Archives shows web page information

I am trying to hide my info and I have been able to hide the web address and rename it thru Godaddy.
The archives button and the search button shows my dot Mac info.
Is there a way of hiding the info from those two search buttons.
I have removed both buttons to avoid the issue for the Time being.
Any thoughts or web info site I can go to ??
Greg

The information page must contain end point wise information displayed.
Each end point information contains web service address, WSDL address(you are looking for this I hope), Implementation class etc.
Also, try giving *?wsdl* parameter at the end of your web service address, it must lead you to the WSDL file of the web service.
-typurohit (Tejas Purohit)

Similar Messages

Will not show web page on windows high contrast

Hi,
Am running Windows 7 64bit
my problem is as follows.
I normally run Windows in high contrast mode and would prefer all web sites to be on the dark side.
Occasionally I need to be able to see a web page as its designers intended it to be.
So I want to have the text white and background black and then the ability to toggle between that and the web page's own colour scheme.
Thought I'd found exactly what I needed in the add-on "Toggle Document Colors 1.0"
Am presuming it toggles the status of the "Allow pages to choose their own colours..." tick box.
This setting seems to get lost when FF closes. Even if I set the tick box myself and then close FF it is gone when I reopen FF.
If the box is ticked and a page refreshed it still does not show web page colours ?
Without any addons at all after a reset and only using the colours dialog I cannot get it to behave.
If you start in Windows white mode (normal) things are better even after FF close. Change to Windows black mode (high contrast) things start off ok then after you close FF it will not work
If there is a solution I would love to know it.
Will settle for a workaround.
Considered using old version of FF, but this is not really a good idea.
Really don't want to go back to IE
in hope ... Bob

iTunes does not yet support Windows 8, so there may not be a fix until such time as Apple releases a version of iTunes that does support 8. You can search this forum for "windows 8", though, and perhaps you'll find a suggestion in one of the other threads on the issue.
Regards.

Firefox does not show web page graphics or icons, mostly blanks or boxes with type.

With one of the recent updates, Firefox shows web pages without the clickable graphics, such as this page (Ask a New Question) where above the details box, there are only two vertical lines. I know there should be something in those spaces, cause when I click in them something happens - like a dialogue box pops up or a word gets inserted into this typing. This is consistent on all web pages. Major photos show, just not the little graphics. Icons or graphics that are visible sometimes are offset (ex: this page has an arrow in a green box over lapping the outline of the Search Firefox Help box). Other than that, this page has only two other graphics, it's all type. Thanks.

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

URL for WSDL only shows web service information page

Using tomcat6 and jwsdp 2.0.
After requesting the WSDL, I instead get the Web Service information page which shows this in a table form:
Web Services,
Port Name, Status, Information
etc.
Why doesn't it give me back the WSDL instead?

The information page must contain end point wise information displayed.
Each end point information contains web service address, WSDL address(you are looking for this I hope), Implementation class etc.
Also, try giving *?wsdl* parameter at the end of your web service address, it must lead you to the WSDL file of the web service.
-typurohit (Tejas Purohit)

IE 8 shows web pages as Local Intranet

My computer runs Win Xp3 SP3 and IE8.. My issue is that 90% of my web pages when browsing are shown as local Intranet ones and NOT Internet pages as I would expect. I don't have an Intranet, or so I believe. One computer,wired to modem to
Phone line thats it.
I do have laptops that wirelessly connect to modem but not permanantly nor have I set them up as a network with the main computer. They show all sweb site pages as "internet."
This local intranet ident is alarming me as I am worrying that someone is now able to look over my shoulder and see what I am doing ie shopping on line, paying bills, credit cards etc.
Should I be worried??
Cheers
Bob

Here are some rules that determine a site belongs to the Local Intranet Zone, I suspect that some of your settings cause the wrong determination, please check the following rules.
Direct Mapping
The PlainHostName rule (aka "The Dot rule")
The fixed Proxy Bypass list
(WPAD) Proxy Script
Detailed information is described in the following articles
The Intranet Zone
http://blogs.msdn.com/b/ieinternals/archive/2012/06/05/the-local-intranet-security-zone.aspx
The Local Intranet Zone and Proxies: The Surprising Connection
http://msdn.microsoft.com/en-us/library/bb250483(v=vs.85).aspx
Yolanda
TechNet Community Support

Not showing web pages

Firefox is not showing any page; all the content is in absolute white; the source code is the same. The Antivirus and the spyware is not detecting any issue in the machine. The others browsers are working normally. I tried to unnistall the software, reinstall, update and nothings solve the problem.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
* http://kb.mozillazine.org/Error_loading_websites

Ios not showing web pages correctly

Anyone know why some database driven web pages show up fine on Macs, Windows, android, linux, etc but not in ios?
This page works fine apart from when viewed on iphone/ipads. The schedule page is blank on iphones/ipads. All browsers
http://www.metrosoccerny.com/schedule.php?seasonid=394

Not sure if this will help or not, but I read a previous post and it mentions DNS settings being configured incorrectly. Take a look at the article that they posted http://macs.about.com/od/faq1/f/browserdns.htm

Show web page within abap web dynpro

Hi,
I am looking for a way to show a web page (like www.google.com for instance) inside an abap web dynpro application.
Any suggestions would be very welcome.
Regards,
Bert

I dont think you can open a Web Browser within a Browser.
But you can call the URL in a new window using the following code;
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
CALL METHOD lo_window_manager->CREATE_EXTERNAL_WINDOW
EXPORTING
    URL            = 'http://www.google.co.in/'
    MODAL          = ABAP_FALSE
    HAS_MENUBAR    = ABAP_TRUE
    IS_RESIZABLE   = ABAP_TRUE
    HAS_SCROLLBARS = ABAP_TRUE
    HAS_STATUSBAR = ABAP_TRUE
    HAS_TOOLBAR    = ABAP_TRUE
    HAS_LOCATION   = ABAP_TRUE
RECEIVING
    WINDOW         = lo_window.lo_window->open( ).

E2500 Shows Web Pages Blank White

This router will display some web sites in blank white pages occasionally. I at first thought the site might have been banned by the IP. Possibly a security setup on my computer. Modem problem. This desktop computer is "wired" to the router. I plugged the computer ethernet wire directly into the modem and the problem went away.
Is this a known issue? If so, is there a fix. If not, any recommendations?
Randy
Solved!
Go to Solution.

Hi rwmol1945,
It's good that you were able to isolate this matter. I suggest that you update the router's firmware. Have you tried using other browsers? I have encountered this one before with my EA4500. Got it resolved by updating the router's firmware. In case updating it won't work, you may proceed on resetting and configuring the router again.
Help, learn and share

How can I change my settings to show web pages in English on Firefox do to I rescently move to Germany and everything opens in German and not English?

I moved to Germany and now all my pages start in German instead of English, how can I fix this?
== This happened ==
Every time Firefox opened
== I move to Germany

Some sites automatically redirect you to a site in the local language.
There is usually a link on such websites choose a language or go to an international version that allows to chose the language.
If the Google (Firefox) or Yahoo home page is in the wrong language then see:
Google: http://www.google.com/support/bin/answer.py?answer=873
Yahoo: http://help.yahoo.com/l/us/yahoo/homepage/troubleshooting/troubleshoot-02.html

How do I save a web page so that someone else can open it?

Sometimes I want to save web pages as archives for future reference. I thought printing as a PDF would be the most widely readable format, but items on the page are often lost and I end up with question marks.
I have just tried "Save As" to a web archive, and that works well in Safari (meaning that Safari can reopen it perfectly), but when I emailed the file to a PC user they couldn't open it. I assumed a web archive format would be readable by any web browser; obviously that's not the case.
How do I archive a web page so that it is universally readable without losing any content?

A web-link won't work because the particular page I want to send requires a subscription. The story about this particular page I want to send: four of us are planning a 7-day hiking trip through some Tasmanian wilderness, and we don't go unless the weather forecast is fine. I am subscribed to a weather website, but when I send this link:
http://www.weatherzone.com.au/models/meteogram.jsp?lt=twcid&lc=9350
they don't get the meteograms (graphs of various weather aspects out to 10 days).
So, I want to save the particular page and send it off. In general, though, I simply want to archive certain pages.
In my limited testing it looks like:
• Safari can't save a web page accurately;
• Firefox can, but it generates a separate folder of files ( I would have to combine the two, then zip them, then email);
• iCab may be able to, but I haven't tested it yet.
I didn't think saving a web page, incorporated into a single file, would be so complicated.

Loading mulitple Adobe Flash web pages makes mouse cursor disappear

I have a 2011 Mac Mini with OSX 10.7 Lion Server
Regardless of the Browser used - if I load mulitple Adobe Flash based Flickr photo slide show web pages, after 15 seconds my Mouse Cursor completely disappears and makes navigating the mac rather impossible.
Its really buggy and forces me to click or "right click" (Option Click) randomly on the Desktop with the hope that I might briefly see the cursor return so I can close the browsers.
Does not matter if i use Safari, Firefox or Chrome.
These are the pages in question which give me grief -
http://www.flickr.com/groups/warbirds/pool/with/8032123616/lightbox/
http://www.flickr.com/photos/fluxstreamcommunication/show/
http://www.flickr.com/photos/x-ray_delta_one/show/
must click the "play " to start the slide show, have all three running at the same time.
And withing 10 seconds on my mac mini - NO Curser.
Even if I try to move the mouse outside the Browser display area - to where i clairvoyantly might consider the cursor should be over the Desktop.
Typically results in the invisible cursor accidently creating numerous new folders on the desktop, as I frantically attempt to make the cursor re-appear.
Totally maddening - and I have the Identical problem on Two separate 2011 Macs. (iMac 27 and Mac Mini)
My local Apple Genius Bar support person suggested I back up my data and perform "OSX Recovery"
http://support.apple.com/kb/HT4718
Stating its possble that my Adobe Flash was installed wrong.
I have the latest updates
OSX 10.7.4
Flash Version 11.4.402.265

Update.
This solved the problem
My local Apple Genius Bar support person suggested this sequence and it fixed my disappearing cursor!
1) Back Up personal Data
2) Perform "OSX Recovery"
http://support.apple.com/kb/HT4718
3) Perform the Apple Software update
4) Then install latest Adobe Flash
This fixed my problem!
Now I'll do the same fix for my 2011 iMac 27" with the identical issue.

Strange behaviour on preloading web page in WebView

I have the following problem: In my Swing application i'd like to show a web page. In order to do so i use a JFXPanel that contains a WebView. The web page should be loaded in the background and just if the loading process is totally completed i want to make the JFXPanel visible. I use the getLoadWorker().workDoneProperty() method of the corresponding WebEngine to determine if the page is totally loaded.
The problem is, that at the moment the JFXPanel gets visibile I see at first a totally empty panel, and only after a short time the web page in the WebView is visible. I have made a simple Demo Application that reproduces this behaviour. If the page is loaded a button gets enabled and a click on that button adds the WebView to the panel below. Furthermore the following link points to an animated gif which demonstrates the behaviour: http://tinypic.com/view.php?pic=oh66bl&s=5#.Ujv2IhddWKl
Here is the code of the demo application:
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.util.logging.Level;
import java.util.logging.Logger;
import javafx.application.Platform;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.embed.swing.JFXPanel;
import javafx.scene.Scene;
import javafx.scene.web.WebEngine;
import javafx.scene.web.WebView;
import javax.swing.JFrame;
import javax.swing.SwingUtilities;
public class WebViewTest extends javax.swing.JPanel {
   private static JFXPanel browserFxPanel;
   private WebView webView;
   private WebEngine eng;
* Creates new form WebViewTest
   public WebViewTest() {
initComponents();
   Platform.setImplicitExit(false);
browserFxPanel = new JFXPanel();
   Platform.runLater(new Runnable() {
   public void run() {
webView = createBrowser();
   Scene scene = new Scene(webView);
scene.setFill(null);
browserFxPanel.setScene(
scene);
* This method is called from within the constructor to initialize the form. WARNING: Do NOT modify this code. The
* content of this method is always regenerated by the Form Editor.
   @SuppressWarnings("unchecked")
   // <editor-fold defaultstate="collapsed" desc="Generated Code">
   private void initComponents() {
java.awt.GridBagConstraints gridBagConstraints;
pnlMain = new javax.swing.JPanel();
showWebpageButton = new javax.swing.JButton();
setLayout(new java.awt.GridBagLayout());
pnlMain.setLayout(new java.awt.BorderLayout());
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 0;
gridBagConstraints.gridy = 1;
gridBagConstraints.gridwidth = 3;
gridBagConstraints.fill = java.awt.GridBagConstraints.BOTH;
gridBagConstraints.weightx = 1.0;
gridBagConstraints.weighty = 1.0;
add(pnlMain, gridBagConstraints);
showWebpageButton.setText("show web page");
showWebpageButton.setEnabled(false);
showWebpageButton.addActionListener(new java.awt.event.ActionListener() {
   public void actionPerformed(java.awt.event.ActionEvent evt) {
showWebpageButtonActionPerformed(evt);
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 1;
gridBagConstraints.gridy = 0;
gridBagConstraints.insets = new java.awt.Insets(10, 10, 10, 10);
add(showWebpageButton, gridBagConstraints);
   }// </editor-fold>
   private void showWebpageButtonActionPerformed(java.awt.event.ActionEvent evt) {
pnlMain.removeAll();
pnlMain.add(browserFxPanel, BorderLayout.CENTER);
   WebViewTest.this.invalidate();
   WebViewTest.this.revalidate();
   // Variables declaration - do not modify
   private javax.swing.JPanel pnlMain;
   private javax.swing.JButton showWebpageButton;
   // End of variables declaration
   private WebView createBrowser() {
   Double widthDouble = pnlMain.getSize().getWidth();
   Double heightDouble = pnlMain.getSize().getHeight();
   final WebView view = new WebView();
view.setMinSize(widthDouble, heightDouble);
view.setPrefSize(widthDouble, heightDouble);
eng = view.getEngine();
eng.load("http://todomvc.com/architecture-examples/angularjs/#/");
eng.getLoadWorker().workDoneProperty().addListener(new ChangeListener<Number>() {
   public void changed(ObservableValue<? extends Number> ov, Number t, Number t1) {
   final double workDone = eng.getLoadWorker().getWorkDone();
   final double totalWork = eng.getLoadWorker().getTotalWork();
   if (workDone == totalWork) {
showWebpageButton.setEnabled(true);
   return view;
   public static void main(String[] args) {
   SwingUtilities.invokeLater(new Runnable() {
   public void run() {
   final JFrame f = new JFrame("Navigator Dummy");
f.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
f.setSize(new Dimension(1024, 800));
   final WebViewTest navDummy = new WebViewTest();
f.getContentPane().add(navDummy);
f.setVisible(true);
I don''t understand this behaviour in fact that the page should already been loaded. For mee it seems like the WebView starts renderering the site just at the moment when it gets visible. What can I do to achieve that the WebView already shows the loaded web page at the moment it gets Visible (to avoid this flickr effect)?
I have already posted this issue at StackOverflow (see http://stackoverflow.com/questions/18873315/javafx-webview-loading-page-in-background ) but didn't get an answer there and found this forum today.
Thanks in advance!

Try the updated version in this post.
It forces an offscreen snapshot before displaying the webview to ensure all of the rendering is done before the WebView is displayed.
The code is kind of ugly and the "solution" is a bit of a hack, you would probably want to clean it up a bit before using it anywhere (for example it is unnecessary to create a new WebView and snapshot the web page on every load - I just did that to get a feel for a worst case scenario and to try to pinpoint where slowdowns are occurring).
A small rectangle moves back and forth across the top of the screen so that animation smoothness can be monitored.
On the first load there will be a slight stutter in the animation, however the rendered web page appears instantly when the clicks the "Show page" button.
As you say, the stutter only occurs the first time the page is loaded, subsequently everything is smooth. If you use a regular progress bar rather than an animation, then the initial stutter is likely fine, as people expect to see pauses in progress bars from time to time (most progress reported by progress bars isn't a smooth linear progression). My guess is that, if you use a regular progress bar, the behaviour experienced with this sample is likely acceptable to almost all users.
Regarding the differences between rendering between JavaFX 2.2 and JavaFX 8, there were many modifications to the internal JavaFX architecture for JavaFX 8 that improved the rendering performance, so that likely accounts for the delta.
import javafx.animation.*;
import javafx.application.Application;
import javafx.concurrent.Worker;
import javafx.geometry.*;
import javafx.scene.Scene;
import javafx.scene.control.*;
import javafx.scene.layout.*;
import javafx.scene.paint.Color;
import javafx.scene.shape.Rectangle;
import javafx.scene.web.WebView;
import javafx.stage.Stage;
import javafx.util.Duration;
public class WebViewJavaFXTest extends Application {
    public static final String PAGE_URL = "http://todomvc.com/architecture-examples/angularjs/#/";
    private Rectangle distractor;
    @Override
    public void start(Stage stage) throws Exception {
        distractor = new Rectangle(20, 20, Color.CORAL);
        TranslateTransition r = new TranslateTransition(Duration.seconds(10), distractor);
        r.setFromX(0);
        r.setToX(800);
        r.setInterpolator(Interpolator.LINEAR);
        r.setCycleCount(RotateTransition.INDEFINITE);
        r.setAutoReverse(true);
        r.play();
        VBox layout = initView();
        stage.setScene(new Scene(layout));
        stage.show();
    private VBox initView() {
        final ProgressBar progress = new ProgressBar();
        final Button showWebView = new Button("Show Page");
        showWebView.setDisable(true);
        HBox controls = new HBox(
                10,
                progress,
                showWebView
        controls.setAlignment(Pos.CENTER_LEFT);
        Button tryAgain = new Button("Try Again");
        tryAgain.setOnAction(actionEvent ->
                tryAgain.getScene().setRoot(
                        initView()
        StackPane webViewHolder = new StackPane();
        webViewHolder.setPrefSize(1024, 700);
        final WebView webView = new WebView();
        progress.progressProperty().bind(
                webView.getEngine().getLoadWorker().progressProperty()
        webView.setPrefSize(1024, 700);
        webView.getEngine().load(PAGE_URL);
        webView.getEngine().getLoadWorker().stateProperty().addListener(
                (o, old, state) -> {
                    if (state == Worker.State.SUCCEEDED) {
                        webView.snapshot(
                                snapshotResult -> {
                                    showWebView.setDisable(false);
                                    return null;
                                null,
                                null
                    } else {
                        showWebView.setDisable(true);
        showWebView.setOnAction(actionEvent -> {
            controls.getChildren().setAll(
                    tryAgain
            webViewHolder.getChildren().setAll(webView);
        VBox layout = new VBox(
                10,
                distractor,
                controls,
                webViewHolder
        layout.setPadding(new Insets(10));
        return layout;
    public static void main(String[] args) {
        launch();

Arching in Web Page Composer

hi,
Is it possibe to archive the Web Pages what we create using Web Page Composer.
If possibe then can anyone let me know how to do that, the procedure and how to restore them.
Thanks and regards,
Kris

I don't think that there is any stadard procedure for archiving the web pages.
Raghu

Scan Issues - need internet web page from where to scan

Since purchase of the printer the scanner part of the HP photosmart C7280 has not work. I have been scanning for years using a web page. Unfortunately I accidently deleted the web address recently and now I can't scan.
I press "scan to computer" on printer and receive message "No scan options - refer to scan dovumentation to trouble shoot"
I orignally went through installing and uninstalling the printer software and I don't want to go through that again. Also, I tried to locate the HP print and scan solution fix it software to download and could not find it. I've gone around the web page information for an hour and can't figure out anything to help.
Would love an answer or even a way to talk to a person at HP. can't find a single phone number.
Thanks in advance for any help you can give

Hi @JSLOW91,
Thank you for visiting the HP Support Forums! I see you are running into some scanning problems on your HP Photosmart C7280, you were scanning using a webpage but accidentally deleted the address, when you attempt to use the Scan to Computer option it asks you to refer to the documentation.
First I would like you to run the HP Print and Scan Doctor
-- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
What does the PSDR find, was it able to fix the scanning?
When you say you were scanning from a webpage, do you mean the printers Embedded Web Server (EWS), did you use the printers IP Address to access the webscan? If yes, follow the path below from the front panel of your PS C7280:
Setup Menu > Network > Wireless Network Test
Here you will see the IP address, you can input that into a Web Browser to access the EWS and complete a Webscan.
Please let me know if this helps, I will leave you with the our technical support #- 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Let me know the outcome, I will watch for your reply.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Archives shows web page information

Similar Messages

Maybe you are looking for