollup-data-in-sharepoint-2013.aspx
To display multiple columns, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1484df2b-0fb9-4b58-b833-a75019db88c7/content-query-display-multiple-columns
Best regards
Patrick Liang
TechNet Community Support

How to have column headings re-print on next page when printing?

When I make a document in Numbers '08, that requires more than one page, how do I get the column headings to print on the other pages?
I have looked at 'Print View', but cannot edit what I see. Please help!

I no longer use Numbers '08 but if I remember well, the soluce is to activate the "Show Print View" mode from the View icon available on the left edge of the toolbar.
It offer:
Show/Hide Print View
Show/Hide Layout
Show/Hide Rulers
Show/Hide Format Bar
Show/Hide Comments
Yvan KOENIG (from FRANCE samedi 4 juillet 2009 18:04:06)

How to display grand total only on the last page of my report

Hello
I need to display the grand total amount of the invoice only on the last page of every report. If the report has 1 page then the grand total will be displayed on the 1st page. If the report has 2 pages then a subtotal will be displayed on the 1st page adding up all the amounts on page 1 only, and the grand total will be displayed on the 2nd page, adding up all the amounts of page 1 and 2. If the report has 3 pages then the a subtotal will be displayed on page 1 adding up all the amounts of page 1, and another subtotal on page 2 adding up all the amounts of page 2, and the grand total are displayed on page 3 adding up the amounts of every page.
supplier amount
xx 100
yy 100
subtotal 200
page 1 of 2 --here i need to display only the total amounts of page 1
supplier amount
subtotal brought forward 200 --then i need to bring total of page 1 over to page 2
qq 300
zz 300
total 800 --here i have reached the end of the report and
need to display the grand total
page 2 of 2
--Currently i am displaying this on my report
supplier amount
xx 100
yy 100
total 800 --this one gives the problem cause it displays the grand total
---------- on page 1 of 2 even before you can see the amounts on the
next pages
page 1 of 2
supplier amount
qq 300
zz 300
total 800

put the grand total in a frame and set it to print on the last page of the enclosing object.

How to make a summary column appear only once (in the first page only) in SSRS 2008?

Hello Everyone,
How to make a summary column appear only once (in the first page only) in SSRS 2008?
Regards
Gautam S
Regards

Hi,
Assuming you have test data like this ;
select 'abc'as [GROUP],'NN' name , 1 id
union all
select 'abc' as [GROUP] ,'PP' name , 1 id
union all
select 'abc'as [GROUP],'RR' name , 2 id
Step1 : take Tablix with row group as your group Name .
Step2 : right Click on Row Group Details -> Delete-> Delete Group Only
Step3 : In Count Cell use below expression ;
=CountDistinct(Fields!id.Value)
Follow this link;
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b6b45917-0a26-4d15-be46-2c6a2697d6e9/distinct-rows-sum?forum=sqlreportingservices#5ffdee06-c2c8-44ea-a3a5-b958488bb6b5
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

How can I have header only once in group above rep

Hi
I have developed a group above report and i see that the main header is repeated for every row (that is group by row). How can I have that only once per page or report and not repeat for every record?

The "main header" must be inside the repeating frame. Put the repeating frame in its own non-repeating frame, put the header in its own frame inside this frame at the top.
It sounds like you are using the report wizard... if so, don't.

Still not possible (4.0 EA3) to copy displayed column headings from ref cursor output.

Hi,
I've created an enhancement request to allow displayed column headings from ref_cursor output to be copied.
This is still not possible (4.0 EA3)
The ref cursor data can be copied, but not the headings..
See July 2012 discussion of problem in comments at
http://www.thatjeffsmith.com/archive/2011/12/sql-developer-tip-viewing-refcursor-output/

Hi,
I think you're out of luck... except if you're on 11g where you can use DBMS_SQL.TO_CURSOR_NUMBER to convert the REF CURSOR to a DBMS_SQL cursor, and then benefit from the DBMS_SQL package to get column details.
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_sql.htm#CHDJDGDG

How to display line items twice in a single page in sap script

HI,
I am working on check printing. I copied the standard driver program and form to Zprogram and ZForm. Which are RFFOUS_C(print program) and F110_PRENUM_CHECK(Form Name).
I want to display the line items twice in the same page and sub sequent pages.
Currently I am able to display line items only once.
Example:
PAGE1.
line item1
line item2
line item3
line item4
line item5
line item1
line item2
line item3
line item4
line item5
line items 1 to 5 which are in main window.
How to achive this problem.
Regards,
vinod

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

How to display a user message on WEBI Home page ?

Hi all,
How to display a user message on WEBI Home page ?
like when ever the data gets scheduled at etl side i want to display a message a message on info view home page "new data is uploading" is this is possible to do ?

Unfortunately this is not possible to do "out of the box". There aren't any pre-configured options that will let you do this. You're only real option is to try and modify the infoview source code yourself to do this.
Regards,
Shawn

How to display the JSP output in the same page....

im new to JSP..... can anyone tell me how to display the output of a particular JSP page in the same page itself...... if anyone could send a small sample code it will be very useful for me....
thanks in advance
regds
Krish......

Hi Robert -
When you say you are writing a template-based Renderer, do you mean that you are creating a custom look and feel and replacing the header Renderer? If so, I'd recommend instead simply creating your own template (not template-based Renderer), and reference your template directly from your uiXML pages where you want to insert the timestamp.
You'll probably want to write a method data provider which calls System.currentTime(), convert the result to a date, and then use Java's date formatting capabilities (see java.text.format.DateFormat) to produce a user presentable String that you can return from your data provider.
For more info (and samples) on templates and data binding, see the "Templates and Data Binding" section of the "Includes and Templating in ADF UIX" help topic:
http://tinyurl.com/5b7bf
Andy

How to display discount price amt in order confirmation page

hi,
I created a discount for site,who places any order will get a discount for that particular order ,How to display discount price amt in order confirmation page.suggest some points guys.

Try displaying it as following , just put the jsp code for the if() statement i have put below.
This block loops through order level adjustments and displays the discounts for the one's associated with order promotions.
<dsp:droplet name="ForEach">
<dsp:param name="array" bean="ShoppingCart.current.priceInfo.adjustments" />
<dsp:param name="elementName" value="pricingAdjustment" />
<dsp:oparam name="output">
//displaying if discount was provided, associated with some order level promotion
if (pricingAdjustment.getPricingModel() != null && pricingAdjustment.getAdjustment() < 0) {
<dsp:valueof param="pricingAdjustment.totalAdjustment" />
</dsp:oparam>
</dsp:droplet>

How to display column headings only once in each page with repeated blocks

Similar Messages

Maybe you are looking for