Copy archive log on remote server
Hi guys,
I have Oracle9i server installed on my local pc running on windows xp.
It's configured on Archive log mode. What I'm trying to do is to copy my archive log files to remote pc; and the location in which i want to save my archive log, i can open from my local pc. So, the following are the steps I made:
1 - Create backup of my spfile.
2- open initoradb01.ora which is the backup just created and edit on LOG_ARCHIVE_DEST = ' \\remotepc\orabkp\arch'
3 - STARTUP pfile='c:\initoradb01.ora'
The instance starts without any problem but when archiving is taken a place then the following error is returned
ERROR at line 1:
ORA-16038: log 1 sequence# 30 cannot be archived
ORA-19504: failed to create file ""
ORA-00312: online log 1 thread 1: 'C:\ORACLE9I_BASE\ORADATA\ORADB01\REDO01.LOG'
ORA-00312: online log 1 thread 1:
'C:\ORACLE9I_BASE\ORADATA\ORADB01\REDO01B.LOG'
When archive log location is changed to local pc, then no problem at all.
Would you guys tell me how to solve this problem?
thanks
There are some generic issues with mapped drives,pointed out in this metalink note:
How to Configure RMAN to Write to Shared Drives on Windows NT/2000
Doc ID: Note:145843.1
The basic story is you cannot use LocalSystem (which owns the Oracle processes by default) to write to mapped drives.
Werner
Similar Messages
-
Procedure to delete archive log from standby server
Hi
We are using oracle10g(10.2.0.3) and we configured dataguard .
I want to know procedure to delete applied archive log from standby server?
Thanks
With Regards
umair[Delete Applied Archivelogs on Standby Database |http://emrebaransel.blogspot.com/2009/03/delete-applied-archivelogs-on-standby.html]
http://tinyurl.com/p2krga
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Archived log to standby server stopped
Hi,
I configured dataguard standby server few weeks ago,
I set log_archive_dest_2='SERVICE=JHRD0107_OFS1 OPTIONAL'
and log_archive_dest_state=ENABLE in primary server,
and very go fine until yesterday, I shutdown my standby server and set the log_archive_dest_state=DEFER,
when I tried to startup again the standby server, and set log_archive_dest_state=ENABLE again,
the archive stop sending the archived log to log_archive_dest_2.
No error was found in alert log of primary and standby server.
It seem that the primary server don't know there is another archive destination..
The database version is 10g 10.2.0.4
Anyone what could be the cause of this?
ThanksHi, Below is the parameter related to archive in my primary server
SQL> alter system set log_archive_dest_state_2=enable;
System altered.
SQL> show parameter archive
NAME TYPE VALUE
archive_lag_target integer 0
log_archive_config string
log_archive_dest string
log_archive_dest_1 string LOCATION=I:\OFSDB\OFS1\archive
MANDATORY REOPEN=300
log_archive_dest_10 string LOCATION=USE_DB_RECOVERY_FILE_
DEST OPTIONAL REOPEN=300
log_archive_dest_2 string SERVICE=JHRD0107_OFS1 OPTIONAL
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
NAME TYPE VALUE
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string enable
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
NAME TYPE VALUE
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string ARC%S_%R.%T
log_archive_local_first boolean TRUE
log_archive_max_processes integer 2
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
remote_archive_enable string true
NAME TYPE VALUE
standby_archive_dest string %ORACLE_HOME%\RDBMS
Thanks for your response.
Vincent -
Recovery/db copy + archive logs
Hi champions,
There is one confusion in recovery of a database. Version 10g.
I have a hot backup (using copy command) of a database(archive log mode) which I’ve taken at 22.00.00 on Sunday.
Now my database is up and running Monday,Tuesday,Wednesday in archive log mode.I have all the archive logs since the last backup(Sunday 22.00) .and my database got crashed on Wednesday 14.00 completely lost everything (CDR files) only archive logs are with me...
Can i recover my database using Sunday’s backup + archive log till the time it crashed.
Regards,
Shitesh ShuklaShukla Shitesh wrote:
Hi champions,
There is one confusion in recovery of a database. Version 10g.
I have a hot backup (using copy command) of a database(archive log mode) which I’ve taken at 22.00.00 on Sunday.
Now my database is up and running Monday,Tuesday,Wednesday in archive log mode.I have all the archive logs since the last backup(Sunday 22.00) .and my database got crashed on Wednesday 14.00 completely lost everything (CDR files) only archive logs are with me...
Can i recover my database using Sunday’s backup + archive log till the time it crashed.
Regards,
Shitesh ShuklaDear Shitesh, you can recover the database by applying all/any archived redo log files you have.
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/ -
Change the location of Archive Logs on standby Server
Can somebody tell me the process how to change the archive logs location for the standby by server. e.g. Its going now to location C:\stby\archives and I want to send it to E:\stby\archives
ThxHi,
Change the STANDBY SPFILE/PFILE Value of <b>standby_archive_dest=E:\stby\archives</b>
see this
http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/init_params.htm#84366
HTH
Regards! -
Need to copy archive log file "arch1_601.dbf" when restore database?
Hi all,
I have the following case:
1) Full hot backup today (Feb-12-2009) in directory /u03/db/backup
2) But ongoing archive log are generated in directory /u02/oracle/uat/uatdb/9.2.0/dbs
3) I need to restore database becuase some data files are missing.
4) Use today ful backup to restore
5) Am I need to copy all archive log files in /u02/oracle/uat/uatdb/9.2.0/dbs to /u03/db/backup because "/u03/db/backup/RMAN" is restore directory?
FANHere is backup scripts:
Run
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/db/backup/RMAN/%F.bck';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
allocate channel ch1 type disk format '/u02/db/backup/RMAN/backup_%d_%t_%s_%p_%U.bck';
backup incremental level 1 cumulative database plus archivelog delete all input;
backup current controlfile;
backup spfile;
release channel ch1;
allocate channel for maintenance type disk;
delete noprompt obsolete;
delete noprompt archivelog all backed up 2 times to disk; -
Logging into remote server - how?
I have Visual Studio installed, along with all the BOE stuff on a virtual machine. I can log into the BOE server successfully in this setup. But now, I need to log into a remote server for more testing. For the life of me, I can't figure out how to do this. This is the code for logging in on the same box
EnterpriseSession = SessionMgr.Logon(boUser.UserName, boUser.Password, boUser.CmsName, boUser.CmsAuthType);
EnterpriseService = EnterpriseSession.GetService("InfoStore");
_infoStore = new InfoStore(EnterpriseService);
_infoStore = (InfoStore)EnterpriseService;
Where do I specify the server I want to log into?
Thanks
JamesHi Adam,
That doesn't work. The remote server has an address of 10.1.2.12, with the server name of BOEDIS01. When I try to log in with the following:
var boUser = new BusinessObjectUser()
UserName = username,
Password = password,
CmsName = "BOEDIS01",
CmsAuthType = "secEnterprise"
public void LoginUser(BusinessObjectUser boUser)
EnterpriseSession = SessionMgr.Logon(boUser.UserName, boUser.Password, boUser.CmsName, boUser.CmsAuthType);
EnterpriseService = EnterpriseSession.GetService("InfoStore");
_infoStore = new InfoStore(EnterpriseService);
_infoStore = (InfoStore)EnterpriseService;
IsLoggedIn = true;
I get the following error:
Unable to log on: Could not connect to server BOEDIS01. Please check that the server name is correct, and that the server is running.
Shouldn't there be an option for designating the location of the server?
Thanks
James -
Archiving logs to remote destinations (NFS)
from version 10.2 oracle requires nfs to be hard mounted even
for log_archive_dest_n destinations. unfortunately when OPTIONAL
destination (hard mounted) is unavailable, archiving and database stops/hangs.
How do you archive to remote locations assuming I do not want to pay
oracle enterprise/data guard license for every backup destination in use ?jarajm wrote:
from version 10.2 oracle requires nfs to be hard mounted even
for log_archive_dest_n destinations. unfortunately when OPTIONAL
destination (hard mounted) is unavailable, archiving and database stops/hangs.
How do you archive to remote locations assuming I do not want to pay
oracle enterprise/data guard license for every backup destination in use ?Which O/s?
If it is Windows, you can map the shared NFS location \\<servername>\folder (to mapped drive, say Z:\) on to the database server and try archiving to the map drive. -
Could u tell me last applyed archive log in disaster recovery server
Hi DBA'S,
we are using oracle 9.2.0.8 my production database has dr(our dr is not a stand by it is created in diff way) server every time one cron job sync the database and transfer the new logs from production server to dr server. i want to know last applied archive in dr server.
i am using this query select max(sequence#) from v$log_history; it is showing same results in boath production and dr when ever we backup 2 days before archive to some backup directory sync is going to fail
please tell me correct query to find out the last applied archived log in dr server
Thanks&Regards
Tirupathiwe are using oracle 9.2.0.8 my production database has dr(our dr is not a stand by it is created in diff way) server every time one cron job sync the database and transfer the new logs from production server to dr server. i want to know last applied archive in dr server.i am using this query select max(sequence#) from v$log_history; it is showing same results in boath production and dr when ever we backup 2 days before archive to some backup directory sync is going to fail
please tell me correct query to find out the last applied archived log in dr server>
As you are running cron job to bring the dr in sync, i suppose v$log_history might give you the wrong results.In your case check :-
select sequence#,applied from v$archived_log where applied='YES';
select max(sequence#) from v$archived_log where applied='YES';Would like to know, why manual recovery (archive logs being manually applied) is being performed, and not automatic.
In case you switch to automatic below query would be useful :-
select al.thrd "Thread", almax "Last Seq Received", lhmax "Last Seq Applied"
from (select thread# thrd, max(sequence#) almax
from v$archived_log
where resetlogs_change#=(select resetlogs_change# from v$database)
group by thread#) al,
(select thread# thrd, max(sequence#) lhmax
from v$log_history
where first_time=(select max(first_time) from v$log_history)
group by thread#) lh
where al.thrd = lh.thrd;Refer [http://aprakash.wordpress.com/2010/07/21/use-of-varchived_log-and-vlog_history-on-physical-standby/]
HTH
Anand -
10gr2 standard edition standby question - archive log shipping
Hello,
I have 2 servers with 10gr2 standard edition, one is production(primary) and secondary is standby on windows platform. To keep standby synchronized i use a script to copy archived logs from primary to standby and applying manually (with scripts).
My question is: can i use redo transport service in order to copy archivelogs from primary to standby ?
Thank you in advance.Hi,
It is a bit of topic.
According to the Licensing Document page 10 DataGuard is not supported for standard edition.
http://download.oracle.com/docs/cd/B28359_01/license.111/b28287.pdfRegards,
Tycho -
Will RMAN delete archive log files on a Standby server?
Environment:
Oracle 11.2.0.3 EE on Solaris 10.5
I am currently NOT using an RMAN repository (coming soon).
I have a Primary database sending log files to a Standby.
My Retention Policy is set to 'RECOVERY WINDOW OF 8 DAYS'.
Question: Will RMAN delete the archive log files on the Standby server after they become obsolete based on the Retention Policy or do I need to remove them manually via O/S command?
Does the fact that I'm NOT using an RMAN Repository at the moment make a difference?
Couldn't find the answer in the docs.
Thanks very much!!
-garyHello again Gary;
Sorry for the delay.
Why is what you suggested better?
No, its not better, but I prefer to manage the archive. This method works, period.
Does that fact (running a backup every 4 hours) make my archivelog deletion policy irrelevant?
No. The policy is important.
Having the Primary set to :
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBYBut set to "NONE" on the Standby.
Means the worst thing that can happen is RMAN will bark when you try to delete something. ( this is a good thing )
How do I prevent the archive backup process from backing up an archive log file before it gets shipped to the standby?
Should be a non-issue, the archive does not move, the REDO is transported and applied. There's SQL to monitor both ( Transport and Apply )
For Data Guard I would consider getting a copy of
"Oracle Data Guard 11g Handbook" - Larry Carpenter (AKA Dr. Paranoid ) ISBN 978-0-07-162111-2
Best Oracle book I've read in 10 years. Covers a ton of ground clearly.
Also Data Guard forum here :
Data Guard
Best Regards
mseberg
Edited by: mseberg on Apr 10, 2012 4:39 PM -
"I have one workstation with static IP, Wants to create batch file to log in to this,using user name and password, copy back up files from that workstation to my desktop with batch file, please help
I am currently using batch file for back up for domain servers with robocopy commands in batch file but one of the workstation is not in domain and has static ip , also it has username and password,
Wants to create batch file on my desktop to log in this server---with username and password,, copy files from particular folder and paste it on my desktop in particular folder or auto create that folder,
please help, "
P DaveJRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
JRV,
I can understand that, 1stly I am not a scripting guy, I know very very basic of this,
2ndly, I need help , I am not asking anyone here to write code for me, I have already wrote that but its not doing which its suppose to do,
check below screen shot, after running suggested script, it has mapped drive ,
now I do not want to do that, I want just files to copy from that machine to my machine, and want script which I can run from any PC,
Tried with UNC PATH as well, but not making any difference, its keep mapping that server drive to my computer
P Dave
Bill - he still sees that "connection" although it isn't mapped it is attached temporarily.
P - Log off and log back on and the attached connection will be gone. It is temporary. Again - knowing the basics of WIndows would let you know this.
We have given you all of the answers that are possible. There is no other way unless you have installed things like PowerShell and PowerShell remoting or an FTP server.
If you do use a drive it can be just as easily deleted after you have finished the copy.
Again: "NET USE /?" will tell you all of the options.
Saying you know nothing is not an excuse for not thinking or looking more deeply into the suggestions made by those trying to help you. This is not a MIcrosoft support forum or help desk. It is a forum for admiinistrative scripting and assumes
that those coming here are technically trained or experienced in the basics of Windows technology.
¯\_(ツ)_/¯ -
Log on to remote server and start database -error while installing CI in HA
Hello All,
We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node. Please find the log below.
TRACE 2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25742
INFO 2011-06-10 16:31:45.835
CJSlibModule::writeInfo_impl()
Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
WARNING 2011-06-10 16:31:46.345
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
Database PE2 must be started on remote server
Log on to remote server and start database
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2011-06-10 16:31:46.355
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25793
ERROR 2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </p> </body></html>
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly let us know how to rectify the error and prroceed further with the instalaltion.
Thanks
RishiDear Guys,
we didnt change the date and time but i m very sure it is same trans.log file.
for your kind information please note SID and Nodes details
Sid (PE2)
DB Node : DBMDB001
CI Node : DBMCI001
also i am attaching starting part of the file.
4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.11.2010 - 03:44:06
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Nov 7 03:44:06 2010 295 0.000295
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000317
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 116 0.000433
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
4 ETW000 64 0.000497
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 32161 0.032658
4 ETW000 [dev trc ,00000] Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
4 ETW000 39 0.032697
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 111 0.032808
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
patchlevel (0.25)
4 ETW000 265 0.033073
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 41 0.033114
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 82 0.033196
4 ETW000 [dev trc ,00000] New connection 0 created 52 0.033248
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.033289
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 84 0.033373
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 31 0.033404
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.033441
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 601 0.034042
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 25 0.034067
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 35674 0.069741
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
4 ETW000 57 0.069798
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 55 0.069853
4 ETW000 [dev trc ,00000] Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
151208)
4 ETW000 34 0.069887
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 52 0.069939
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 58 0.069997
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.070037
4 ETW000 [dev trc ,00000] Allocating server context handle 27 0.070064
4 ETW000 [dev trc ,00000] Attaching to DB Server PC1
(con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
4 ETW000 63 0.070127
4 ETW000 [dev trc ,00000] Assigning server context 0x600000000106de78 to service context
0x600000000106aa68
4 ETW000 60612 0.130739
4 ETW000 [dev trc ,00000] Allocating user session handle 97 0.130836
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0,
usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 64 0.130900
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 9302 0.140202
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
4 ETW000 198 0.140400
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;
4 ETW000 38 0.140438
4 ETW000 [dev trc ,00000] CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
erroneous calls
4 ETW000 291 0.140729
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
4 ETW000 33 0.140762
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 35 0.140797
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 937 0.141734
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.141770
4 ETW000 [dev trc ,00000] Connected to session 297. 639 0.142409
4 ETW000 [dev trc ,00000] Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
4 ETW000 38 0.142447
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 37 0.142484
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 36 0.142520
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 327 0.142847
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 36 0.142883
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 728 0.143611
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 38 0.143649
4 ETW000 [dev trc ,00000] Rolling back transaction ... 31 0.143680
4 ETW000 [dev trc ,00000] Closing user session
(con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
4 ETW000 210 0.143890
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 721 0.144611
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
700 151208)
4 ETW000 40 0.144651
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 37 0.144688
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 37 0.144725
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 35 0.144760
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 40 0.144800
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 337 0.145137
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 4085 0.149222
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
4 ETW000 63 0.149285
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 37 0.149322
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 585 0.149907
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.149943
4 ETW000 [dev trc ,00000] Connected to session 297. 350 0.150293
4 ETW000 [dev trc ,00000] Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
session_id=297.
4 ETW000 38 0.150331
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.150369
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 34 0.150403
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 294 0.150697
4 ETW000 [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
4 ETW000 66 0.150763
4 ETW000 [dev trc ,00000] ETER
4 ETW000 34 0.150797
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 329 0.151126
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 856 0.151982
4 ETW000 [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
4 ETW000 36 0.152018
4 ETW000 [dev trc ,00000] DB instance PC1 is running on scmdb001 with ORACLE version
10.2.0.4.0 since NOV 07, 2010, 03:23:10
4 ETW000 349 0.152367
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.152405
4 ETW000 [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
FROM V$DATABASE -
How do I copy and paste files from a windows remote server to my mac?
How can i copy and paste files from a remote server (windows) to my mac? i have installed cord to connect to the server but now i can´t cpy the files to my mac!
Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908) -
CREATE file, SAVE a copy on local mechine, UPLOAD a copy to remote server
Hi all,
I have a question to ask here, i am developing a pure java app (client/server) which hopefully can
1) client > create a file (abc.txt for e.g) save a copy in local mechine,
2) upload the file to remote server that currently connected (consider store in server?)
3) than remove the copy in local mechine
-OR-
1) create a document with JTextPane, when click on "Save" button,
2) the file will upload ( through ftp and created abc.txt in remote server)
Is this possible with java application?Thanks,
but do you have any idea,
how these things can happend...
perhaps i can get some concept from you...about the program design and how the flow of the program..that could make file tranfer...to remote server.
regards
Maybe you are looking for
-
Single User Unable to use Mail
Running Snow Leopard Server on a Mac Mini, hosting our own email. I've got about 25 email accounts setup, and all have been functioning swimmingly for months. Earlier this week, for no reason that I can think of, one account started malfunctioning. T
-
Why is the file printing 20 percent smaller?
I'm on a Power Mac, Yosemite, Photoshop CC 2014, printing to a Canon inkjet; size of paper is 13x19" borderless printing but all of a sudden the image is reducing 20 percent. I checked in the print box and scale to fit is not checked. There is no ble
-
Iconia 8 ONE (B1-810) --- Inadequate Volume Range from Internal Speaker
Apologies for the lengthy post. I've seen this question posted before but never really answered in terms of a fix. So here goes: I own an entry-level Samsung Tab III but I'm totally new to Acer. My issue/question has to do with the narrow volume rang
-
Can we upload more than 1000 records with BPS file upload pf
We are using file upload functionality in BPS. Can we use this function to upload around 80,000 records at a time. We are unable to upload more than 1000 records because throws a time out error. Is there a setting that we can change to resolve this?
-
Deleting the flashback recovery area and the files (Oracle 10g on Solaris 8
Hi, We have a dev. db which is small about 3 gb in all (crd files). for this I had enabled flashback and also put it in archivelog mode. then the db_recovery_file_dest_size grew to 3 gb. since space is an issue, I turned off the flashback feature. (b