Archive selection can not be maintained in SARA

Hi all,
  i have done everything for deleting batches for pp consultant. but Archive selection can not be maintained as i am unable to see anything inside it.
Thanks in advance.
Vaibhav Gore

Hi
i am using archive object MM_SPSTOCK, then the program MMREO220N
in TEST MODE also but the result is same...tel me the detailed procedure....

Similar Messages

  • PAYROLL ARCHIVE PROCESS CAN NOT SEEN ON THE REQUEST SET FOR SUBMIT

    Dear all
    kindly please i need your help.
    i was on the payroll process running.
    i have run payroll run--->PrePayment--->Payroll Archiver not found.
    Kindly please suggest any......what should i done.

    It's not possible with this setup. You have connected the E3000 LAN-LAN. With this setup you cannot set a gateway address on the E3000. Thus all it knows about is the connected LAN. Nothing else. You cannot access the E3000 from anywhere but your LAN subnet 192.168.0.*.

  • Archive log can not ship to GAP logfiles to standby DB automatically

    we have a non-real time standby database, which will receive the archive file from the primary database server most of the time, and will apply the logfiles only at one point of time daily.
    Some times, we need to shutdown the Standby DB server for a while ( 3-4 hours).
    The missed logfiles will catch up during the standby down time later.
    But since last week we had an storage incident, the primary DB server stops to catch up the missed logfiles, and saw this message at the archvie trace file:
    ABC: tkrsf_al_read: No mirror copies to re-read data
    Current, we found the archive log gaps on the standby server, and have to manually copy those logfiles over and register them.
    Saw some tips on the internet to change the parameter "log_archive_max_processes", but no help for us at all.
    Here is the parameter on the Primary DB server:
    log_archive_dest_2 = SERVICE=Standby_server reopen=300

    which will receive the archive file from the primary database server most of the timeMost times from primary. Then remaining times? so you Copy manually and register?
    Then it's dataguard not an manual standby.
    Error 1034 received logging on to the standby
    Errors in file /******/***arc210536.trc:
    ORA-01034: ORACLE not available
    FAL[server, ARC2]: FAL archive failed, see trace file.these errors in primary when , stanby is down and when primary tries to connect to standby, so tese errors not considerable to investigate ,
    When you don't want to apply archives on standby no need to shutdown. Just put this value log_archive_dest_state_2='defer'
    Once you enable check what are the errors in primary alert log file.
    How is your network band width speed? Is it capable to hold that much archive data?
    May be it will take some time when you pause & start.
    Also use LGWR in log_archive_dest_2 for real time apply after creatin standby redo logs.
    So post the alert log information once you enable standby database.

  • Report painter- Characteristic can not be maintained with key figures

    We have added new characteristic ZZFIELD1 in CCSS report sructure for reporting and selected it in gen. selection list. While running report painter report, it gives an error that ZZFIELD1 cannot be combined with key figures.
    Any help to figure out what step is missing will be highly appreciated.
    This is a PS report painter report using PS database profile in the selection of parameters for the report
    Thanks

    The fields we have added is ZZFIELD1 ZZFIELD2 in the PRPS table. And the key figures used in the report is;
    AWKG - variance/accrual costs (basic key figure) with characteristic version 0, value type 32, fiscal year and period
    SWKG - cost (basic key figure) with characteristic version 0, value type 4, fiscal year and period.
    SMEG - quantity (basic key figure) with characteristic version 0, value type 4, fiscal year and period.

  • Select query not working

    Hello Experts,
    i am using select query like
    SELECT SHKZG SUM( DMBTR ) AS DMBTR
      FROM BSIK INTO CORRESPONDING FIELDS OF TABLE ITAB_BSIK
      WHERE BUKRS = W_BUKRS
      AND LIFNR = WA_BSEG-LIFNR
      AND ( BLDAT BETWEEN W_DATe_low AND W_DATe_high )
      GROUP BY SHKZG.
    I checked with table by giving the values same as here.
    In table m getting data , but dont know y after executing this query m not getting results.
    value of sy-subrc equals to 4.
    Can any body tel me what might be the problem??
    Thanks & Regards,
    Manisha
    Edited by: Rob Burbank on Aug 3, 2010 11:12 AM

    Hello ,
    SUM and AVG commands runs on your database system and calculations with type floating numbers.
    It can cause a low performance and sometimes wrong results.
    In your example ,
    if you are using Packed numbers in your internal table for DMBTR ( like bseg-dmbtr )
    and sum of the related records does not fit into this fields than select can not run.
    I can recommend u this code :
    DATA :
    begin of w_bsik,
      shkzg LIKE bsik-shkzg,
      dmbtr LIKE bsik-dmbtr,
    END OF w_bsik,
    t_bsik LIKE STANDARD TABLE OF w_bsik.
    SELECT shkzg dmbtr FROM bsik INTO w_bsik
    WHERE ...
       COLLECT w_bsik INTO t_bsik.  <--- Collect command does sum operation based on SHKZG
    ENDSELECT.
    I hope it helps.

  • Can not see my history

    When I hit on history it will not show all history. I use to be able to hit show history for today or yesterday but nothing there to even select can not click on recently closed tabs or windows

    * Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
    * You enter Private Browsing mode if you select: [http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Firefox > Preferences > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Automatically start Firefox in a private browsing session"

  • I can not write an action in a layer,

    shows a message: current selection can not have actions applied to it
    I am tryng to make a web gallery and need to add a stop action to the movie clip.
    please help me
    thank you

    it is wear, becuase it shows only the Action
    at the first part of th gallery it allows me to write but when I doble click in the image wich i converted o a movie and I add a motion tween and alpha
    it does not allows to write the stop actionin the last frame.
    thankyou

  • Not able to view the uploaded PAR file in the portal archive selection.

    Dear All,
    I have modified com.sap.portal.runtime.logon.par and have renamed it to some other name.
    Now I have uploaded the par file.
    The problem is that when choose new from PAR option (to create iview from a par file),I am not able to see the par file in the Portal Archive selection.
    I also want to know that if I am able to call the par file in the iview, can I use this iview to have a portal login.
    Our requirement is that we want to give login page for the portal in the portal home page.The portal home page will be for the anonymous users.
    Kindly try to guide me

    Hi Nitin,
    Check ur Portalapp.xml file. If u have the following code in that just <b>remove</b> them
    <property name="com.sap.portal.pcm.Category" value="platform">
    <property name="inheritance" value="final"/>
    Deploy it again.now u can see that par in ur portal.Refer this thread also
    PAR File not seen
    Regards,
    Tamil K

  • New PAR file not appearing in the Portal Archive Selection list

    Hello Knowledgeable Portal Ones,
    I am on EP6.0 SP13.
    A developer on the team created a new PAR.  It was uploaded, and it is now showing in my portalapps directory.  A super-admin for the portal can successfully create an iView using it (New from PAR), but developers (who have lesser security access) can not.  When developers attempt to do so, no portal archives appear in the portal archive selection list.  In fact, developers would not be able to create a new iView from any PAR.
    I see that the portalapp.xml has placed the PAR in "high-safety".  I suppose this may be causing the problem. 
    How do I address this problem?
    Thank you for your feedback.
    Kevin

    Hi Kevin,
    there are two known possibilities for this behaviour:
    1.) Within the portalapp.xml, the property com.sap.portal.pcm.Category has been set to "platform". This should only occur if someone imported an existing PAR to modify it. Also see Browse deployment iview
    2.) Someone has changed the permissions for application access (under System Administration - Permissions - Portal Permissions - Applications - <YourApplication> --- There the one who should create an iView from a component must have Read permission for the corresponding application, also see http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604e505fd11d7b84200047582c9f7/frameset.htm - Administrator Permissions - For portal components
    Hope it helps
    Detlev

  • In system preferences, I have set my screen saver folder.  My selection is not maintained.  It constantly reverts to some default.

    In system preferences, I have set my screen saver folder.  My selection is not maintained.  It constantly reverts to some default.

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Can not archive FI document

    Hi All,
    I found that during the archiving activity certain documents can not be archived. I tried several time but still these documents can not be archived.
    I don't understand why, the error mention about open item, what is that?
    I thought it was about the document retention period, but I don't know how to find the setting in SARA nor SARI.
    Can anyone help me on this...please....
    regards,

    Hi Jin,
    The open item meanings like "outstanding" in accounting terms. So open item of account payable refer (not always) to outstanding payable.
    In SAP, all data related to open item, can not be archived. This is because the system assumes that the open item is not processed completely processed.
    The retention period of decument is defined in each module. For FI document, it's somewhere in document setting.
    If for example, your retention period is 720 days, and you want to archive a document which is already 1200 days but remains an open item, then you still can not archive it.
    Hope it helps.
    regards,

  • Can not select from data dictionary view from a procedure

    Hi,
    I wonder, which privilege is missing here:
    my schema has this roles and privs:
    GRANT CONNECT, RESOURCE TO cb ;
    GRANT CREATE SESSION TO cb ;
    GRANT SELECT_CATALOG_ROLE TO cb ;
    GRANT CREATE SYNONYM TO CB;
    GRANT CREATE VIEW TO CB;
    I create a procedure:
    create or replace procedure dd_test as
    begin
         dbms_output.enable(2000000);
         for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
                   dbms_output.put_line(r.table_name);
         end loop;
    end;
    sho err
    4/38 PL/SQL: ORA-00942: table or view does not exist
    When I run the core statement form sql prompt, it works !
    so what privilege is missing here ???
    thanks for any hint, Lao De

    Hi,
    thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
    I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
    How ever, I will update here, when I found the missing privilege.
    regards LaoDe

  • Using tab groups but Firefox 28.0 crashes and even can not save all tabs in archive recently

    Hi. I installed tab groups addon on my firefox 28.0 (firefox portable version) and each group has its tabs. of course. Problem is that Firefox crashes when i work on a group with the tabs and even can not save all tabs in archive as MAFF recently too. When i try to save all tabs in archive as... i choose the name and hit save and wait but after some time this crashes too. Last time i saved all my tabs and groups as MAFF or other file was end of april and since then i can not save them anymore because of the crashing.
    I read on the help site to delete Firefox then reinstall ect. to fix problems but I DO NOT want to erase my groups with their tabs as i chose this solution working with group tabs as it would be to hard on my cpu when i use for each group a different browser for example.
    Please help me fix this problem with the crashes but without loosing my groups and its tabs as they are all important and do not wish to erase them as i use them all.
    Thanks and hope for a soon reply :)

    Can you give me your crash reports?
    #Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
    #Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.

  • Can not select TV speakers when connected via HDMI

    I have a MBP fully updated connected to a Sony TV vis HDMI/miniport.  Up until today this configuration was working fine.  Suddenly, I can no longer select the HDMI speakers in my audio preferences.  They are recognized and appear on the list but when I select them it has no effect.  Before today, when the TV was connected the HDMI output would be automatically selected and I could not access the volume control from the menu bar, which is the way I prefer it. 
    I have restarted with no success in changing this behaviour.  If I open/close the lid, the sound goes to the proper settings for about 2s but then the HDMI speakers are de-selected and the built-in speakers are highlighted.  I can manually select the TV speakers but the setting has no effect.
    However, I *am* getting audio output through the TV but can not control volume from the mac or any app.  I slide the volume slider on the menu bar and the audio output does not change.  The sound is also playing from the laptop speakers which is highly annoying.

    and now there is no audio through the TV at all.  TV works fine with other inputs such as PS3.  Any help?

  • Can not select 'Show HD' in Finder Preferences

    Just performed Data Migration on a new iMac Intel late 2011 from a 2 year old iMac Intel.  For some reason, the Macintosh HD does not display on the desktop.  If I go to Finder Preferences I can not select Hard Disks.  The box is not selected, but If I try to click it, it will not stick.  How do I fix that.  Not much on the internet concering this peculiarity.

    OK, try a couple of things. First is to do some resets, the first I'd recommend doing is restarting the computer in  Safe Mode, this will clear some caches. It's possible one is corrupt. Next is to reset the SMC and PRAM, each of these should be done 2x to ensure they work. Finally if that doesn't do it open Disk Utility (Applications - Utilities - Disk Utility) and Repair Disk Permissions 2x.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

Maybe you are looking for