Archive Error file in PI
Hi frnds,
I have a requirement which says we need to archive a file when it is in error in PI. How can we acheive this as we need to move error file into a specific folder.
Any Suggestions.
Thanks,
Prabhas
Hi Prabhas,
You need to use the option of "Archive faulty Source Files" in the processing tab of your Sender Communication channel.
Open your sender comm. channel --> goto the Processing tab -
> In processing parameters you will find an option
"Archive faulty Source Files " , check the corresponding checkbox -
> then you will get another parameter " Directory for Archiving Files with Errors" ---> Here you need to specify the path of the folder where you want to move the error file to archieve it.
Hope this will help you
Regards,
Rohit
Similar Messages
-
File Adapter - Archive Source Files with Errors.
Hi All,
Could you kindly give the steps as to how to configure sender File Adapter to archive source file which result in error ?.
Cheers,
KushiHi Kushi,
To configure Sender File Adapter what you can do is:
1. Create one Communication and select the adapter as File.
2. Select the radio button Sender.
3. Enter the source directory e.g. /temp
4.Enter File name e.g. xi_test.xml
5. Under Processing parameters Chose the processing mode as "Archive" from
drop down box.
6. Enter the path where you wnant to archive your file.
7. Do not forget to enter the poll intervells. e.g. 60 & Quailty of service "Exactly Once".
8. Enter file type "Binary" if your source file is XML.
9. Check if Adapter status as "Active".
Note: Archiving the file is regardless of erorr in file.
It will archive all the source file.
Regards,
Sarvesh
****Reward Points, if found helpfull. -
How to Archive Source Files with error in XI ?
Hi,
How to archive source files where a permanent error occurred duing processing? and how to set it?
Thank you in advance.
YinglakHi,
What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
Archive Directory is used to store the sender files what ever data ur sending ........not for only error records.
Regards,
Phani
Reward points if Helpfull -
Archive Source Files with Errors, Option Does not work
Any one tried "Archive Source Files with Errors" on the
sender adapter. It shows no effect.
1.We are on SP19.
2.Adapter type : FTP adapter.
Steps for the Reconstruction
1. Configure a sender FTP adapter.
2. choose the option "Archive Faulty source files"
3. Specify a directory for "Directory for archiving Files with Erroors"
4. Send a file which can cause File Content conversion errors.
Regards,
RajHi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy -
Archive Source Files with Errors
Hi All,
I need to archive my sending file in repective directory, if it has errors..
It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
What is permanent error?
For example if my input file name is abc.txt which containg 3 fields id,name,address.
i have configured sending file adapter with FCC .
now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
but this is a error.Asper FCC i have given only 3 fields..
so this error file has to archive in so and so folder.
If i check <b>Archive Source Files with Errors</b> parameter in sending file adapter.
and specified the specified directory.
but its not working for me. file is not picking but its not coming in the archive folder.
In library it is mentioned to see message transfer bean link.
there i found <b>Transform.PermanentErrors: True/False</b>.
If we have not used message transfer bean then, in that case will this parameter <b>archive source files with errors</b> will work for FCC?
Please suggest me .
I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
Thanks in Advance..
Regards,
ReehanReehan,
I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
Good luck! -
Use of "Archive Source Files with Errors" for BIC module error
Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek -
"Archive Source Files with Errors" feature - how to?
File sender adapter has a feature to Archive Source Files with Errors.
I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
How can I use the Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
Regards,
AmolHi,
if you see whats mentioned on the help link
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
it says:
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
does this not mean it could be used with errors raised in adapter modules? ideally it should be. -
Archiving Processedor Errored Files on FTP folder-Receiver File Adapter
Hello,
A quick question, we have a scenario where we are picking a file from FTP folder and we need to archive it on the
1) Processed file on the same FTP server different folder
2) errored file on different FTP folder.
How could we achieve this using the FILE Adapter?
As what i could see the file adapter does not gives you the option to select the FTP site for this...
Help is appreciated.
RegardsTo archive source files where a permanent error occurred during processing, select Archive Faulty Source Files.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
More information: Adding MessageTransformBean in the Module Processor
u25CB Specify Error Archive Directory.
u25CB To add a time stamp to the archived file, select Add Time Stamp.
ref: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/655453b48a4ddfe10000000a1553f7/content.htm -
Error after Restoring Datafiles in Archivelog but missing archive log files
Hi all,
I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files. Yesterday night i have restored my DB .
I m happy to have my datafile contents till yesterday morning.
But after restoring when i try to open th DB, i m facing the following errors:
SQL> Startup open;
Oracle instance started but in mounted stagell
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL> recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
ORA - 01112: media recovery not started
SQL> recover;
ORA-00283: recovery session cancelled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
Alert Log File:
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 633339904
shared_pool_size = 301989888
shared_pool_reserved_size= 30183260
filesystemio_options = setall
control_files = E:\ORACLE\IE6\ORIGLOGA\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\ORIGLOGB\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\SAPDATA1\CNTRL\CNTRLIE6.DBF
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 301989888
compatible = 10.2.0
log_archive_dest = E:\oracle\IE6\oraarch\IE6arch
log_buffer = 2854912
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes = 1
background_dump_dest = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
user_dump_dest = E:\ORACLE\IE6\SAPTRACE\USERTRACE
core_dump_dest = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = IE6
open_cursors = 800
optimpeek_user_binds = FALSE
pga_aggregate_target = 402443468
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2, OS id=804
PSP0 started with pid=3, OS id=9580
MMAN started with pid=4, OS id=5840
DBW0 started with pid=5, OS id=8136
LGWR started with pid=6, OS id=8712
CKPT started with pid=7, OS id=1620
SMON started with pid=8, OS id=7084
RECO started with pid=9, OS id=9576
CJQ0 started with pid=10, OS id=9156
MMON started with pid=11, OS id=6000
MMNL started with pid=12, OS id=2856
Sat Apr 18 04:01:29 2009
ALTER DATABASE MOUNT
Sat Apr 18 04:01:33 2009
Setting recovery target incarnation to 1
Sat Apr 18 04:01:33 2009
Successful mount of redo thread 1, with mount id 1124466585
Sat Apr 18 04:01:33 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Sat Apr 18 04:01:34 2009
ALTER DATABASE OPEN
ORA-1589 signalled during: ALTER DATABASE OPEN...
Sat Apr 18 04:02:13 2009
alter database open resetlogs
Sat Apr 18 04:02:13 2009
ORA-1245 signalled during: alter database open resetlogs...
Sat Apr 18 04:11:05 2009
ALTER DATABASE RECOVER DATABASE UNTIL CANCEL
Sat Apr 18 04:11:05 2009
Media Recovery Start
Sat Apr 18 04:11:06 2009
Media Recovery failed with error 1610
ORA-283 signalled during: ALTER DATABASE RECOVER DATABASE UNTIL CANCEL...
Sat Apr 18 04:11:28 2009
ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE
Sat Apr 18 04:11:28 2009
Media Recovery Start
parallel recovery started with 3 processes
ORA-279 signalled during: ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE...
Sat Apr 18 04:17:23 2009
ALTER DATABASE RECOVER database using backup controlfile until cancel
Sat Apr 18 04:17:23 2009
Media Recovery Start
ORA-275 signalled during: ALTER DATABASE RECOVER database using backup controlfile until cancel ...
Any suggestions pls..............
Thanks & Regards,
SubbuHello Subbu,
> I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files.
You mean you have taken an online backup and lost all your archive log files after that online backup?
SQL> alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL> recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
To perform a recovery with an online backup you will need all archive log files until the end of the online backup. If you have lost them you are not able to recover (or open) your database in a consistent state.
So the only suggestion we can do is:
You need the archive log files that were created during the online backup to perform an incomplete recovery ... if they are gone you can not restore your database.
Regards
Stefan -
Hi,
My scenario has the input X12 files mapped to orders idocs. We are using Seeburger conversion modules in the File Adapter to transform the X12 files. When there is any error in the conversion of the X12 file, it throws an exception. Is there any way to archive this file into an 'Errors' folder, so that the adapter can continue processing the rest of the files? Currently, the processing is stuck till the faulty file is manually removed from the folder. Any help in this regard, is greatly appreciated.
Thanks,
GeethaHi Geetha,
Check the sender file adapter(seeburger)..processing mode:
select archieve fualty source file, mention the path where it has to put the files.
You can later on check the folder and process the error files.
Alternatively,
Adapter module can be created if any attachment has to be retained.
Regards,
Sushama -
Archive rar - error "files has removed"
Open archive rar - There're files in folder. I start unpack their. Writing error "files has removed". What are F**K? How do winrar's fix & open my documents?
Solution: anti-virus program is closed, try install winrar390 or reinstall it, check your winrar's settigs. It may be problem with archive, try used to unpack docemets with help:RAR Fix Toolbox.
It designed for recovery error's files.
http://www.rar.fixtoolbox.com/ -
hi
i have take offline back. now i am taking archive log file backup
there is giving error
BR0002I BRARCHIVE 6.40 (34)
BR0006I Start of offline redo log processing: aechsfgv.sve 2010-01-08 15.26.53
BR0477I Oracle pfile D:\ORACLE\HOD\920\database\initHOD.ora created from spfile D:\ORACLE\HOD\920\database\spfi
leHOD.ora
BR0013W No offline redo log files found for processing
BR0007I End of offline redo log processing: aechsfgv.sve 2010-01-08 15.26.56
BR0280I BRARCHIVE time stamp: 2010-01-08 15.26.57
BR0004I BRARCHIVE completed successfully with warnings
BR0292I Execution of BRARCHIVE finished with return code 1
BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action
BR0280I BRTOOLS time stamp: 2010-01-08 15.26.57
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:Hello,
Have a look in oraarch if new archivelogs are correctly generated in the directory and if name look like other files.
C:\>SQLPLUS / AS SYSDBA
SQL>alter system switch logfile;
Regards -
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
How to recover the database when some of the archive log file get deleted.
I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AMHi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss. -
Prevent Sender File Adapter from retrying an error file
Hi,
I have a situation where there a number of source files[100+] to be picked from a source directory. The files are then processed by an adapter module before they are sent to the IE. Now, in the lot to be picked up there are files which do not conform to the input file structure validations in the module and consequently these would not[and should not] be picked. These files could occur anywhere in the input set and presently the adapter is re-trying the processing of these error files, with the result that the subsequent files are not processed.
Is there a method to ensure that the entire input file set is processed regardless of the adapter encountering error files in between?
Thanks,
AnandYes,
In your sender communcation channel, you must activate "Archive faulty source files" flag and indicate a directory for archiving files with errors.
Regards,
Carme
Maybe you are looking for
-
SQL Query in Visual Composer 7.1.1 SP2
Hi all, I want to use an SQL Query in Visual Composer 7.1.1 but I only can search for Stored Procedures. There is documentation available but not for VC 7.1.1. I also can not use the Query Wizard for this as the System does not show up in the list.
-
I can't get iTunes to work properly on Windows 8
I can't get iTunes to work properly on Windows 8. I tried everything and iTunes is NOT compatible with Windows 8. There is either an iTunes issue or a Microsoft issue.
-
good morning, i've a problem when i try to import an XML file to SQL. In my particular case i've an xml file structured like this: <?xml version="1.0" encoding="UTF-8"?> <Flussi xmlns="http://indennitario.acquirenteunico.it/Semplificato/1.0" xmlns:x
-
Is it possible to import a photoshop timeline into Flash CC?
I'll explain what it is I am making, I have created a globe in photoshop which rotates 360 degrees, I'm looking to import this into flash to make the globe interactive with markers. I need to earth to be continuously spinning though when a location i
-
Methods of passing parameters from servlets to servlets
Hi all, Im new to Java servlets. After doing some read-up, I understand that parameters can be passed using request.getSession().setAttribute(). The other method is using hidden element as shown below: out.println("<form method=POST>"); out.println("