Apps Installed Notification

Hi
I used to see in the right hand Top Paid or Free Apps menu (installed) on apps that I already have. It seems to have disappeared and does not display this message. Anyone encountered the same problem?
Thanks

Select Purchases from the menu top of the App Store window.

Similar Messages

ITunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined

I have a 3rd generation iPod touch. I just downloaded the IOS 5.0, I seem to have all the features (reader, notification center, newsstand, etc.), but I recently experienced a problem.
After getting the update and restoring my iPod, iTunes started reinstalling all my music, apps, and videos. It reinstalled all my apps last, and before that, I used iTunes to delete a lot of them and organize them into folders. I then re synced it. Midway through this, I had to leave, but I had heard that I could sync my iPod wirelessly if it was connected to wifi and an outlet, so I checked the little box and tried this. However, I then got the error message "iTunes cannot sync apps to the iPod '______' because the apps installed on the iPod could not be determined". All my songs, videos, and 5,800 photos are on there, but half my apps are fully synced and usable, while the other half shows up with a loading bar at the bottom saying "waiting".
Yes, I have the "Sync Apps" box ticked.
Yes, my computer is authorized.
Yes, I have verified that all the apps are in my iTunes.
Yes, I tried plugging my iPod back into iTunes and manually syncing it.
I would simply restore it and resync again, but the majority of my photos aren't on my computer, so if I did that, they would be gone. After I installed the IOS 5.0, and my iPod was restored, it automatically put all my photos back. If someone can tell me whether or not this is something that's automatic whenever you restore your iPod (whether it be manually from iTunes or from an update), that would also be greatly appreciated.
However, what I'm looking for is simply a way to get my other 80+ apps back in working order without having to restore my iPod or anything too complicated.

EDIT:
I tried restarting my iPod... now it just says that the iPod cannot be synced because the required disk cannot be found.
This update is seriously frustrating. I've heard from a lot of people that the wifi iTunes sync isn't working either.

How to clear apps from notification center?

Is there a way to reset/clear apps from notification center? My facebook notification ain't working and i want to reset notification center.

Yes, it does.
Tips for clearing that unread message... try them in order.
If you have a rogue New Message icon on your Homescreen, or a negative count (-1), any one of these solutions could clear it, or reset it to zero:
Try these options:
* Hard Reset the BlackBerry by holding ALT, CAP (right Shift key), and DEL (or with the BlackBerry powered ON, remove the battery and reinserting the battery)
* View Messages > Saved Messages
* View Messages > View Folders, check each folder (missed calls, SMS in and out boxes, MMS in and out boxes, Saved, browser, phone logs etc)
* Scroll to top of message folder, over the date heading, click or press menu to MARK PRIOR OPEN
* Change your theme and see if it persists, and change back to your desired theme. (Options > Theme > select.)
* Wipe and reload your OS.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Facebook For iOS App Push Notifications Not Working

Been seeing a lot of Threads for this problem but with no proper solution.
Ever since I updated my Facebook App to v9.0, I havent had any push notifications come to my phone. I've tried uninstalling/deleting the app & other connected apps (Paper, FB messenger) , logging out of the iOS integration, Resetting my phone, etc. but nothing's worked. The App doesn't even ask me if I want to Activate Notifications anymore when I Re-Install it....
The Phone Notifications are set to show in the lock screen & all, and the Push Notifications in the app are set to push for "All Notifications", but On the Web client I noticed that I had "Some notifications" listed in the settings (and I can't change those on the web, because it tells you to change them in the app) . The only way I know i have Notifications now is through the App Badge,, via Email or through Paper's Notification setup (But i still dont get all of them) ...
I wonder if it could be a server issue on Faceobook's End. There has to be some way to fix this problem....Help!!!

Hi C_S1,
Welcome to the Apple Support Communities! I understand that you are having some issues with Facebook notifications on your iPhone. It sounds like you have already done some great troubleshooting. I suggest looking at the Troubleshooting notifications section of the following article just to verify your previous steps.
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection.
Note: Notifications use Wi-Fi only when a cellular connection is unavailable. Firewalls and proxy servers may affect your ability to receive notifications. For more information, see Unable to use Apple Push Notification service (APNs).
If you're not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
I hope this helps,
-Joe

Can't Get Mac App Store Notifications Working

I've noticed recently that I've stopped seeing the red notification icon pop-up on my Mac App Store dock icon as it should be doing. I also haven't seen any Mac App Store notifications pop-up in the Notifications Center for quite some time as well.
However, if I open the Mac App Store, it acknowledges available updates and shows the red icon at that point. Once available updates are installed, the red icon dissapears as expected.
I've confirmed this issue does not occur in a new user account and I've tried, with no success, to remove the App Store .plist files from my user library folder, from both the Preferences folder and the Cookies folder, then restarted the computer.
I'm wondering if there is some other settings file somewhere that could be affected in some way and causing this issue.
Any suggestions?

Check System Preferences->Spotlight->Privacy and see
if your boot volume is listed.
Something that can sometimes cause all manor of strange
issues with the MacApp Store is if the boot volume somehow
got listed in the privacy pane. The MacApp Store app uses
Spotlight data to dertermine updates.

Turn off app update notification?

Have several installed that rarely get used and see no need to either delete or update.
Can one turn off app update notifications (store icon)?

However, you can delete them but leave them on the computer. I've done that with quite a few. That way, you can get them back easily.

How to respond to install notification?

Hello.
Can anyone tell me how a server should respond to install notification from a MIDlet? My server does nothing and my Nokia 3650 complains.....
Thanks

Hi, thanks for the reply.
The thing is, I know it's not a required attribute but I've got a feeling it could be handy - I like the idea of keeping proper tabs on what's going on! The delete notify one appeals to me for the same reason.
Imagine getting two install notifications from a particular user without getting a delete notification in between...does that mean they have somehow managed to install the app on more than one phone? Because when you get down to it, it's not overly difficult for someone to get a MIDlet off one phone and onto another. Hmm..having said that, I just realised that they could fiddle with, or remove, the install notification URL before installing the app on another phone anyway.
I installed a program on my 3650 the other day, one for the Symbian OS. To download the app I had to enter the phone's serial number. Wish you could use that sort of check in a Java app.

App updates notifications

Hi everyone,
I’d like to open up a discussion about app updates and how you would think this working. The challenge here, is while you’re releasing new versions for your apps, how would you think customers should know about it? And while we’re here, should also business owners know that there is a newer version of the app?
There are a multiple options here, with ups and downs:
Emails to partners – app market will send a and email to site partner every time a new app version is available; this is a targeted message, received by the partner (who is the one building the site) and it’s consistent in providing the same level of notification for all apps, regardless of who developed them; the downside is the email sometimes get lost
In-app notifications – app developer provides a notification mechanism into the app, that notifies users that a new version is available; for someone using the app, this is really visible; however, the downsides here are that business owners will also see the notification, apps will not be consistent unless all developers will implement the same notification system and the most important one, the partner will likely not see it, cause partners don’t log in to customers site that often
In partner portal site list – update the site list interface to show notifications in there that there are updates for the apps installed in the site. This is convenient as it’s only displayed to partners, and might be more visible than the in-app notification as partners log-in more often to partner portal
Anything we’re missing here? Some other option?
Thank you,
Cristinel

I am going to chime in and I must agree with Liam.
I am a small partner and majority of my clients want me to handle all of the work for them, however, I am picking up new clients who want to manage their sites and involve me only when absolutely necessary. For instance when a new page with some new functionality needs to be created, they call me. Otherwise they do it themselves.
The one of the concepts behind BC apps is it allows you in install functionality into BC quickly and easily. Lets take a simple example, a homepage image slider. There are three options here:
1) I build the slider using code and it isn't editable by the client. To update it you must work with code (which the client doesn't know). Thus the client has to call me to update the slider.
2) I build a webapp slider for them to use, but this will take X amount of time and be billed to the client. Total estimated cost for client $50 - $100.
3) I install a slider app into the site, quick and easy. The client can then update the slider as necessary. Cost: Price of app ($29 for one on the app store as of this writing.)
Lets assume the client wants the app. The client must contact me first, which may or may not be easy for the client. (Can depend on how the partner handles client inquires.) I then have to install the app and then bill the client for the app. Depending on how the partner is setup they may even bill the client to do something that took five minutes and a couple clicks. This, to me, is unfair to the client though the partner has the right to markup the apps.
If the client could install the app themselves there would be no need for the partner to be involved which, for me, would be less hassle for all parties involved.
I really believe anyone should have the ability to install the app. Otherwise I believe you will restrict the BC App Store.
Wordpress is popular because it is easy to use and almost anyone can build a website with a few clicks by using wordpress plugins or apps. No need for a developer/partner to be involved. BC has this potential, and while I believe having a partner's help is beneficial it isn't required.
Also there is a lot of people out there who will use BC with Creative Cloud and/or Muse who may not be partners. They can build a decent looking website and would be able to extend the abilities with apps, if they could install them.
If absolutely necessary you could implement an option in the Partner Portal which would allow partners to turn off the customers ability to install apps. This would give those who want their clients to install apps the ability and others who don't to restrict them. To me this could cause confusion for clients but is a possible option. If this option is implemented then a notice to the client on the app store would be needed altering them before they could purchase an app to contact their partner.
Also Dale mentioned above: "...which is that updating the platform on regular intervals is not required with BC." This is still true for the BC Core. Apps are different in my opinion. For instance I have a slider on a site that when IE 11 was released caused problems with this slider. I had to update the slider to fix these bugs. Having apps update is the same concept. New version that fixes bugs and adds new features. It is all in the way it is presented to the client.
About notifications:
I like a couple of Dale's suggestion. The auto-update would be a nice feature but can be dangerous depending on the app. What if the app removes functionality you have been using, thus you don't want to update? Some apps it would be beneficial for auto-update.
I also like the indicator idea. While it may not be possible now, is there any reason it couldn't be written into the API to allow this type of notification to be added to the admin? I know you can customize the admin because I have used the Solid Admin Menu that is on the BC App Store now. Adding this ability would be great. Again some control for partners may be wanted to disable app update alerts.
Finally I know the system that I like is what I have seen with the Envato Network of Websites (Code Canyon, VideoHive, Themeforest, etc.). I have a box I can check that allows me to receive emails if the item is updated. This is an email notification in this case. See screenshot below:
Thank You Alexandru, Cristinel and the BC Team for your hard work.
Lynda

CS3 InDesign & Illustrator Install Exit Code 7; Other CS3 Apps Install Fine

I feel like I'm beating a dead horse... (no offence to horse lovers out there - it's just an expression)
I'm having trouble performing an silent install of the CS3 suite from a network share on Windows 7. I've read through a number of posts on here, one of which was a 3 page post on this issue where Mac & Win 7 users alike posted failures, successes and how they got there, and another about removing the OS check feature from the application.proxy.xml file (which didn't work for me; unless I did something wrong...?) Unfortunately for me after trying much of what was suggested, I'm still facing a brick wall.
All these machines are Core 2 Duo's clocked at no less than 2.2GHz, have 4GB of RAM, have over 100GB of free disk space and are running fully updated/patched installations of Windows 7 32-bit (x86) with Office 2007 Enterprise.
When I try to install the suite silently it fails with 'Exit Code: 7', which according to the CS3_Deployment.pdf means "Unable to complete the silent workflow." If I take out the "--mode=silent" switch, the GUI launches and installs fine. I took a look at the compressed log file & searched for "Return value 3", "ERROR" and "FATAL" for clues, but its vague and nondescript. I didn't copy/paste the entire log in this post for brevity's sake, but you can check it out here:
Condensed Version: http://pastebin.com/eFKpe9wK
Unabridged Version: http://pastebin.com/MQDeQZmF
Instead, however, I do want to touch on just a few things from the log:
[    9660] Thu Dec 02 07:08:13 2010 INFO
BEGIN Setting requested payload actions
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {AC76BA86-1033-0000-7760-000000000003} Adobe Acrobat 8 Professional (At install, older versions get upgraded) per deployment file.
Setting action for {7BB7F66A-D798-45A3-A383-0727FB1EBF8E} Adobe Flash Video Encoder per deployment file.
Setting action for {abd781e6-d5ca-45aa-a5f7-f64799eb1c04} Adobe Version Cue CS3 Server per deployment file.
Setting action for {00E5C764-9525-44C3-8404-712AD06AE12A} Adobe Dreamweaver CS3 per deployment file.
Setting action for {3BC8460B-085E-47F3-9C62-8FFCBAF11D78} Adobe Flash CS3 per deployment file.
Setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Illustrator CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe InDesign CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Photoshop CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium per deployment file.
PayloadPolicyNode.SetAction: IY->IY for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium
[    9660] Thu Dec 02 07:08:13 2010 INFO
END Setting requested payload actions
[    9660] Thu Dec 02 07:08:13 2010 WARN
Some payload actions specified in the deployment file could not be applied.
...snip - snip...
[    9660] Thu Dec 02 07:08:17 2010 INFO
Checking bootstrapper progress
Ran uninstall for the bootstrapper due to an exception
[    9660] Thu Dec 02 07:08:17 2010 FATAL
Exception: Payload actions could not be set. Search the log for "BEGIN Setting requested payload actions" for details.
Exit code: 7
[    9660] Thu Dec 02 07:08:17 2010 INFO
I've got some initial questions that pertain to what's in the log file:
The areas in bold: Since the same install also fails on Windows XP machines, what does this mean exactly?
The areas in italics: Can anyone expand on what that means?
The underlined areas: What 'Policy' is this referring to: Setup's own internal policy (like the OS check) or something else?
Here's what I've done so far:
Went through the 'Run a silent installation of Adobe Creative Suite 3' document
Went through the 'Troubleshoot installation with install logs | CS3, CS4' document
Used the Adobe Support Advisor to go through the logs, but it always says that no problems are found.
Recreated the install & uninstall XML files, twice, via the "setup.exe --record=1" method for each application & the entire suiteNot that I think this is important, but I was never prompted to enter a serial number when creating the .XML files.
Renamed the XML files for each application (e.g.: Photoshop-install.xml; CS3Suite-install.xml; Flash-remove.xml etc.)
Copied the XML files to a common folder on a network share (e.g.: \\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs)
Created install batch files for each application, including the suite, that install via the following command"\\path\to\Adobe\Design Premium CS3\Adobe CS3\Setup.exe" --mode=silent --deploymentFile="\\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs\Photoship-install.xml"
Tried the installs with & without the "--skipProcessCheck=1" switch but there's no change.
No applications are running during the installs.
Verified my application.xml.override file was in \\path\to\Adobe\Design Premium CS3\Adobe CS3\payloads\AdobeDesignSuitePremiumen_US_Volume
Verified I didn't have any strange characters in my application.xml.override fileI deleted and manually retyped all double quotes just to be sure.
I noticed that the "installSourcePath" property in the install.xml files created point to a local location rather than, what I would expect to be, the installation source folder where I copied the contents of the DVD to. On a whim I changed it to point to the copied DVD files but that didn't seem to help either so I changed it back.
FROM: <Property name="installSourcePath">C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804</Property>
TO: <Property name="installSourcePath">\\path\to\Adobe\Design Premium CS3\Adobe CS3</Property>
Aside from Acrobat Reader 9.4.0, Adobe Flash Player 10 (ActiveX & Plugin) and maybe Shockwave 11, these machines never previously had any other Adobe products installed.
For what its worth, uninstalling Acrobat Reader 9.4.0 doesn't seem to help either. I didn't try removing Flash Player or Shockwave [yet].
Using the install XML files I created via "setup.exe --record=1", when I run installs for the individual applications silently [via batch files] one at a time, all applications install fine except for Illustrator and InDesign: Exit Code 7.
This may further help suggest my application.xml.override file is fine.
Even more interesting is that I get the same error on Windows XP and Windows 7 machines alike. (See the image below taken from an XP machine; the same happens on Windows 7 machines so it doesn't appear this problem is OS specific.)
Other than removing Flash Player, Shockwave and ripping out our Anti-Virus solution (Sophos), which is going to be difficult, is there anything I've missed?
Anyone have suggestions on why Illustrator and InDesign don't install?

I spoke with Adobe Support today and was directed to this support article:
CPSID_84332 - http://kb2.adobe.com/cps/843/cpsid_84332.html
Although this article speaks to CS5 installations, even though I thought I made it clear that I was working with CS3, I decided to give it a shot anyway.
The first comment passively suggests troubleshooting [all] "install errors using Creative Suite 5 install logs", which links you to CPSID_84451 - http://kb2.adobe.com/cps/844/cpsid_84451.html. But again, its CS3 I'm having trouble with and I've already linked, what I believe to be, a more appropriate CS3 [and CS4] log troubleshooting document in my first post.
Step 1 requires restarting "your computer in a minimized state before running the installer." - This isn't at all optional nor ideal when we're talking about silent installations, especially when they can take place in the middle of the day - its highly distruptive, or deployments in general. Plus, I'm not interested in developing a package that will perform the steps outlined and then undo everything. Its important to note that this isn't a one-off problem: every machine that needs to have CS3 installed experiences this problem. But for what its worth:
I did as instructed in the troubleshooting documentation but it didn't work.
No other applications fail to install, and all but these lone Adobe CS3 apps install fine; what gives?
Step 2 is to perform a repair installation of the Windows Installer. (FYI: Windows 7 ships with 5.0, my version is 5.0.7600.16385, and for the record there doesn't seem to be a redistributable download available at this time.) I can't use this as part of my silent installation package because it calls you to run `sfc /scannow` which is time consuming and, if something is found, often requires a reboot. Fortunately for me, "Windows Resource Protection did not find any integrity violations."
Step 3 is to preinstall Adobe Air and the AdobeHelp payloads:
AIR isn't part of the CS3 DVD, it has to be downloaded & installed silently (via -silent -eulaAccepted if you don't have the redistributable package); this was done but didn't help.
There isn't an 'AdobeHelp' payload, only 'AdobeHelpViewerAll', which will not allow a manual instalation so I can't do that.
In summary, these tips unfortunately did not solve the problem.

IPhone stuck in reboot loop - too many apps installed?

Hi guys!
Starting some months ago, I've had nothing but problems with my iPhone. However, I've been dealing with most of these or even solved them.
But now I'm stuck on a reboot loop for a few days and don't know what to do.
When did it start? I think it was in May when I first got panic.plist, ResetCounter and SpringBoard-CrashLogs under "Diagnostics and Usage". Following this, everytime I rebooted my phone or the battery was empty, it could take some more minutes than normal for my iPhone to boot. This loading time increased and increased, in October it once took more than two days for my iPhone to reboot. I now have really thousands of those ErrorLogs. The Apple support on the phone couldn't help me either. Additionally, the phone performed some cruel changes I can't explain: Once the language was changed, once the photo gallery had to be restored (the iPhone did that on its own).
However, sometime in November the iPhone crashed, and I was already thinking that it would now last a few days until I could use it again. But somehow it was done within 15 minutes. Without any error or reboot loop. The last two months I haven't had any problems with this until the battery was empty three days ago.
Since then, I have had the iPhone plugged in so the battery doesn't get empty and it's stuck on the bright Apple logo. After about 210 seconds the logo gets dark, then the screen is completely black and it's starting the same procedure again. Sometimes I get the vibration, sometimes the loading circle (white wheel of death!), but everytime it just starts over again.
I am pretty sure this problem appears because I have more than 1300 apps installed (yes, this is a very huge number, but I remember Steve Jobs saying that, with the folders in iOS 4, it would be possible to have a few thousand apps installed), 4000+ photos, and so on. I am pretty sure it's not a hardware, but a software problem. In detail, it's about the SpringBoard. The iPhone 4S only has 512MB RAM, so it's hard for it to load 1300+ app icons into its memory (which it has to because the SpringBoard has to run without any lags). Only in some cases it's able to boot that up, but I have absolutely no idea which cases these are and why it has run well for the last two months, but beginning with the new year stopped to work.
Furthermore, the panic.plist entries all say that the problem is a watchdog timeout. Apple's iOS seems to allow the devices only to take up to two minutes (always around 120 seconds in the CrashLogs) to boot up, then probably another 120 seconds to launch the SpringBoard process (which explains the watchdog timeouts in the SpringBoard-CrashLogs).
I will not restore the iPhone because I unfortunately haven't backed up for a long time and there have been many data changes since the last backup.
So altogether, I tried to collect all the information I know here, but that's really not enough. Apple unlikely wants to help me, the phone support was really nice, but even asked his superior, who couldn't help either.
My questions to you folks now are: Do you have any more information regarding panic.plist's, watchdog timeouts or reboot loops?
What would your advice be? Any chance to get onto my data and back it up? Or is waiting the best solution?
Would it be better to try several hard resets, or let the battery run empty and start the whole process again, or just let the phone plugged in so it tries to reboot on and on until it's hopefully successful sometime?
And: Would it maybe increase the loading time if I would take the SIM card out of the iPhone, so the chance to have an successful try would be higher?
Note: I am still using iOS 5.1.1 because I am completely sure that I'd have to buy an iPhone 5 to run 1300+ apps on iOS 6.

Okay, some more information about this.
Apparently there is a 'watchdog' that listens whether the iPhone's software responds or not. If it doesn't, it forces a restart, and also creates a panic.plist entry (under Diagnostics). Unfortunately the responding time is only 120 seconds. The problem I have now is the so called 'Application Map'. To ensure a smooth browsing through the different screen filled with apps, this map is regenerated everytime the user installs a new app or deletes one. Because I have more than 1300 apps installed, generating this Application Map usually takes more than two minutes. I can only hope that sometime in the next days my iPhone will be able to do this in less than 120 seconds (like it has done that several times before).
I still can't explain why everything had been working great during the last two months. I have probably installed some new apps, but also deleted other ones, so the number of total apps didn't really increase heavily.
However, I've read about some possible solutions to this problem (without restoring - which would solve the problem only temporarily anyway):
Hard-resetting the iPhone until the screen is completely black, then wait a few minutes, then turn the device on. It's possible that this has to be repeated several times, but for the user who posted this it resolved the issue.
For all the (in this case lucky) guys with a jailbreak: SSH into the iPhone, then temporarily move the watchdog located under /System/Library/SystemConfiguration/mobilewatchdog.bundle to a different folder, the iPhone will boot up after a few minutes. Then just move the watchdog back. It's a shame that apparently jailbreak users can resolve this issue, while normal users can't.
I also want to note that this problem has been appearing since iOS 2, which came out more than four years ago. It would be really no big deal for Apple developers to change the 120 seconds to e.g. 300 or even more. I've found hundreds of threads, not only here, where users complain about exactly the same issue. I don't have any hope that an Apple employee will ever read this, but if so, please keep that in mind. I don't understand why Apple has done nothing to solve this issue.
However, if you have any more ideas, please reply here. If there's anyone around here who has managed to successfully install more than 1300 apps on his iPhone (or iPod touch), please post that.

I have problems accessing apps installed in my iPad through iTunes 12

I have several apps installed in my iPad, among them Adobe Reader and AVPlayerHD. With the previous version of iTunes it was easy to access these apps and upload content directly to the apps in order to see this content on the iPad 3rd gen, model MD368B/A.
Now I can't even find a way to access the apps via iTunes!
I see the Apps item on the menu on the left side column. Click there and I see a list of apps on the right side. Click on Adobe Reader icon for example and nothing happens. In the previous version of iTunes I could see the icon, click on it and there would be an area where I could either drag content to it or click a button to upload it. Now that functionality seems to be hidden or has disappeared.
To say this absolute disregard to the user experience from Apple is frustrating is an understatement. Why does the company insist on being this disrespectful to us users' time? Why should I have to put effort into 'learning' how to navigate a new interface when all these changes from the previous version seem superficial, irrelevant and just plain idiotic? There seems to be absolute no advantage to this new user interface.
And I used to love Apple. I have used its products for more than 20 years. In part that's the biggest annoyance. There is really no alternative, so if they keep messing with these absurd interface changes and lack of awareness and respect for the user's experience there's little to do about. Except rant like this on such a forum. Is there any hope anyone from the company might ever listen?
Any help with finding the way to upload content to Apps installed in my iPad via iTunes would be very, very much appreciated.

Try this Re: Wi-Fi Sync not working in iOS 5

How do I delete an app installed with an old iTunes account?

How do I delete an app installed with an old iTunes account? After syncing my iPhone with iTunes, the app is not listed in the App section.

To delete an app from your iphone, press and hold any icon until they all start wiggling. Apps that you can delete will have a circled x in the top left corner of the icon. Tap that circled x to delete. Tap home button to stop the wiggling.

HT204088 Why does AppStore crash when I try to return to Utilities category after viewing a second or third app (AppStore quits ,iPad (1.1) goesto home page with AppStore on it. 20+ of 32GB available, 28 apps installed, iOS 5.1.1 (says sw "up to date")

My ipad(1.1) jumps out of Appstore after I've viewed 2or 3 apps, seems to be happening more often now. It returns to the page the Appstore icon is on. When I select Appstore again, it opens on the page of the last app downloaded, then I can return and browse Utilities category until next crash. It has 20+ GB available of 32GB, 28 apps installed, I don't use iTunes. I don't know what OS is installed, it's not cellular enabled. I haven't checked other categories and unsure if reducing open browser tabs affects the problem, possibly lets Appstore run longer before crashing. It always crashes when I attempt to return to the category. OSVersion is 5.1.1, Update Check says software is up to date. It has crashed if I scroll thru the pages of apps too fast.

If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below to select it:
syslog -k Sender kernel -k Message CSeq "I/O error"
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.

How do I get rid of BB App World Notification?

I just got my BB last night, so I'm very new to this, but I did the update on the BB App World, and there were some apps that I did not want (such as Yahoo Messenger) that it kept coming up that there was an update available for... so I uninstalled those apps... but the Black Berry App World notification keeps coming up saying that there are updates available for those apps. Do I HAVE to reinstall and update them, even if I don't want to ever use them? It's annoying that it shows up with my new messages all the time.
Sorry if these are stupid questions, only had the BB for less than a day!
Update* I reinstalled the apps, and the notifications are still there... and I click on them, and updating isn't an option anymore... just Reviews, Recommend, & Screenshots... I can't get rid of it!

Hi and Welcome to the Forums!
From your post, I can't quite tell where this notification is coming up. If it's on your homescreen (at the top, where the VM, new message, etc. notifications show), then the resolution will be different. Check this image for what that notification will look like:
If it is indeed that one, then you need to find, in your Messages, a message from AppWorld -- deal with it (read, delete, etc.) and the notification should go away. If you can't find the messages, then try a search:
KB21879How to search for unread messages on the BlackBerry smartphone
However, if the notification is within MyWorld itself, then the resolution might be different. It's actually quite odd for AppWorld to continue to notify for uninstalled apps...are they actually in the uninstalled section of MyWorld? In any event, try this clearing the AppWorld application cache:
1. Open App World
2. Go to My World
3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
3b. For Storm/Pearl -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
4. If your BB locks after issuing the cache clear, perform a battery pull reboot
5. Return to AppWorld. Log into MyWorld (if applicable) and try again.
Hopefully it'll work for you! Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I install apps on a device that has a "for work" app installed?

Hi, I have an iPod touch version 4.3.5 (ML1). Model is MC540C.
It has been provided for me from work, but I can use it as I wish.
The apps that are installed are:
Facetime
Music
Photos
Camera
Videos
YouTube
Stocks
Notes
Weather
Utilities
App Store
Game Center
Settings
Contacts
iTunes
Safari
Maps
Mail
Calendar
"one app installed by company"
The last app is needed for when I do work. It doesn't need to run on the background. When I'm doing work, I need to input some information in that app, and sync it to my company's server.
I would like to install some apps (free) of my choosing. But I'm coming across a hurdle...
I choose "App Store" in Home.
I search for a free App (for example the Google Search app by Google Inc)
I'm taken to the app's info screen. I tap the blue "Free" button.
The button becomes a green "Install App" button.
I get a pop-up box saying
Apple ID password
[email protected]
[password]
How can I install apps of my choosing without having a "work app" get deleted? This work app was installed on the "[email protected]" Apple ID.
Thank you.

Ingo2711, when you did this:
I logged out of my AppleID on the iPod, took it to his computer, synced it, which erased all of my apps. I installed the default apps plus one app that he bought using his account info.
You made his computer the syncing computer.
When you did this:
Connected to my Mac and iTunes and tried to sync one of the apps I bought with my account. The app shows up on one of the pages before you start the sync, but once you apply the sync, it does not transfer.
And, of cause, no restrictions set at all.
You changed syncing computers but you can only sync apps (and some other things like photos) from only your one syncing computer.

Apps Installed Notification

Similar Messages

Maybe you are looking for