Archived log to standby server stopped
Hi,
I configured dataguard standby server few weeks ago,
I set log_archive_dest_2='SERVICE=JHRD0107_OFS1 OPTIONAL'
and log_archive_dest_state=ENABLE in primary server,
and very go fine until yesterday, I shutdown my standby server and set the log_archive_dest_state=DEFER,
when I tried to startup again the standby server, and set log_archive_dest_state=ENABLE again,
the archive stop sending the archived log to log_archive_dest_2.
No error was found in alert log of primary and standby server.
It seem that the primary server don't know there is another archive destination..
The database version is 10g 10.2.0.4
Anyone what could be the cause of this?
Thanks
Hi, Below is the parameter related to archive in my primary server
SQL> alter system set log_archive_dest_state_2=enable;
System altered.
SQL> show parameter archive
NAME TYPE VALUE
archive_lag_target integer 0
log_archive_config string
log_archive_dest string
log_archive_dest_1 string LOCATION=I:\OFSDB\OFS1\archive
MANDATORY REOPEN=300
log_archive_dest_10 string LOCATION=USE_DB_RECOVERY_FILE_
DEST OPTIONAL REOPEN=300
log_archive_dest_2 string SERVICE=JHRD0107_OFS1 OPTIONAL
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
NAME TYPE VALUE
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string enable
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
NAME TYPE VALUE
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string ARC%S_%R.%T
log_archive_local_first boolean TRUE
log_archive_max_processes integer 2
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
remote_archive_enable string true
NAME TYPE VALUE
standby_archive_dest string %ORACLE_HOME%\RDBMS
Thanks for your response.
Vincent
Similar Messages
-
Procedure to delete archive log from standby server
Hi
We are using oracle10g(10.2.0.3) and we configured dataguard .
I want to know procedure to delete applied archive log from standby server?
Thanks
With Regards
umair[Delete Applied Archivelogs on Standby Database |http://emrebaransel.blogspot.com/2009/03/delete-applied-archivelogs-on-standby.html]
http://tinyurl.com/p2krga
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Change the location of Archive Logs on standby Server
Can somebody tell me the process how to change the archive logs location for the standby by server. e.g. Its going now to location C:\stby\archives and I want to send it to E:\stby\archives
ThxHi,
Change the STANDBY SPFILE/PFILE Value of <b>standby_archive_dest=E:\stby\archives</b>
see this
http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/init_params.htm#84366
HTH
Regards! -
How to delete archive log on standby site
hi
i configured dataguard on 10g. could anyone suggest how to delete archived log on standby site..Hi,
There is no automatic feature out-of-the-box but you have the following views:
1) Shows archive logs transfered:
select sequence#, first_time, next_time from v$archived_log order by sequence#;
2) Shows archive logs applied:
select sequence#, archived, applied from v$archived_log order by sequence#;
If you see your archivelogs applied you can safely remove archive log files from your disk. It is your decision if you keep or delete them completely. -
Logical standby server stopped applying changes
Hi
I set up a logical standby database with database guard and it worked fine for some time. But recently I had to use it again and discovered that applying changes from primary database to secondary database just stopped working. I see in V$ARCHIVED_LOG one entry per day. If I restart the logical standby then the changes from primary server are also applied. But if I just make a change on primary server and even call 'alter system switch logfile' then I see an entry in V$ARCHIVED_LOG on primary server but not on standby server (BTW in general there are much more entries in this view on the primary server). I checked pairs of log files indicated by the parameter *.log_file_name_convert in standby server's spfile: their last changed date is always the same.
I will paste spfile of my standby server (dh5). Primary server name is dh2.
dh2.__db_cache_size=79691776
dh5.__db_cache_size=96468992
dh2.__java_pool_size=4194304
dh5.__java_pool_size=4194304
dh2.__large_pool_size=4194304
dh5.__large_pool_size=4194304
dh2.__shared_pool_size=71303168
dh5.__shared_pool_size=54525952
dh2.__streams_pool_size=0
dh5.__streams_pool_size=0
*.audit_file_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/admin/dh5/adump'
*.background_dump_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/admin/dh5/bdump'
*.compatible='10.2.0.1.0'
*.control_files='/var/lib/oracle/oracle/product/10.2.0/db_1/oradata/dh5/control01.ctl'
*.core_dump_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/admin/dh5/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='dh2','dh5'
*.db_name='dh7'
*.db_recovery_file_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.db_unique_name='dh5'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=dh2XDB)'
*.fal_client='dh5'
*.fal_server='dh2'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(dh2,dh5)'
*.log_archive_dest_1='LOCATION=/var/lib/oracle/oracle/product/10.2.0/db_1/oradata/dh5_local
VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=dh5'
*.log_archive_dest_2='SERVICE=dh2 LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=dh2'
*.log_archive_dest_3='LOCATION=/var/lib/oracle/oracle/product/10.2.0/db_1/oradata/dh5
VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLES)
DB_UNIQUE_NAME=dh5'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_dest_state_3='ENABLE'
*.log_archive_format='%t_%s_%r.arc'
*.log_archive_max_processes=30
*.log_file_name_convert='oradata/dh2/redo01.log','flash_recovery_area/DH5/onlinelog/o1_mf_4_5x0o5grc_.log','oradata/dh2/r
edo02.log','flash_recovery_area/DH5/onlinelog/o1_mf_5_5x0o61mw_.log','oradata/dh2/redo03.log','flash_recovery_area/DH5/on
linelog/o1_mf_6_5x0o63gj_.log'
*.nls_language='AMERICAN'
*.open_cursors=300
*.pga_aggregate_target=311427072
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.undo_management='AUTO'
*.undo_retention=3600
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/var/lib/oracle/oracle/product/10.2.0/db_1/admin/dh5/udump'
Thanks in advance for any help.
JMHi,
Nice to hear you issue got resolved.
It is good practice to keep monitoring the progress of SQL apply on the logical standby on a regular basis.
You can mark my response as helpful if it has helped you.
Regards
Anudeep -
Manually apply archived log to standby database.
Hi all,
I am working on oracle 10g EE(10.2.0.4).I am having a very difficult database switchover case in my hand.
1.> There are two database .one primary(prim) and another standby(standby).
2.> Initially both of them was configured as oracle data guard, where prim was primary and standby was standby using rman .(RMAN>duplicate target database for
standby dorecover).
3.>But the rate of generation of archivelog is very high( 20 archivelog per hour with 200mb each).
4.> So automatic shipping of archivelog has been disabled from primary.(log_archive_dest_state_2=defer and nullifying the value of log_archive_dest_2).
5> Now after a period of time archived logs are shipped to dr site manually and applied manually.(alter database recover automatic standby database;)
6.> Now there is a hardware problem occured at primary..it will take 72 hours to come up.
How can i use standby database as primary for that 72 hour.As archive log apply is manually done and parameters are being changed,can i switch over these two?
Is it possible to switchover and switch back these two database with such a configuration?How can i use standby database as primary for that 72 hour.As archive log apply is manually done and parameters are being changed,can i switch over these two?
Is it possible to switchover and switch back these two database with such a configuration?
As of now you can perform failover your standby to primary database. you should have flashaback enabled, so you have to create a restore point.
Then it can be opened in read & write mode, So once you finished again you can go back to that point.
http://docs.oracle.com/cd/B19306_01/server.102/b14239/manage_ps.htm#i1017111
The above case applicable if you ready to loose, But it doesnt make sense. But in your case this doesnt work. Because once you start use of Standby as primary, there would be live/production data, which you need very much.
So there is lot of work to do.
You have to rebuild standby database and then switchover back to same location. So its a little trip work.
Have you enabled Dataguard Broker ?
Edited by: CKPT on Mar 13, 2012 1:43 PM -
Transfering archive logs in standby database
hi,
i am trying to create a standby database for a a test scenario using oracle 10g R2 and windows xp
Primary DB = primary
standby DB=stby
iam able to ping databases from each other using tnsping , but iam not able to transfer archive logs from primary to standby
pfile for primary is
primary.__db_cache_size=67108864
primary.__java_pool_size=4194304
primary.__large_pool_size=4194304
primary.__shared_pool_size=88080384
primary.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/primary/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/primary/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\primary\control01.ctl','C:\oracle\product\10.2.0\oradata\primary\control02.ctl','C:\oracle\product\10.2.0\oradata\primary\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/primary/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='primary'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=primaryXDB)'
*.job_queue_processes=10
*.log_archive_dest_2='SERVICE=stby'
*.log_archive_dest_state_2=ENABLE
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/primary/udump'
log_archive_dest_1='LOCATION=C:\oracle\product\10.2.0\db_1\database\archive'
log_archive_dest_state_1=ENABLE
LOG_ARCHIVE_CONFIG='DG_CONFIG=(primary,stby)'
pfile from standby
primary.__db_cache_size=75497472
primary.__java_pool_size=4194304
primary.__large_pool_size=4194304
primary.__shared_pool_size=79691776
primary.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\stby.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='primary'
db_unique_name='stby'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=primaryXDB)'
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\udump'
standby_archive_dest='C:\oracle\product\10.2.0\stbyarch'
db_file_name_convert='C:\oracle\product\10.2.0\oradata\primary','C:\oracle\product\10.2.0\oradata'
log_file_name_convert='C:\oracle\product\10.2.0\oradata\primary','C:\oracle\product\10.2.0\oradata'
standby_file_management=AUTOYou do not point to the standby database from your primary, in order to get the archivelogs transfered. You need to set at least the parameter LOG_ARCHIVE_DEST_2 like this:
SQL>alter system set LOG_ARCHIVE_DEST_2='SERVICE=stdby VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=stdby';stdby has to be resolved by the tnsnames.ora on the primary server. Have a look here:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#i67520
That explains all you need to do to create a physical standby briefly.
Kind regards
Uwe
http://uhesse.wordpress.com -
Copy archive log on remote server
Hi guys,
I have Oracle9i server installed on my local pc running on windows xp.
It's configured on Archive log mode. What I'm trying to do is to copy my archive log files to remote pc; and the location in which i want to save my archive log, i can open from my local pc. So, the following are the steps I made:
1 - Create backup of my spfile.
2- open initoradb01.ora which is the backup just created and edit on LOG_ARCHIVE_DEST = ' \\remotepc\orabkp\arch'
3 - STARTUP pfile='c:\initoradb01.ora'
The instance starts without any problem but when archiving is taken a place then the following error is returned
ERROR at line 1:
ORA-16038: log 1 sequence# 30 cannot be archived
ORA-19504: failed to create file ""
ORA-00312: online log 1 thread 1: 'C:\ORACLE9I_BASE\ORADATA\ORADB01\REDO01.LOG'
ORA-00312: online log 1 thread 1:
'C:\ORACLE9I_BASE\ORADATA\ORADB01\REDO01B.LOG'
When archive log location is changed to local pc, then no problem at all.
Would you guys tell me how to solve this problem?
thanksThere are some generic issues with mapped drives,pointed out in this metalink note:
How to Configure RMAN to Write to Shared Drives on Windows NT/2000
Doc ID: Note:145843.1
The basic story is you cannot use LocalSystem (which owns the Oracle processes by default) to write to mapped drives.
Werner -
Archive logs to standby showing odd behavior.
10.2.0.2
HP 11.23
I'm monitoring the archive log transfer of files, and it appeared a little odd...as if the the files are not being applied.
So log into the system manually, and ran:
recover managed standby database cancel;
returned with recovery complete.
THen I issued:
recover managed standby database until cancel;
It asked for the files. I ran AUTO....it did it's thing, each one individually responding that
ORA-00279: change 7313758876671 generated at 04/24/2009 18:54:51 needed for
thread 1
ORA-00289: suggestion : /oraarch/swesc/peregrine_1_21380_640853326.arc
ORA-00280: change 7313758876671 for thread 1 is in sequence #21380
ORA-00278: log file '/oraarch/swesc/peregrine_1_21379_640853326.arc' no longer
needed for this recovery
Showing that it was successfully going through each archive file, applying it.
It did this until it looked for the next file that didn't exist.
This leaving the final log as 21393.
Then I issue an archive log list...
it shows 21357!
What is going ON?!I ran archive log list on both systems to get that information.
after applying all the archive logs from the primary, the standby still showed the same sequence as it did to prior to recovery.
The recovery completed successfully, but archive log list doesn't show any change.
Meaning that before the recovery was run, it was 21357, after recovery was finished, it SHOULD have ready 23193, but it still read 21357.
Edited by: WillyB on May 6, 2009 11:07 AM -
Have i missed any archive log in Standby setup?, im unable to find
Dear All,
I setup standby in Oracle10g.
In my Primary the archive log list shows as
primary>archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\STANDBY\Archive
Oldest online log sequence 30
Next log sequence to archive 32
Current log sequence 32
In my standby the archive log list shows as
standby>archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination C:\PRIMARY\Archive
Oldest online log sequence 31
Next log sequence to archive 0
Current log sequence 32
Have i missed any archive log file?
But in my archive location of the primary i found the archive files from ARC00002_0633898426.001,ARC00003_0633898426.001 to ARC00031_0633898426.001
and in my archive location of the standby i found the archive files from
ARC00002_0633898426.001,ARC00003_0633898426.001 to ARC00031_0633898426.001 and one more extra archive file ARC00032_0633898426.001.
I am getting confused from where i got the archive file ARC00032_0633898426.001 in standby only which is not in primary?
Please clarify this...Please let me know abiut the above issue, i will be thankful to you.
-
Best way of deleting archive logs on standby when backup taken on primary
Hello,
I have a 11gr2 dataguard configuration without the broker.
main problem in my particular situation arises from my FRA size on primary much more than on standby (90Gb vs 30Gb) and in some situations I'm constrained with FRA space on standby.... I'm going to align the FRAs but in the mean time....
can anyone confirm that if I have configuration as in subject with maximum performance mode and I'm not using the broker I should consider a sort of "external" way for archive log deletion on the physical standby?
In fact I'm setting on primary
- retention policy = redundancy 1
- archivelog deletion = applied on standby (without using any "backed up...." option)
Considering the standby it seems from docs that:
- retention policy always wins over deletion policy (so no archive eligible for deletion is deleted if retention is not satisfied)
- I can set on standby archivelog deletion = applied on standby (without using any "backed up...." option)
But it is not clear to me the effect of this config in case this is a standby itself and without any other cascade standby databases
The manual says this has to be met:
1) The archived redo log files have been applied to the required standby databases.
---> what does this mean in case the db is a standby.. met or not met as I have no other cascade standby dependant on this one?
2) The logs are not needed by the BACKED UP ... TIMES TO DEVICE TYPE deletion policy. If the BACKED UP policy is not set, then this condition is always met.
---> I should be ok
So the last question for standby is
- what to set retention policy to?
I have not understood if I set it to "NONE", this means no retention at all or retention for ever....
sometimes I read that there is no policy; in other examples that files will be retained forever (because no file considered as obsolete).... or at least so I understood...
I would like to have a sort of policy on standby where the archive logs can be deleted as soon as they are applied during the continuous media recovery phase...
It seems I can't find a self contained set of configurations across the dataguard....
Thanks in advance.
GianlucaI agree with you.... It is a temporary contingency....
I already stressed the fact that sizes between sites must be quite identical...
we are going towards a production dataguard, migrating from a windows config (without it) to a Linux based config....
but this contingency made me think about these considerations regarding policies and automatic dataguard operations
I also stressed on equal size grow capability for both sites file systems, also for data tablespaces, so that for example in case of high fragmentation we have to avoid a limit situation where
1) a file system full for DR datafiles causes abend of automatic media recovery
2) this generates FRA growth in DR because archive logs are shipped but not applied any more
3) FRA goes 100% in DR and primary cannot ship any more
4) archive logs cannot be automatically deleted on primary because not already shipped
5) FRA full on primary and DB hangs....
Thanks anyway for input -
I have created a psuedo standby. I want to know the latest sequence number of the redo that was applied on the standby. How to get that information? Thanks
Hi Pedro,
I want to know the latest sequence number of the redo that was applied on the standby. http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10823/log_transport.htm
The output shows that the highest registered file is sequence number 10, but there is a gap at the file shown as sequence number 6:
SQL> COLUMN FILE_NAME FORMAT a55
SQL> SELECT THREAD#, SEQUENCE#, FILE_NAME FROM DBA_LOGSTDBY_LOG L
2> WHERE NEXT_CHANGE# NOT IN
3> (SELECT FIRST_CHANGE# FROM DBA_LOGSTDBY_LOG WHERE L.THREAD# = THREAD#)
4> ORDER BY THREAD#,SEQUENCE#;
THREAD# SEQUENCE# FILE_NAME
1 6 /disk1/oracle/dbs/log-1292880008_6.arc
1 10 /disk1/oracle/dbs/log-1292880008_10.arc -
BLOBS and archive logs and standby
Hi,
1-are the informations about BLOBS registered in archivelogs ?
2-is there any issus for dataguard standby if there are BLOBS in primary DB ?
Many thanks.Hi,
Upto my understanding BLOBS are registered.There wont be any impact on the standby database.
Regards
MMu -
Physical standby in archive log mode
HI ,
Our phyiscal standby database is running in archive log mode,
1.Is it manadatory to have it in archive log mode ?
2.As it is in archive log mode , does it produce any archivelog ?Hello again;
The Standby is a clone of the Primary. I assume we are talking Physical Standby.
Why does it need to produce archive in standby role?Its does not produce archive in the Standby role. I have seen a Standby produce a log now and then, but not log after log like a primary. A Standby database does not write Redo or use Redo logs, it uses Standby Redo logs. Since Redo logs are not used, archive is not written.
Why it is manadatory to enable archive log in standby?Smart design I'm thinking. Why would Oracle make us add this complex step to a failover/switchover?
Keep it simple if possible.
Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-02
Database Concepts
http://docs.oracle.com/cd/E11882_01/server.112/e25789/process.htm
Best Regards
mseberg -
Could u tell me last applyed archive log in disaster recovery server
Hi DBA'S,
we are using oracle 9.2.0.8 my production database has dr(our dr is not a stand by it is created in diff way) server every time one cron job sync the database and transfer the new logs from production server to dr server. i want to know last applied archive in dr server.
i am using this query select max(sequence#) from v$log_history; it is showing same results in boath production and dr when ever we backup 2 days before archive to some backup directory sync is going to fail
please tell me correct query to find out the last applied archived log in dr server
Thanks&Regards
Tirupathiwe are using oracle 9.2.0.8 my production database has dr(our dr is not a stand by it is created in diff way) server every time one cron job sync the database and transfer the new logs from production server to dr server. i want to know last applied archive in dr server.i am using this query select max(sequence#) from v$log_history; it is showing same results in boath production and dr when ever we backup 2 days before archive to some backup directory sync is going to fail
please tell me correct query to find out the last applied archived log in dr server>
As you are running cron job to bring the dr in sync, i suppose v$log_history might give you the wrong results.In your case check :-
select sequence#,applied from v$archived_log where applied='YES';
select max(sequence#) from v$archived_log where applied='YES';Would like to know, why manual recovery (archive logs being manually applied) is being performed, and not automatic.
In case you switch to automatic below query would be useful :-
select al.thrd "Thread", almax "Last Seq Received", lhmax "Last Seq Applied"
from (select thread# thrd, max(sequence#) almax
from v$archived_log
where resetlogs_change#=(select resetlogs_change# from v$database)
group by thread#) al,
(select thread# thrd, max(sequence#) lhmax
from v$log_history
where first_time=(select max(first_time) from v$log_history)
group by thread#) lh
where al.thrd = lh.thrd;Refer [http://aprakash.wordpress.com/2010/07/21/use-of-varchived_log-and-vlog_history-on-physical-standby/]
HTH
Anand
Maybe you are looking for
-
ITunes is taking ages to boot and wont detect my devices please help
I am having major issues with iTunes. Im running on a Dell inspiron 1525 with running iTunes Windows Vista 32bit. My devices are iPhone4 and iPad3 all running 5.1.1. And there are no other devices connected or any other accounts open on laptop. And i
-
How can I determine what is the minimum SCN number I need to restore up to.
Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database? For example: I do a database restore. restore databa
-
How to use common access card (CAC) reader with Mozilla Firefox?
Please provide information on how to update Mozilla Firefox settings to allow common access card (CAC) reader digital certificates, thank you.
-
From Pagemaker 7 to Indesign CS4
My employer is looking to upgrade from Pagemaker 7 to Indesign CS4 for our publication needs. I have Indesign CS2 at home, so it definitely looks like Indesign will make things easier. However, the main publication we will be using in Indesign relied
-
Purchased a Digital Download of CS5, get Access Denied message
I've just purchased a digital download of Adobe Photoshop CS5 for a Mac, and the online company has given me the links and key for the download. However, following the company's directions after downloading the Adobe Download Assistant, clicking on t