Approver related help needed

Hi all
I am using WS14500015 for item level SC approval. I have some issues with it.
1) If no approvers are found then I need to send it to some default approver. I filled the approval_administrator table but still nothing happens.In approver preview I get the default approver description but when I click on it "No approvers found" gets displayed in details. Please help me out to fix this.
2) In standard substitution anybody can be attached as substitutes. I have a requirement wherein only those people with certain roles should be able to be assigned as substitutes. Is there a badi or so where I can code this?
3)What to do for restart of workflow? I have gone through the notes and also posts on this but still cant understand how to go about it.
Please help me out with these. Its very urgent.

There really is not something easy to learn or a structured method about tuning. It is about knowing what Oracle does under the covers and why. For this you'll have to do some necessary reading, so I'll also advice you to read the link provided by cd. And I also recommend the book Cost-Based Oracle Fundaments by Jonathan Lewis.
And a practical tip, it is obvious but unfortunately most often forgotten: first diagnose the problem to be able to pinpoint the root cause. You have several tools for this: "top" command from Unix, SQL*Trace/tkprof, explain plan, dbms_profiler, trace events, statspack. My advice is to work with them to be familiar with them so you can use them efficiently.
Hope this helps.
Regards,
Rob.
Message was edited by:
Rob van Wijk
Fixed url

Similar Messages

PO Approval fundamentals help needed

Hi friends
I have some very basic query regarding Purchase order cancellation and approval process in Oracle 11i (11.5.10.2). pls consider the followings
*1)* is it possible for a PO where its Approval Status = In Process while its closure status = Closed?
*2)* What happens when i cancel an Approved PO's PO line (for example, i may cancel due quantity which i wish to not receive anymore)? does it go through the approval hierarchy for re-approval (approval status becomes In Process) or just stay approved?
*3)* is it a normal behavior for a PO when it shows Approval Status = In Process but Action History says its Approved?
i need to know the normal behavior in every case i mentioned above. Can anyone pls help me?
thanks in advance.
Lisan

1. yes
2. stays approved
3. no

Document Publishing Approval Workflow - Help Needed

Hello All,
I am trying to use Publishing Documents with an Approval workflow, but however when I am creating a Document and am publishing it, it does not show up in the UWL of the Approver.
Can some one suggest what could be wrong or missing.
Best Wishes,
John.

Hi,
I you have configured approval process and you are receiving notification in Recent Notification iview, it's working fine, you should check:
The UWL interacts with (task) item providers through specific connector. The connectors perform basic mapping of attribute values and determine the work item type and execution method. Connectors also help in connection to object and attachment repositories to retrieve additional custom attributes or attachments.
The UWL comes with standard provider connectors and it is possible to configure their detailed behavior based on work item types.
The connectors that are configured by default with UWL are:
· AdHocWorkflowConnector
· ActionInboxConnector
Both connectors are configured by default, so both Collaboration Tasks and KM Recent Notifications show up in the UWL by default. Removing the connectors will remove the corresponding items from the UWL.
ActionInboxConnector
This connector relates to the Notifications received by UWL from Knowledge Management (KM).
The ActionInboxConnector provides KM Recent Notifications into the UWL Notification tab, which include document feedback, subscription items, subscription administration, and document approval notifications; in addition, checked out documents appear under Tracking, and documents for approval under Tasks.
By default the Action Inbox Connector for UWL is enabled.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/12d65d4e084ac886fcdf113909d03a/frameset.htm
Inbox Service
http://help.sap.com/saphelp_nw2004s/helpdata/en/89/bbfbba3e7040c39462350fc536e651/frameset.htm
Notifications for Folders in the Universal Worklist
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/ad743c74fa6449e10000000a11402f/frameset.htm
Patricio.

Oracle Business Events related help needed

Hello All,
Good Morning , wanted some help regards Oracle Business events be used for sending notifications.
We are having a situation wherein we need to send notifications to the sales team whenever there are changes to the order line status..lets say the order line moves from Booked status to Awaiting Shipping status and further to Picked or Shipped status, we need to notify the sales team about this.
If we are going to use Business Events concept for this we wanted to check on the below points -
1.At the order line level what all seeded business events have been defined ( means if we could get the complete listing ) and whether any of these gets triggered when the order line status changes...we are on Oracle Release 12.0.6 version
2.Also is there a way to know what all parameters are being passed for a given seeded event, so that we know which parameters we could retrieve within the subscription using wf_event_t.getvalueforparameter function.
3.Regards setting up Subscriptions for this order line seeded business event : means we could see an option which says : "Send a Notification" when we are defining a Cstom Sbscription ( Now here it asks to give the Message Type ( This would be workflow item type where the message is defined in workflow ) and Message Name ) ..
Now if in this NOTIFICATION MESSAGE we need to show details like order number , sales rep , order line status etc ( then where do we set these details in the Event and also how do we pass these details from subscription so that it shows in the notification )
Means where do we setup and define values for the notification message attributes and how do we pass these values from event to the subscription and finally to the notification..How do we achieve this because some of the message attributes for the notification are Document Type while some are text/number types.. These would be required to show in the notif message...
4. Also once we send the notification lets say succesfully to person or a role using a subscription , how do we capture the response ...
Could someone please help us with this as we are stuck with this at the moment.
many thanks

Hi,
please reply the above questions.it would be a great help for me.
Thanks
Sap Guru

Gmail related help needed ASAP

Hi guys, this is my first post here. The iPhone has been great so far but I'm in a bit of a bind with some Email features and wanted to see if any of you 1337 pros can help me out.
I have road runner email and it's all routed to my gmail account. I setup my gmail to go through my iPhone now. The problem is my iPhone wants to download all 3678 messages in my gmail account! Even the ones I already looked at. It also sends all my replies back to me.
How can I setup my gmail and iPhone so that it only downloads new messages from today forward? Also how can I set it up so that the emails stay NEW on GMail even tho I may read them on my iPhone?
Thanks for any help in advance I appreciate it.
Regards,
iPhone Gmail setup retard. =P

I can probably help with the more pressing problem, the 1000+ emails. The fix, I think, is on the Gmail side. You need to go into settings and turn off POP access to your Gmail and save the changes. Then, you can re-activate POP but set it to only retrieve messages from now going forward. This is what I did when I configured my phone and it worked.
As to keeping the messages "new" even after reading them on your phone, so long as you are using POP to get the Gmail, this should happen as a matter of course, at least it does for me but the forwarding of stuff from your cable account might have some impact upon that, I don't know.

SMTP Related Help Needed

How can I dynamically search SMTP Server on a particular Network?

you can test whether a machine is an smtp server by opening a socket connection to its SMTP port(25) and reading the response
Socket soc = new Socket("the_machine_name",25);
BufferedReader br = new BufferedReader(new InputStreamReader(soc.getInputStream()));
String response = br.readLine();
if(response.startsWith("220"))
System.out.println("Its a Mail Server");
however, if u need to search for an SMTP server on your network, u have to know the name(or IP) of all machines on the network (LAN).
does anyone know how to find out the IP of all machines on your network ?

Help need to switch Muse site to BC on a allready hosted plan

Hi, i also posted on BC forum...
I have a client that was in a hurry to have his emails accounts before the entire website.
So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
The site would be just a small 7-10 pages not to complicated.
Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
He approved the design, yay!
At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
so i told him i would have to remake "template".
I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
Now, i created a new temporary site using one of the new responsive template available.
How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
cant i just delete everything in the root folder, and upload the entire new site via ftp?
please help me find the solution. i am a bit in a panic here
hope you could understand my lousy English.
Sincerely,
i.d.

This would need to be transparent for m'y client...
Y
Envoyé de mon iPhone
Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
Re: help need to switch Muse site to BC on a allready hosted plan
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Thanks for additional details.
Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Garg

rohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

ONKYO TX-SR805 Set-up Menu HELP Needed

This is a LONG post, but I would appreciate if you would read it and respond to it. The settings That are setup might not be the CORRECT settings. If you think a different setting should be made, please let me know.
Also right now I only have 2 front speakers (NHT VT-1A), 1 middle( NHT VT-1C), and a NHT SW12 Subwoofer. I will be hooking up 2 or 4 more speakers for the REAR.
Here are the settings on my TX-SR805 receiver on the set-up menu. I could use some help to see if they need set to something else.
2.2 Speaker Config
      Subwoofer       yes
      Front            70Hz
      Center          90Hz
LPF of LFE        80Hz THX
2.6 THX Audio Setup
       THX subwoofer YES   I don't know if mine is or not
       BGC                    OFF Not sure what this BGC means
3. AUDIO ADJUST
3.1 Tone Control
       Front    Bass      -1dB
                    Treble   +1dB
      Center Base      +2dB
                    Treble   +7db
     Subwoofer Base +7
3.2 DIRECT
      Delay Enable
      DSD                NO   Not sure what DSD is
3.3 MULTIPLEX/MONO
      Multiplex
      Input CH       Main/Sub
      Mono
      Input CH         L+R
      Output Speaker L/R
3.4 PLIIx/Neo:6
        PLIIx Music   (2ch input)
        Panorama        ON
        Dimension       +1
        Center Width    3
Neo: 6 Music
        Center Image   5
3.5 DOLBY EX
        Dolby EX        AUTO
3.6 THEATER-DIMENSIONAL
        Listening Angle   Narrow
3.7 LFE LEVEL
        Dolby Digital      -10dB
        DTS                     -10dB
        Multich PCM      -10dB
        Dolby True HD   -10dB
        DTS-HD Master Audio -10dB
        DSD                     -10dB
4. SOURCE SETUP
       CABLE/SAT
4.1 INTELLIVOLUME     +4Db
   .2 A/V SYNC            0 msec
   .3 NAME EDIT         Blank
5.   LISTENING MODE PRESET
5.1 DVD
       Analog/PCM      NOT SURE WHAT TO SET HERE
       Dolby Digital      NOT SURE WHAT TO PUT HERE
       NOT SURE WHAT TO PUT FOR ANY OF THESE LISTENING MODE PRESET
5.8 TUNER (ANALOG)      Neural THX 5.1 is set on mine. Is this correct?
         CD                           ?
6. MISCELLANEOUS
6. 1 VOLUME SETUP
          Volume Display              Relative
           Muting Level               -40dB
           Maximum Volume       +10dB
           Power on Volume        -22dB
           Headphone Level        +2dB
6.2 OSD SETUP
           Immediate Display       OFF
           Monitor Type              16:9
           Display Position           TOP
7. HARDWARE SETUP
7.4   ANALOG MULTICH
           Subwoofer Input Sensitivity    0
7.5   HDMI
        ALL under here are     ENABLE
Solved!
Go to Solution.

I gave you some answers in your original post. I wish you didn't start a new one. Here is what I posted.
Re: ONKYO TX-SR805 Set-up HELP Needed[ New ]
Options
Mark as New
Bookmark
Subscribe
Subscribe to RSS Feed
Highlight
Print
Email to a Friend
Report Inappropriate Content
01-21-2010 08:24 AM
Unfortunately this is very difficult because the top half of your post, your really the only one that can answer what the setup should be. The adjustments are made based on the acoustics of your room and how everything sounds noone can really give you info on it because every house, and room has different acoustics. The walls, insulation, carpet or bare floors, basement or main floor are just some examples of what can make a difference in sound reproduction.   By the way NHT (Now Hear This) are excellent speakers. For bass and treble, the music I listen too requires a high treble content so I usually have it at 7 out of 10 but my bass is at 4 out of 10.   The sub base should be fine where it is.
Did your receiver come with an Audessy mic for calibration. I would use that for a basic setup and go from there I am not sure if on your unit it will do frequecy but I think it did.
Your volume settings look fine again personal preference there is right or wrong.
For you listening mode Preset you should have an auto setting I am at work so it may take a coule of hours for me to get back to you as I have to go through your manual and see what you would set it up with so please bare with me. I will list the info as I read it so it may not be in the order you have it.
I will have to make a second post since I can't go back and edit this one.

Help need for badi method me_process_po_cust~check

Dear All expert
Pl see following thread
I am stuck
Help needed
http://scn.sap.com/thread/3610303

See the issue here is HOLD feature in PO should not be there if it meets the error condition.
For this you can refer another BADI for this purpose ME_HOLD_PO.
Refer one of my previous threads below , it might be helpful :
Held Purchase order need not be created.
Reiterating a thread related to same topic is not a good practice.

Help needed in Connecting to SAP From Eclipse

Hi All,
Currently, we have a requirement where we need to retrieve data from SAP System and need to upload the same in a Third Party Application (Java based system).
We are able to create an account in Java Application using Eclipse IDE by hard coding the Account details. We are stuck up in establishing the SAP connection and retrieving the details and then creating the extracted account details in Java application from Eclipse.
Any pointers on this will be of great help.
Regards,
Eureka

Hi Eureka,
Please refrain from creating cross-posts in parallel forums, moreover this question is JCo-related and is not directly connected with Java EE 5. The Help needed in Connecting to SAP From Eclipse in the Java Programming forum would be enough. Please continue the discussion there.
Regards,
Vladimir

T400 - Accidentaly formatted the disk 1 (IMD-0) partition in disk management - Help Needed

Hello,
Initially when I re-formatted my computer to get rid of the factory image, I found that there was a hidden partition of 1.37GB which I could not touch, meaning i could not delete. I ignored it at that time and formatted my computer and reinstalled vista business on it using the license i got from lenovo. Now after some days, I was kind of getting concerned as to what exactly was the 1.37Gb partition on my computer. I guess I was getting worried as to why I was not able to reclaim that space for normal use. Today, I tried to reclaim it, by deleting the volume, thinking it should merge into the unallocated space, that I have on my primary hard drive. But it did not. However, what happened was that this space of 1.37GB did start showing up on My Computer, once I formatted it using NTFS. I then checked its properties in My Computer and it had an option of readyboost. I selected the option which says use this disk for readyboost, and immediately in no time, the disk was full with on 68MB remaining as free space. It also has an icon of readyboost in the drive, when I double-click it. This is when I figured that this space could be on a separate physical disk. I did some research and found out that this drive or device or chip, is listed as Disk-1 in disk management and as IMD-0 under Disk Drives in Device Manager. I googled about it, and found that it was related to the turbo memory. Now, I believe that turbo memory would be a separate flash chip, which would be hardwired to function in a particular way (enabling boosting speeds), and that it would be non-accessible to users from within windows for formatting or doing anything else. Hence, I also believe that the space which I reclaimed, is existing on my primary 320GB hard drive and is used in addition to the turbo memory, as a cache, to boost speeds. However, since I do not understand the turbo memory concept very well, I would really appreciate if someone could explain how the turbo memory works, i.e. including IMD-0 and all that. And the main help I need is on how to hide the 1.37GB partition again, and put it in a format that it was earlier in, and usable for turbo memory. At present I do not know if it is being used by turbo memory or not, but below is the current status of the turbo memory:
1. In Device manager, under disk drives, IMD-0 shows up, and in properties it just says device type -- disk drive. Now I read somewhere that it should say NVCACHE, but it does not say that on my pc, under any tabs of the properties of IMD-0. Can someone help me putting it back there.
2. Under Disk Management, it says Local Disk H:, 1.37GB NTFS, Healthy (Active, Primary Partition). I don't exactly remember, but I guess prior to me formatting it, it said unallocated. Help needed here too.
3. In the Turbo memory controller, it says Windows readyboot enabled, Windows Readydrive enabled, 2GB
and below that I have checkboxes for enabling windows readyboost and readydrive checked.
So guys, can please anyone help me in re-hiding the 1.37GB partition and making it in the state it was before.
Thanks a lot for your help.

Hi Eric,
Please refer the following HP article to expand your array , refer the TechNet article to expand your drive:
HP Proliant Servers - How to Expand an Array and Extend the Logical Drive
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03510253-1%257CdocLocale%253Den_US&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=4231377&ac.admitted=1411638027623.876444892.199480143
TechNet article:
Extend System/Boot Volume on Windows Server 2008/ Windows Vista/Win7 Beta
http://blogs.technet.com/b/mghazai/archive/2009/02/24/extend-system-boot-volume-on-windows-server-2008-windows-vista-win7-beta.aspx
Extend a simple or spanned volume
http://technet.microsoft.com/en-us/library/cc776741.aspx
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Approver related help needed

Similar Messages

Maybe you are looking for