ARD 2.2 is a mess... Scanner broken

Apple please get this one right... This software stinks! I've had countless problems with prior versions on 10.3 and 2.1 and now with 2.2 and 10.4 I'm having this issue with the the scanner not picking up all of my clients on my local subnet. It picks up one or two new clients each time I scan. I've even gone through the trouble of installing 2.2 client on each of my 30 computers. I've deinstalled the 2.2 admin app and reinstalling it. All in all things seem faster with adding new clients and the app loading right up, but then other problems have arisen. Apple if you are reading this please make an attempt to write an app that actually works like the rest of your apps.
pulling my hair out,
Scott Dominick

No it can't be right. I am running it on a emac that is 10.3.8 and an ibook running 10.4 Then last security update for 10.3 is only available for 10.3.9
I followed apple's guide to uninstalling apple remote desktop. (http://docs.info.apple.com/article.html?artnum=108021). The i tried reinstalling it. The CD installs but when I put the 2.1 update on it tells me that it is out of date and to update it to the latest version! I guess their uninstall guide doesn't remove all components.
I have someone from apple visiting on friday. I need a fix 3 days ago.

Similar Messages

  • I've got my finger print scanner broken

    I've got my finger print scanner broken. I've got my iphone5s felt down from the bed . After that, the finger print scanner doesn't work as i can't unlock my iphone with my finger print . Also when i try to add another finger print , it said my finger was moved though i din't move my finger . At last, it said try a different finger. I'm pretty sure this is a hardware's problem (the finger print scanner) problem . If i brought my iphone to an apple store, would they fix or change the finger print scanner for me ? Thanks

    To rule out a software issue, try this:
    Reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
    If this does not work, try to set it up as new device, explained in this article:
    How to back up your data and set up as a new device
    If still not luck, contact Apple to get it serviced.
    Apple - Support - Service Answer Center
    Apple does not repair parts of the phone, you'll get a replacement.

  • [LaserJet Pro 200 color MFP M276nw] only vertical lines when scanning, scanner broken?

    Hi all! I have a problem with the scanner in my HP all in one. If I scan (using the printer function or apples ImageCapture: same result) the output is just a lot of vertical stripes (in colors when in color mode). Not a trace of the image I try to scan. The lines are there even if i scan an empty white page. I see the stripes both when doing a preview scan and an actual scan. The problems are very similar regardless of if I use the flatbed or the feeder scanner (they are separate scanner hardware, yes?). I have updated to the latest software for the printer/scanner and I am connecting over bonjour via wireless. I am on Os X 10.9.1. Anybody having similar problems or is my scanner just plain broken? Thanks in advance!Jon

    , , I understand that both of you are seeing vertical lines when scanning from your Laserjet M276nw. First, make sure the printer is plugged directly into a wall outlet and not a surge protector. Now, so I know where to begin I'd need to know the following:If you are seeing the vertical lines when you copy as well as scan?Are you seeing the vertical lines when you copy from the flatbed? The document feeder? both?If you are seeing the lines from both the flatbed and the feeder are they in the same place?Once I know this I'll be better able to assist you.

  • Photosmart 6510 scanner broken?

    My scanner is having the same issue.  I would love to know the steps to reset it!  Thank you.

    Hey @BearLakeNate ,
    Welcome to the HP Forums!
    I see you're having problems with the scanner on your PhotoSmart 6510.
    Can you tell me a little more about what is happening? Are you getting any kind of errors, is there physical damage to the glass or plastic, does the scan output look poor (streak, blurry, all black, blank, etc...)?
    A good test to see if the issue is hardware related is by performing a copy. Place an item in the feeder or on the glass and press the Copy button on the screen. Black or Colour is fine, unless the issue only occurs on one or the other.
    If you are dealing with a scan or copy quality issue please follow the steps in this guide: Vertical Bands, Lines, or Streaks in Copies or Scans.
    If the copy comes out OK we can safely say the hardware is fine, and you're looking at a communication or software issue.
    If a copy fails, reset the printer. Remove the power cord from the back of the product while it is still on. Wait at least 30 seconds and reconnect the power cord. It should turn itself back on. Test the copy function again after the reset.
    If after a reset you still cannot copy ensure the printer is plugged directly into a wall outlet. Sometimes the printer does not get enough power when connected to a power bar, surge protector, or UPS, and will always work best when connected directly to a wall outlet.
    If you have attempted all of these steps and are still unable to produce a copy update the printer firmware. You must have a USB connection to do this. You can download the firmware update utility for your printer here: HP Photosmart 6510 e-All-in-One Printer - B211a Drivers.
    If you can perform a copy fine, let me know which operating system you are using and we will go from there. To see which version of Windows you are using click here: Which Windows operating system am I running?
    I look forward to your reply!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • ARD Crashing Consistently and Constantly ***

    Background: I have over 200 G5's on my campus that I am in charge of. Apple remote desktop makes my job tremendously easier and has become a necessary tool for everyday activities. Until recently, it has become unstable.
    Problem: When the "scanner" is clicked, it searches for approximately 15 seconds then hard crashes (close, report, try again menu pops up) and has to be reopened. If I click on one of my management lists, it works fine. It only crashes when the "scanner" is clicked.
    Tried so far: I have tried completely removing ARD from my system (via apple's instructions) as well as deleting all receipt packages. I have reinstalled numerous times but nothing seems to work. Actually, while in version 2.1, ARD can scan flawlessly but soon as I patch it too 2.2, the scanner hard crashes ARD.
    Information: It has worked fine ever since the 2.2 patch came out. The scanner has worked as well as all functions of ARD. This error popped up about two weeks ago and I have been comabting it ever since.
    Any ideas would be great.
    Do you think I have to reinstall the OS? Again, this is KEY software.
    Thanks
    Jimmy

    I don't know if it will help, but there is some discussion in this thread:
    ARD 2.2 is a mess... Scanner broken
    in regard to the DNS mapping that might provide some clues. I don't know if any of those posts will help, but the thread is worth a readthrough.

  • ARD crashes Postgres on kickstart

    A running, working version of Postgres listening on port 5432 crashes when ARD (agent) is 'kickstart'ed.
    - Postgres version is 8.1.3.
    - ARD version is 3.0.
    - "kickstart" is run from the command line.
    - OS X version is 10.4.7.
    Sound familiar? Pointers, sympathy appreciated.

    Hi Matt,
    found a link to this thread on this site: Topic: ARD 2.2 is a mess... Scanner broken. It's a long one detailing the same problem.
    If you go to the last three or so entries, you'll find a solution to the problem.
    As far as I understand the scanning prob is caused by something going wrong with the DNS entry in the Network pane of the System Prefs. Scanning seems to rely on the entries here - probably it checks and uses the entries to guide its search.
    Without an entry you'll get the crash problem. With an entry it doesn't like you'll also get same. Success was achieved by placing a bogus DNS entry in the DNS pane instead of the one the scanner didn't like.
    I can only guess that if the scanner finds a completely inaccessible DNS in the pane it ignores the pane and continues without it. Perhaps with a certain kind of DNS entry - including no DNS entry - the scanner goes into an unrecoverable loop and the pin is pulled.
    This could perhaps explain the Bad Address being noted as the cause for the crash in your Crash Log.
    Regards,
    Peter C
    PowerBook 15" hi res   Mac OS X (10.4.5)   2 Gig RAM, 120 Gig HD

  • ARD says my client version is too old, but it's not.

    ARD 3.6.1
    On the scanner windows, i see the computer I want to control.
    The icon is pale blue, not blue like others.
    When I double click on my client computer, under ADMIN panel,
    arm says : Your client execute a too old software, it must have ARD 3.3.1 and up in order to...
    The problem is ; this computer have ard client 3.6.2.
    I installed it myself and double checked in system/library/coreservices/remotemanagement
    I also double checked that the client have the right setting in Sharing preferences. (remote management...)
    What should I check next?
    I have 10 computers in my network, all under 10.7.5 or 10.8.2/10.8.3
    I can control 3 of them, not more, all the same problem, and there is some with the black icon.
    Thanks for the help.
    Jean

    You might do better posting in the TC forum here:
    http://discussions.apple.com/forum.jspa?forumID=1253
    You should also update your profile unless you are using 10.5.0, which may be part of the problem, if true.
    Message was edited by: nerowolfe

  • ITunes a mess after copying

    I recently copied my entire itunes folder to an external drive. The folder structure is incorrect and it is a complete mess of broken links which leads me to believe the original has the incorrect structure as well. All the music files are there however.
    I am wondering if there is a way to pull all the files out of itunes and somehow launch a new clean version so that when I put the music back it will structure it correctly and have the correct links?
    There are 1000 albums. All uncompressed.
    Thanks in advance.

    you could try the technique described in this support article.
    JGG

  • Scanner is misssing edge of image

    Scanner B210a has been working fine but is now missing 1/2 inch of front edge when reprinting photos.
    Curious though, when scanned from computer we get all the image.
    Tried restoring factory defaults and switching off and on a few times - no effect.
    Is my scanner broken?

    Hi there,
    Thanks for the reply. Yes, it's the very outer edge. But it's present on the top and bottom edge. I thought it was the over scan issue but since it only happens with some clips, i was not sure anymore. The footage came from DigiBeta transfered from film. This will go in DVD for an installation via a projector.
    Should i just leave it or try to fix it ??? If i crop, would'nt it leave a bigger space at the top-bottom....i thought to scale it so i can make the edge dissappear. Thanks

  • Updating Content Type from other metadata field

    Hi.
    In the process of creation of metadata fields a customer use a custom metadata field called 'class' to define what type the content are. The field Content Type was leave untouchble. Now they have tons of content in the same folder inside vault cause content server uses the metadata content type to create vault subfolders. What is the best way to eliminate the field class, transporting the metadata to the correct field content type and mantain the correlation of the links to the native files and weblayout files of the content? If I just update the column content type with the data in column class I believe that willl be a mess of broken links. Can anyone suggest anything?
    Thank you!

    Hi there,
    Thought i could not comprehend all that you want, I could get that you have problem with a meta data filed.
    Instead of using "Content Type" earlier contributors used "class" and now you want to chagne the "class" field with appropriate value of "Content Type".
    This can be done provided the original "class" type was used intellegently by using following steps
    1) depending on various values of class(e.g. all document for which class=A) created exports using archiver, also deleted them same time.
    2) Import the archiver created in step one and prove an input map for the "class" field to appropriate value as "Content Type"(content type =B)
    In this way all content items with class=A would be converted into content type=B.
    Hope that helps you.
    regards,
    sapan

  • Where is Find and Replace?!?

    I have been using DW 8 on my computer (Apple OS 10.4.11)
    successfully for about a year. Just this week the Find and Replace
    function stopped working. I can press Apple + F and I get nothing,
    no popup windows or anything. I can go to Edit>Find and Replace
    and I get nothing. If I go to Edit> Find Selection I get the
    popup window, but it doesn't have anything in it and I don't see a
    way to get the Find and Replace screen to popup from there. I have
    restarted my computer and DW several times. Anyone know how to fix
    this?

    Try this:
    1. in SiteManager, EXPORT the current site's definition.
    2. REMOVE the site.
    3. IMPORT the definition you just exported.
    Better now?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "joat-mon" <[email protected]> wrote in
    message
    news:g4dt4h$7vu$[email protected]..
    > I'm using DW CS3 on WinXP and am recently having the
    same problem. Find
    > and
    > Replace has become unreliable. It finds some code to
    replace, but ignores
    > most
    > of the files. I now have to open each file manually and
    search it.
    >
    > I don't know how if this is related, but Dreamweaver
    seems as if it does
    > not
    > recognize that the local folder where all my files are
    is the web site. I
    > can
    > no longer reliably sync the remote site. I have to put
    each file
    > individually.
    > In other words it often ignores the fact that older
    files are on the
    > published
    > website, but it ignores some, warns about others, and
    syncs a few. I end
    > up
    > with a mess of broken links.
    >

  • Is there any plan on cleaning this forum up?

    If not can anyone recommend another source for ARD discussion.

    It is a mess to say the least, makes it very hard to try and help ARD users
    The same problem is creeping into other forms to

  • Non-Controllable Device Sound Drift

    My wife is a dance teacher who recorded some of her choreography using our Sony DVR-PC100. Unfortunately for me she "needs" to rewind the tape and review each take to make sure it is good before proceeding to the next dance. Since the tape I'm given to capture is a mess of broken timecode, I decided to use capture settings for a non-controllable device. The problem that I'm running into is the sound on the captured clip has drifted. I had run into a similar problem in the past when I was capturing and Hi-8 tape using a Sony DCR-TRV480 Digital 8 camera. Since the solution in that case was to set the camera output to 16-bit, I checked the audio settings on the PC100 and found that it is set to 12-bit (which doesn't seem to be a problem when device control is set to Firewire NTSC). I changed the audio setting on the PC100 and recaptured the footage but the sound was still drifting. Why this was still happening didn't make sense to me until I realized that changing the audio setting on the PC100 wasn't going to change the fact that the audio was originally recorded in and still was 12-bit audio. I believe the TRV480 is different because with the analog tapes I was capturing it was digitizing the video on the fly. My question (I apologize for my long-winded explanation) is there a way to capture the broken timecode footage shot with 12-bit audio without getting audio drift. The only solution that I can think of is put the original tape in another camera and output analog footage into the PC100 with the audio set to 16-bit. I should end up with a DV tape with continuous timecode and 16-bit audio. I think I would be OK with 12-bit audio at this point because I would have continuous timecode. Thanks in advance

    The camera output is not relevant, only that the tape was actually recorded at. Was this material recorded at 32k or 48k, that is was it 12-bit or 16-bit? Whichever it is that's the setting you have to use in FCP.

  • Deleting imported tags--does that apply across all catalogs?

    I'm building a brand-new catalog in Elements Organizer 12.  My first attempt turned into a hot mess with broken links, etc (I started it before I really figured out how Organizer works).
    Organizer is listing a bunch of imported keyword tags on my new catalog.  They don't appear to be attached to pictures in my new catalog, but they're listed under imported tags.  As the purpose of creating the new catalog was starting from scratch, I'd like to clean up those old tags.
    My question is: will deleting those tags also delete them from photos from the original (hot-mess) Organizer catalog?  I'm not ready to delete that old catalog yet, and I'd prefer to leave them attached to the photos in the old catalog for the time being.
    Thanks for any help!
    Julie

    If you find the tags in the 'imported tags' category are really written to the files themselves, it would be better to move those tags from the 'imported tags' category to a more suitable category. If you deleted those imported tags from the catalog, that will not delete the tags from the files themselves, which is generally a good thing. But there will be no way to get them back in the catalog afterwards. The tags in the files are recognized only at the time of import into the catalog. If the tag is in your categories by that time, no problem. If you have no corresponding tag at the time of import, the tags are imported in the default 'imported tags' category.

  • Cracked ibook G4 screen

    About 3 months ago, a 4-inch thick picture frame fell off the top of my desk and landed onto my iBook G4. At first, it was just a light, barely visible crack but over time, it has become a complete mess of broken pixels and now more than 50% of my screen is a complete magenta/purple mess and I can barely see. I know that since it was technically my fault that Apple will not be able to cover it, but I wondered if anyone knew how much it might be to replace the screen or if it would just be in my best interest to get a new MacBook? Thanks for any help I receive.

    Hi rsulli,
    Apple will charge you a lot to replace the LCD.. you're looking at at least USD$300.
    If you're good with your hands however, you can buy replacement LCD's for iBooks for under USD$100 from eBay. The display assembly (ie, hinge, cables, etc) is different between the G3 and G4, but the actual panel is the same, so if you buy any of them, you'll be able to make it fit.

Maybe you are looking for