Approved hours in CATS works as Good Received in MM

Employees from subcontractors are working at projects defined in PS. They are using CATS to write the project hours on projectactivities. When these hours are approved by the manager the hours are loaded into PS. Is it possible to load the same approved hours in MM as a good receipt by a purchase order. The purchase order is created to monitor the purchased hours from subcontractors. How can I fix this.
kind regards, Henk Kat

Hi
If you want to default the order then enter the value in IT315 or else just maintain the field in the data entry profile and there you can choose what ever order you want to according to the Activity type and the it can be transfered to MM thru CATM tran code
Ravee
+91.99206.33669

Similar Messages

  • Difference between goods receiving hours & working hours

    Hello,
    What is the difference between
    goods receiving hours at the unloading point of the goods recipient and
    working hours at the shipping point?
    May

    The calendar and the goods receiving hours of the unloading point are relevant for the confirmed delivery date (delivery date LFDAT).
    The calendar and the working hours of the shipping point are relevant for the calculation of all other dates (Material availability date MBDAT, transportation planning date TDDAT, loading date LDDAT and goods issue date WADAT).

  • Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued  The Adobe Support Advisor tool was used to analy

    Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued  The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

    Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
    Mylenium

  • Goods receiving hours in the customer master.

    Friends,
    Can any one explain goods receiving hours in the customer master. what exactly this fields is used.
    thanks
    Devi reddy

    Hi,
    We define the possible goods receiving hours of your customers. With this function, you can plan the shipping activities so that the deliveries arrive by the desired deadline in the right city at the right time.
    The goods receiving hours are copied by the System from the customer master record into the delivery header according to the unloading point and the delivery date.
    Goto IMG -> Sales & Distribution -> Master Data -> Business Partner -> Customer ->Shipping ->Define Goods Receiving Hours.
    Here you define the goods receing hours by 3 digit number, for example, Week days only or also on Satur days ect. use the same in customer master.
    Hope this is clear.
    thanks
    Praveen

  • Customer master - goods receiving hours

    Hello
    In customer master, unloading points tab I would like to add one more default value for goods receiving hours namely 004 - on Sunday 1300 to 1700 hours?
    Where can I do this configuration?
    Thanks

    Go to transaction OVSC.
    Copy one of the standard setting to 004 and enter text as Sunday.
    Maintain timings for Sunday for this 'goods receiving hours' by clicking the magnifying glass and entering your required time of 1300 to 1700 hours.

  • Goods receiving hours in DESADV DELVRY03 message

    Is it possible to send the goods receiving hours in the outbound delivery with the IDOC DESADV/DELVRY03?
    SAP places date and time in the EDT13-segment of the IDOC but we need the whole time frame on the delivery date to inform the logistics service provider.

    For example in the outbound delivery the following goods receiving hours are recorded:
    14 jan 2008 (Monday)
    Morning from 08:00 till 11:00 and
    afternoon from 13:00 till 16:00.
    SAP calculates in the delivery the earliest delivery time, in this case 08:00 on monday 14 jan 2008, which is places in the EDT13 segment. In our case we also need to send whole goods receiving hous time frame. This can be done in the EDT13 segment or a extra added segment (like EDT13) to the IDOC?

  • BAPI - Retrieve Goods Receiving Hours

    Hi Experts!!!
    Does anybody know a BAPI to retrieve the goods receiving hours of a BP?
    Reward points....
    thanks!

    Hi,
    BAPI_BUPA_HOURS_GETDETAIL.
    input: SCHEDULE_TYPE = try with A or B. not C beacause it is for visit hours.
    tables CRMM_BUT_FRG0061  and SCRULES will be helpful.
    Regards
    Radek

  • Customer goods receiving hours and unloading points in TM

    Dear All,
    Anyone knows is there any functionality to define customer goods receiving hours and unloading points in TM?
    Regards,
    Ali

    Hi Ali,
    Take a look at /SAPAPO/TMS_CAL.  You will also need to know a bit about Calendars and Time Streams.  May want to take a look and do some research before going too deep into the subject.
    Also go to your planning profile and in the first tab you will see a reference to Factory Calendar for Offs/Dur. Calc.  By selecting a specific calendar you can limit the hours for accepting deliveries or picking up material.
    And under Business Document Type for Default Type for Schedule (using the Document Type to determine the schedule constraints.
    And the Scheduling Strategy for Scheduling (default of VSR_DEF). 
    And probably many other considerations depending on your needs.  You may be able to simply use the Factory Calendar in the Planning Profile to do your initial testing.
    Regards,
    Mike
    Edited by: Michael Appleby on Feb 10, 2012 4:36 PM

  • Have Mail Version 4.6 (1085), is not working properly not receiving mail.  I sent a test message to my computer; it took over an hour delivering.

    Have Mail Version 4.6 (1085), is not working properly not receiving mail.  I sent a test message to my computer; it took over an hour delivering. There are multiple copies of messages appearing in the recovered folder
    My computer is a MacBook, version osx 10.6.8
    All help appreciated
    <E-mail Edited by Host>

    Hi vin rouge,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Configuring Mail for your email account 
    http://support.apple.com/kb/HT1277
    Cheers,
    - Judy

  • Actual Goods receiving time

    Hi ,
    I want to capture material delivered time to customer. We have thought  about POD process but in this case bills can be prepared only after POD confirmation moreover since no. of deliveries are large this option is also not operationaly fit.
    I have maintained scheduled time on customer master (goods receiving hours)
    Pls suggest where we should captuer the actual receiving time per customer.
    Regards
    Sanjay

    I also think the comment that 'moreover no of deliveries is large' is irrelevant. Actually, if you want to capture this data you have to enter it for all deliveries somehow regardless the number.
    I'm not sure if my suggestion will work, as system issues error message when try to remove POD after delivery invoiced. I'm not sure if the same happens if you try to enter POD after the delivery is invoiced, as I don't have this setup to check.
    Rgds
    Richard

  • Goods Receive for Outbound Delivery Without Reference using MIGO

    Dear Colleague ...
    We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
    (1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
    (2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
    (3) The first 2 (two) cases work just find with MIGO.  We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
    (4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5".  We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
    (5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
    Appreciate for any thoughts or input on the above.  Many thanks,
    Alvon Sibarani

    use transaction mb0a it will work for the scenario.

  • Goods receiving

    All,
    I'm looking for a Goods Receiving process that allows the receipt of multiple lines on a single PO.   Currently we are using the FM 'BBP_CF_AUTOMATIC' which handles one line at a time and it seems when this is put in a loop the PO on the back end is locked due to being called for the previous line item.   This results in only some line items being received.  
    Is there a different FM perhaps BBP_goodsmvt_create that can manage multiple line items at a time?   Or any suggestions on how to use BBP_CF_AUTOMATIC so that it will allow us to receive all line items needed?
    Thanks
    Sandra

    For example in the outbound delivery the following goods receiving hours are recorded:
    14 jan 2008 (Monday)
    Morning from 08:00 till 11:00 and
    afternoon from 13:00 till 16:00.
    SAP calculates in the delivery the earliest delivery time, in this case 08:00 on monday 14 jan 2008, which is places in the EDT13 segment. In our case we also need to send whole goods receiving hous time frame. This can be done in the EDT13 segment or a extra added segment (like EDT13) to the IDOC?

  • Transfer of hours from CATS to HR

    Hi.
    One of my customers has set up a transferral of hours from CATS to HR (IT2001 and IT2002) with help of trx CATA.
    The process includes approval of hours via CATS_APPR_LITE which slows everything down considerable. In the time gap between recording of hours, and approval of hours, WBS-elements are closed. This causes error messages in program RCATSTAL (trx CATA).
    Does any of you have any suggestions of how to make the process smoother?
    I've been thinking of direct transfer to HR - either from CATS or from CATS_APPR_LITE. If the direct transfer is triggered from CATS, how can the hours then be approved?
    Thank you in advance!
    Odd

    Hi,
    You can do one thing than. Use SAP standard task for approval process.
    For more details refer the below links:-
    1. http://help.sap.com/erp2005_ehp_05/helpdata/EN/64/4003fb470211d189720000e8322d00/content.htm
    2. http://help.sap.com/erp2005_ehp_05/helpdata/EN/3e/697b423737dc54e10000000a155106/content.htm
    Thanks & Regards, Swapnil Mishra
    Hi again, Swapnil.
    Thank you for your effort in helping me solve this. One way of speeding up the approval process would be to transfer given A/A codes without approval, and only have some A/A-codes through the apporval process.
    As I can see from your refered links, hours HAS to be approved (status 30) before they can be transfered to HR.

  • MM Goods Received Info req??

    Hi
    Is there any way to find out the GR No-MBLNR  for good received (Mov type - 101) against any Dilivery Doc No(PO is unknown).
    Is there any SAP FM exits for this?
    I have to track the GR status for the Dilivery Doc No(VBELN).
    Urgent Help Req!!!
    rgds
    vipin

    i am looking the same,but unable to identofy the data?
    in MKPF there are 2 fileds:ref doc : XBLNR & delivery: le_vbeln,so I am confuse which shd i take to chk the accurate one.
    Secondly for that deliv/ref no-its shows the MBLRN irresp of any mov type i think so?.
    and i am not able to acces the MSEG table with that ref/dilv no.Is any where in MSEG can i find out the MBLRN for particular deliv no for all mov type??
    that can solve my  prob?but i am unable to find the filed for dilv in MSEG.
    its only works with MBLRN i guess.
    So how to do??

  • Is it possible use PPF to setting Auto Good Receive?

    Dear Experts,
    We met the problem in inbound process
    When we packing the product to Handling unit in Inbound Delivery ,then we want to EWM system can be auto Good Receive.
    Is it possible use PPF to setting Auto Good Receive?
    I have tried to use Full Pack then Auto Good Receive. but it doesn't work.
    Can anyone help us to solve this problem?

    Hi Howard
    Yes it is possible need to check action and execute with schedule condition when pack post GR.
    check action and there process and method in this tcode and copy and use when create ID from IDN.
    /nSPPFCADM
    this action with execute when IDN converts to ID and it will check line item is packed in HU. If yes then post GR.
    Regards
    Suraj

Maybe you are looking for

  • Copy Open sales oder from one DB to Other DB

    Hi Expets, Can any one help me how to copy Open Sale Order from one data to another Database which exact replica(Both are Same configration) Kathi.

  • Some question about SAP CRM consultant

    Dear all,       I'm a center-based consultant in china.Our company is among the first batch to run SAP CRM in china in 2006.Our version is CRM 5.0.From my two years' working experience,the status of using CRM in our company is not very good.Complex U

  • Idvd image quality problems??

    Will the length of video on a dvd created with idvd affect the quality of the image? I have just created a dvd which is pretty packed 3.7 GB are used on the dvd. Most of the video looks great. However some sections later in the movie (which when shot

  • New u201CData Connectivity u2013 Crystal Reportsu201D forum

    Dear Users, Current Crystal Reports Design forum reached almost 14 thousands threads and it became difficult to search, explore as well as to moderate. Some of you suggested branching out some subjects like Crystal Reports connectivity, Charts, Cross

  • ITunes wishes to update deleted apps.

    iTunes wishes to update deleted apps, they are no where to be found on my iPhone and seem invisible on iTunes, when I 'check for available downloads' they will ALWAYS appear and try to download, I pause them then delete them but they always come back