AppStore and iCloud aunthefication problems (maybe hardware related things)

Hi. I have MBP (2006) with broken ethernet port but working wifi. I never woried about it cause I've used wireless everywhere.I had the interface "Ethernet" in the list of interfaces for years but MBP has not seen any cable plugged into it.
But after update to 10.7.x (I didn't really noticed when it had happened) ethernet interface has been missed from the list of interfaces. And at the same time AppStore stoped to work with my apple id with the message "Your device or computer could not be verified. Contact support for assistance". And now after starting iCloud services it doesn't work too: "This Apple ID is valid but is not an iCloud account"
My apple id is ok, I've checked it 4 times, everything is verified, I can buy applications and music at iTunes Music Store, authorize and deauthorize computers use it for iMessage on my iPad etc. iCloud works too on my iPad and at the website icloud.com — I can sync everything, backup to iCloud etc. But neither purchases at AppStore nor iCloud features works on my MacBook Pro.
I think its some eth0/eth1 related things, cause most of solutions for broken Apple ID on Macs are: "Remove /Library/Preferences/SystemConfigurations/* then reboot". I did it thosands of times but nothing happens. I tried to reset SMC but it doesn't work too — ethernet interface is still missing, AppStore and iCloud give me strange error messages and doesn't work.

Right - I have tried booting the MacMini using Chameleon.  Using these instructions: http://forum.netkas.org/index.php/topic,1123.0.html it boots.
Basically, Chameleon can be made to work if you re-format your HD to use a MBR boot sector.  Even the latest Chamelon (Chameleon_2.1svn_r1686_trunk_pkg) can be made to work by using a minimal org.chameleon.Boot config (i.e. not the one it installs by default - use the one in the first link/post as a basis).  You can also use Champlist to control your installation settings.
This enables me to change the model number, serial number, bios/efi version etc reported by the system - and you can also do this by manually editing the smbios.plist file
After booting I added relevant information into the settings to simulate a built-in ethernet port, after matching the specific settings for my macmini - but no luck.
I also booted it as a MacBook Air to see if this would negate the need for an inbuilt ethernet port - however no luck either.
Authentication failed in the same way. 
Either the information reported by Apple System Profiler, and changed by Chamelon,  is surface-level and the 'true' information is still being read by the authentication process or there is something amiss with my 'hackintosh' settings.
I have a few more things to try including:
Booting using Chamelon and then deleting network prefs and seeing if this resets the authentication process on the next boot
Reverting the MacMini to stock macmini1,1 firmware. (Has been updated to macmini2,1 using method at: http://forum.netkas.org/index.php/topic,874.0.html)

Similar Messages

  • HT201257 Screen/ Display Problems- maybe hardware related?

    Has anyone experienced a problem with their display- where an open window repeats over and over the entire screen (sometimes appearing like random squares) and the only way to correct the display seems to be by opening finder and dragging it across the screen? This often occurs when using CS5 inDesign.
    Does anyone have a solution/ diagnosis?
    Thanks in advance!

    That sort of problem correlates with a graphics Hardware problem.
    It is possible that if your graphics card is clogged with dust, blowing out the dust and allowing it to stay cool will resolve the problem, but I would not get my hopes up.
    The Apple 5770 works in all Mac Pro models, about US$250. Do not buy a non-Apple version, as it will not show a picture under Mac OS X.
    http://store.apple.com/us/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-for-mac-pro-(mid-2010)?fnode=53
    http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html

  • Can I have separate password for appstore and icloud email account?

    Can I have other password for appstore and icloud email account? Me and my girlfriend have iphones and i would like to share my apps with her, but i dont want to give her possibility to acces my email account....

    Well you can only have a different password if you are going to use a different Apple ID

  • AOL and iCloud email problem - any ideas?

    Hey everyone!
    I have three email accounts — gmail, aol and iCloud (which migrated from mobileme).  Recently only the gmail will work in Apple mail on my iMac.  I have attempted to remove the accounts in system preferences under mail contacts and calendars and add them back but it's failing.  With AOL, it says Connection failed. This also happens if I use outlook for mail instead of Apple Mail.  With iCloud, all services will turn on except Mail/Notes.  It will look like it's on then you browse away from the setup window and go back and it's been turned off. 
    I've been reading about issues with iCloud mail, but am confused now with the AOL issue as well, which I haven't seen listed anywhere.
    So far, I have created a new user and the problem persists.  I also installed a fresh copy of lion over my copy (not an erase and install, just a reinstall leaving my files in tact).  When I attempt this on my MacBook running 10.7.2, I have neither problem.  All my accounts work perfectly.
    I'd apppreciate any suggestions you might have!
    Michael

    I just wanted to update this in hopes someone can recommend a solution.
    I erased my drive today and tested it and it worked. I restored from a time machine backup and it stopped working.  Then I erased again, verified it was working and manually placed my files back on the machine.  After reinstalling all my store, it stopped again. Clearly, there's something installed in the system that is conflicting with the mail setup. I was wondering if anyone has any suggestions. The problem persists on other uses on the machine, so it isn't user specific.
    Michael

  • System problem - MAYBE OSX related...?

    I have no definitive answer or resolution thus far for this
    problem in the forums and wanted to re-summarize it here, one more time, to see if anyone has
    any other suggestions before i toss in the towel on self-repair efforts and invest in Apple Service.
    Problem:
    On a dual MDD G4 1.25, which i normally boot/use OS 9 on)
    there is now a system 'hang time' of anywhere from 15-25 secs. in various circumstances including:
    On boot-up, just after the Finder has loaded, I can move the mouse cursor but the Mac won't respond to clicks for up to 15-20 secs. Then, the "buffered clicks" get executed at once.
    This hang time also occurs within certain applications, and on startup of IE Explorer there is an abnormal delay between the Open command and completion of startup cycle(opening to Home Page).
    At first it appears a system freeze, but then ultimately system interactivity resumes eventually.
    This machine is on a high-end Tripp-Lite power conditioner in a recording studio.
    The problem seemed to begin after a day where i had multiple power fluctuations/outages requiring cold reboot several times.
    I have swapped out both 512 Dimms and tried running with each separately and the problem remained.
    TechTools has been run, OSX Permission Repairs run/re-run..
    and i've done an OS 9-only "restore/reinstall" of that
    System. I also ran a defragmentation off of techtools.
    Memory 'tested' as okay.
    My internal HD is a 160g, one partition.
    Since the problem occurs within OS 9 and i did reinstall that system, i would tend to think that rules out the System.
    I can't detect any similar problem under OSX!
    Things tried that didn't resolve it:
    Emptying Servers Folder in the System Folder. Desktop Rebuild, PRAM/NVRAM resets, VM Off, Extensions OFF restart, (no change), Startup Items Folder/Prefs Folder EMPTIED and restart; no change. All Devices (USB/Firewire & Cable Modem, Keyboard/Mouse) disconnected/Restart; no change.
    MemTest run on Dimms; Reported as OK.
    Is there any point in reinstalling Sys software given all
    this, or any ideas on what else to try?
    Thanks,
    Mike

    Ron, I did, (conflicting opinions about Norton notwithstanding) run a Volume/Directory test from NDD (it is
    a cumbersome process given that Norton must be on a separate computer and the machine in question must be in target-firewire mode to "access" the OS 9 System Folder - since the Norton app will not startup on the MDD machine...
    "Apparently," it was able to process a test and no errors
    were reported after running it, or, Tech Tools, on that System Folder.
    I appreciate the idea. Not sure if there's an easier way to 'get at' the folder off a Norton Utilities disk as long as it resides in the peculiar dual-boot environment which presents a variety of challenges for anyone seeking to run any type of OS 9 diagnostics from a non OSX-based startup disk... not to mention the screwy reinstall/restore configuration of this particular Apple incarnation's install disk "set."
    To put it bluntly, Mac really went out of its way to discourage any OS 9 loyalists with their "last OS 9 machine"
    --but i digress....
    Thanks
    Mike

  • 6800 Problem maybe Motherboard related

    Ok im just going to get straight into it....
    I recently replaced my built by ATi 9800 non pro for a brand new BFG 6800GT.
    So i bring it home about 2 days ago, reformat to make sure all the old drivers are gone, installed win xp, then sp2 (w/ DirectX 9.0c), then my Chipset/AGP drivers and finally my video card (61.77) and soundcard drivers.
    So far so good...
    I run 3dmark and get some very good scores (3dmark03: 10,900 / 3dmark01: 19833)
    So next i install call of duty and thats where the problem begins...
    Terrible and  i mean TERRIBLE performance, my 9800 non pro beats out my GT in alot of situations. The biggest problem is the FPS dropping randomly from about 125 to 30 then getting choppy then going back up to normal (On LAN and online servers).
    The problem only seems to be occuring in OpenGL / Quake3 Engine games.
    So from there i went and downloaded the 65.73 and 65.76 drivers, tested them both (After uninstalling and running driver cleaner) still no luck.
    From there i tried all the drivers between 60.xx - 66.xx and still no change.
    So finally i run live update 3, get all the new updated mobo drivers and flash my BIOS to the latest version and still terrible FPS drops and random choppyness.
    At this point im almost ready to return the 6800GT and buy a X800 Pro and see if that works which i have a chance to tommorow (Friday).
    If you know anyway to fix this or what the problem might be or if i should just buy the X800 please let me know asap.
    My system specs are below in my sig
    Thanks,
    Phourstar
    *EDIT: Forgot to add I've tried playing with AA/AF off and Vsync off and still bad results, i currently have everything set to low detail in my games and 800x600 no AA/AF and vsync off *

    Hi
    there are several things that can cause problems some which can be solved easily and some not so easy. Ive heard many problems with BFG ultras but not so many with the GT's but i suggest your first port of call should be BFG to see if they have a new BIOS for your card as they had to release one for the ultra.
    Other options to try are ... turn OFF fastwrites in the mobo BIOS , raise the agp aperature size to 256Mb , make sure nothing else is on the same power cable plugged into the GT , increase case ventilation or leave side of case off while testing as the 6800's throttle back if they get too hot , or trade in for a standard GT not a pre overclocked one from BFG
    thats all i can think of right now ..
    best of luck

  • Exchange and iCloud Contacts Problem

    I just recently updated my iPhone to iOS5 and I'm having some difficulty with the exchange and the iCloud servers because they are clashing.  When I go to my contacts, most all of them are doubled and when I recieve calls etc it shows up and "Mom & Dad or Mom & Dad."  I was wondering if I go into my settings and click the Exchange contacts off will it fix the problem?  I just got worried when I saw the "are you sure you want to delete the ones on the phone" warning that came up.  Is there a way to merge iCloud and Exchange so that this will not be a problem?

    My experience, while not directly related to iPad and iPhone, is that the problem starts when you have different types of calenders on your device.....'work', 'desktop', etc...
    If the preferances are not set correctly at the time of the first synch and you have both work and desktop checked, both will create the same contact, thus, resulting in duplicates. This also holds true with calendars.
    I do not know how to fix this problem alone, have needed CS to help walk me through it.

  • OS X v10.7, iCal and iCloud - sync problems

    BLUF: After installing OS X v.10.7, iCal will not accept my iCloud password and thus will not sync/update my calander events on the laptop to my other devices or to the cloud.  Sync-ing is fine between other devices and the cloud, so the Cloud isn't the problem.
    Details: I recently allowed Lion to install it's most current update.  At the conclusion of the install, it rebooted and gave me the option to install a new version of Lion or to recover from TimeCapsule/TimeMachine.  I assume the update failed for some reason, and it was unable to reboot as planned, but it did not give me any indication of the problem nor did it provide any error messages.  I allowed it to install a new version of Lion.  Unfortunately, not a good start to an OS update.
    The reinstall seemed to be ok except that it reset/changed some of my settings for mail accounts and now iCal will not log into iCloud.  I have entered the correct iCloud password and it keeps coming  back with the same dialog box saying the password is wrong and to re-enter.  I have verified both the account name and password by logging into iCloud directly which works fine.  New items place on the calendar are never synced to the cloud or to other devices, however, sincing from other devices to the cloud and back is not a problem. 
    Any help or suggestions appreciated.  Thanks.

    Problem has been solved - for those who possibly have the same problem, I will note what I did.  The trouble-shooting guide mentioned disabling/re-enabling iCloud calendars in iCal through the System Preferences.  I noticed when I attempted to do this that iCloud wasn't there anymore.  Apparently the reinstall of Lion (after the failed upgrade from 10.7.2 to 10.7.4) required me to re-reinstall (install?) the 10.7.4 upgrade.  Once this was done, the iCal connected properly to iCloud and is syncing. 
    I have also now started the download on MountainLion - hopefully this is an enhancement instead of a source of new problems.

  • Wi-fi and iCloud backup problem since ios8.1.1 update

    I Have an iPhone 4s and after updating to the latest software, I'm having many challenges connecting to my home wifi network on a consistent basis.  It comes and goes.  Since the software update my phone has not backed up overnight like it used to.  I've reset my network settings on the phone multiple times, but no luck.  I've also rebooted the router as well.  Any advice would be appreciated!  thank you. 

    Hi Jaimec77,
    If you are having an issue with not getting a consistent Wi-Fi connection with your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I am unable to connect to iCloud AppStore and iTunes Store

    I cannot connect to iTunes Store AppStore and iCloud due to 3 previous apple ids on my phone as I bought it second hand. How can I solve this problem?

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-thttp://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes-http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311http://support.apple.com/kb/ht1311
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

  • HT4623 my husbands iphone4 was dropped and it doesnt work now... according to powermac representative, hardware related problem, what should i do? anybody knows where to bring the unit for repair, because powermac didnt accept it.

    my husbands iphone4 was dropped and it doesnt work now... according to powermac representative, hardware related problem, what should i do? anybody knows where to bring the unit for repair, because powermac didnt accept it.

    Who is powermac? Are they and authorized iPhone sales site?

  • Yet another temporary freezing problem, energy saving related, maybe

    I've followed uncountable suggestions about this issue, but none seem to be quite the same situation, and none of the suggestions I tried made any difference so far.
    History: MBP 17" June/2009, 8GB RAM, 500GB Seagate with sudden movement protection, started life as 10.5.7, done at least three fresh reinstalls of SL. The problem was present on the second SL install (the one I really used in production for about a year), but I solved it somehow by following uncountable Google suggestions at the time. Didn't take not of the magic one, because the problem wasn't so predictable at the time, or I didn't know enough about it, and also because I only noticed the problem was gone after a couple of weeks of normal use. Unfortunately, some time ago my filesystem went nuts on a kernel panic and, though I was able to move things back in place from lost+found, a few things wouldn't work as they should, so I went for another fresh reinstall. After I started to use the new system the problem showed up again, but I haven't being able to find a fix for it again. Current system (10.6.4) and patches regularly updated, though I tend to delay a reboot to avoid putting together all my usual windows/applications in the correct desktop/spaces. Maybe the only continuously running extension I have is Growl, since I tend to more heavily use the Unix part of the Mac through MacPorts (latex, tcpdump, nmap, bash scripts, emacs and so on). Recently I installed M$ Office, but normally I prefer OpenOffice (does M$ Office install some sort of extension?)
    Frequency: I'm almost sure it is triggered by something related to energy saving regarding turning off the screen, but it doesn't happen every time. When I'm giving a class, the machine runs on battery, the settings for screen off are shorter and if I take too long to generate some input (key press or touchpad action), the problem tends to happen. Interestingly, it's particularly more frequent when I'm giving classes:-):-), but it is happening even on my desk with power on. I'm inclined to think there's a "window of opportunity" for the bug to happen, maybe between screen dim and screen off (a few minutes?). My settings are currently at 15 minutes for the screen to go off, for both power adaptor and battery operation, but that's an attempt to lower the chances of this happening during class, which is terrible. They used to be at only a few minutes of inactivity.
    Symptoms: if I try to do anything with the machine past some period of inactivity, maybe during that window I mentioned above, there's a high chance of the bug being triggered. The system responds quickly to clicking a window, but applications don't seem to receive the focus of attention; I notice that the window frame of an application doesn't get darker when I try to select it. On a Terminal, the prompt remains as a rectangular frame instead of a filled block (I use white characters on dark background), and no matter how much I try, I cannot give the focus of attention to the visible shell on Terminal, so I can't issue any shell command to try and find out things. Changing workspaces may happen, but at a very slow speed, maybe many seconds after issueing the command. Eventually the system recovers itself, usually after several minutes, and then all user interface events that I tried during the freeze were remembered and are played sequently as fast as the machine can handle, sometimes doing unwanted things in the process due to objects receiving the wrong action (some sort of desynchronization). The outstanding event that preceeds recovering is the screen being progressively blackened and then lit again, but not instantly as in moving the pointer to a hot corner. The screen transition happens during half to a full second, after which all queued events are played at the fastest possible speed. After that the system is completely normal. In the beginning I have hard-rebooted the machine, because I didn't know it would eventually recover itself. During class I also don't have the patience to wait for long (and neither do students:-)).
    Solutions already tried:
    - disabling sms through pmset. I know it has to be disabled with this particular drive, otherwise conflicts with the drive's own mechanism. It is currently off, and had been on for a while till I refound the suggestion through google.
    - re-indexing Spotlight's DB. No change.
    - fixing file permissions (I don't see any possible relation, but anyway...)
    Don't recall what else is missing on this list, because I couldn't find a concrete suggestion for this scenario, so I believe that's about it.
    It looks to be more frequent now, to the point that I decided to stop work just to write this long msg, in the hope that someone else may have seen such behaviour and have something new for me to try.
    Thanks in advance.

    The problem is that the initial backup is incredibly slow and hasn't worked yet. I right click on the dock icon and start the backup process which after working out what needs to be copied progress's in very slow erratic bursts.
    It's hard to offer a definite solution. But there are some simple things you could try to improve the backup speed such as excluding TM backup disk from spotlight indexing (privacy tab in spotlight prefs), and excluding unecessary files and folder from the backup (e.g. applications) in TM prefs.

  • HT5625 apple id problems with apple id and icloud log on

    hi all you dudes out there?
    i am having problems with my log on to itunes and icloud?
    really thye problem began some time ago when i got an upgrade from iphone 3s to iphone 4s, i kept my old iphone as a second phone then gave the old one to my mrs?
    the problem is when i send a message to anyone the wife gets it on hers too? and vice versa? i have now desected/romoved the old iphone 3s from my apple account but its still happening? on removing the old iphone i got an icloud log on with new passwords and i changed the email on record for itunes and apple log on as my emial address had changed due to a new broardband supplier so the old one became usless to me so i changed it all?
    now the aqpple id still comes up as the log on id for itunes and icloud and i cant seem to rectify this even though i have changed all the details around to the new log on id`s ???and i still get her messages and her mine??? its driving me potty? i mean when you change the id surly apple should wipe the old log on? apparently not so if i try to log on with the old details it wont let me on? now i cant buy music or anything else?
    has anyone got any answers so i can retify the log on and stop messages going to my phone from the wifes and mine to hers? like if i text her i get the message on both my own and to hers ???
    i would say niether of us could cheat cos we get each others messages
    any help would be greatly appreciated believe me! thankyou all in advance! herrline or Graham!

    hi guys and gals an update to the above question?
    the settings for icloud still has my old email address which i deleted from itune and apple? so maybe this is why i cant get on to itunes etc But? i cant change or delete from my iphone icloud account so i can reset it with out logging in with the old details which are no longer on itunes or apple system so im compleatetly stuck?
    aaaarrhhhhh? herrline or Graham.
    on the godd side the problem with the texting seems to have rectified after i followed the info from the right hand side other questions like "my wifes iphone thinks its the same as mine"? its now not messageing mine when i send messages so i hope when she sends messages i wont get her either?

  • I have Lion and iCloud.  There are two very annoying problems.  mFirst, in the middle of writing or research the window gets yanked to the right.  Sometimes it can be retrieved and sometimes it can't.  sec on, in the course of research on Safari, or work

    I have recently upgraded to Lion and iCloud.  There are two very annoying quirks that i don't know how to fix:
    1-When working with word, documents or emails in the middle of a sequence the picture or window suddenly is yanked off the screen to the right.  More often than not it can't be retrieved.  This happens often
    2-In the same mode as in #1 above the print size will suddenly increase maybe by a factor of 3x or 4x.  it happens spontaneously.
    3-There are many other problems with the upgrade:
         -With sequence emails the secondary emails are not printed.  When one tries to open those emails it often fails.
         -The new address book format is crap.  it is very difficult to go from single listings to group listings and back.
    It's obviousto me the Apple software designers are not users.
    So how can i fix #1 & 2 above.

    > When working with word, documents or emails in the middle of a sequence
    > the picture or window suddenly is yanked off the screen to the right.
    Microsoft Word?  What version and service pack?
    Microsoft Office 2011 SP2 includes Word version 14.2.2.  Some Office 2011 updates addressed problems with Lion.

Maybe you are looking for

  • Simple button navigation script

    This question is so simple-I can't really find the answer anywhere, but as a complete NooB I have no idea how to make this work. I have a nested movie 1 layer down from main stage that has several navigation buttons that move to different main stage

  • The application version J2EE_1_4_OR_LESS is not supported

    Hi All, What does the below shown exception mean? Please help. I found the below shown exception in the Netweaver 7.1 logs: com.sap.tc.jtools.jlinee.orpersistence.model.ORPersistenceModelBuilder##com.sap.tc.jtools.jlinee.orpersistence.model.ORPersist

  • Where does iWeb store the domain file?

    where does iweb store the plist?

  • Iphoto 11 Advanced Organization

    Per the manual,  "If you already have an extensive photo file structure saved on your computer, the new import option lets you choose to have the Iphoto point to your original photo files instead of duplicating them in iphoto" Is this still putting t

  • How to update Oracle Client

    Hey, I downloaded and installed the Oracle Client Version 10.2.0.1 on Windows x86 Now I would like to update this oracle client, but how ? I installed the software to C:\oracle\client Now I downloaded Patchset 3 (10.2.0.4) But I can´t install this pa