Apps installed on other devices not auto-installing on iphone

for a while now I have noticed apps installed on my other devices (an older iphone and ipad3) do not auto install on my iphone 4 like they used to... automatically.
all settings are so they should install ?
is this a bug?
thanks

Yes my ID is authorized. It's the same iBook I've been using since I've had the phone. It's always sync'd without issues before

Similar Messages

My "Notes" app on my iPhone 4S is no longer syncing up with my "Notes" app on my PC or on my iPad. It was syncing up fine before. But no longer. How do I fix this so that whatever I type in iPhone "Notes" will appear in my other devices' "Notes"?

My "Notes" app on my iPhone 4S is no longer syncing up with my "Notes" app on my PC or on my iPad. It was syncing up fine before. But no longer. How do I fix this so that whatever I type in iPhone "Notes" will appear in my other devices' "Notes"?

See Recover your iTunes library from your iPod or iOS device.
tt2

UPDATE BLUETOOTH APPS WORK FOR OTHER DEVICES

HI IM USING IPHONE 4 PLZ
UPDATE BLUETOOTH APPS WORK FOR OTHER DEVICES
BLUETOOTH APP COMPLETE IPHONE MAKE NO 1 SMART PHONE ERVER
plz

These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/iphone.html

HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

Very simple. Turn off Find my iDevice, then Tap Settings, General, Erase, Erase all content and settings.

Is it possible to download ÿōür purchased app into ÿōür other device by signing in iTunes?

Is it possible to download ÿōür purchased app into ÿōür other device by signing in iTunes?

yes. But I would recomend using Icloud. If you have purchaed the app or ownloaded it you can serch it on any of your other devices app store and you will se a different icon where the download button is suposed to go. Like a cloud. Click it and you will get it.

TS1398 Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end.

Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end.

You can't change it - just try aagain.
https://discussions.apple.com/index.jspa
Where you find these options:
Notebooks
MacBook Pro
MacBook Air
iBook
MacBook
PowerBook

Automatically upgrade any superseded versions of this application not auto installing - Status always waiting for next maintenance schedule

Hello,
I'm trying to deploy an application to a user group with the option checked for "Automatically upgrade any superseded versions of this application" but it never auto installs.
- The application is set to install to system whether the user is logged on or off.
- We do have user affinity, therefore the user does have a one or more primary devices setup.
- If I run the install manually, it will superseded and install the new application and uninstall the old applications.
- The estimated installtion time minutes is set to 0
- The maxmimum allowed run time is set to 120 minutes.
We're on version SCCM 2012 SP1.
My assumption of how it should work
If the user is logged in or NOT and it's during the maintenance window, it should auto install the application. Maybe I'm wrong.
Here's the scenario.
User JohnDoe has application Viewer 1.0 installed on his machine. He installed this app via the SCCM application catalog. We now need to deploy Viewer 2.0 of this application. I want to ensure when it's deployed it replaces Viewer 1.0 hence
the reason to check the "auto upgrade.."check box.
Here's what happens. In software center, it will pre-downlaod the software and then set the status to "Waiting for next maintenance schedule". The problem is that the status stays like this forever. We do have maintenance windows set
on the device collection that JohnDoe's primary device is part of. Here are our maintenance windows.
- Daily - 9PM to 5AM = 8 hours
- Weekly - Saturday - 12:00AM to 12:00 = 24 hours
- Weekly - Sunday - 12:00AM to 12:00 = 24 hours
Coordinated UTC is not checked.
The business hours in software center are set to 5am to 10pm.
One would assume that it would auto install during the night since we have a big maintenance windows. I checked the ServiceWindowmanager.log and it does seem to show the various maitnenance windows.
Here's what I've tried
- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
- If JohnDoe clicks install in Software center or application catalog, it works. There's nothing wrong with the packages. The issue seems to be related with the maintenance windows.
- If I disable the maintenance windows, then it seems to work but only when I'm logged in. It still does not work if I'm logged out. It only kicks off the installation when I login if it's not during the business hour set in software center.
We need the maintenance windows since we don't want windows patching to occur during the day.
- I searched and ran the report to ensure there's not another maintenance windows setup that would prevent this from installing.
Our current workaround
To ensure users are using the latest version, we deploy the application required for a couple of days, then delete that deployment once we reach a high 90%. The problem with that is if some computers are turned off, they would be using the older version
and it will never get upgraded unless the user installs it manually.
Has anyone encountered this? Any other log files I should look at? Anything else I should verify ? I know in SCCM 2012 R2, you can set the maintenance window to only apply this schedule to software update (patching) but that option doesn't seem
to be available in SCCM 2012 SP1.
Any help, suggestiong, I will take. Thanks.

- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
Re-check your deployment, specially the user experience:
If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
maintenance windows.

Printer trying to install under other devices and fails

OK, this is an annoying issue.
Probook 4730s with Windows 7 Pro64
HP OfficeJet 8500 A909g all in one wireless.
EVERYthing is working just FINE except everytime I start the computer for some reason the 'other devices' section of Device Manager tries to install printer software and fails, then leaving numerous/repeating versions of OfficeJet Pro 8500 A909g failed software attempted installs.
It happens everytime I start the laptop and it's very annoying.
Simple question. How can I stop this from happening?
Everything else in the system including full use of the printer/scanner/wireless or hardline hookup is AOK.
Thanks in advance.

Any other takers?
I suspect the printer is being picked up by Windows in the startup process and is being identified as an 'other device.' It's probably also causing a small series of error messages in the event viewer i.e. an IP address not being provided in the allowed timeframe (which the printer is not able to provide through it's wireless signal) and the other 3 error processes associated with that failure.
When the machine boots it then tries to identify the source of the problem, which is the 'other device,' the HP printer. And then Windows unsuccessfully tries to install software under 'other devices' where printers don't belong and fails, leaving a trail of HP printers in it's wake under other devices.
Surely there is a simple cure for this annoying (and currently only) issue I have?

MSI P4M900M2 - MSG : MPU-401 Compatible MIDI Device not manage Install

Hi,
I just Re-install my PC to Windows XP and all the drivers had installed. Only have problem with this : MPU-401 Compatible MIDI Device unable to install. Any one had come across this issue, please kindly advise.
Thank you very much.
Desmond

Do you got sound at all?
Does the Audio Controller is enabled in BIOS?

Mountain Lion not auto installing

Downloaded onto MBP after succesfully installing on imac, but after installation complete on MBP nothing changed, it's still running 10.7.4.
Tried to re-start and still the same, any idea how to kick start the auto install again?

Downloaded onto MBP after succesfully installing on imac, but after installation complete on MBP nothing changed, it's still running 10.7.4.
Tried to re-start and still the same, any idea how to kick start the auto install again?

How to install PSE-12 x64 vs auto install of x32?

I believe I followed all directions for install of PSE-12 from the Adobe PSE-12 DVD, but the auto-install puts the PSE-12 x32 version rather than the x64 version on both of my computers. Computer-1 is an HP Pavillion Elite HPE 180t with 12GB of ram and an NVIDIA GPX 550i graphics card and is running Win-7 x64 with all Win-7 updates loaded. Computer-2 is a new Acer Aspire V5-573P-9600 with 8GB of ram, Intel i7 CPU and Intel HD 4500 graphics adapter and is running x64 Win-8.1. Both of these computers appear to comply with the hardware requirements needed to run the x64 version of PSE-12. I upgraded to PSE-12 for the added features and capability ot run in x64 format as I do with Adobe Premier Elements. Is there a way that I can force an install of PSE-12 x64 on my two computers? Thanks in advance for any insight or assistance with my install issue.

PSE12 is only available in 32 bit on Windows at present although a 64bit version is avaiable for Mac OSX. It will automatically install in Program Files (x86)
PRE12 is available in 64 bit and will install in Program Files.

Audio and some other devices not working on compaq mini NOTEBOOK

A certain PCI device failed to install on my system. my pc cannot detect it and i think this has affected the audio and some other vital devices like battery meter, and ajusting the brigtness of the screen. i want to know if the device can be uninstalled and have some other drivers that will make the pc to work normally. The system also refuses to go on hibernation
Recent changes: i installed a PDF fill writer software which i have uninstalled
Name of product: Compaq mini notebook with serial number CNC0472C51
PRODUCT NUMBER: XE979EA
OPERATING SYSTEM- WINDOWS 7 32 -BIT

Thanks to edgmiw for the solution:
edgmiw wrote:
Run system update and make sure all your Thinkvantage utilities and drivers are installed properly.

Updating app's on other mac not working

Hi, hopefully anyone can help!
I'm using a minimac as base for itunes media and library. Next to that i use my macbook pro to play and organise this by using the library on the mini.
This all goes well for the music but not for the mobile app's. I can not find a method to update or download a new app on my pro and send it to itunes media on the mini.
I hope this information is sufficient to give me some tips.

2 possible solutions i can think of, 1 is to go to the 'Purchased' tab on iTunes store and just redownload the app, 2 is to connect the Macs across your home network and drag and drop to .ipa file to copy it across
Hope this helps

Mdr-nc31e or any other device not working anymore

Since a week now, the phone is not detecting my mdr-nc31e or even any other device plugged in the jack. I tried the smart connect thing but nothing. The sound is only coming out from the speakers. Pls help me out guys.

Still nothing I experienced some difficulties starting 2 months when plugging my headphones (all types), but they worked.Last two weeks, i dove with the phone under water. After that, i experienced this issue. But when i did the smart connect thing (a week ago), my MDR-nc31e were detected by the phone, and worked perfectly (but not the other headphones).But now, all of them are out. Maybe i should take it to someone from Sony Support. It should be a hardware problem, not a soft one.

How to setup new sync when other devices not avaliable

Firefox Sync creates a nice circle which you cannot get out of when you try to setup Sync and you don't happen to be sitting next to your other device. When you click "setup Sync" -> "I already have an account" it then presents you with a key to use on one of your existing machines to add this one (no machine nearby), so I click on the link "I don't have the device with me" which then asks you to sign in with your username and password and provide a sync key from an existing machine! DUMB. I suggest some way on the Sync Website to add the sync key for the new machine there or something. I don't happen to be home with my other machines, and am trying to setup a new machine. I do NOT want to setup new sync info!

Hi Madskiier,
My suggestion is to copy the Sync key and take it to the other machine with you. You can carry it on a USB memory or send it by email.

Apps installed on other devices not auto-installing on iphone

Similar Messages

Maybe you are looking for